<PAGE>
FORM 10-K/A
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
AMENDMENT 1 to Form 10-K of December 31, 1996
The following sections were amended:
Page 25 - Amended "Note 1 - Unaudited Pro Forma Net Loss Per Share" to clarify
the treatment of stock options in the calculation of earnings per
share.
Page 26 - Amended "Note 3 - Inventories" to include a paragraph addressing
inventory reserves.
Exhibit 11 - Amended "Weighted average common shares outstanding" regarding APB
15 and included footnote disclosure.
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the Fiscal Year Ended December 31, 1996 Commission file number 0-28492
-----------------
- -------------------------------------------------------------------------------
INNOVASIVE DEVICES, INC.
- -------------------------------------------------------------------------------
(Exact name of registrant as specified in its charter)
Massachusetts 04-3132641
- -------------------------------------------------------------------------------
(State or other jurisdiction of (I.R.S. Emp
incorporation or organization) Identification No.)
734 Forest Street, Marlborough MA 01752
- -------------------------------------------------------------------------------
(Address of principal executive offices)
Registrant's telephone number, including area code 508/460-8229
N/A
- -------------------------------------------------------------------------------
Former name, former address and former fiscal year, if changed
since last report.
Securities registered pursuant to Section 12(b) of the Act: NONE Securities
registered pursuant to Section 12(g) of the Act: COMMON STOCK $.0001 PAR VALUE
Indicate by check mark whether the registrant (1) has filed all reports required
to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during
the preceding 12 months (or for such shorter period that the registrant was
required to file such reports), and (2) has been subject to such filing
requirements for the past 90 days. Yes X No
--- ---
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405
of Regulation S-K is not contained herein, and will not be contained, to the
best of registrant's knowledge, in definitive proxy or information statements
incorporated by reference in Part III of this Form 10-K or any amendment to this
Form 10-K. [ ]
The aggregate market value of the voting stock held by non-affiliates of the
Registrant, based upon the closing price of the Common Stock on March 20,
1997, on the Nasdaq Stock Market, was approximately $32,862,998. Shares of
Common Stock held by each officer and director and by each person who owns 5% or
more of the outstanding Common Stock have been excluded in that such persons may
be deemed to be affiliates. This determination of affiliate status is not
necessarily a conclusive determination for other purposes.
As of March 20, 1997 the Registrant had 7,262,016 shares of Common Stock
outstanding.
<PAGE>
Part I
Item 1. Business
General
The Company designs, develops manufactures and markets proprietary tissue repair
systems which facilitate the repair of soft tissue injuries. The Company's
tissue repair system are designed to be used in either open surgical or
minimally invasive arthroscopic procedures. Performing repairs arthroscopically
offers several benefits, including reduced patient trauma and shorter
rehabilitation times, resulting in an expedited return to full physical
activity. The Company's initial products consisted of the ROC(TM) (Radial Osteo
Compression) family of suture fasteners and related arthroscopic instruments
which are marketed for use in the sports medicine/arthroscopy segment of the
orthopaedic market. The Company's suture fastener, a bone anchor with an
attached suture, is deployed into bone and used to secure soft tissue, such as
ligaments and tendons, to the bone. The Company has expanded its product
offering to include the ROC XS(TM) and Mini ROC(TM) suture fastener systems for
soft bone and small joint indications and the COR(TM) system for the repair of
osteochondral defects.
The Company competes in the soft tissue repair segment of the sports
medicine/arthroscopic surgery market. The Company markets its products and
related instruments principally to sports medicine surgeons and orthopaedic
specialists who treat and repair soft tissues, within and around joints, which
have been damaged by traumatic injury or degenerative disease.
The Company's products are based on unique and proprietary technologies which
afford them many advantages when compared to the most widely-used metal bone
anchors. The unique radial osteo compression method of attachment has allowed
the Company to develop a family of suture fasteners which are efficacious in a
broad variety of bone densities and sizes. The ROC design allows for placement
of suture fasteners in close proximity for precise positioning, which enhances
tissue to bone reattachment. ROC suture fasteners require as little as 6mm
(approximately 1/4 inch) of depth making them well-suited for small joint
tissue repair. ROC suture fasteners are not forced, hammered or screwed into the
bone and therefore are particularly suitable for placement in smaller, more
fragile bones. ROC suture fasteners are polymer-based and can be removed and
replaced with another ROC suture fastener in the event a revision or a second
surgery is required. Based on its existing designs, the Company is developing
and currently testing next generation suture fasteners using bioabsorbable
composites, which degrade and absorb into surrounding tissue, and collagen-based
biomaterial composites, which remodel into surrounding tissue. In addition, the
Company is pursuing opportunities to apply its core technologies outside of
orthopaedics in areas such as uro/gynecology, maxillo-facial trauma repair and
plastic surgery.
2
<PAGE>
Current Products and Applications
The Company currently markets a family of suture fastener products cleared by
the FDA for clinical applications for the shoulder, knee, wrist, hand and ankle.
In addition, the Company markets a family of arthroscopic instruments, including
the IDeal Suture Grasper and the IDeal Knot Pusher. All of the Company's current
products have received 510(k) clearance or have been exempted by the FDA from
the 510(k) clearance process. The following chart sets forth the product release
date, current applications and features and benefits of the Company's current
products:
<TABLE>
<CAPTION>
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
Initial Current
Product Release Date Applications Features and Benefits
------- ------------ ------------ ---------------------
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
<S> <C> <C> <C>
2.8mm ROC March 1995 shoulder, knee, foot * all polymer design
Suture Fastener and ankle * revisable
* available for open and arthroscopic repair
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
3.5mm ROC May 1994 shoulder, knee, foot * primary fastener for soft bone
Suture Fastener and ankle * revision fastener for 2.8mm ROC
* all polymer design
* revisable
* available for open and arthroscopic repair
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
1.9mm ROC April 1996 shoulder, hand and wrist * primary fastener for small bones
Suture Fastener * all polymer design
* revisable
* 5mm fastener length
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
2.3mm ROC May 1996 shoulder, hand and wrist * revision fastener for 1.9mm ROC
Suture Fastener * all polymer design
* revisable
* 5mm fastener length
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
3.5mm ROC XS May 1996 shoulder * primary fastner for soft bone
Suture Fastener * revision fastener for 3.5mm ROC
* all polymer design
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
IDeal Suture January 1995 open and arthroscopic * 15, 30, 45 and 60 degree angles
Grasper tissue suturing * arthroscopically sutures tissue
* without needle
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
IDeal Knot September 1994 open and arthroscopic knot * delivers all types of knots
Pusher tying * tip spreads to tighten knots
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
3.5mm ROC November 1996 bladder neck suspension * all polymer design
* revisable
* available for arthroscopic repair
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
3.5mm ROC XS February 1997 bladder neck suspension * all polymer design
* added holding strength in soft bone
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
6mm COR set September 1996 grafting of bone plugs in the * cutter allows for precise cutting of bone
* plugs
knee * bone plugs are cleanly transferred to
donor site
* no handling of plugs required
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
Soft Tissue Retractor December 1995 establishing surgical site * stainless steel design
for open surgical procedures * multiple size and location retractor arms
* clears surgical view
- ---------------------------- -------------------- ------------------------------- --------------------------------------------
</TABLE>
3
<PAGE>
The Company markets its fasteners and instruments as part of its complete IDeal
Arthroscopic Tissue Repair System, but each of the components may be purchased
separately. The Company also offers customized, reusable drill guides, drills,
ROC handles and awls as part of its standard instrument set used to deploy the
ROC family of suture fasteners. The Company markets this instrument set in a
standard tray which is universal to all the ROC suture fasteners. The universal
tray allows the hospital to standardize its soft tissue fixation using a single
cost effective instrument set.
In October 1996, the Company launched the Innovasive COR System which
facilitates the open or arthroscopic repair of articular cartilage defects using
bone grafting techniques.
Product Development
The Company has a variety of new products in various stages of development
designed to address a number of clinical needs. The Company does not currently
have FDA clearance to market any of these products, other than the bladder neck
suspension products described below. See "- Non-Arthroscopy/Sports Medicine
Applications."
Next Generation Suture Fasteners
Bioabsorbable ROC Suture Fasteners. The Company has been developing
bioabsorbable suture fasteners employing the ROC technology. Suitable
bioabsorbable materials have been identified, fasteners have been manufactured
and pre-clinical testing is under way. The goal is to develop a suture fastener
with mechanical properties similar to the ROC fastener in a format that will
degrade and absorb into surrounding tissue after the damaged tissue has securely
reattached to the bone.
Collagen Biomaterial Tissue Repair System. The Company has a collaborative
agreement with Collagen Corporation to develop tissue repair systems using the
biomaterial collagen. Products are being designed to degrade into by-products
which will be reincorporated, or remodeled, into surrounding tissues, such as
cartilage or bone. The initial project, a collagen suture fastener, is in
pre-clinical testing.
Meniscal and Cartilage Repair
The meniscus is a pad of spongy cartilage tissue which acts as a shock absorber
between the two major bones which form the knee. The surfaces of the knee bones
are covered by articular cartilage that also cushion the joint. Tears of the
meniscus and damage to the articular cartilage are two common orthopaedic
injuries. Conventional techniques for meniscal and cartilage repair may be
rather tedious, time-consuming and accompanied by risks of complications.
Meniscal Repair. Tears of the meniscus are currently treated primarily by
arthroscopic menisectomy, the removal of torn tissue. Partial menisectomies can
be performed in a matter of minutes with limited risks of complications and
often result in short-term functional improvements of the knee due to the
removal of attached and detached tissue fragments. However, menisectomies may
lead to greater knee instability and accelerate the onset of degenerative knee
disease. An alternative treatment for tears of the meniscus is meniscal suture
repair, which involves the repeated passing of long needles and suture through
the tight confines of the knee joint to reapproximate the torn tissue.
The Company intends to expand its product offering to knee applications with the
development of an arthroscopic system designed to repair the torn meniscus. This
product is currently in pre-clinical testing and is designed to replace current
suturing techniques.
4
<PAGE>
Non-Arthroscopy/Sports Medicine Applications
The Company believes that a significant market opportunity is available for its
existing products and core proprietary technologies outside of the
arthroscopy/sports medicine market. The Company has received FDA clearance to
market its ROC XS suture fastener for the uro/gynecological application set
forth below and will seek FDA clearance for its devices for the other
non-arthroscopy/sports medicine applications. No assurance can be given as to
when or whether the Company will receive such clearances.
Uro/Gynecology. Female urinary incontinence can result when the bladder sags
from its original position and alters the architecture of the urinary retention
structures within the urinary tract. Pain and reproductive problems can occur
when the uterus sags from its normal position and impinges upon adjacent tissue
structures. The Company believes that its suture fasteners can be delivered in
an open or minimally invasive laparascopic approach to attach and elevate the
sagging bladder neck or uterus to the pubic bone. The Company intends to seek a
marketing partner to distribute the bladder neck suspension products, allowing
the Company to concentrate on its core market.
Reconstructive and Endoscopic Plastic Surgery. Reconstructive plastic surgery
typically requires the reattachment of bone and tissue to surrounding bone.
Occasionally, tissue must be removed and replaced for aesthetic considerations.
The Company believes its proprietary fixation technology can be developed to
provide a means to reattach bone and tissue structures using conventional or
biomaterial fracture fixation plates. The Company also believes that suture
fasteners using its proprietary ROC technology in a minimally invasive
endoscopic procedure can be developed to attach sagging tissue which cause
facial wrinkles. If products are developed for endoscopic plastic surgery using
Collagen Corporation's proprietary technology, Collagen Corporation would have
the right to distribute such products under its distribution agreement with the
Company. See "Business-Relationship with Collagen Corporation."
Research and Development
The Company's objective is to continue to develop innovative products for the
sports medicine/arthroscopy market and to maximize the potential of its core
proprietary technology in nonorthopaedic markets. The Company's research and
development department currently consists of six engineers with substantial
design experience in the field of arthroscopy. During the fiscal year ended
December 31, 1996 and 1995, the Company incurred expenses of $2.7 million and
$1.6 million, respectively, in connection with its research and development
efforts.
The Company's research and development department is continually engaged in
assessing new tissue repair device technologies and techniques which are
applicable to the Company's business strategy. The research and development
engineers spend a significant amount of time with surgeon advisors and members
of the Company's Medical Advisory Board in evaluating new product ideas. The
Company has collaborative arrangements with university-based research centers
for pre-clinical design testing. In the future, the Company's research and
development efforts may include the identification of new technologies developed
by others and the acquisition or licensing of new technologies and product lines
and extensions.
5
<PAGE>
Sales and Marketing
The Company's sales and marketing strategy is to focus its efforts on
arthroscopic/sports medicine surgeons through a combination of direct sales
calls, clinical workshops and presentations at medical arthroscopic surgeons and
sports medicine specialists. The Company's clinical sales agents and marketing
personnel meet with surgeons to conduct product demonstrations, attend surgical
procedures and provide training. Sales and marketing personnel also attend
numerous domestic and foreign medical conventions each year where they exhibit
and demonstrate the Company's products.
The Company markets its products to surgeons in the United States through a
network of ten clinical employee sales representatives, 55 independent sales
agents and three regional sales managers. In addition to its field sales force,
as of March 3, 1997 the Company employed a staff of eleven corporate marketing,
sales and customer service support staff employees. This staff manages clinical
training workshops, sales management, print and video promotion, sales data
analysis, convention management and international marketing. The Company ships
to and invoices its hospital customers directly.
The Company markets its products internationally through established
distributors of orthopaedic medical devices. The Company's products are sold
directly to stocking distributors who sell the products to hospitals and
clinics. For the year ended December 31, 1996, international sales accounted for
26.8% of net sales.
The Company also works with a Clinical Advisory Group (the "CAG") of twenty
surgeons located across the United States. The members of the CAG are opinion
leaders in the field of arthroscopy and sports medicine and are affiliated with
professional athletic teams, collegiate athletic departments and major
orthopaedic hospitals. The Company relies on the CAG to conduct workshops at
which new surgeons train on the use of the Company's products, evaluate products
clinically prior to their general market release, present the Company's products
at conferences, assist in creating training videos and advise the Company on new
surgical and product techniques.
Manufacturing and Quality Control
The manufacture of the Company's devices and instrument consists of inspection,
assembly, testing and packaging of components that have been molded, machined or
manufactured to the Company's specifications by outside contractors. The Company
maintains a high level of quality control and inspects each lot of components to
ensure that they comply with the Company's exacting specifications. The Company
abides by the FDA's Good Manufacturing Practices and the requirements of foreign
regulatory agencies. Samples of sterilized products are sent to a certified
laboratory to validate that sterilization procedures have been adequately
performed. After this validation, the products are shipped to customers.
Most purchased components are available from more than one vendor. For certain
of these components, there are relatively few alternative sources of supply and
establishment of additional or replacement suppliers for such components cannot
be accomplished quickly. Many components are injection molded using Company
owned molds. Many polymer components have only one mold and replacement of the
molds can take 12 to 16 weeks. Any bioabsorbable materials used in future
products will likely be available from a single source. Any supply interruption
from single source vendors could have a material adverse effect on the Company's
ability to supply products.
6
<PAGE>
There is risk that certain suppliers may terminate sales of certain materials to
companies that manufacture medical devices in an attempt to limit their
potential product liability exposure. If the polymers which are used to
manufacture the Company's ROC suture fasteners become unavailable, the Company
would be required to identify a new polymer material for the suture fasteners
and certify the quality and suitability of the new material. In addition, a new
510(k) clearance would have to be obtained to market products manufactured from
the new materials. This process could take a substantial period of time and
there is no assurance that the Company would be able to identify, certify or
obtain clearance for the new polymer based fasteners.
Relationship with Collagen Corporation
The Company is a party to a Research and Development Agreement, a Manufacturing
and Supply Agreement and a Distribution Agreement with Collagen Corporation, a
leading developer of implantable bovine collagen. Pursuant to these agreements,
the Company and Collagen Corporation have crosslicensed their respective
technologies relating to collagen materials and medical devices. Collagen
Corporation holds approximately 11.6% of the Company's Common Stock. Pursuant to
an agreement among the Company and certain of its stockholders, Collagen
Corporation has the right to designate one member of the Company's Board of
Directors so long as it holds at least five percent of the Company's outstanding
Common Stock on a fully-diluted basis. Howard D. Palefsky, Chairman of the Board
of Collagen Corporation, currently serves as Collagen Corporation's designee on
the Company's Board of Directors.
