UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
[X] Annual Report Pursuant To Section 13 or 15(D) of The Securities Exchange
Act of 1934
For The Fiscal Year Ended December 31, 1997
OR
[ ] Transition Report Pursuant To Section 13 or 15(D) of The Securities
Exchange Act of 1934
For The Transition Period From ___________ to ___________
Commission File Number: 000-22029
SPECIAL METALS CORPORATION
------------------------------------------------------
(exact name of registrant as specified in its charter)
Delaware 25-1445468
- ------------------------------- ---------------------------------
(state or other jurisdiction of (IRS employer identification no.)
incorporation or organization)
4317 Middle Settlement Road, New Hartford, New York 13413
---------------------------------------------------------
(address of principal executive offices)
(315) 798-2900
---------------------------------------------------
(registrant's telephone number including area code)
Securities registered pursuant to Section 12(b) of the Act: None
Securities registered pursuant to Section 12(g) of the Act: Common stock,
$0.01 par value per
share
Indicate by check mark whether the registrant (1) has filed all reports required
to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during
the preceding 12 months (or for such shorter period the registrant was required
to file such reports), and (2) has been subject to such filing requirements for
the past 90 days.
Yes [X] No [ ]
Indicate by check mark if disclosure of delinquent filers pursuant to item 405
of Regulation S-K is not contained herein, and will not be contained, to the
best of registrant's knowledge, in definitive proxy or information statements
incorporated by reference in Part III of this Form 10-K or any amendment to this
Form 10-K.
[X]
At March 9, 1998, the aggregate market value of the publicly traded voting stock
held by non-affiliates of the Registrant was $63,525,000 based upon the closing
price of the Registrant's common stock on that date as reported by the Nasdaq
National Market. Solely for the purposes of this calculation all persons who are
or may be officers or directors of the Registrant and all persons or groups that
have filed Schedules 13D and 13G with respect to the Registrant's stock have
been deemed to be affiliates. At March 9, 1998, the Registrant had 15,479,000
shares of common stock outstanding.
Documents Incorporated By Reference:
Portions of the proxy statement for the 1998 annual shareholders meeting are
incorporated by reference into Part III of this report.
<PAGE>
Special Metals Corporation
Form 10-K
Table Of Contents
Item Page
- ---- ----
Part I
1 Business........................................................ 1
2 Properties...................................................... 6
3 Legal Proceedings............................................... 6
4 Submission of Matters to a Vote of Security Holders............. 10
Part II
5 Market for the Registrant's Common Equity and Related
Stockholder Matters............................................. 11
6 Selected Financial Data......................................... 12
7 Management's Discussion and Analysis of Financial Condition
and Results of Operations....................................... 13
8 Financial Statements and Supplementary Data..................... 20
9 Changes In and Disagreements with Accountants on Accounting
and Financial Disclosure........................................ 49
Part III
10 Directors and Executive Officers of the Registrant.............. 50
11 Executive Compensation.......................................... 50
12 Security Ownership of Certain Beneficial Owners and
Management...................................................... 50
13 Certain Relationships and Related Transactions.................. 50
Part IV
14 Exhibits, Financial Statement Schedules, and Reports on
Form 8-K........................................................ 51
Signatures...................................................... 53
<PAGE>
PART I
Item 1 - Business
General
Special Metals Corporation (the "Company" or "Special Metals") is one
of the world's leading producers of superalloys and special alloy long products.
Superalloys are highly engineered metal alloys designed to withstand extreme
heat and stress and are principally used in the manufacture of jet engine parts.
Special alloys have unique physical, chemical and/or mechanical properties which
are optimized by the Company's melting and processing capabilities.
Special Metals operates three divisions. The superalloy Billet and Bar
Division manufactures a wide array of wrought superalloy and special alloy
products in billet, bar and cast forms, which are used primarily in jet engines.