Under the Research and Development Agreement, the Company and Collagen
Corporation have agreed to undertake the joint development of suture fasteners
made from collagen-based materials, to be funded by the Company up to certain
amounts as specified in an agreed project plan. The Research and Development
Agreement contemplates subsequent development of collagen-based tissue fixation
devices if the parties can agree on a project plan and budget for their
development. Any technology jointly developed pursuant to a project plan is to
be owned jointly by the parties. Until October 17, 2000, the parties have agreed
to work exclusively together with respect to the development of products covered
by the agreement. With respect to products for which a project plan has been
approved by the parties prior to October 17, 2000 and for which there is funding
through completion of development, Collagen Corporation and the Company have
agreed not to commence the development of competing products until after the
second anniversary of the first commercial sale of such products.
The Manufacturing and Supply Agreement provides that Collagen Corporation will
be the exclusive supplier to the Company for products manufactured from collagen
and developed under the Research and Development Agreement. If Collagen
Corporation is unable to supply such products, the Company is entitled to
develop a second source of supply. The Manufacturing and Supply Agreement
remains in effect with respect to a product until either the Distribution
Agreement between Collagen Corporation and the Company relating to such product
terminates or expires or until the Manufacturing Agreement is terminated by
reason of default or as the result of the bankruptcy or insolvency of a
contracting party.
The Distribution Agreement provides that Collagen Corporation will have
exclusive distribution rights to the Company's 3.5mm, 2.8mm and 1.9mm ROC suture
fasteners and collagen-based products developed under the Research and
Development Agreement which are labeled for facial plastic surgery or
dermatology applications. Under the agreement, the Company will have exclusive
distribution rights to collagen-based products developed under the Research and
Development Agreement which are labeled for orthopaedic applications. Each party
must sell a minimum number of
7
<PAGE>
units of products in its exclusive field to maintain exclusivity; otherwise, the
other party gains co-exclusive rights to market and distribute products in that
field. Under the agreement, a distributing party will purchase products from a
manufacturing party at various discounts from the actual average selling price
of the products, and Collagen Corporation is required to pay royalties to the
Company with respect to Collagen Corporation's net sales or products for which
development was funded by the Company pursuant to the Research and Development
Agreement.
Patents and Proprietary Technology
The Company believes that a key element of its competitive advantage depends on
its ability to develop and maintain proprietary aspects of its technology. To
this end, the Company files patent applications to protect technology,
inventions and improvements that it believes are significant to the growth of
its business. As of March 21, 1997 the Company had 8 issued patents and more
than 50 U.S. and foreign patent applications pending. These issued patents and
pending patent applications cover its radial osteo compression (ROC) technology,
surgical tools and methods, its COR cartilage repair technology, and various
surgical tools, systems and methods. In 1996, the Company received a notice
alleging that instruments based on one of its patents may infringe the patent of
a third party. The only products currently manufactured by the Company using the
Company's patent are its knot pusher and laparascopic scissors. Based on advice
of its patent counsel, the Company does not believe that its knot pusher or
laparascopic scissors infringe the cited third party patent and intends to
defend vigorously its position. The Company has not received any further notices
relating to this claim after the Company's initial response. However, should one
arise, the Company may not be able to successfully defend against an
infringement claim and there can be no assurance that the Company will not
become subject to other patent infringement claims or litigation or interference
proceedings. Moreover, there can be no assurance that current and potential
competitors and other third parties have not filed or in the future will not
file applications for, or have not received or in the future will not receive,
patents and will not obtain additional proprietary rights relating to materials
or processes used or proposed to be used by the Company. Accordingly, there can
be no assurance that the Company's products have not, do not or will not
infringe any patents or other proprietary rights of third parties.
The Company typically requires its employees, consultants and advisors to
execute appropriate confidentiality agreements in connection with their
employment, consulting or advisory relationships with the Company. The Company
also typically requires its employees, consultants and certain advisors to agree
to disclose and assign to the Company all inventions conceived of on Company
time, using Company property or which relate to the Company's business. There
can be no assurance, however, that the foregoing agreements will effectively
prevent disclosure of the Company's confidential information or provide
meaningful protection for the Company's confidential information if there is
unauthorized use or disclosure. Furthermore, no assurance can be given that
competitors will not independently develop substantially equivalent proprietary
information and techniques or otherwise gain access to the Company's proprietary
technology.
Competition
The Company faces strong competition in the marketplace from metal bone anchors
sold by large corporations with orthopaedic divisions. Mitek Surgical Products,
Inc. ("Mitek"), a division of Johnson & Johnson, the Zimmer and Linvatec
divisions of Bristol-Meyers Squibb Company, Dyonics, Inc. ("Dyonics"), a
subsidiary of Smith & Nephew, Inc., and Arthrotek Inc., a division of Biomet,
Inc., all compete in the Company's market with metal suture anchors. Dyonics
currently sells an all plastic design as well as a bioabsorbable suture
fastener. These competitors have significantly greater financial, manufacturing,
marketing, distribution and technical resources than the Company. Mitek, which
sells a metal barbed anchor, currently has the largest share of the suture
fastener market. In
8
<PAGE>
addition, Mitek recently introduced a bioabsorbable anchor. The Company also
faces competition from smaller companies developing new metallic anchor systems,
including Arthrex Inc., Li Medical, Inc. and Orthopaedic Biosystems Ltd., Inc.
The Company believes that its products compete favorably against its
competitions based on a number of factors, including the Company's proprietary
radial osteo compression design which permits adequate holding strength in both
large and small bones and can be modeled from plastic, bioabsorbable polymers
and biomaterial; the revisability of the Company's fasteners; the availability
of a proprietary arthroscopic delivery system for its products; and the small
profile of the Company's products when inserted into bone, which permits its
fasteners to be deployed in the small bones of the wrist, hand, ankle and foot.
However, there can be no assurance that the Company's competitors will not
succeed in developing products and technologies that are more effective or less
costly than those that have been or may be developed by the Company.
Government Regulation
Clinical testing, manufacture and sale of the Company's products, including the
ROC suture fasteners, the IDeal suture graspers and IDeal knot pusher are
subject to regulation by the FDA and corresponding state and foreign regulatory
agencies. Pursuant to the Federal Food, Drug, and Cosmetic Act, and the
regulations promulgated thereunder, the FDA regulates the clinical testing,
manufacture, labeling, distribution and promotion of medical devices.
Noncompliance with applicable requirements can result in, among other things,
fines, injunctions, civil penalties, recall or seizure of products, total or
partial suspension of production, failure of the government to grant pre-market
clearance or pre-market approval for devices, withdrawal of marketing approvals
and criminal prosecution. The FDA also has the authority to request repair,
replacement of refund of the cost of any device manufactured or distributed by
the Company.
In the United States, medical devices are classified into one of three classes
(i.e., Class I, II, or III) on the basis of the controls deemed necessary by the
FDA to reasonably ensure their safety and effectiveness. Class I devices are
subject to general and special controls (e.g., performance standards, postmarket
surveillance, patient registries and FDA guidelines). Generally, Class III
devices are those which must receive premarket approval by the FDA to ensure
their safety and effectiveness (e.,g., life-sustaining, life-supporting and
implantable devices, or new devices which have been found not to be
substantially equivalent to legally marketed devices).
Before a new device can be introduced in the market, the Company must generally
obtain FDA clearance through a 510(k) notification or approval of a Premarket
Approval (a "PMA"). A 510(k) clearance will be granted if the submitted
information establishes that the proposed device is "substantially equivalent"
to a legally marketed Class I or Class II medical device or a Class III medical
device for which the FDA has not called for PMAs. The FDA recently has been
requiring more rigorous demonstration of substantial equivalence than in the
past, including in some cases requiring submission of clinical trial data. The
FDA may determine that the proposed device is not substantially equivalent to a
predicate device or that additional information is needed before a substantial
equivalence determination can be made. It generally takes from four to 12 months
from submission to obtain 510(k) premarket clearance, but the process may take
longer. The FDA may determine that a proposed device is not substantially
equivalent to a legally marketed device or that additional information is needed
before a substantial equivalence determination can be made. A "not substantially
equivalent" determination or a request for additional information could prevent
or delay the market introduction of new products that fall into this category
and could have a material adverse effect on the Company's business, financial
condition or results of operations. For any of the Company's devices that are
cleared through the 510(k) process, modifications or enhancements that could
significantly affect the safety or effectiveness of the device or that
constitute a major change to
9
<PAGE>
the intended use of the device will require a new 510(k) submission.
A PMA application must be filed if a proposed device is not substantially
equivalent to a legally marketed Class I or Class II device, or if it is a Class
III device for which the FDA has called for PMAs. A PMA application must be
supported by valid scientific evidence which typically includes extensive
information (including relevant bench tests, laboratory and animal studies and
clinical trial data) to demonstrate the safety and effectiveness of the device.
The PMA application also must contain a complete description of the device and
its components; a detailed description of the methods, facilities and controls
used to manufacture the device; and the proposed labeling, advertising
literature and training materials (if any). The PMA process can be expensive,
uncertain and lengthy. A number of devices for which FDA approval has been
sought by other companies have never been approved for marketing. Modifications
to a device that is the subject of an approved PMA, its labeling, or
manufacturing process may require approval by the FDA or PMA supplements or new
PMAs.
If human clinical trials of a device are required and the device presents a
"significant risk," the sponsor of the trial (usually the manufacturer or the
distributor of the device) will have to file an IDE application prior to
commencing human clinical trials. The IDE application must be supported by data,
typically including the results of animal and laboratory testing. If the IDE
application is approved by the FDA and one or more appropriate Institutional
Review Boards ("IRBs"), human clinical trials may begin at a specific number of
investigational sites with a specific number of patients, as approved by the
FDA. If the device presents a "nonsignificant risk" to the patient, a sponsor
may begin the clinical trial after obtaining approval for the study by one or
more appropriate IRBs without the need for FDA approval. Sponsors of clinical
trials are permitted to sell investigational devices distributed in the course
of the study provided that compensation does not exceed recovery of the costs of
manufacture, research, development and handling. An IDE supplement must be
submitted to and approved by the FDA before a sponsor or investigator may make a
change to the investigational plan that may affect its scientific soundness or
the rights, safety or welfare of human subjects.
To date, all of the Company's products have received 510(k) clearance or have
been exempted by the FDA from the 510(k) clearance process. The Company has made
modifications to its devices which the Company believes do not require the
submission of new 510(k) notices. There can be no assurance, however, that the
FDA would agree with any of the Company's determinations not to submit a new
510(k) notice for any device modification, or would not require the Company to
submit a new 510(k) notice for any of the changes made to the device. If the FDA
requires the Company to submit a new 510(k) notice for any device modification,
the Company may be prohibited form marketing the modified device until the
510(k) notice is cleared by the FDA. There can be no assurance that any proposed
modification will be cleared on a timely basis, if at all.
The Company anticipates that its bioabsorbable suture fasteners under
development will be considered a Class II device subject to the 510(k) clearance
process. Based on discussions and a written response from the FDA, the Company
believes the FDA has determined that clinical data will not be required for
bioabsorbable fasteners provided the material selected for the device is well
characterized and known to the FDA. This includes the PLA material currently
selected for the bioabsorbable fastener. To comply with the 510(k) clearance
process and avoid clinical evaluation, additional testing including in-vitro and
in-vivo analysis will be required. To the Company's knowledge, collagen-based
medical devices currently being marketed have required PMA approval. The Company
anticipates that the FDA will require clinical trial data for its biomaterial
suture fastener, regardless of which regulatory path the FDA ultimately
requires. There can be no assurance the FDA will not determine that the
Company's future products, including the bioabsorbable and biomaterial suture
fasteners now in development, must adhere to the more costly, lengthy, and
uncertain PMA approval process. There also can be no assurance that the Company
will obtain FDA clearance or approval for such future products on a timely
basis, if at all, or that the FDA will not impose limitations
10
<PAGE>
on the intended use of such products as a condition of clearance or approval.
Any delay in receipt of, failure to obtain, or limitations on clearance or
approval could have a material adverse effect on the Company's business,
financial condition or results of operation.
Any devices manufactured or distributed by the Company pursuant to FDA
clearances or approvals are subject to pervasive and continuing regulation by
the FDA and certain state agencies. Manufacturers of medical devices for
marketing in the United States are required to adhere to applicable regulations
setting forth detailed Good Manufacturing Practices ("GMP") requirements, which
include testing, control and documentation requirements. Manufacturers must also
comply with Medical Devices Reporting ("MDR") requirements that a firm report to
the FDA any incident in which its product may have caused or contributed to a
death or serious injury, or in which its product malfunctioned and, if the
malfunction ware to recur, it would be likely to cause or contribute to a death
or serious injury. Labeling and promotional activities are subject to scrutiny
by the FDA and, in certain circumstances, by the Federal Trade Commission.
Current FDA enforcement policy prohibits the marketing of approved medical
devices for unapproved uses.
The Company is subject to routine inspection by the FDA and certain state
agencies for compliance with GMP requirements, MDR requirements, and other
applicable regulations. In October 1996, the FDA authorized changes to the GMP
regulations which will likely increase the cost of compliance with GMP
requirements. Changes in existing requirements or adoption of new requirements
could have a material adverse effect on the Company's business, financial
condition or results of operation.
The Company is also subject to regulation in each of the foreign countries in
which it sells its products in the areas of product standards, packaging
requirements, labeling requirements, import restrictions, tariff regulations,
duties and tax requirements. Many of the regulations applicable to the Company's
products in these countries are similar to those of the FDA. The national health
organization of some countries require the Company's products to be qualified
before they can be marketed in those countries. The Company relies on its
international distributors to comply with these requirements. To date, the
Company has not experienced significant difficulty in complying with these
regulations.
The Company is in the process of implementing policies and procedures which are
intended to allow the Company to receive ISO 9001 certification. ISO 9001
standards for quality systems in manufacturing have been developed to ensure
that companies know, on a worldwide basis, the standards of quality to which
they will be held. The European Union has promulgated rules which require that
medical products receive the CE mark by mid-1998. The CE mark is an intentional
symbol of quality and compliance with applicable European medical device
directives. Failure to receive CE mark certification will prohibit the Company
from selling its products in Europe. There can be no assurance that the Company
will be successful in meeting the certification requirements. ISO 9001
certification is one of the CE mark certification requirements.
The Company is subject to numerous federal, state and local laws relating to
such matters as safe working conditions and environmental protection. There can
be no assurance that the Company will not be required to incur significant costs
to comply with such laws and regulations in the future or that such laws or
regulations will not have a material adverse effect upon the Company's business,
financial condition or results of operations.
11
<PAGE>
Product Liability and Insurance
Medical device companies are subject to an inherent risk of product liability
and other liability claims in the event that the use of their products results
in personal injury. The Company maintains liability insurance coverage in the
amounts deemed appropriate by management based upon the nature and risks of its
business in general and its actual experience to date. There can be no assurance
that a future claim will not exceed insurance coverage or that such coverage
will continue to be available. In addition, any substantial increase in the cost
of such insurance could have a material adverse effect on the Company's
business, financial condition and results of operations.
Employees
As of March 3, 1997, the Company employed 62 individuals, 12 of whom were
engaged in research and development and regulatory, 17 in manufacturing and
quality assurance and 33 in marketing, sales and administrative positions. The
Company also contracts with outside consultants. None of the Company's employees
is covered by a collective bargaining agreement. The Company believes that it
maintains good relations with its employees.
Item 2. Properties
The Company's facility is located in Marlborough, Massachusetts and contains
approximately 28,000 square feet, which is divided equally between offices,
manufacturing and expansion space. The facility is leased through May 2002. The
Company has options to renew the lease for a total of six additional years and
has a right of first offer on additional space in the building.
Item 3. Legal Proceedings
The Company is not a party to any material legal proceedings.
Item 4. Submission of Matters to a Vote of Security Holders
None.