This division also produces shape memory alloys, such as Nitinol, which are
primarily used in medical and dental applications. The Powder Division produces
powder metallurgy superalloy products for military jet engines and the latest
generation of large commercial jet engines and is the world's largest
independent manufacturer of superalloy powder products. The Dental Division is
the leading North American producer of amalgamable dental alloys. In 1997 the
superalloy Billet and Bar Division, the Powder Division and the Dental Division
accounted for 89%, 8% and 3%, respectively, of the Company's net sales.
Industry Overview
Superalloys are primarily nickel-based alloys containing varying
amounts of other elements, such as chromium, cobalt, columbium, molybdenum,
titanium, and aluminum. Superalloys were originally developed to meet the highly
demanding design requirements of jet engines and are currently used to make jet
engine components such as turbine blades, vanes, disks, rings, seals and shafts.
These applications require very high strength, toughness and resistance to metal
fatigue and creep while operating in environments where temperatures can
sometimes exceed 2,200(degree)F. Superalloys are also used in other technically
demanding applications such as land-based power generating equipment, oil well
drilling hardware, die materials, chemical processing applications and metal
molding machines.
The aerospace industry has historically been characterized by severe
cyclicality which has had a significant impact on the sales and profitability of
superalloy producers, including Special Metals. The superalloy industry reached
a cyclical and historical peak in 1990 and subsequently declined to a cyclical
bottom in 1993. In 1995, the commercial aircraft industry began recovering from
the recession of the early 1990's. Rollouts of large commercial aircraft have
increased by more than 47% from 1995 to 1997. Boeing's production rate has
increased from 18 aircraft per month in early 1996 to over 40 aircraft per month
by the end of 1997. The Company believes the demand of commercial aircraft and
the jet engines to power them will remain strong through 1999 or beyond because
of projected increases in revenue passenger miles and the imposition of federal
Stage 3 noise regulations which require airlines to replace existing Stage 2
engines or retrofit such engines with hush kits. The superalloy industry is also
benefiting from a significant increase in demand for jet engine spare parts.
Based on current market conditions, the Company believes that this increase in
activity should continue into the next decade. Recent developments in Asian
economies have not had an impact on the Company to date; however, continued
instability in this region could have a negative impact on the aerospace
industry and the Company in the future.
- 1 -
<PAGE>
Business Strategy
The Company's primary objective is to continue the growth of its
superalloy and special alloy business and to focus on both the aerospace and
non-aerospace markets. To achieve its objectives, the Company has implemented a
business strategy designed to accomplish the following:
1) Capitalize on leading position in the aerospace market. To meet
growing aerospace demand for products, the Company has expanded
production capacity and reaffirmed its commitment for capital
improvements.
2) Continue to invest in the business. Capital expenditures in 1997
totaled $9.9 million. During 1998 through 2001, the Company plans
to invest up to $54 million in capital expenditures to expand and
modernize its melting, forging and finishing equipment, install a
state-of-the-art information system and make other investments to
maintain its position as a technical leader.
3) Explore potential acquisitions. The Company expects to evaluate
from time to time potential acquisitions. Potential acquisitions
may include investments in companies, technologies or products
that complement the Company's business or products.
4) Develop new products and markets. The Company plans to grow its
business through the development of new products and new
applications and markets for its existing products.
5) Continue to reduce cycle times and costs. In recent years, the
Company has significantly reduced cycle time and improved
inventory turnover, and has also undertaken numerous projects to
maintain and improve its efficiency and cost position. The Company
continues to pursue opportunities to further improve efficiency
and reduce costs.
Products and Markets
The Company's products include superalloy ingots and wrought products
such as billets and bars manufactured by the superalloy Billet and Bar Division.
These products are sold to forgers, machine shops, fabricators and independent
distributors, which use these products primarily in the manufacture of jet
engine parts and other critical applications. The Superalloy Billet and Bar
Division also produces advanced specialty materials including shape memory
alloys such as Nitinol. The Powder Division produces powder metallurgy
superalloy products in the form of loose powder, billet and bar. The Dental
Division produces amalgamable silver-based dental alloys.
Wrought Products
Wrought products are produced by taking ingots manufactured at the
Company's New Hartford, New York facility and forging them at the Company's
Dunkirk, New York facility to a smaller diameter. The forging process involves
heating an ingot to a precisely controlled high temperature and reducing its
diameter on a large forging press, thereby producing a billet. The reduction of
an ingot into a billet refines the grain structure of the ingot into a fine
uniform structure that is both tough and ductile. Jet engine disks, rings,
spacers, shafts and casings are forged from billet. The billet may be further
processed into a bar by rolling the billet to a smaller cross section on either
of two rolling mills. The rolling process involves heating the billet to a
precisely controlled temperature and then reducing its diameter by passing it
back and forth between shaped rolls. The rolling process reduces the diameter,
lengthens the product, and refines the grain structure further. Bars are sold to
machine shops, forgers and distributors. During 1995, 1996 and 1997, 61%, 73%
and 79%, respectively, of the Company's net sales were derived from wrought
product sales.
- 2 -
<PAGE>
Powder
In the most advanced jet engines, the requirements for strength, high
temperature corrosion resistance and toughness exceed the capabilities of
conventional cast/wrought superalloys. For these applications, alloys have been
developed that cannot be processed using normal ingot metallurgy. Instead,
powder metallurgical techniques are needed to produce the product. Powder
metallurgy superalloys are produced at the Company's Princeton, KY facility and
sold as loose powder or in billet form. During 1995, 1996 and 1997, 10%, 10% and
8%, respectively, of the Company's net sales were derived from powder products.
Dental Products
The Dental Division designs, manufactures and markets silver-based
amalgamable alloys used principally for tooth fillings. The products are in the
form of very fine powder produced by melting, alloying and atomizing alloys of
silver, copper, tin, palladium and other elements. A number of the Dental
Division's products are covered by patents extending to 2000 and beyond. During
1995, 1996 and 1997, 5%, 4% and 3%, respectively, of the Company's net sales
were derived from dental products.
Nitinol
Nitinol wire represents a group of titanium/nickel alloys that have
unique memory and flexibility properties. Shape memory alloys can be formed into
a product, bent or twisted into a different shape, and then be easily returned
to their original shape. Nitinol's major uses are in medical applications such
as orthodontic wire, stents, catheter guide wires and eye glass frames and
industrial applications such as temperature control devices and clamping
devices.
Raw Materials
The major raw materials used in the manufacture of superalloys and
special alloys are scrap and various virgin materials such as nickel, chromium,
cobalt, columbium, molybdenum, titanium and aluminum. Over half the raw
materials consumed in superalloy production is scrap, either internally
generated scrap from the Company's own production process, or superalloy scrap
purchased on the open market or from customers. Although there can be no
assurances, the Company believes that a number of suppliers can produce
sufficient quantities of either scrap or virgin raw materials and that it is not
dependent on any one supplier for any of the raw materials used to manufacture
its products.
Commercial deposits of certain raw materials used by the Company are
found in only a few parts of the world. The availability and prices of these
materials may be influenced by cartels, changes in world politics, unstable
governments in exporting nations and inflation. Shortages of, and price
increases for, certain raw materials used by the Company have occurred in the
past and may occur in the future, which could have an adverse effect on the
Company.
Pricing
Pricing of superalloys can be volatile and often moves in concert with
key raw materials, such as nickel and cobalt. Sale of the Company's products are
made under conventional purchase orders, one year supply contracts and long term
firm price or index price contracts. Firm price contracts will continue to be a
significant part of the superalloy industry because the end users of superalloy
products,
- 3 -
<PAGE>
primarily jet engine manufacturers need to be able to quote firm prices to the
airlines for engines to be delivered several years in the future. The Company
will continue attempts to minimize raw material price risks in connection with
firm price contracts by hedging prices of certain raw materials, purchasing raw
materials under fixed price arrangements and entering into scrap purchase
arrangements with customers.
Marketing and Distribution
The Company has a 17 person sales department consisting of an outside
sales force and inside sales personnel. In certain foreign markets, the Company
relies on agents to sell its products.
The Company has historically made products to specific customer orders
and has sold directly to the customer. However, the Company also sells
superalloy product through a warehouse facility in Oceanside, CA., and through
distributors.