12
<PAGE>
Part II
Item 5. Market for Registrant's Common Equity and Related Stockholder Matters
The Company's common stock is traded in the over-the-counter market on The
Nasdaq National Market under the symbol IDEA. The table below lists the
quarterly range of the high and low per share closing bids of the Company's
Common Stock on the Nasdaq National Market during the periods indicated.
FISCAL PERIOD HIGH LOW
- ------------- ------- ---
Third Quarter - 1996 (1) $12 1/2 $8
Fourth Quarter - 1996 9 1/2 6 7/8
(1) The Company's Common Stock began trading on the Nasdaq National Market on
June 6, 1996, the date of the commencement of the Company's initial public
offering.
The Company has never declared or paid any cash dividends on its Common Stock.
The Company currently intends to retain all earnings for the operation and
expansion of its business and therefore does not anticipate paying any cash
dividends in the foreseeable future.
On March 20, 1996 there were 97 stockholders of record of the Company's common
stock.
13
<PAGE>
Item 6. Selected Financial Data
<TABLE>
<CAPTION>
Years Ended December 31,
--------------------------------------------------------------------------------------------
1996 1995 1994 1993 1992
---- ---- ---- ---- ----
(in thousands, except per share data)
<S> <C> <C> <C> <C> <C>
Statement of Operations Data:
Net sales (1) $ 4,353 $ 1,234 $ 244 $ 126 $ 344
Cost of sales 1,611 1,000 465 263 -
-------- -------- -------- -------- --------
Gross profit (loss) 2,742 234 (221) (137) 344
Selling, general and administrative
expenses 4,922 2,435 1,533 914 580
Research and development
expenses (2) 2,667 1,597 1,172 922 2,589
-------- -------- -------- -------- --------
Loss from operations (4,847) (3,798) (2,926) (1,973) (2,825)
Interest income (expense), net 785 64 34 (238) 1
-------- -------- -------- -------- --------
Net loss $ (4,062) $ (3,734) $ (2,892) $ (2,211) $ (2,824)
========= ======== ======== ======== ========
Pro forma net loss per share (3) $ (0.63) $ (0.76)
========= ========
Shares used in computing pro forma
net loss per share 6,465 4,939
========= ========
<CAPTION>
December 31,
--------------------------------------------------------------------------------------------
1996 1995 1994 1993 1992
---- ---- ---- ---- ----
(in thousands)
<S> <C> <C> <C> <C> <C>
Balance Sheet Data:
Cash and cash equivalents $ 12,825 $ 5,052 $ 2,051 $ 294 $ 408
Working capital 22,841 4,857 1,628 (3,835) (409)
Total assets 25,363 6,399 3,099 869 639
Long-term note payable, less
current portion - - - - 906
Mandatorily redeemable convertible
preferred stock - 13,970 6,993 - -
Stockholders' equity (deficit) $ 23,788 $ (8,501) $ (4,759) $ (3,426) $ (1,189)
</TABLE>
(1) Sales amount for the year ended December 31, 1992 represents amounts
received pursuant to a collaborative research and development
arrangement.
(2) Includes research and development costs payable to a related party of
$664 in 1996 and $265 in 1995, and a charge of $1,700 in connection
with a termination of a development agreement in 1992.
(3) See Note 1 of Notes to Financial Statements.
14
<PAGE>
Item 7. Management's Discussion and Analysis of Financial Condition and
Results of Operation
MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL
CONDITION AND RESULTS OF OPERATIONS
Overview
Since its inception, Innovasive Devices has been primarily engaged in the
development, manufacture and marketing of proprietary devices and
instrumentation which facilitate the reattachment of soft tissue structures,
such as ligaments and tendons, to bones and other tissues. The Company has a
limited operating history and has expended significant resources to fund
research and development, the establishment of its manufacturing capabilities
and the expansion of its marketing and sales efforts. The Company's sales have
been principally derived from the sale of its family of ROC tissue fasteners and
related surgical instrumentation. The Company commenced commercial shipments of
its first ROC fastener during 1994 and has since expanded its product offering
to include the Ideal Arthroscopic Suture Fastener System, the ROC XS and Mini
ROC suture fasteners and the Innovasive COR system for the repair of
osteochondral defects.
Forward-looking statements in this report are made pursuant to the "Safe Harbor"
provisions of the Private Securities Litigation Reform Act of 1995. Any
forward-looking statements regarding the Company's revenues, earnings, future
plans and objectives are subject to risk and uncertainties that could cause the
actual results to vary materially. These risks include the receipt of regulatory
approvals, progress of product development programs, clinical efficacy of and
market demand for products, as well as those factors set forth in Exhibit 99 of
this Annual Report.
Results of Operations
Years Ended December 31, 1996 and 1995
Net sales increased to $4.4 million for the year ended December 31, 1996 from
$1.2 million for the year ended December 31, 1995. Sales of ROC suture fasteners
and related surgical instruments increased to $4.1 million for the year ended
December 31, 1996 from $1.1 million for the year ended December 31, 1995. The
introduction of additional ROC suture fasteners and the expansion of the direct
sales force contributed to the increase in domestic sales, which increased to
$3.2 million from $1.0 million in the prior year. In the second quarter of 1996,
the Company introduced the ROC XS and Mini-ROC suture fasteners, extending its
ROC suture fastener product line. In the fourth quarter of 1996, the Company
introduced the COR system, an articular cartilage repair system, which
represents an expansion of its product offerings from shoulder and small joint
applications to a third clinical area, the knee. International sales, which are
denominated in US dollars, increased to $1.2 million from $188,000 in the prior
year primarily due to the expansion of the product offering and the addition of
international distributors. The $1.2 million of international sales for the year
ended December 31, 1996 were derived from Japan (48.4%), Europe (36.4%) Africa
(10.2%) and other countries (5.0%). The $188,000 of international sales for the
year ended December 31, 1995 were derived from Europe (88.0%) and Africa
(12.0%).
15
<PAGE>
Gross profit increased to $2.7 million for the year ended December 31, 1996 from
$234,000 for the year ended December 31, 1995. As a percentage of net sales,
gross profit increased to 63.0% for the year ended December 31, 1996 from 19.0%
for the year ended December 31, 1995. The increase in gross profit was primarily
the result of increased sales of ROC suture fasteners and improved manufacturing
efficiencies from increased production levels.
Selling, general and administrative expenses increased to $4.9 million for the
year ended December 31, 1996 from $2.4 million for the year ended December 31,
1995. The increase resulted primarily from the expansion of the domestic direct
sales force, increased salary and travel costs, higher aggregate selling
commissions resulting from higher sales volume, increased sample expenses and
the increased costs associated with operating as a public company.
Research and development expenses increased to $2.7 million for the year ended
December 31, 1996 from $1.6 million for the year ended December 31, 1995. The
increase was primarily attributable to the collaborative development effort with
Collagen Corporation, product development costs associated with the meniscal
repair and bioabsorbable programs, patent preparation and filing costs, and
salary related expenses.
Net interest income increased to $785,000 for the year ended December 31, 1996
from $64,000 for the year ended December 31, 1995. The primary reason for the
increase was due to the interest received on the investment of the proceeds of
the initial public offering closed during the second quarter of 1996.
As a result of the foregoing, the net loss increased to $4.1 million for the
year ended December 31, 1996 from $3.7 million for the year ended December 31,
1995.
Years Ended December 31, 1995 and 1994
Net sales increased to $1.2 million for the year ended December 31, 1995 from
$244,000 for the year ended December 31, 1994. Sales of ROC suture fasteners and
related surgical instruments increased to $1.1 million for the year ended
December 31, 1995 from $163,000 for the year ended December 31, 1994. Sales of
these products represented 92.7% and 66.7% of net sales in 1995 and 1994,
respectively. The remaining sales for each year were derived from the sales of
laparoscopic scissors to a marketing partner.
Gross profit increased to $234,000 for the year ended December 31, 1995 from a
loss of $221,000 for the year ended December 31, 1994. As a percentage of net
sales, gross profit was 19.0% and (90.6)% in 1995 and 1994, respectively. The
improvement in gross profit was primarily due to the higher sales volume of the
ROC suture fasteners and related instruments.
Selling, general and administrative expenses increased to $2.4 million for the
year ended December 31, 1995 from $1.5 million for the year ended December 31,
1994. This increase was primarily attributable to the establishment of a direct
sales force in the United States and increased sales commissions on the higher
sales volume.
Research and development expenses increased to $1.6 million for the year ended
December 31, 1995 from $1.2 million for the year ended December 31, 1994. This
increase was primarily a result of the Company's collaborative development
effort with Collagen Corporation and an increase in personnel related expenses.
16
<PAGE>
Net interest income increased to $64,000 for the year ended December 31, 1995
from $34,000 for the year ended December 31, 1994. Interest income decreased to
$84,000 for the year ended December 31, 1995 from $125,000 for the year ended
December 31, 1994 due to lower average cash balances. However, lower interest
income was offset by a reduction in interest expense to $20,000 for the year
ended December 31, 1995 from $91,000 for the year ended December 31, 1994.
Interest expense related to notes payable which were converted into the
Company's Common Stock.
Net loss increased to $3.7 million for the year ended December 31, 1995 from
$2.9 million for the year ended December 31, 1994.
Liquidity and Capital Resources
As of December 31, 1996, the Company had cash, cash equivalents and marketable
securities of $22.7 million as compared to a balance of $5.1 million on December
31, 1995. The increase in the balance is primarily the result of the proceeds of
$21.5 million from the Company's initial public offering of 1,900,000 shares of
common stock completed in June 1996. Cash used in the Company's operations
increased to $4.2 million for the year ended December 31, 1996 from $3.3 million
for the year ended December 31, 1995. The increase in cash used in operations
was due primarily to the impact of increased sales offset by higher cash
requirements associated with building the direct sales force, expanding the new
product development effort, operating as a public company for a portion of 1996
and an increased investment in working capital to support the growth of the
business.
The Company's future liquidity and capital requirements will depend upon the
progress of the research and development programs, regulatory matters and the
expansion of its manufacturing capabilities to satisfy increasing volume
requirements. In addition, the Company's capital requirements will depend upon,
among other factors, the timing the of establishment of effective sales channels
in the United States and abroad and the extent to which the Company's products
gain market acceptance. Therefore the Company cannot provide assurances that it
will not require additional financing in the future. If additional financing is
necessary, the Company would seek to raise these funds through bank facilities
or debt or equity offerings. There can be no assurance that such funds would be
available on terms acceptable to the Company.
17
<PAGE>
Item 8. Financial Statements and Supplementary Data
INNOVASIVE DEVICES, INC.
INDEX TO FINANCIAL STATEMENTS
<TABLE>
<CAPTION>
Page
----
<S> <C>
Report of Independent Accountants 19
Balance Sheet at December 31, 1996 and 1995 20
Statement of Operations for the three years ended December 31, 1996 21
Statement of Stockholders' Equity (Deficit) for the three years ended 22
December 31, 1996
Statement of Cash Flows for the three years ended December 31, 1996 23
Notes to Financial Statements 24
Financial Statement Schedule:
II. Valuation and Qualifying Accounts and Reserves for the three 48
years ended December 31, 1996
</TABLE>
All other schedules are omitted because they are not applicable.
18
<PAGE>
REPORT OF INDEPENDENT ACCOUNTANTS
To the Board of Directors and
Stockholders of Innovasive Devices, Inc.
In our opinion, the financial statements listed in the accompanying index
present fairly, in all material respects, the financial position of
Innovasive Devices, Inc. at December 31, 1996 and 1995, and the results
of its operations and its cash flows for each of the three years in the
period ended December 31, 1996, in conformity with generally accepted
accounting principles. These financial statements are the responsibility
of the Company's management; our responsibility is to express an opinion
on these financial statements based on our audits. We conducted our
audits of these statements in accordance with generally accepted auditing
standards which require that we plan and perform the audit to obtain
reasonable assurance about whether the financial statements are free of
material misstatement. An audit includes examining, on a test basis,
evidence supporting the amounts and disclosures in the financial
statements, assessing the accounting principles used and significant
estimates made by management, and evaluating the overall financial
statement presentation. We believe that our audits provide a reasonable
basis for the opinion expressed above.
PRICE WATERHOUSE LLP
Boston, Massachusetts
February 19, 1997
19
<PAGE>
INNOVASIVE DEVICES, INC.
BALANCE SHEET
(In thousands, except share data)
<TABLE>
<CAPTION>
ASSETS December 31,
-----------------------------------------------
1996 1995
-------------------- --------------------
<S> <C> <C>
Current assets:
Cash and cash equivalents $ 12,825 $ 5,052
Marketable securities 9,861
Accounts receivable, net of allowance for 759 283
doubtful accounts of $89 and $50 at
December 31, 1996 and 1995, respectively
Inventories 859 405
Prepaid expenses 112 48
-------------------- -------------------
Total current assetts 24,416 5,788
Fixed assets, net 922 599
Other assets, net 25 12
-------------------- -------------------
$ 25,363 $ 6,399
==================== ===================
LIABILITIES, REDEEMABLE PREFERRED STOCK,
AND STOCKHOLDERS' EQUITY (DEFICIT)
Current liabilities:
Accounts payable $ 628 $ 459
Accounts payable to related party 170 265
Accrued expenses 387 140
Accrued payroll 390 66
-------------------- -------------------
Total current liabilities 1,575 930
-------------------- -------------------
Mandatorily redeemable convertible
preferred stock - 13,970
-------------------- -------------------
Stockholders' equity (deficit):
Preferred stock, $.01 par value; 1,000,000 shares
authorized; no shares issued and outstanding - -
Common stock, $.0001 par value;
shares authorized: 15,000,000;
shares issued: 7,260,408 at December 31, 1996,
1,815,922 at December 31, 1995;
shares outstanding: 7,260,408 at December 31, 1996,
1,811,478 at December 31, 1995 1 1
Additional paid-in capital 39,789 3,459
Accumulated deficit (16,002) (11,936)
-------------------- -------------------
23,788 (8,476)
Less - cost of 4,444 shares of common stock
held in treasury at December 31, 1995 - (25)
--------------------- -------------------
Total stockholders' equity (deficit) 23,788 (8,501)
Commitments (Note 12) - -
-------------------- -------------------
$ 25,363 $ 6,399
==================== ===================
</TABLE>
The accompanying notes are an integral part of the financial statements.
20
<PAGE>
INNOVASIVE DEVICES, INC.
STATEMENT OF OPERATIONS
(In thousands, except per share data)
<TABLE>
<CAPTION>
Year Ended December 31,
-------------------------------------------------------
1996 1995 1994
---- ---- ----
<S> <C> <C> <C>
Net sales $4,353 $1,234 $244
Cost of sales 1,611 1,000 465
----------- ---------- ----------
Gross profit (loss) 2,742 234 (221)
Selling, general and administrative
expenses 4,922 2,435 1,533
Research and development 2,003 1,332 1,172
Research and development - related party 664 265 -
----------- ---------- ----------
Loss from operations (4,847) (3,798) (2,926)
Interest income 785 84 125
Interest expense - (20) (91)
----------- ---------- ----------
Net loss $(4,062) $(3,734) $(2,892)
=========== ========== ==========
Unaudited pro forma net loss
per share (Note 1) $( 0.63) $( 0.76)
=========== ==========
Shares used in computing net loss
per share 6,465 4,939
=========== ==========
</TABLE>
The accompanying notes are an integral part of the financial statements.
21
<PAGE>
INNOVASIVE DEVICES, INC.