The Company estimates that its sales to the aerospace industry totaled
approximately 70%, 77% and 81% in 1995, 1996 and 1997, respectively. Sales to
non-aerospace industries have continued at a strong pace but have not kept up
with the surge in aerospace activity.
The Powder Division sells its products to several customers, but is
substantially dependent on its three largest customers, which represented
approximately 91% of the division's net sales. The majority of the division's
sales result from long term supply arrangements with aircraft engine
manufacturers and their suppliers.
The Dental Division supplies powder alloys to approximately 9 of the
leading dental supply firms. The supply firms package and market them to dental
supply houses under well established trade names.
Competition
The superalloy industry is highly competitive. The market for
superalloys is global and is dominated by a few major producers, including
Carpenter Corporation and Allegheny Teledyne Incorporated. The Company competes
primarily on the basis of ability to meet customers' product specifications,
quality, price and delivery schedules. Many of the Company's competitors are
subsidiaries or divisions of large, diversified metals companies which may have
substantially greater capital resources, and, in some cases, lower energy or
labor costs than the Company.
Special Metals is primarily dedicated to the superalloy and special
alloy business. Special Metals' derives over 81% of its revenues from the
production of wrought and powder superalloys sold to the jet engine market.
Other large producers of superalloys are divisions of large stainless steel
companies or specialty steel companies who also make superalloys as part of a
larger array of product lines. Although these companies have greater financial
resources than the Company, the Company believes that its primary focus on the
superalloy industry provides it with a competitive advantage. However, because
of its greater exposure to the superalloy business, the Company will be more
adversely affected than its competitors in a downturn in the superalloy
business.
- 4 -
<PAGE>
Research and Development
The goal of the Company's research and development operations is to
reduce the cost of producing its core business products, develop and improve
proprietary alloys and processes, and apply its technology to the manufacture of
specialty alloys and materials for new non-aerospace markets. The Company's
research, technical, development and metallurgical production efforts are
staffed by approximately 25 individuals with engineering and sciences degrees.
The Company conducts research activities at its New Hartford, Princeton and Ann
Arbor facilities. The New Hartford research facility includes laboratories for
physical and mechanical metallurgical analysis and a stand-alone process
laboratory for the small scale processing of vacuum melted alloys which is used
for internally supported development efforts and external sales of developmental
materials and specialty alloys, including the Company's shape memory alloys,
such as Nitinol. The research and development staff works closely with the
Company's production staff and sales force to improve existing products and
processes.
In addition, the Company is presently an active participant in the
Specialty Metals Processing Consortium ("SMPC") whose membership includes other
superalloy producers. SMPC's purpose is to pursue melting and solidification
technology and to better understand the very complex nature of alloy melting and
solidification. SMPC's research is conducted at the Sandia National Laboratory
and also includes industrial experiments conducted at the member companies.
Funding for the consortium is made up of membership fees and matching monies
from the U.S. Department of Energy and other sources.
Non-aerospace special alloys under development include products in the
Company's shape memory alloy product line. These products, such as Nitinol,
utilize precise alloy chemistries and thermomechanical processing and are being
designed for use in medical, dental and consumer products. Other non-aerospace
products under development include proprietary dental alloys, such as a recently
patented restoration alloy system that offers a unique combination of properties
and handling characteristics during application.
The Company spent $1.3 million, $1.6 million and $1.9 million during
1995, 1996 and 1997, respectively, for research and development activities.
Customer Concentration
There are a small number of large consumers of superalloy long product
in the world, and Special Metals believes it enjoys good relations with all of
them. A substantial portion of the Company's business is conducted with a
relatively small number of large customers. The Company's top ten customers
accounted for 70% of the Company's net sales in 1997. In 1997, each of
Wyman-Gordon Forgings Inc., Ladish Company and Societe Nationale d'Etude de
Construction de Moteurs d'Aviation accounted for approximately 21%, 11% and 10%,
respectively, of the Company's net sales. In 1996, the Company's three largest
customers accounted for approximately 18%, 13% and 11%, respectively, of the
Company's net sales. In 1995, the Company's three largest customers accounted
for approximately 17%, 11% and 10%, respectively, of the Company's net sales.