STATEMENT OF STOCKHOLDERS' EQUITY (DEFICIT)
(In thousands, except share data)
<TABLE>
<CAPTION>
Series A and
Series B
mandatorily
redeemable Stockholders' Equity (Deficit)
convertible ----------------------------------------------------------------------
preferred stock Common Stock
------------------- ---------------
Number Additional Total
Number of of Par paid-in Accumulated Treasury stockholder's
shares Amount shares value capital deficit stock equity (deficit)
----------- ------ ------ ----- ---------- ----------- -------- ----------------
<S> <C> <C> <C> <C> <C> <C> <C> <C>
Balance at
December 31, 1993 - $ - 1,120,890 $ 1 $ 1,895 $ (5,297) $ (25) $ (3,426)
Issuance of Series A
mandatorily redeemable
convertible preferred
stock, net of issuance
costs of $42
(Note 7) 3,656,364 5,991
Issuance of Series A
mandatorily redeemable
convertible preferred
stock upon conversion
of convertible notes
payable (Note 7) 603,973 997
Issuance of common stock
upon conversion of
convertible notes
payable (Note 7) 695,032 - 1,564 1,564
Accretion of Series A
mandatorily redeemable
convertible preferred
stock to redemption
value 5 (5) (5)
Net loss (2,892) (2,892)
--------- ------- ---------- ------ ---------- ------------ ----------- ------------------
Balance at
December 31, 1994 4,260,337 6,993 1,815,922 1 3,459 (8,194) (25) (4,759)
Issuance of Series B
mandatorily redeemable
convertible preferred
stock, net of issuance
costs of $31
(Note 7) 3,271,030 6,969
Accretion of Series A and
Series B mandatorily
redeemable convertible
preferred stock to
redemption value 8 (8) (8)
Net loss (3,734) (3,734)
----------- -------- --------- ------ ---------- ------------ ----------- ------------------
Balance at
December 31, 1995 7,531,367 13,970 1,815,922 1 3,459 (11,936) (25) (8,501)
Issuance of Series B
mandatorily redeemable
convertible preferred
stock, net of issuance
costs of $20 (Note 7) 442,235 927
Accretion of Series A
and Series B mandatorily
redeemable convertible
preferred stock to
redemption value 4 (4) (4)
Issuance of common stock
under stock option plan 5,111 - 9 9
Conversion of Series A
and Series B manditorily
convertible preferred
stock into common stock
(Note 7) (7,973,602) (14,901) 3,543,819 - 14,901 14,901
Issuance of common stock,
net of issuance costs
of $2,305 1,895,556 - 21,420 25 21,445
Net loss (4,062) (4,062)
----------- -------- --------- ------ ---------- ------------ ----------- ------------------
Balance at
December 31, 1996 - $ - 7,260,408 $ 1 $ 39,789 $ (16,002) $ - $ 23,788
=========== ======== ========= ====== ========== ============ =========== ==================
</TABLE>
The accompanying notes are an integral part of the financial statements
22
<PAGE>
INNOVASIVE DEVICES, INC.
STATEMENT OF CASH FLOWS
(In thousands, except share data)
<TABLE>
<CAPTION>
December 31,
--------------------------------------------------------------
1996 1995 1994
------------------ ------------------ -------------------
<S> <C> <C> <C>
Cash flows from operating activities
Net loss $ (4,062) $ (3,734) $ (2,892)
Adjustments to reconcile net loss to net cash
provided by (used for) operating activities:
Depreciation and amortization 273 202 137
Changes in assets and liabilities:
Accounts receivable (476) (213) (24)
Inventories (454) (67) (234)
Prepaid expenses (64) (14) (18)
Other assets (13) 1 (5)
Accounts payable 169 205 (72)
Accounts payable to related party (95) 265
Accrued expenses 247 30 51
Accrued payroll expense 324 30 15
------------------ ------------------ -------------------
Net cash used for operating activities (4,151) (3,295) (3,042)
Cash flows from investing activities
Purchases of fixed assets (596) (208) (329)
Purchases of marketable securities (9,861) - -
------------------ ------------------ -------------------
Net cash used for investing activities (10,457) (208) (329)
Cash flows from financing activities
Proceeds from issuance of preferred stock,
net of issuance costs 927 5,968 5,991
Proceeds from issuance of common stock,
net of issuance costs 21,454 - -
Principal payments on note payable - (464) (863)
Proceeds from issuance of convertible note payable - 1,000 -
------------------ ------------------ -------------------
Net cash provided by financing activities 22,381 6,504 5,128
------------------ ------------------ -------------------
Net increase in cash and cash equivalents 7,773 3,001 1,757
Cash and cash equivalents at beginning of period 5,052 2,051 294
------------------ ------------------ -------------------
Cash and cash equivalents at end of period $ 12,825 $ 5,052 $ 2,051
================== ================== ===================
Supplemental disclosure of cash flow information
Cash paid for interest $ - $ 44 $ 112
================== ================== ===================
</TABLE>
Supplemental disclosure of non-cash financing activities:
In connection with the issuance of Series A preferred stock in 1994, holders of
convertible notes payable totaling $2,454 plus accrued interest of $107 accepted
603,973 shares of Series A preferred stock and 695,032 shares of common stock as
consideration for full payment of these obligations.
In connection with the issuance of Series B preferred stock in 1995, holders of
convertible notes payable totaling $1,000 accepted 467,290 shares of Series
B preferred stock as consideration for full payment of these obligations.
The accompanying notes are an integral part of these
condensed financial statements.
23
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS
1. Nature of Business and Summary of Significant Accounting Policies
The Company is engaged in the research, development, manufacture and
distribution of medical devices focused on less invasive, arthroscopic
surgical repair, and restoration of traumatized or diseased tissue. The
Company's products are sold to customers in the healthcare industry
primarily in the U.S.
Revenue Recognition, Accounts Receivable and Concentration of Credit Risk
Revenue is recognized upon shipment of product. Ongoing credit evaluations
of customers' financial condition are performed and collateral is not
required. Concentration of credit risk with respect to accounts receivable
is limited due to the number of customers comprising the Company's customer
base. The Company maintains reserves for potential credit losses and such
losses, in the aggregate, have not exceeded management's expectations.
Cash, Cash Equivalents and Marketable Securities
The Company considers all highly liquid investments purchased with a
maturity of three months or less to be cash equivalents and those with
maturities greater than three months are considered to be marketable
securities. Marketable securities are stated at amortized cost plus accrued
interest, which approximates fair value. Cash equivalents and marketable
securities consist primarily of corporate debt securities, U.S. government
agency obligations and money market instruments.
The Company accounts for its investments in accordance with Statement of
Financial Accounting Standards (SFAS) No. 115, "Accounting for Certain
Investments in Debt and Equity Securities." Under the provision of SFAS No.
115, the Company has classified its investments as "available-for-sale" and
any associated unrealized gains or losses, if material, are recorded as a
separate component of equity until realized. At December 31, 1996 and 1995,
any unrealized gains or losses were immaterial.
Inventories
Inventories are stated at the lower of cost or market, with cost being
determined using the first-in, first-out method.
Fixed Assets
Fixed assets are recorded at cost and depreciated using the straight-line
method over their estimated useful lives. Repair and maintenance costs are
expensed as incurred.
Income Taxes
The Company accounts for income taxes in accordance with SFAS No. 109,
"Accounting for Income Taxes." SFAS 109 is an asset and liability approach
that requires the recognition of deferred tax assets and liabilities for the
expected future tax consequences of events that have been recognized in the
Company's financial statements or tax returns. Deferred tax expense
(benefit), represents the change in the net deferred tax asset or liability
balance. In estimating future tax consequences, SFAS 109 generally considers
all expected future events other than enactments of changes in the tax law
or rates.
24
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS - (Continued)
Unaudited Pro Forma Net Loss Per Share
Pro forma net loss per share is determined by dividing the net loss
attributable to common stockholders by the weighted average number of common
stock outstanding during the period, including the affect of the assumed
conversion of all convertible preferred stock upon issuance. Actual
conversion of the preferred stock occurred in June 1996 upon the closing of
the Company's initial public offering.
Pursuant to Securities and Exchange Commission Staff Accounting Bulletin 83,
common stock options and convertible preferred stock issued at prices below
the offering price per share during the twelve month period prior to the
initial filing of the Company's registration statement on Form S-1 have also
been included in the calculation using the treasury stock method and the
anticipated offering price of $12 per share of common stock, as if they were
outstanding from January 1, 1995 through March 31, 1996. For the periods
subsequent to March 31, 1996, common stock equivalents (stock options) have
been excluded as they are anti-dilutive.
Historical net loss per share for 1994 has not been presented as the
mandatorily redeemable Series A convertible preferred stock would have been
omitted from the weighted average shares outstanding as it is anti-dilutive
and was issued more than the twelve months prior to the initial filing of
the Company's registration statement on Form S-1.
Stock-Based Compensation
Stock-based compensation awards to employees under the Company's stock plans
are accounted for using the intrinsic value method prescribed in Accounting
Principles Board Opinion No. 25, "Accounting for Stock Issued to Employees"
and related Interpretations. On January 1, 1996, the Company adopted the
disclosure requirements of SFAS No. 123, "Accounting for Stock-Based
Compensation."
Use of Estimates
The preparation of financial statements in conformity with generally
accepted accounting principles requires management to make estimates and
assumptions that affect the reported amounts of assets and liabilities and
disclosure of contingencies at December 31, 1996 and 1995, and the reported
amounts of revenues and expenses during the three years in the period ended
December 31, 1996. Actual results could differ from those estimates.
Reclassifications
Certain reclassifications of prior year balances have been made to
conform to the current year presentation.
25
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS - (Continued)
2. Marketable Securities
The amortized cost of available-for-sale securities (including accrued
interest), which approximates fair value, consists of the following:
<TABLE>
<CAPTION>
December 31,
---------------------------------------------
(In thousands) 1996 1995
------------------- -------------------
<S> <C> <C>
Corporate debt securities $ 10,176 $ -
U.S. govern agency obligations 7,154 -
Money market instruments 2,817 5,045
------------------- -------------------
Total available for sale 20,147 5,045
------------------- -------------------
Less cash equivalents (10,286) (5,045)
------------------- -------------------
Total marketable securities $ 9,861 $ -
=================== ===================
</TABLE>
The amortized cost of the Company's investment in debt securities at
December 31, 1996 was comprised of $15.7 million due in one year or less and
$1.6 million due in one to two years. Due to the short-term nature of the
investments, expected maturities and contractual maturities are normally the
same.
The Company did not realize any gains or losses on available-for-sale
securities during the three years in the period ended December 31, 1996 as
the securities have been held to maturity.
3. Inventories
Inventories consist of the following:
<TABLE>
<CAPTION>
December 31,
---------------------------------------------
(In thousands) 1996 1995
-------------------- -------------------
<S> <C> <C>
Raw materials $ 282 $ 157
Work-in-process 117 68
Finished goods 460 180
-------------------- -------------------
$ 859 $ 405
==================== ===================
</TABLE>
Inventories are shown net of a reserve which has been established to provide
for estimated losses arising from inventory obsolescence. The Company
estimates its reserve requirement for obsolete inventory based upon such
factors as the aging of inventory, historical usage, projected sales and the
impact of new product introductions. Amounts charged to cost of sales
relating to the obsolescence reserve was approximately $293,000, $233,000
and $81,000 in 1996, 1995 and 1994, respectively.
4. Fixed Assets
Fixed assets consist of the following:
<TABLE>
<CAPTION>
December 31,
Useful life ---------------------------------------------
(In thousands) in years 31 1996 1995
----------- -------------------- ------------------
<S> <C> <C> <C>
Furniture and fixtures 3 - 7 $ 555 $ 255
Machinery and equipment 5 318 211
Leasehold improvements 3 53 74
Tooling 3 - 5 636 491
-------------------- ------------------
1,562 1,031
Less - Accumulated depreciation
and amortization 640 432
------------------- -------------------
$ 922 $ 599
=================== ===================
</TABLE>
26
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS - (Continued)
5. Borrowings
Note Payable
In connection with the termination of a development agreement in December
1992, the Company executed a note payable for $2 million, payable in semi-
annual payments of $488,000 beginning June 30, 1993. As no stated interest
rate existed on the note payable, interest was imputed at 10% per annum. The
Company recorded a charge of $1.7 million to research and development
expense in 1992, representing the present value of the total consideration
due. The Company made the final payment related to this liability in
February 1995.
6. Income Taxes
The provision (benefit) for income taxes was as follows:
<TABLE>
<CAPTION>
DECEMBER 31,
-------------------------------------
(In thousands) 1996 1995 1994
----------- ----------- -----------
<S> <C> <C> <C>
Deferred tax benefit
Federal $(1,337) $(1,204) $ (956)
State (383) (397) (300)
-------- -------- --------
Total deferred (1,720) (1,601) (1,256)
Tax asset valuation allowance 1,720 1,601 1,256
-------- -------- --------
$ -- $ -- $ --
======== ======== ========
</TABLE>
Deferred income taxes reflect the tax impact of temporary differences
between the amount of assets and liabilities for financial reporting
purposes and such amounts as measured by tax laws and regulations. Under
SFAS 109, the benefit associated with future deductible temporary
differences is recognized if it is more likely than not that a benefit will
be realized. Based on historical evidence of net losses, the Company has
recorded a valuation allowance that offsets all net deferred tax assets.
Principal components of the deferred tax assets and liabilities included on
the balance sheet at December 31, 1996 and 1995 were as follows:
<TABLE>
<CAPTION>
DECEMBER 31,
----------------------------
(In thousands) 1996 1995
------------- ------------
<S> <C> <C>
Deferred tax assets:
Net operating loss carryforwards $ 4,093 $ 2,499
Inventory 290 329
Research and development tax
credit 204 149
Fixed assets 79 32
Other items 110 47
------- -------
Gross deferred tax assets 4,776 3,056
Deferred tax asset valuation
allowance (4,776) (3,056)
------- -------
$ -- $ --
======= =======
</TABLE>
27
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS - (Continued)
A reconciliation between the amount of reported tax benefit and the amount
computed using the U.S. Federal Statutory rate of 35% for 1996, 1995 and
1994 follows:
<TABLE>
<CAPTION>
DECEMBER 31,
-------------------------------------
(In thousands) 1996 1995 1994
----------- ----------- -----------
<S> <C> <C> <C>
Tax at statutory rate $(1,422) $(1,307) $(1,012)
State tax, net of federal
benefit (196) (273) (206)
Research and development credit (107) (19) (65)
Other 5 (2) 27
-------- -------- --------
(1,720) (1,601) (1,256)
Increase in valuation allowance 1,720 1,601 1,256
-------- -------- --------
$ -- $ -- $ --
======== ======== ========
</TABLE>
The Company has U.S. Federal operating loss carryforwards of approximately
$10 million and tax credit carryforwards of approximately $136,000. The
operating loss and tax credit carryforwards expire in the years 2009 through
2011.
An ownership change, as defined by Section 382 of the Internal Revenue Code,
resulting from the Company's initial public offering in June 1996, will
limit the utilization of net operating loss and tax credit carryforwards to
approximately $3.9 million per year. Subsequent significant ownership
changes could, however, further limit the utilization of these
carryforwards in future years.
7. Mandatorily Redeemable Convertible Preferred Stock
Mandatorily redeemable convertible preferred stock consists of:
<TABLE>
<CAPTION>
(In thousands, except share and per share data) December 31,
---------------------
1996 1995
-------- --------
<S> <C> <C>
Redeemable preferred stock:
Series A mandatorily redeemable convertible
preferred stock, $1.65 per share liquidating
preference and redemption value; $.01 par
value; no shares authorized, issued or
outstanding at December 31, 1996; 4,260,337
shares authorized, issued and outstanding at
December 31, 1995 net of issuance costs $ -- $ 7,000
Series B mandatorily redeemable convertible
preferred stock, $2.14 per share
liquidating preference and redemption
value; $.01 par value; no shares
authorized, issued or outstanding at
December 31, 1996; 3,738,318 authorized and
3,271,030 issued and outstanding at
December 31, 1995, net of issuance costs -- 6,970
------ -------
Total redeemable preferred stock $ -- $13,970
====== =======
</TABLE>
28
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS - (Continued)
In February and March 1994, the Company issued 4,260,337 shares of Series A
mandatorily redeemable convertible preferred stock ("Series A Preferred
Stock") and 695,032 shares of common stock. Upon issuance of the preferred
stock and the common stock, the Company received net proceeds of $6 million
and converted notes payable in the amount of $2.5 million plus accrued
interest of $107,000.
In October 1995, the Company issued 3,271,030 shares of Series B mandatorily
redeemable convertible preferred stock ("Series B Preferred Stock"). Upon
issuance, the Company received net proceeds of $6 million and converted
notes payable in the amount of $1 million which was issued in August 1995 in
the form of a bridge loan.
In January 1996, the Company issued an additional 442,235 shares of Series B
Preferred Stock, resulting in net proceeds to the Company of $927,000.
All shares of Series A and Series B Preferred Stock converted into 3,543,819
shares of common stock at the conversion ratio of 2.25 shares of Preferred
Stock for each share of common stock upon the closing of the Company's
initial public offering in June 1996.
8. Stockholders' Equity
Reverse Common Stock Split
A 1-for-2.25 reverse stock split of the Company's common stock became
effective on May 7, 1996. All shares of common stock, options and per share
amounts included in the accompanying financial statements have been adjusted
to give retroactive effect to the reverse stock split for all years
presented.
Initial Public Offering
In June 1996, the Company completed an initial public offering of 1,900,000
shares of its common stock. The net proceeds to the Company were
approximately $21.5 million.
Preferred Stock
On April 3, 1996, the stockholders of the Company authorized 1,000,000
shares of $0.01 par value preferred stock. Preferred stock may be issued at
the discretion of the Board of Directors of the Company (without stockholder
approval) with such designations, rights and preferences as the Board of
Directors may determine from time to time. The preferred stock may have
dividend, liquidation, redemption, conversion, voting or other rights which
may be more expansive than the rights of the holders of common stock.
Treasury Stock
Common stock held in treasury at December 31, 1995 represents the Company's
repurchase of common stock at cost. These shares were reissued in
conjunction with the Company's initial public offering in June 1996.
29
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS - (Continued)
9. Stock Plan
The Company maintains three stock plans which provide for the granting of
incentive stock options, non-qualified stock options and restricted stock to
employees, directors and certain other individuals.
The 1992 Stock Option Plan (the "1992 Plan") provides for the issuance of a
maximum of 692,869 shares of common stock pursuant to the grant of incentive
and non-qualified stock options. Incentive stock options may be granted to
any officer or employee at an exercise price per share of not less than the
fair market value per common share on the date of such grant as determined
by the Board of Directors (not less than 110% of such value in the case of
holders of 10% or more of the total combined voting power of all classes of
the Company's stock). Non-qualified options may be granted to any employee,
officer, director or consultant at an exercise price per share to be
specified by the Board of Directors on the date of grant. Options granted
under the 1992 Plan are exercisable over periods determined by the Board of
Directors, not to exceed ten years from the date of grant. The Company does
not intend to issue any additional options under the 1992 Plan, but options
that are forfeited will become available for grant under the 1996 Omnibus
Stock Plan (the "Omnibus Plan").
Under the terms of the Omnibus Plan, employees, directors and certain other
individuals may be awarded incentive stock options, nonqualified stock
options or restricted stock. The Omnibus Plan provides for the issuance of a
maximum of 250,000 shares of common stock, plus such additional number of
shares that become available due to the forfeiture of options granted under
the 1992 Plan. The term of each option cannot exceed ten years (five years
for options granted to holders of 10% or more of the total voting power of
all classes of the Company's stock). Incentive stock options must be granted
at an exercise price equal to the fair market value of the stock on the date
of grant and vest over a period not to exceed 10 years. On February 4, 1997,
the Board of Directors adopted, subject to stockholders approval, an
amendment to the Omnibus Plan which increased the shares available for
issuance under the plan to 800,000 shares.
The 1996 Non-Employee Director Stock Option Plan (the "Director Stock Option
Plan") provides for the grant of options for the purchase of up to 100,000
shares of common stock of the Company. Under the terms of the Director Stock
Option Plan, each non-employee director will receive an option to purchase
2,500 shares of common stock at each annual meeting of stockholders. In
addition, each new non-employee director will receive upon his or her
initial election an option to purchase 10,000 shares of common stock. The
term of each option cannot exceed ten years. All options granted under the
plan will be at an exercise price equal to the fair market value of the
stock on the date of grant and will vest evenly over a four year period. On
February 4, 1997, the Board of Directors adopted, subject to stockholders
approval, an amendment to the Director Stock Option Plan which increased the
shares available for issuance under the Plan to 150,000 shares.
30
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS - (Continued)
Stock option activity is summarized as follows:
<TABLE>
<CAPTION>
Weighted
Number of Average
Shares Exercise Price
--------- --------------
<S> <C> <C>
Outstanding at December 31, 1993 97,331 $2.14
Granted 425,643 1.69
Forfeited (89,333) 1.69
Exercised --
--------
Outstanding at December 31, 1994 433,641 1.80
Granted 49,548 1.69
Forfeited (4,311) 1.69
Exercised --
--------
Outstanding at December 31, 1995 478,878 1.78
Granted 262,324 7.34
Forfeited (3,555) 2.47
Exercised (5,111) 1.69
--------
Outstanding at December 31, 1996 732,536 $3.77
========
</TABLE>
The number and weighted average exercise price of options exercisable at
December 31, 1996, 1995 and 1994 is 284,222 and $1.81; 141,889 and $1.82;
and 42,550 and $1.94, respectively.
The following table summarizes information about stock options outstanding
at December 31, 1996:
<TABLE>
<CAPTION>
Options Outstanding Options Exercisable
------------------------------------------- ---------------------------
Weighted
average Weighted
remaining average Weighted
Range of Number contractual exercise Number average
exercise prices outstanding life price exercisable price
- --------------- ----------- ----------- -------- ------------ --------
<S> <C> <C> <C> <C> <C>
$1.69 469,769 7.37 $1.69 275,850 $1.69
5.63 11,553 5.88 5.63 8,261 5.63
6.75 207,770 9.14 6.75 111 6.75
9.60 to 10.00 51,444 9.47 9.97 -- --
-------- --------
$1.69 to 10.00 732,536 284,222
======== ========
</TABLE>
31
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS - (Continued)
An aggregate of 50,000 shares of common stock is reserved for issuance
pursuant to the 1996 Employee Stock Purchase Plan (the "Stock Purchase
Plan"). Employees whose customary employment is in excess of 20 hours per
week and five months per year and who own less than 5% of stock in the
Company will be eligible to participate in the plan. Employees participating
in the plan will have the opportunity to purchase common stock at a price
equal to the lesser of 85% of the fair market value on the date the right
was granted or 85% of the fair market value on the date the right was
exercised.
Compensation cost based upon the fair value approach as prescribed under
SFAS 123 has not been recognized for the stock plans as the Company adopted
the disclosure-only provision of SFAS 123. Had compensation for the
Company's stock plans been determined based on the fair value at the grant
date for awards in 1996 and 1995 consistent with the provisions of SFAS 123,
the Company's net loss and net loss per share would not have been materially
different.
The fair value of each option grant was estimated on the grant date using
the Black-Scholes option-pricing model with the following weighted average
assumptions for 1996 and 1995: expected option term of five years; dividend
yield of 0%; risk free interest rate of 5.6 % and 6.2 % in 1996 and 1995,
respectively ; and expected volatility of 0% for options granted prior to
the initial filing of the Company's registration statement on Form S-1 in
April 1996 and 55% for options granted subsequent to April 1996. The
weighted average fair value per option for options granted in 1996 and 1995
was $2.46 and $ .44, respectively.
Because options vest over several years and additional option grants are
expected to be made in subsequent years, the pro forma impact on 1996 and
1995 is not representative of the pro forma effects of reported net income
(loss) and net income (loss) per share for future years.
10. Retirement Savings Plan
The Company provides an employee retirement savings plan under Section
401(k) of the Internal Revenue Code (the "Plan") which covers substantially
all employees. Under the terms of the Plan, employees may contribute a
percentage of their salary, up to a maximum of 15%, which is then invested
in one or more of several mutual funds selected by the employee. The Company
may make contributions to the Plan at their discretion; no contributions
have been made since inception of the Plan.
11. Significant Customers and Geographic Information
For 1996, 1995 and 1994, sales approximating 13% , 13% and 27% of total
sales, respectively, were attributable to one customer. No other customer
accounted for greater than 10% of net sales for 1996, 1995 and 1994.
Export sales were 27% (13% to Japan, 10% to Europe and 4% to other regions)
and 15% (13% to Europe and 2% to other regions) of total sales for 1996 and
1995, respectively. The Company's export sales for 1994 accounted for less
than 10% of total sales.
32
<PAGE>
INNOVASIVE DEVICES, INC.
NOTES TO FINANCIAL STATEMENTS - (Continued)
12. Commitments
Related Party Transaction
In October 1995, the Company entered into Research & Development,
Distribution and Supply agreements (the "Agreements") with Collagen
Corporation. At December 31, 1996, Collagen Corporation beneficially owned
843,936 shares of the Company's common stock representing an 11.6% ownership
interest. Pursuant to the Agreements, the Company will fund up to $1.7
million of research and development efforts performed by the Collagen
Corporation to develop certain products. In consideration for the funding
provided, the Company will receive certain rights to market, sell and
distribute certain products, subject to satisfying certain minimum sales
requirements, resulting from such research and development efforts. The
Agreements are cancelable upon the earlier of two years from the effective
date of the Agreements or the expenditure of $1.2 million on the initial
research project. Total research and development expense incurred under the
Agreements was $664,000 and $265,000 for 1996 and 1995, respectively.
Facility Lease
In March 1996, the Company entered into a non-cancelable operating lease for
office and production facilities which expires on May 31, 2002. The future
minimum lease commitments are approximately as follows:
<TABLE>
<CAPTION>
(In thousands)
<S> <C>
1997 $ 148
1998 187
1999 215
2000 221
2001 221
Thereafter 92
------------
$1,084
============
</TABLE>
Total rent expense under noncancellable facility leases was approximately
$172,000, $110,000 and $92,000 for the years ended December 31, 1996, 1995
and 1994, respectively.
13. Subsequent Event
On February 4, 1997, the Company entered into an asset purchase agreement to
acquire substantially all of the operating assets and liabilities of
MedicineLodge Inc. (MLI), in exchange for 1,885,000 shares of the Company's
common stock. MLI designs, develops and manufactures proprietary implantable
medical devices and related instrumentation. The acquisition is subject to
certain conditions, including approval of the Company's stockholders, and,
if approved, is expected to be consummated in June 1997. The acquisition
will be accounted for using the purchase method. Accordingly, the results of
operations of MLI will be included with those of the Company for periods
subsequent to the date of the acquisition.
33
<PAGE>
Item 9. Changes in and Disagreements with Accountants
on Accounting and Financial Disclosure
Not Applicable
34
<PAGE>
Part III
Item 10. Directors and Executive Officers of the Registrant
The directors and executive officers of the Company are as
follows:
<TABLE>
<CAPTION>
Name Age Position
---- --- --------
<S> <C> <C>
Richard D. Randall 45 President, Chief Executive Officer and Director
James E. Nicholson 57 Chief Technical Officer and Director
James V. Barrile 42 Executive Vice President of Finance, Chief
Financial Officer and Treasurer
Eric L. Bannon 38 Vice President of Regulatory Affairs and
Quality Assurance
Rickey D. Hart 33 Vice President of Advanced Projects
John T. Rice 44 Vice President of Research and Development
Philip T. Heitlinger 37 Vice President of Sales and Marketing
Royce C. Kahler, Jr. 50 Director of Operations
Karen L. Mattocks 40 Vice President of Clinical Marketing and Education
Joseph A. Ciffolillo (1) 57 Director
Thomas C. McConnell (2) 42 Director
Robert R. Momsen (1) 50 Director
Howard D. Palefsky (2) 50 Director
</TABLE>
--------
(1) Member of the Compensation Committee.
(2) Member of the Audit Committee
Mr. Randall has been President, Chief Executive Officer and a director of
the Company since February 1994. He currently serves as a director of Target
Therapeutics, Inc. ("Target"), a developer of neurovascular devices. He was
employed by Target from June 1989 to January 1994, during which time he
served as President, Chief Executive Officer and Chairman. Mr. Randall
currently serves as Chairman of the Board of Directors of Conceptus, Inc.
("Conceptus"), a developer of minimally invasive devices for reproductive
medical applications. He was also acting President and acting Chief
Executive Officer of Conceptus from December 1992 to July, 1993. Mr. Randall
is also a director of Neuro Navigational Corporation, a minimally invasive
neurosurgery company (from which office Mr. Randall is resigning effective
March 20, 1997).
Mr. Nicholson, a co-founder of the Company, has been a director of the
Company since the Company's inception in September 1991. He has also served
as Chief Technical Officer since February 1994 and President and Chief
Executive Officer from inception to February 1994. He was founder and
President of Nicholson Associates, Inc. ("Nicholson Associates"), a surgical
device company which was formed in June 1990 and merged into the Company in
May 1992. Mr. Nicholson was also a co-founder of Mitek Surgical Products,
Inc., a bone anchor manufacturer, and served as its President from 1985 to
1990. He currently serves as a director of Physiometrix, Inc.
35
<PAGE>
Mr. Barrile, a co-founder of the Company, currently serves as Executive Vice
President of Finance, Chief Financial Officer and Treasurer. He has been
Chief Financial Officer and Treasurer of the Company since the Company's
inception in September 20, 1991. He was formerly Vice President of Finance
from the Company's incention to April 1996. Mr. Barrile was also Treasurer
of Nicholson Associate from September 1991 until its merger into the
Company. From 1978 to 1991, he was employed by Nova Biomedical Corporation,
a medical laboratory instrumentation manufacturer, most recently serving as
Treasurer and Director of Finance.
Mr. Bannon currently serves as Vice President of Regulatory Affairs and
Quality Assurance, having served as Director of Quality Assurance and
Regulatory Affairs from August 1992 to April 1996. From May 1989 to August
1992, he was manager of quality assurance at Dyonics, Inc., an arthroscopic
surgical instrumentation company which is a subsidiary of Smith & Nephew,
Inc.
Mr. Hart, a cofounder of the Company, currently serves as Vice President of
Advanced Projects, having been an engineer in research and development at
the Company from the Company's inception in September 1991 to April 1996.
Mr. Hart was formerly with Nicholson Associates from its inception in June
1990.
Mr. Heitlinger is currently Vice President of Sales and Marketing. He had
been Director of Sales at the Company from February 1994 to December 1996.
From December 1992 to January 1994, he was regional sales manger for
American Surgical Technologies Corporation, a three-dimensional endoscopy
company. From September 1992 to December 1992, Mr. Heitlinger was a sales
representative for Endomedix Corporation, a disposable laparoscopic products
company, and from January 1992 to July 1992 he was regional sales manager
for Birtcher Medical Systems, Inc., an electrosurgery company. Mr.
Heitlinger was between jobs in August 1992. From June 1983 to January 1992,
he held various positions within the Linvatec division of Bristol-Myers
Squibb Company, including those of sales representative, director of
marketing and product manager.
Ms. Mattocks is currently Vice President of Clinical Marketing and
Education. She had been Director of Marketing at the Company from March 1993
to December 1996. From March 1987 to March 1993, Ms. Mattocks was a
marketing manager at Dyonics, Inc.
Mr. Ciffolillo has been a director of the Company since February 1994. Now
retired, from 1987 to March 1995, he was Chief Operating Officer of Boston
Scientific Corporation ("Boston Scientific"), a manufacturer and marketer of
minimally invasive medical devices. From March 1995 until his retirement in
April 1996, he was Executive Vice President-Office of the Chairman, for
Boston Scientific Venture Group, the venture capital division of Boston
Scientific. He is also a director of CompDent Corporation, a dental health
maintenance organization.
Mr. McConnell has been a director of the Company since February 1995. He
joined New Enterprise Associates, a venture capital firm, in 1985 and has
been a general partner since 1989. He is also a director of Conceptus, Inc.,
Applied Imaging Corporation, Cardio Thoracic Systems and Sequana
Therapeutics, Inc., a maker of diagnostics for gene identification.
36
<PAGE>
Mr. Momsen has been a director of the Company since February 1994. He joined
InterWest Partners, a venture capital firm, in 1981 and has been a general
partner since 1982. He is also a director of ArthroCare Corporation, a
manufacturer of arthroscopic surgical equipment, Ventritex, Inc., a
manufacturer of implantable cardiac defibrillators, COR Therapeutics, Inc.,
a developer of cardiovascular pharmaceuticals, Integ, a developer of blood
free fructose monitoring, Coulter Pharmaceutical, a developer of cancer
pharmaceuticals, and Urologix.