Employees
As of December 31, 1997, the Company employed approximately 654
persons. Of these, approximately 456 (or 70%) work under four collective
bargaining agreements. During 1997, the Company and the hourly workers at its
New Hartford, New York facility reached agreement on a new five-year collective
bargaining agreement. This agreement covers 331 production and maintenance
- 5 -
<PAGE>
workers represented by the local branch of the International Association of
Machinists and Aerospace Workers ("IAM") and expires in August 2003. Also during
1997, the Company and the hourly workers at its Princeton, Kentucky site reached
agreement on a new three-year collective bargaining agreement. This agreement
covers 59 production and maintenance workers represented by the local branch of
the IAM and expires in August 2000. The remaining labor agreements expire in
1999.
Item 2 - Properties
The Company's principal manufacturing facility and corporate offices
are located in New Hartford, NY. The following table sets forth information
regarding the Company's manufacturing facilities.
Approximate Nature of
Location Square Footage Occupancy Primary Use
- --------------------------------------------------------------------------------
New Hartford, NY 358,000 Leased Melting & Finishing Plant
Dunkirk, NY 98,000 Leased Forging Plant
Princeton, KY 70,000 Leased Powder Metallurgy Plant
Ann Arbor, MI 9,000 Owned Dental Alloy Plant
The facilities in New Hartford, Dunkirk and Princeton are leased from
government agencies under arrangements in which it pays rent in lieu of taxes
and has options to purchase such facilities at a nominal purchase price. These
arrangements for the New Hartford, Dunkirk and Princeton facilities expire in
2007, 2001 and 2000, respectively. The Princeton facility lease is subject to
extensions for an additional 15 years beyond the current term.
The Company has undertaken an aggressive capital expenditure program
and is in the process of installing two new vacuum arc remelting furnaces and
one new electroslag remelting furnace at its facility in New Hartford. In
addition, the Company installed a new power, pumping and control system on its
20 ton vacuum induction melting furnace and, beginning in 1998, will expand its
New Hartford facility with the addition of a new 20,000 square foot building.
See "Management's Discussion and Analysis of Financial Condition and Results of
Operations - Liquidity and Capital Resources."
Item 3 - Legal Proceedings
Environmental Matters
The Company's facilities are engaged in activities regulated by
extensive federal, state, local and foreign environmental and worker safety and
health laws and regulations, including those relating to air emissions,
wastewater discharges, the handling and disposal of solid and hazardous wastes
and the remediation of contamination caused by the release of hazardous
substances in the past. In the U.S., such laws include the Federal Clean Air
Act, the Clean Water Act, the Resource Conservation and Recovery Act ("RCRA"),
the Comprehensive Environmental Response, Compensation and Liability Act
("CERCLA"), and analogous state laws. The Company uses substantial quantities of
substances that are considered hazardous or toxic under federal, state and/or
local environmental, worker safety and health laws and regulations. The
Company's operations pose a continuing risk of accidental releases of, and
worker exposure to, hazardous or toxic substances. There is also a risk that
government environmental requirements, or enforcement thereof, may become more
stringent in the future and that the Company may be subject to legal proceedings
brought by private parties or government agencies with respect to environmental
matters. Although the Company believes that it is in substantial compliance with
applicable requirements of environmental laws, there can be no assurance that
some, or all, of the risks discussed under this heading will not result in
liabilities that are material to the Company's business, results of operations,
financial condition or cash flows.