Mr. Palefsky has been a director of the Company since September 1995. He was
Chief Executive Officer of Collagen Corporation from 1978 through 1996 and
currently serves as Chairman of Collagen's Board. He is also a director of
Target Therapeutics, Inc., Calgene, Inc., an agricultural biotechnology
company and Sequana Therapeutics, Inc., a maker of diagnostics for gene
identification.
SECTION 16(A) BENEFICIAL OWNERSHIP REPORTING COMPLIANCE
Section 16(a) of the Securities Exchange Act of 1934, as amended (the "1934
Act"), requires the Company's officers and directors and persons who own
more than ten percent of its common stock to file reports with the
Securities and Exchange Commission disclosing their ownership of stock in
the Company and changes in such ownership. Copies of such reports are also
required to be furnished to the Company. Based solely on a review of the
copies of such reports received by it, the Company believes that, during
fiscal 1996, all such filing requirements were complied with, except that
Richard D. Randall, the Chief Executive Officer of the Company, was late in
filing a Form 4 in fiscal year 1996 relating to the purchase of 10,000
shares of common stock in October 1996 and Howard D. Palefsky, a director of
the Company, was late in filing a Form 4 in fiscal year 1996 relating to the
purchase of 2,500 shares of common stock in June 1996.
37
<PAGE>
Item 11. Executive Compensation
Summary Compensation Table
The following summary compensation table sets forth the compensation paid or
accrued for services rendered in fiscal 1996, 1995 and 1994 to the chief
executive officer and the other four most highly compensated executive
officers of the Company (the "Named Executive Officers").
<TABLE>
<CAPTION>
Summary Compensation Table
Long-Term
Compensation
Annual Compensation Awards
------------------------------------------------------
Other Annual Securities All Other
Name and Fiscal Bonus(s) Compensation Underlying Compensation
Principal Position Year Salary ($) ($) ($)(1) Options (#) ($)(2)
------------------ ---- ---------- -------- ------ ----------- ------
<S> <C> <C> <C> <C> <C> <C>
Richard D. Randall - 1996 170,096 35,000 - 44,444 195
President and Chief 1995 150,000 - - 0 244
Executive Officer 1994 149,940 - - 244,445 195
James E. Nicholson - 1996 131,000 - - - -
Chief Technical Officer 1995 130,000 - - - -
1994 128,269 - - - -
James V. Barrile - 1996 122,212 25,000 - 11,111 167
Vice President, Finance and 1995 110,000 - - - 209
Administration 1994 108,210 - - - 139
Philip H. Heitlinger 1996 80,615 - 39,234 11,111 84
Vice President of Sales and 1995 80,000 - 16,237 - 15,981 (3)
Marketing 1994 67,018 10,000 13,200 13,333 162
Karen L. Mattocks 1996 99,558 - 17,039 6,667 128
Vice President of Clinical 1995 95,906 - 4,040 4,444 160
Marketing and Education 1994 94,603 - - 13,334 117
</TABLE>
- ---------
(1) The amounts indicated under "Other Annual Compensation" consist of sales
commissions paid pursuant to achievement of specified goals as set forth in
an established compensation plan.
(2) The amounts indicated under "All Other Compensation" indicate annual
contributions by the Company towards group term life insurance for the
Named Executive Officers. These amounts are included as reportable income
in each individual's Form W-2.
(3) Consists of $104 of group term life insurance premiums and $15,877 for
reimbursement of moving expenses.
38
<PAGE>
Options Grants Table
The following table shows all stock option grants to the Named Executive
Officers during fiscal 1996.
<TABLE>
<CAPTION>
Name Number of Shares Percent of Total Exercise Price Expiration Potential Realizable
---- Underlying Options Options Granted to Per Share Date Value at Assumed Annual
Granted (#) Employees --------- ---- Rate of Stock Price
---------- in Fiscal Year Appreciation for
------------------ Option Term (1)
---------------
5% 10%
-- ---
<S> <C> <C> <C> <C> <C> <C>
Richard D. Randall..... 44,444(2) 23% $6.75 2/20/06 $188,443 $477,773
James E. Nicholson..... - - - - - -
James V. Barrile....... 11,111(2) 6% 6.75 2/20/06 47,111 119,443
Philip H. Heitlinger... 11,111(3) 6% 6.75 2/20/06 47,111 119,443
Karen L. Mattocks...... 6,667(3) 3% 6.75 2/20/06 28,268 71,670
</TABLE>
- ----------------------
(1) As required by the rules of the Securities and Exchange Commission,
potential values stated are based on the prescribed assumption that the
Company's common stock will appreciate in value from the date of grant to
the end of the option term at rates (compounded annually) of 5% and 10%,
respectively, and therefore are not intended to forecast possible future
appreciation, if any, in the price of the Company's common stock.
(2) These options vest in four (4) equal annual installments, commencing on
February 20, 1997, the first anniversary of the date of grant, subject
to continuing employment.
(3) Consists of 6,667 options for Mr. Heitlinger and Ms. Mattocks which vest
January 1, 2006. The remaining 4,444 options granted to Mr. Heitlinger vest
under the terms stated in Note (2).
Aggregated Option Exercises and Fiscal Year-End Option Value Table
The following table sets forth information regarding the number of options
exercised in fiscal 1996 and the number of vested and unvested options and the
unrealized value or spread (the difference between the exercise price and the
market value) of the unexercised options issued by the Company and held by the
Named Executive Officers on December 31, 1996.
<TABLE>
<CAPTION>
Number of Shares Underlying Value of Unexercised
Shares Unexercised Options(#) In-the-Money Options($)
Acquired on Value --------------------------- --------------------------
Name Exercise (#) Realized Vested Unvested Vested Unvested
- --- ----------- -------- ------ -------- ------ --------
<S> <C> <C> <C> <C> <C> <C>
Richard D. Randall............. - - 142,667 146,222 $864,562 $661,219
James E. Nicholson............. - - - - - -
James V. Barrile............... - - - 11,111 - 11,111
Philip H. Heitlinger........... - - 6,666 17,778 40,396 51,513
Karen L. Mattocks.............. 4,444 $22,487 5,000 15,001 30,300 57,191
</TABLE>
39
<PAGE>
Compensation of Directors
The Company's directors may be reimbursed for certain expenses in connection
with attendance at Board and committee meetings. Under the Company's 1996
Non-Employee Director Stock Option Plan each non-employee director serving
as such on the date of the Annual Meeting of the Board of Directors is
entitled to receive on such date an option to purchase 2,500 shares of
Common Stock (subject to vesting over four annual periods), exercisable at a
price per share equal to fair market value on the date of grant. Any non-
employee director, upon his or her first election to the Board of Directors,
is entitled to receive an option to purchase 10,000 shares of Common Stock.
Board Compensation Committee Report on Executive Compensation
This report, prepared by the Compensation Committee of the Company's Board
of Directors (the "Committee"), addresses the Company's executive
compensation policies and the basis on which fiscal 1996 executive officer
compensation determinations were made. The Committee designs and approves
all components of executive pay.
To ensure that executive compensation is designed and administered in an
objective manner, the Committee's members are all non-employee directors.
During fiscal 1996, the Committee members were Messrs. Ciffolillo and
Momsen.
Compensation Philosophy
The Company's executive compensation policies are intended to attract,
retain, motivate and reward executives who can lead the Company in achieving
its long-term growth and earnings goals. The objective of the Committee is
to implement a compensation program that will provide appropriate incentives
while, at the same time, encouraging executive officers to increase their
equity ownership in the Company and thereby align their interests with those
of the Company's stockholders. The compensation program consists primarily
of three components, namely (a) base salary, (b) bonus and (c) stock
options. Each of these factors are further described below. In addition,
executive officers are eligible to participate, on a non-discriminatory
basis, in various benefit programs provided to all full-time employees,
including the Company's stock purchase plan, 401(k) plan and group medical,
disability and life insurance programs. The Committee believes that
executive compensation packages should be viewed as a whole in order to
assess properly their appropriateness.
In establishing total compensation packages for the Company's executive
officers, the Committee takes into account the compensation packages offered
to executives of other medical device design and manufacturing companies of
similar stature. The Committee uses this comparative data primarily as
benchmarks to ensure that the Company's executive compensation packages are
competitive. The Committee seeks to maintain total compensation within the
broad middle range of comparative pay. The Committee generally meets
quarterly and at other times that it deems are necessary and, from time to
time, confers with outside advisors concerning acceptable industry
practices. Individual amounts are based not only on comparative data, but
also on such factors as length of service with the Company and the
Committee's judgment as to individual contributions. These factors are not
assigned specific mathematical weights.
40
<PAGE>
Salary
Base salaries are reviewed annually. It is the Committee's intention to pay
slightly below-market base salary but provide a significant equity ownership
opportunity to create incentives for the Company's executive officers to
maximize the Company's growth and success while increasing stockholders'
value over the long term. Changes in base salary from year to year depend
upon such factors as individual performance, cost of living changes and the
economic and business conditions affecting the Company.
Richard D. Randall's base salary was increased from $150,000 to $175,000 on
April 1, 1996, an increase of 16.67%. This increase was largely based on his
contributions to the Company's meeting its growth and profit objectives.
Bonus
Executive bonuses are determined in accordance with achievement of the
Company's goals for the most recent fiscal year. The amounts are intended to
reward management for achieving certain milestones set out at the beginning
of the fiscal year. Among these are growth in operating profit, sales and
earnings. The cash bonus for the Chief Executive Officer is also influenced
by his ability to execute strategic plans determined by the Board of
Directors, including merger and acquisition programs.
Stock Options
As noted above, stock options are an important component of total executive
compensation. Stock options are considered long-term incentives that link
the long-term interests of management with those of the Company's
stockholders. Stock options that the Committee has granted to executive
employees generally vest over a four year period from the date of grant at
the rate of 25% per fiscal year, commencing at the end of the year in which
they are granted. The Committee also granted in 1996 a special option to
sales employees, including certain executive marketing and sales officers of
the Company, which were exercisable only after ten years unless the
individual sales targets of the recipients were achieved, if individual
sales targets were acheived, the exercisability of the options would
accelerate to the standard four-year vesting schedule for sales employees
(20% after the first and second year and 30% after the third and fourth
year). The 1996 sales targets of the executive officers of the Company to
whom these special options were granted were not achieved, so the options
granted to such officers are not exercisable until 2006. Option exercise
prices are set at 100% of the fair market value of the stock at the date of
the grant and expire after ten years. The Committee has absolute discretion
to determine the recipients and the number of options to be awarded. Each
award is at the Committee's discretion and is not subject to any specific
formula or criteria. The Committee generally awards options on an annual
basis. The number of shares for which options were granted to executive
officers in fiscal 1996 was determined by the Committee based upon several
factors, including the executive's position, his past and future expected
performance, the comparative data described above, and the number of shares
under options previously granted. These factors were evaluated in a
qualitative manner and were not assigned predetermined weights.
41
<PAGE>
Section 162(m)
Section 162(m) of the Internal Revenue Code which became effective January
1, 1994, generally limits the deductibility of annual compensation for
certain officers to $1 million. It is the general intention of the Committee
to assure that officer compensation will meet the Section 162(m)
requirements for deductibility. However, the Committee reserves the right to
use its judgment to authorize compensation payments which may be in excess
of the limit when the Committee believes such payment is appropriate, after
taking into consideration changing business conditions or the officer's
performance, and is in the best interest of the shareholders. The Committee
will review its policy concerning Section 162(m) on a year-by-year basis.
Compensation Committee
Joseph A. Ciffolillo
Robert R. Momsen
42
<PAGE>
Comparison of Cumulative Total Stockholder Return
The following performance graph assumes an investment of $100 on June 7,
1996 (the day following the date the Company's common stock was first
registered under Section 12 of the 1934 Act) and compares the changes
thereafter in the market price of the Company's common stock with a broad
market index (Standard & Poor's SmallCap 600) and an industry index
(Standard & Poor's Health Care - Medical Products). The Company paid no
dividends during the periods shown; the performance of the indexes is shown
on a total return (dividend reinvestment) basis. The graph lines merely
connect the initial public offering date and the fiscal year-end dates and
do not reflect fluctuations between those dates.
<TABLE>
<CAPTION>
Graph
Total Return Data Summary Cumulative Total Return
-----------------------------
06/07/96 12/31/96
-------- --------
<S> <C> <C>
Innovasive Devices, Inc. IDEA 100 62
S&P 600 IMID 100 105
S&P Healthcare (Medical MDP 100 113
Products and Supplies)
</TABLE>
The Compensation Committee Report on Executive Compensation and the
Comparison of Cumulative Total Stockholder Return information above shall
not be deemed "soliciting material" or incorporated by reference into any of
the Company's filings with the Securities and Exchange Commission by
implication or by any reference in any such filing to this Annual Report.
43
<PAGE>
Item 12. Security Ownership of Certain Beneficial Owners and Management
The following table sets forth certain information regarding beneficial
ownership of the Company's common stock as of March 3, 1997 by (a) each
director and nominee for director of the Company, (b) each of the executive
officers named in the Summary Compensation Table below, (c) each person
known by the Company to own beneficially 5% or more of its Common Stock and
(d) all current directors and executive officers as a group. Except as
otherwise indicated, each person has sole investment and voting power with
respect to the shares shown as being beneficially owned by such person,
based on information provided by such owners.
<TABLE>
<CAPTION>
Shares Percentage
Beneficially of
Executive Officers, Directors and Nominees Owned Common Stock
------------------------------------------ ----- ------------
<S> <C> <C>
Richard D. Randall(1).............................. 225,051 3.0
James E. Nicholson................................. 411,351 5.7
James V. Barrile(2)................................ 180,555 2.9
Joseph A. Ciffolillo(3)............................ 69,426 *
Thomas C. McConnell(4)............................. 743,863 10.2
Robert R. Momsen(5)................................ 675,727 9.3
Howard D. Palefsky(6).............................. 846,436 11.6
Karen L. Mattocks(7)............................... 12,778 *
Philip H. Heitlinger(8)............................ 11,110 *
Richard B. Caspari(9).............................. 0 0
Alan Chervitz(10).................................. 0 0
5% Stockholders
- ---------------
Collagen Corporation................................ 843,936 11.6%
2500 Faber Place, Palo Alto, CA 94303
Entities affiliated with InterWest Partners (11).... 675,727 9.3
3000 Sand Hill Road, Building 3, Suite 255
Menlo Park, CA 94025
New Enterprise Associates VI, Limited Partnership... 743,863 10.2
2490 Sand Hill Road, Menlo Park, CA 94025
Delphi Ventures II, L.P.(12)........................ 587,443 8.1
3000 Sand Hill Road, Building 1, Suite 135
Menlo Park, CA 9025
S. Richard Penni.................................... 485,612 6.7
100 Hancock Street, N. Quincy, MA 02171
All current executive officers and directors
as a group (13 persons)(13)........................ 3,332,976 43.8
</TABLE>
- ---------
* Less than 1.0% of the outstanding Common Stock.
(1) Includes 204,667 shares which Mr. Randall may acquire within 60 days of
March 3, 1997 by exercise of options.
(2) Includes 2,777 shares which Mr. Barrile may acquire within 60 days of
March 3, 1997 by exercise of options.
44
<PAGE>
(3) Consists of 53,872 shares held by an investment company of which Mr.
Ciffolillo is the president and 15,554 shares which Mr. Ciffolillo may
acquire within 60 days of March 3, 1997 by exercise of options. Mr.
Ciffolillo may be deemed to share voting and investment power with respect
to the shares held by the investment company. He disclaims beneficial
ownership of such shares except to the extent of his proportionate interest
therein.
(4) Consists of 743,863 shares held by New Enterprise Associates VI, Limited
Partnership with respect to which Mr. McConnell may be deemed to share
voting and investment power by virtue of his status as a general partner of
NEA Partners VI, Limited Partnership, the general partner of New
Enterprises Associates VI, Limited Partnership. Mr. McConnell disclaims
beneficial ownership of the shares held by such entities except to the
extent of his proportionate partnership interest therein.
(5) Consists of 671,363 shares held by InterWest Partners V, L.P. ("IWP") and
4,364 shares held by InterWest Investors V, L.P. ("IWI"). Mr. Momsen is a
general partner of InterWest Management Partners V, L.P., the general
partner of IWP, and a general partner of IWI and accordingly may be deemed
to share voting and investment power with respect to these shares. Mr.
Momsen disclaims beneficial ownership of the shares held by such entities
except to the extent of his proportionate partnership interest therein.
(6) Consists of 2,500 shares held directly by Mr. Palefsky and 843,936 shares
held by Collagen Corporation. Mr. Palefsky is Chairman of the Board of
Collagen Corporation and, accordingly may be deemed to share voting and
investment power with respect to such shares. Mr. Palefsky disclaims
beneficial ownership of these shares.
(7) Includes 8,334 shares which Ms. Mattocks may acquire within 60 days of
March 3, 1997 by exercise of options.
(8) Consists of shares which Mr. Heitlinger may acquire within 60 days of
March 3, 1997 by exercise of options.
(9) Dr. Caspari is a nominee for director of the Company and does not currently
own any Common Stock of the Company. He is a principal stockholder of
MedicineLodge, Inc., a Delaware corporation ("MLI"). Pursuant to a
definitive purchase agreement between the Company and MLI dated as of
February 4, 1997, the Company has agreed to acquire certain operating
assets and to assume certain liabilities of MLI in exchange for the
Company's Common Stock, subject to the approval of the Company's
stockholders. One of the conditions to closing of the acquisition is the
nomination of Dr. Caspari as a director of the Company. Upon his election
as a director and approval by the Company's stockholders of the acquisition
of MLI, upon which his election is conditioned, Dr. Caspari will be granted
options to purchase 10,000 shares of the Company's Common Stock pursuant to
the Company's 1996 Non-Employee Director Stock Option Plan. Dr. Caspari
will also be granted options to purchase 40,000 shares of the Company's
Common Stock pursuant to the terms of a Consulting Agreement. As a
principal stockholder of MLI, Dr. Caspari will be entitled beneficially to
his pro rata portion of the shares of Common Stock which will be issued by
the Company as consideration for the purchase of MLI's assets. Dr. Caspari
and his wife, Judith Caspari, together own approximately 19.5% of the
shares of MLI which are expected to be outstanding at the time the
acquisition is closed, assuming the exercise of all outstanding MLI stock
options, which will represent a beneficial interest in 368,329 shares of
the Common Stock of the Company upon closing of the acquisition.
(10) Mr. Chervitz is a nominee for director of the Company and does not
currently own any Common Stock of the Company. He is also a principal
stockholder of MLI. Another condition to closing of the acquisition is the
nomination of Mr. Chervitz as a director of the Company. Upon his election
as a director and approval by the Company's stockholders of the acquisition
of MLI, upon which his election is conditional, Mr. Chervitz will be
granted options to purchase 35,000 shares of the Company's Common Stock
pursuant to the Company's 1996 Omnibus Stock Plan. As a principal
stockholder of MLI, Mr. Chervitz will be entitled beneficially to his pro
rata share of the shares of Common Stock issued by the Company as
consideration for the purchase of MLI's assets. Mr. Chervitz owns
approximately 14.6% of the shares of MLI which are expected to be
outstanding at the time the acquisition is closed, assuming the exercise of
all outstanding MLI stock options, which will represent a beneficial
interest in 275,022 shares of the Common Stock of the Company upon closing
of the acquisition.
(11) Consists of 671,363 shares held by IWP and 4,364 shares held by IWI.
(12) Consists of 584,452 shares held by Delphi Ventures II, L.P. and 2,991
shares held by Delphi BioInvestments II, L.P.
(13) Includes 2,263,526 shares beneficially owned by entities affiliated with
Messrs. Ciffolillo, McConnell, Momsen and Palefsky, for which they disclaim
beneficial ownership except to the extent of their proportionate interest
therein and 2,500 shares held directly by Mr. Palefsky. Also includes
339,105 shares which the executive officers and directors may acquire
within 60 days of March 3, 1997 by exercise of options.
45
<PAGE>
Item 13. Certain Relationships and Related Transactions
Related Party Transaction
In October 1995, the Company entered into Research & Development,
Distribution and Supply agreements (the "Agreements") with Collagen
Corporation. At December 31, 1996 Collagen Corporation beneficially owned
843,936 shares of the Company's common stock representing an 11.6% ownership
interest. At December 31, 1996, the Company had expended approximately
$929,000 pursuant to the Agreements. Collagen Corporation has the right to
designate one member of the Company's Board of Directors so long as it holds
at least five percent of the Company's outstanding Common Stock on a fully-
diluted basis. Mr. Palefsky, Collagen Corporation's Chairman, currently
serves as Collagen Corporation's designee on the Company's Board of
Directors.
46
<PAGE>
Part IV
ITEM 14. Exhibits, Financial Statements, Schedules, and Reports on Form 8-K
(a) The following documents are filed as a part of this report:
(1) Financial Statements - See Index to Financial Statements at
Item 8 of this report.
(2) Financial Statement Schedules
(3) Exhibits
47
<PAGE>
ITEM 14. (a)(2) Financial Statement Schedules
Schedule II
Valuation and Qualifying Accounts and Reserves for the Three Years Ended
December 31, 1996
<TABLE>
<CAPTION>
Balance at Charged to Charged Deductions Balance
(In thousands) beginning costs and to other and at end of
of period expenses accounts write-offs period
--------- -------- -------- ---------- ---------
<S> <C> <C> <C> <C> <C>
Allowance for doubtful accounts
December 31, 1994 $ 9 $ - $ - $ (1) $ 8
December 31, 1995 8 50 - (8) 50
December 31, 1996 50 52 - (15) 89
Inventory obsolescence reserve
December 31, 1994 175 81 - (16) 240
December 31, 1995 240 233 - (84) 389
December 31, 1996 389 293 - (60) 622
Deferred tax assets valuation
allowance
December 31, 1994 - - 1,455(1) - 1,455
December 31, 1995 1,455 - 1,601 3,056
December 31, 1996 3,056 - 1,720 4,776
</TABLE>
(1) Includes $199 recorded as of January 1, 1994 upon adoption of Statement
of Financial Accounting Standards No. 109.
48
<PAGE>
Item 14. (a)(3) Exhibits
INNOVASIVE DEVICES, INC.
EXHIBIT INDEX
Exhibit
11 Statement Regarding Computation of Pro Forma Net Loss per Share
23 Consent of Price Waterhouse LLP, Independent Auditors
27 Financial Data Schedule
99 Cautionary statement for purposes of the "Safe Harbor"
provisions of the Private Securites Litigation
Reform Act of 1995.
49
<PAGE>
Exhibit 11
INNOVASIVE DEVICES, INC.
Statement Regarding Computation of Pro Forma Net Loss Per Common Share
(In thousands; except per share data)
<TABLE>
<CAPTION>
Year Ended December 31,
------------------------------------
1996 1995
---- ----
<S> <C> <C>
Net loss $ (4,062) $ (3,734)
========== ==========
Weighted average common shares outstanding:
a. Shares attributable to common
stock outstanding 4,911 1,811
b. Shares attributable to mandatorily
convertible preferred stock 1,522 3,002
c. Shares attributable to common stock
options pursuant to SAB 83 (1) 32 126
---------- ----------
Weighted average common shares outstanding 6,465 4,939
========== ==========
Net loss per share $(0.63) $(0.76)
========== ==========
</TABLE>
__________
(1) No shares were attributed to common stock options subsequent to March 31,
1996, since, in accordance with APB 15, the inclusion of such shares would
be anti-dilutive.
<PAGE>
Exhibit 23
CONSENT OF INDEPENDENT ACCOUNTANTS
We hereby consent to the incorporation by reference in the Registration
Statement on Form S-8 (No. 333-11815) of Innovasive Devices, Inc. of our report
dated February 19, 1997 appearing on page 19 of this Form 10-K.
PRICE WATERHOUSE LLP
Boston, Massachusetts
March 26, 1997
<TABLE> <S> <C>
<PAGE>
<ARTICLE> 5
<LEGEND>
THIS SCHEDULE CONTAINS SUMMARY FINANCIAL INFORMATION EXTRACTED FROM THE BALANCE
SHEET AT DECEMBER 31, 1996 AND THE STATEMENT OF OPERATIONS FOR THE YEAR ENDED
DECEMBER 31, 1996 AND IS QUALIFIED IN ITS ENTIRETY BY REFERENCE TO SUCH
FINANCIAL STATEMENTS.
</LEGEND>
<MULTIPLIER> 1,000
<CURRENCY> U.S. DOLLARS
<S> <C>
<PERIOD-TYPE> YEAR
<FISCAL-YEAR-END> DEC-31-1996
<PERIOD-START> JAN-01-1996
<PERIOD-END> DEC-31-1996
<EXCHANGE-RATE> 1
<CASH> 12,825
<SECURITIES> 9,861
<RECEIVABLES> 848
<ALLOWANCES> 89
<INVENTORY> 859
<CURRENT-ASSETS> 24,416
<PP&E> 1,562
<DEPRECIATION> 640
<TOTAL-ASSETS> 25,363
<CURRENT-LIABILITIES> 1,575
<BONDS> 0
0
0
<COMMON> 1
<OTHER-SE> 23,787
<TOTAL-LIABILITY-AND-EQUITY> 25,363
<SALES> 4,353
<TOTAL-REVENUES> 4,353
<CGS> 1,611
<TOTAL-COSTS> 1,611
<OTHER-EXPENSES> 0
<LOSS-PROVISION> 0
<INTEREST-EXPENSE> 0
<INCOME-PRETAX> (4,062)
<INCOME-TAX> 0
<INCOME-CONTINUING> (4,062)
<DISCONTINUED> 0
<EXTRAORDINARY> 0
<CHANGES> 0
<NET-INCOME> (4,062)
<EPS-PRIMARY> (0.63)
<EPS-DILUTED> (0.63)
</TABLE>
<PAGE>
Exhibit 99
CAUTIONARY STATEMENT FOR PURPOSES OF THE
"SAFE HARBOR" PROVISIONS OF THE PRIVATE
SECURITIES LITIGATION REFORM ACT OF 1995
Innovasive Devices, Inc. (the "Company") desires to take advantage of the "safe
harbor" provisions of the Private Securities Litigation Reform Act of 1995 (the
"Act"). Except for the Conference Report, no official interpretations of the
Act's provisions have been published. All of the following important factors
discussed below have been discussed in the Company's Registration on Form S-1,
File No. 333-3368 under the Securities Act of 1933, which was declared effective
by the Securities Exchange Commission (the "Commission") on June 5, 1996.
Forward Looking Statements; Cautionary Statement. When used anywhere in future
filings by the Company with the Securities and Exchange Commission, in the
Company's press releases and in oral statements made with the approval of an
authorized executive officer of the Company, the words or phrases "will likely
result", "are expected to", "will continue", "is anticipated", "project", or
"outlook" or similar expressions (including confirmations by an authorized
executive officer of the Company of any such expressions made by a third party
with respect to the Company) are intended to identify "forward-looking
statements" within the meaning of the Private Securities Litigation Reform Act
of 1995. The Company wishes to caution readers not to place undue reliance on
any such forward-looking statements, which speak only as of the date made. Such
statements are subject to certain risks and uncertainties that could cause
actual results to differ materially from historical earnings and those presently
anticipated or projected. These risk factors are described below. The Company
specifically declines any obligation to publicly release the result of any
revisions which may be made to any forward-looking statements to reflect
anticipated or unanticipated events or circumstances occurring after the date of
such statements.
The Company wishes to caution readers that the following important factors,
among others, in some cases have affected, and in the future could affect, the
Company's actual results and could cause the Company's actual consolidated
results for the Company's current quarter and beyond, to differ materially from
those expressed in any forward-looking statements made by, or on behalf of, the
Company:
History of Losses; Probability of Substantial Additional Future Losses;
Uncertainty of Future Results; Seasonality of Sales. The Company has incurred
substantial operating losses since its inception and, as of December 31, 1996,
had an accumulated deficit of $16.0 million. These losses have resulted
principally from expenses associated with research and development efforts,
expenses associated with obtaining United States Food and Drug Administration
("FDA") clearance and the establishment of the Company's sales and marketing
organization. The Company expects to generate additional losses as it continues
to expend substantial resources in research and product development, funding of
clinical trials in support of obtaining necessary regulatory clearances or
approvals and expanding its manufacturing capabilities and marketing and sales
activities. Results of operations may fluctuate significantly from quarter to
quarter due to the timing of such expenditures, absence of a backlog of orders,
timing of the receipt of orders, promotional discounts of the Company's
products, timing of regulatory actions, introduction of new products by
competitors of the Company, pricing of competitive products and the cost and
effect of promotional and marketing programs. In addition, the Company
anticipates some seasonality due to the fact that generally fewer surgical
procedures are performed during the third quarter. The seasonal pattern may
cause fluctuations in the Company's results of operations. It is difficult to
<PAGE>
predict the impact that this seasonality will have on the Company's results of
operations because of its limited operating history. The Company's revenue and
profitability will be critically dependent on expanding applications for its
current product lines both within arthroscopy and in other clinical specialties.
In addition, the Company's profitability could be adversely affected if it is
required to sell its products at reduced prices. There can be no assurance that
significant revenues or profitability will ever be achieved.
Potential Volatility of Stock Price. The stock market has from time to time
experienced significant price and volume fluctuations that are unrelated to the
operating performance of particular companies. These broad market fluctuations
may adversely affect the market price of the Company's Common Stock. In
addition, the market price of the shares of Common Stock is likely to be highly
volatile. Factors such as fluctuations in the Company's operating results,
announcements of technological innovations or new products by the Company or its
competitors, FDA and international regulatory actions, actions with respect to
reimbursement matters, developments with respect to patents or proprietary
rights, mergers or acquisitions involving competitors, public concern as to the
safety of products developed by the Company or others, changes in health care
policy in the United States and internationally, changes in stock market analyst
recommendations regarding the Company, other medical device companies or the
medical device industry generally and general market conditions may have a
significant effect on the market price of the Common Stock.
Uncertainty of Market Acceptance. The Company's future prospects depend
significantly on increasing penetration of existing markets, acceptance of the
Company's products in new markets, and the development of new products for its
existing and future markets. There can be no assurance that any of the Company's
existing or future products will gain market acceptance among physicians,
patients or healthcare payors, even if reimbursement and necessary regulatory
approvals are obtained. To date, the Company's marketing efforts have been
directed primarily the sports medicine segment of the orthopedic market for
tissue-to-bone fixation applications. The Company has no experience in
establishing marketing or distribution channels in other clinical areas. With
respect to its current products, the Company was not the first to market devices
for the attachment of soft tissue to bone and therefore, to succeed must both
take market share away from its existing competitors and create new demand for
its products. The size of the market for the Company's products will depend in
part on the Company's ability to persuade physicians that its products offer
clinical and other advantages over existing means of attaching soft tissue
structures to tissue or bone and that its fixation devices could be used for a
wider variety of clinical applications, such as repair of tears in the meniscus
cartilage of the knee, or repair of ligament or tendon damage in the fingers or
toes. In addition, the Company will need to demonstrate that its products are
cost-effective and convenient to use and that the techniques for their use are
relatively straightforward and simple. There can be no assurance that the market
for the Company's products will continue to grow or that they will be accepted
for orthopedic procedures not currently using fixation devices and in markets
outside of the sports medicine segment of the orthopedic market.
Limited Product Line. A substantial portion of the Company's sales to date have
derived from the Company's ROC tissue fixation products for use in open shoulder
repair applications and related instruments. As of the date hereof, the use of
the ROC, ROC XS and Mini Roc fasteners have been cleared by the FDA for
applications involving the shoulder, knee, foot, ankle, hand and wrist. The
Company's COR system has also been cleared by the FDA for the grafting of bone
plugs in the knee; however, most of the Company's clinical experience to date
involves shoulder procedures. In addition, while the Company's future prospects
depend in part on the use of its products in arthroscopic and laparascopic
procedures, most of the clinical experience involving the Company's products has
been in open surgery procedures. For the fiscal years ended December 31, 1996
and 1995, the ROC fastener and related instruments accounted for approximately
95.4% and 92.7%, respectively, of the Company's sales. The Company expects that
most of its revenue in the foreseeable future will
2
<PAGE>
continue to be derived from sales of its ROC products. Failure of ROC to
maintain and gain market acceptance would have a material adverse affect on the
Company's business, financial condition and results of operations.
Rapid Technological Change and New Product Innovation. The medical device market
is subject to rapid technological change and new product introductions and
enhancements. The Company's ability to remain competitive in this market will
depend in significant part on its ability to develop and introduce new products
and enhancements on a timely and cost effective basis. The ability of the
Company to develop new and enhanced tissue fixation devices depends on a number
of factors, including product selection, timely and efficient completion of
product design, development of new materials and manufacturing processes, timely
regulatory approval, implementation of manufacturing and assembly processes and
effective sales and marketing and there is no assurance that the Company will be
successful in developing such products. If the Company experiences quality or
reliability problems with new products, reductions in orders, higher
manufacturing costs and additional warranty expenses may result. Because new
product development commitments must be made well in advance of sales, new
product decisions must anticipate both future demand and the availability of
technology to satisfy that demand. In the meantime, competitors may achieve
technological advances which provide a competitive advantage over the Company's
products. In addition, advances or developments in other fixation technologies,
including those relating to bioabsorbable materials or biomaterials, could
render the Company's products obsolete or less desirable. There can be no
assurance that the Company will successfully develop and introduce new products
and enhancements or that such products will achieve market acceptance.
Reliance on Patents and Proprietary Technology. The Company relies on
proprietary technology which it seeks to protect primarily through patents,
trade secrets and proprietary know-how. The Company currently holds eight
patents and has 53 United States and foreign patent applications pending which
cover certain aspects of its technology. With respect to the patent
applications, however, the breadth of the claims that will be covered by the
issued patents cannot be known until they are issued. Moreover, the degree of
protection against competing devices afforded by the Company's patents is
subject to uncertainties. There can be no assurance that others will not be
successful in challenging, invalidating or circumventing the Company's patents
or that the Company's patents and intellectual property rights will confer a
competitive advantage on the Company. In addition, there can be no assurance
that the Company will be able to obtain patents on future products, or that the
Company's products will not infringe the patents and proprietary rights of third
parties. The medical device industry has been characterized by extensive
litigation involving patents and other intellectual property rights, and certain
companies in the medical device industry have employed intellectual property
litigation to gain a competitive advantage. The Company has received a notice
alleging that instruments based on one of its patents may infringe the patent of
a third party. the only products currently manufactured by the Company using the
Company's patent are its knot pusher and laparascopic scissors. The Company may
not be able to successfully defend against a claimed infringement and there can
be no assurance that the Company will not become subject to patent infringement
claims or litigation or interference proceedings. Litigation may be necessary to
enforce patents issued to the Company or to protect its trade secrets and other
intellectual property rights. Any litigation or interference proceedings will
result in substantial expense to the Company and a significant diversion of
effort by its employees, and, if adversely determined to the Company, could
result in significant liabilities to third parties and limitations on the
manufacture, distribution or sale of the Company's products or on the use of
certain technologies in the Company's products.
Future Capital Needs; Uncertainty of Additional Funding. There can be no
assurance that additional equity or debt financing will not be required prior to
the time, if ever, the Company achieves and sustains profitability. The Company
may require additional financing to fund its operations. The Company's future
capital requirements will depend on many factors, including the progress of the
3
<PAGE>
Company's research and development, the scope and results of preclinical studies
and clinical trials, the cost, timing and outcome of regulatory reviews, the
rate of technological advances, the market acceptance of any of the Company's
products, administrative and legal expenses, competitive products, and
manufacturing and marketing arrangements. Any additional equity financing may
result in dilution to the Company's stockholders. There can be no assurance that
funds will be available on favorable terms, if at all. If adequate funds are not
available, the Company may be required to cut back or discontinue one or more of
its product development programs, or obtain funds through strategic alliances
that may require the Company to relinquish rights to certain of its technologies
or products.
Regulatory Risks. The manufacturing, labeling, distribution and marketing of the
Company's products are subject to extensive and rigorous governmental regulation
in the United States and certain other countries where the process of obtaining
and maintaining required regulatory approvals is lengthy, expensive and
uncertain. In order initially to market its products for clinical use in the
United States, the Company must obtain clearance from the FDA either through a
procedure known as 510(k) pre-market notification or must receive approval by a
lengthier and more difficult procedure known as pre-market approval ("PMA").
Although all of the Company's current products have been cleared using the 510
(k) procedure, there can be no assurance that the Company's future products or
modifications to the Company's existing products will be cleared by the FDA
using the 510(k) process rather than the more arduous and lengthy procedures
required for a PMA application, which may include extensive clinical studies,
manufacturing information and review by a panel of experts outside the FDA. For
example, to the Company's knowledge, the closest predicate device for a
collagen-based fastener required PMA approval. If the FDA were to require the
Company to obtain pre-market approval for the sale of its future products using
the PMA process, the time from development to marketing of those products could
be significantly extended, with a concomitant negative impact on the Company's
financial performance. The Company may market its products only for indications
that have been cleared by the FDA. The Company has no control over the use of
its devices by physicians. There can be no assurance that the Company will not
become subject to FDA actions resulting from physician use of its products for
non-approved indications. FDA regulations for the commercial sale of products is
subject to interpretation. Failure to comply with FDA requirements could result
in the FDA's refusal to accept clinical data from the Company or the imposition
of regulatory sanctions. In addition, there can be no assurance that the FDA
will not place significant limitations upon the intended use of the Company's
products as a condition to 510(k) clearance or PMA approval. Failure to receive,
or delays in receipt of, FDA clearances or approvals, including the need for
clinical trials or additional data as a prerequisite to clearance or approval,
or any FDA limitations on the intended use of the Company's products, could have
a material adverse effect on the Company's business, financial condition and
results of operations.
The Company has not obtained regulatory approval in all foreign countries in
which it plans to sell product. Starting in mid-1998, the Company will be
required to obtain "CE" mark certification, which is an international symbol of
quality and compliance with applicable European medical device directives, in
order for it to sell its products in Europe. There can be no assurance that the
Company will be able to obtain the proper certification. If the Company obtains
regulatory approval to sell its products in foreign countries, it would rely on
independent distributors to comply with certain of the foreign regulatory
requirements. The inability or failure of the Company's independent distributors
to comply with applicable regulatory requirements could materially and adversely
affect the Company's business, financial condition and results of operations.
The Company and its contract manufacturers will be required to adhere to "Good
Manufacturing Practices" of the FDA and similar requirements in other countries,
which include testing, control and documentation requirements. Ongoing
compliance with good manufacturing practices ("GMP") and other applicable
regulatory requirements will be monitored through periodic inspections by state
and federal agencies, including the FDA, and by comparable foreign agencies.
Failure to comply with applicable regulatory requirements could result in, among
other things, warning letters, fines,
4
<PAGE>
injunctions, civil penalties, recall or seizure of products, total or partial
suspension of production, refusal of the government to grant clearance or
approval to the marketing of devices, withdrawals of approvals and criminal
prosecution. The restriction, suspension or revocation of regulatory approvals
or any other failure to comply with regulatory requirements could have a
material adverse effect on the Company.
Limited Manufacturing Experience. The Company has been manufacturing and
assembling its ROC suture fastener products since 1994, but has yet to
manufacture the volumes necessary for the Company to achieve profitability.
There can be no assurance that reliable, high-volume manufacturing can be
achieved at a commercially reasonable cost. The Company intends to expand its
manufacturing capabilities to include bioabsorbable products and biomaterials,
and if the Company encounters difficulties in scaling up production of new
products, including problems involving production yields, quality control and
assurance, component supply and shortages of qualified personnel, such problems
could have a material adverse effect on the Company's business, financial
condition and results of operations.
Reliance on Sole or Limited Sources of Supply. The Company's handles and suture
fasteners are manufactured from molded polymers. The Company owns only one set
of molds for each of its products requiring a molding manufacturing process. In
the event that the molds are damaged, approximately 12 to 16 weeks would be
required for the manufacture of new molds. Should the Company's manufacturing
process be disrupted, there can be no assurance that the Company would be able
to meet its commitments to customers. The failure of the Company to meet its
commitments could have a material adverse effect on the Company's business,
financial condition and results of operations.
In addition, certain suppliers may terminate sales of certain materials to
companies that manufacture medical devices in an attempt to limit their
potential product liability exposure. If the polymers which are used to
manufacture the Company's ROC suture fasteners became unavailable, the Company
would be required to identify a new polymer material for the suture fasteners
and certify the quality and suitability of the new material. In additional, a
new 510(k) clearance would have to be obtained to market products manufactured
from the new materials. This process could take a substantial period of time and
there is no assurance that the Company would be able to identify, certify or
obtain clearance for the new polymer-based fasteners. The Company is attempting
to develop new tissue fixation devices from bioabsorbable materials and
biomaterials, particularly collagen. The Company believes that there are only a
few sources of bioabsorbable materials with the ability and expertise to
manufacture bioabsorbable materials for the Company's products. The Company
believes that even fewer sources of supply for collagen materials currently
exist. The Company has entered into a research and development and a
manufacturing and supply agreement with Collagen Corporation in connection with
a program to develop tissue fixation devices from collagen, but there are
provisions in those agreements that would enable either party to terminate the
arrangements in certain circumstances. If the Company were unable to obtain
sources of bioabsorbable materials or biomaterials to produce the next
generation of its products, the Company's future prospects and opportunities
would be substantially reduced, resulting in a material adverse effect on its
business, financial condition and results of operations.
Reliance on International Distributors. The Company has one sales employee
outside the United States. Accordingly, the Company depends primarily on outside
independent sales representatives and distributors for its international sales.
None of the Company's foreign representatives are subject to any long-term
commitments to the Company, and all of them represent a number of manufacturers
and sell a broad range of products in addition to those offered by the Company.
The revenues that
5
<PAGE>
such representatives are likely to receive from the promotion and sale of other
products may be substantially greater than the compensation they may receive
from the sale of the Company's products, and it may be difficult for the Company
to provide incentives to such representatives in order to cause them to devote
substantial attention to marketing and selling the Company's products.
International sales accounted for 26.9% of the Company's revenues in 1996. The
failure of the Company's foreign independent representatives to generate
substantial sales for the Company could have a material adverse effect on the
Company's business, financial condition and results of operations. The loss of
such sales representatives or distributors or the inability of the Company to
develop and maintain an alternative foreign distribution network could have a
material adverse impact on the Company's international sales. The Company will
depend in part on its international sales representatives to obtain needed
regulatory approval for the sale of the Company's products in overseas markets.
The failure of its international sales representatives to obtain or maintain the
necessary approvals could have a material adverse effect on the Company's
business, financial condition and results of operations.
Certain risks are inherent in international operations, including changes in
demand resulting from fluctuations in exchange rates, the risk of government
financed or subsidized competition, changes in trade policies and tariff
regulations. Although the Company's international sales are denominated in
dollars, fluctuations in foreign currencies can impact the prices quoted by the
Company to prospective customers and thereby affect the Company's ability to
obtain orders from foreign customers.
Product Liability Risk. The development, manufacture and sale of medical devices
entail significant risks of product liability claims. There can be no assurance
that the amount of the Company's insurance coverage will be adequate to protect
it from product liability claims, that the Company will be able to obtain
adequate coverage at competitive rates in the future, or that the Company's
product liability experience in the future will enable it to obtain insurance
coverage in the future. Product liability insurance is expensive, and may not be
available on acceptable terms, if at all, in the future. A successful product
liability suit not covered by such insurance would have a material adverse
effect on the Company's business, financial condition and results of operations.
Influence of Collagen Corporation. An important part of the Company's long-term
strategy is to develop and sell products manufactured from collagen. Collagen
Corporation holds approximately 11.6% of the Company's Common Stock. Collagen
Corporation is entitled to designate one member of the Company's Board of
Directors so long as it holds at least five percent of the Company's Common
Stock on a fully-diluted basis and a representative of Collagen Corporation
currently serves on the Board of Directors of the Company. In addition, the
Company and Collagen Corporation are parties to a research and development
agreement, a manufacturing and supply agreement and a distribution agreement
with respect to tissue fixation devices manufactured from collagen-based
materials using Collagen Corporation's proprietary technology. Pursuant to those
agreements, certain of the Company's products under development will be based
upon patents and intellectual property owned by Collagen Corporation.
Accordingly, Collagen Corporation may be able to exercise influence over the
business and financial affairs of the Company. If Collagen Corporation's
licensed technology is invalidated or challenged, the Company's ability to sell
products based on such technology could be severely limited. In the event that
the Company materially breaches any of the terms of its agreements with Collagen
Corporation, Collagen Corporation could terminate the Company's license to
develop, manufacture and sell products using Collagen Corporation's technology,
which could have a material adverse effect on the Company's business, financial
condition and results of operations.
Risk of Intense Competition. The medical device industry is highly competitive
and characterized by innovation and rapid technological change. Among the
Company's principal competitors are Mitek
6
<PAGE>
Surgical Products, Inc., a division of Johnson & Johnson; the Zimmer and
Linvatec divisions of Bristol-Myers Squibb Company; Dyonics, Inc., a subsidiary
of Smith & Nephew, Inc., Arthrotek Inc., a division of Biomet, Inc. and U.S.
Surgical Inc. Each of these competitors has significantly greater financial,
manufacturing, marketing, distribution and technical resources than the Company
and a greater share of the tissue fixation market than the Company. In addition,
a number of smaller companies are entering or have entered the tissue fixation
market. Dyonics, Inc. has already released to the market a number of
bioabsorbable products. In addition, Mitek recently introduced a bioabsorbable
anchor. Many of the Company's competitors have large existing sales
organizations devoted to a wide variety of orthopedic products. These companies
are well capitalized and may be able to withstand price pressures and deep
discounting better than the Company. The Company has a small number of sales
employees and independent sales representatives focused on tissue fixation
devices in the sports medicine market and with relatively little experience
selling the Company's products. There can be no assurance that the Company's
competitors will not succeed in developing technologies and products that are
more effective or less costly than any which have been developed or may be
developed by the Company or that would render the Company's products obsolete or
not competitive.
Price Pressure Resulting From Consolidation of Health Care Industry. The health
care industry is undergoing rapid change and consolidation as health care
systems merge to effect cost savings and operating efficiencies. In addition, a
number of large, national buying consortiums have formed to engage in group
purchasing of medical supplies and services in an effort at cost containment for
member hospital systems and health care providers. These consolidated systems
and large purchasing organizations are likely to apply pressure to manufacturers
and distributors of medical devices to reduce the purchase prices of their
goods. Manufacturers such as the Company may be forced to lower prices in
response to those pressures in order for their products to be approved for
purchase by those organizations, which could have a material adverse effect on
the Company's business, financial condition and results of operations.
Possible Limitations on Third-Party Reimbursement. The Company's products are
generally purchased directly by hospitals and other health care providers, which
in turn bill third-party payors such as Medicare, Medicaid and private insurance
companies. Many of these payors are attempting to control health care costs by
authorizing fewer surgical procedures and by limiting reimbursement for
procedures to fixed amounts. The Company's strategy includes the expansion of
its market by encouraging physicians to use its tissue fixation devices for
procedures that are not routinely performed, or if performed, are performed
without the use of tissue fasteners. Failure by physicians, hospitals and other
users of the Company's products to obtain sufficient reimbursement from
third-party payors for procedures in which the Company's products are used, or
adverse changes in government and private third-party payors' policies toward
reimbursement for such procedures, could have a material adverse effect on the
Company's business, financial condition and results of operations.
7
<PAGE>
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the
Registrant has duly caused this report to be signed on its behalf by the
undersigned thereunto duly authorized.
INNOVASIVE DEVICES, INC,
Date: March 26, 1997 By: /s/ Richard D. Randall
------------ --- ----------------------------
Richard D. Randall
President, Chief Executive Officer
and Director
(Principal Executive Officer)
Date: March 26, 1997 By: /s/ James V. Barrile
------------ --- ----------------------------
James V. Barrile
Executive Vice President of Finance,
Chief Financial Officer and Treasurer
(Principal Financial Officer)
8