- 6 -
<PAGE>
The Company's facilities have been used for industrial purposes for a
substantial period and, over such time, these facilities have used substances or
generated and disposed of wastes which are hazardous. For example, the Company
used substantial quantities of polychlorinated biphenyls ("PCBs") at its New
Hartford facility through the 1970s. Sites at which the Company's wastes have
been allegedly released or otherwise come to be located, and for which the
Company currently faces potentially material environmental remediation
liabilities, are described below. At December 31, 1997, the Company had total
reserves of approximately $4.0 million to cover future costs arising from known
environmental liabilities for remediation and operation and maintenance of
remediation systems, including costs relating to its own properties and certain
sites at which the Company's wastes have allegedly been identified. The
Company's actual future expenditures, however, for remediation of environmental
conditions existing at its properties and at these other locations cannot be
conclusively determined at this time. Furthermore, additional locations at which
wastes generated by the Company may have been released or disposed, and of which
the Company is currently unaware, may in the future become the subject of
remediation for which the Company may be liable, in whole or in part.
Accordingly, it is possible that the Company could become subject to
environmental liabilities in the future that could result in a material adverse
effect on the Company's business, results of operations, financial condition or
cash flows.
The Company's policy is to continually strive to improve environmental
performance. From time to time, the Company may be subject to environmental
regulatory enforcement under various statutes, resolution of which typically
involves the establishment of compliance programs and may involve the payment of
penalties, but to date no material penalties have been incurred. The Company
incurred average annual capital expenditures for environmental protection and
compliance of less than $220,000 for 1995, 1996 and 1997 and its capital budget
provides for less than $110,000 for such expenditures in 1998. The Company does
not expect the future recurring operation costs of compliance with currently
enacted environmental laws and adopted or proposed regulations to have a
material impact on its liquidity and capital resources. However, the imposition
or more strict standards or requirements under environmental laws and the
possibility of increased enforcement could result in expenditures in excess of
amounts estimated to be required for such matters.
The Company is currently involved in the following potentially material
environmental matters or proceedings:
Clayville, New York. The State of New York identified the Company as a
potentially responsible part ("PRP") under CERCLA for the release or threatened
release of hazardous substances at Ludlow Landfill, Clayville, New York due to
the Company's generation of certain industrial wastes, including PCB wastes,
believed to have been disposed at the landfill (the "Site"). CERCLA imposes
strict, joint and several liability for investigatory and clean-up costs. The
State of New York brought a federal action against Ludlow Sand and Gravel
Company, Ludlow Sanitary Landfill, Inc., James Ludlow and Kevin Ludlow
(collectively, "Ludlow") under CERCLA, common law nuisance and state statutory
law, seeking the recovery of its response costs, damages to natural resources,
closure of the landfill and penalties. Ludlow, in turn, brought a third-party
action for indemnification and/or contribution against the Company and four
other generators of wastes allegedly sent to the Site.
A consent judgment was entered, resolving the litigation with respect
to the Company. Under the terms of the consent judgment, claims against Ludlow,
the Company and Chesebrough Pond's (the "Settling Defendants") are settled and
the Site is required to be closed and remediated pursuant to an approved
remedial plan (the "ARP") as defined in the consent judgment. The Company is
obligated under the consent judgment to pay all remediation costs required to
implement the ARP in excess of the funds in a trust account established by the
Consent Judgment. The trust account has received monies paid by the Settling
Defendants as well as a specified percentage of the settlement funds obtained to
date from a contribution action brought by the Company and Chesebrough-Pond's
against non-settling users of the landfill. The trust account
- 7 -
<PAGE>
currently has a balance of approximately $85,000.
The Company has completed the ARP with respect to the main body of the
Site. However, completion of the remedy in one area (the "North Gravel Pit") was
delayed because of PCB contamination discovered in the course of excavation in
that area. A work plan designed to determine the extent of contamination in the
North Gravel Pit and select an appropriate remedial alternative has been
approved by the New York State Department of Environmental Conservation ("DEC")
and the Company conducted the investigation during the period from November 1996
through January 1998. A report detailing the work and a recommended remedial
alternative was prepared by the Company's engineers and submitted to the DEC on
or around the end of January 1998. The recommended remedial alternative has a
total estimated capital cost for the remedy of approximately $910,000 with a
total estimated annual operation and maintenance cost of approximately $39,000.
The estimated 30 year present value for operation and maintenance costs is
approximately $600,000. The engineers' cost estimates are, however, preliminary
and, accordingly, may be subject to material adjustment during the period of
remedial design. It is not known at this time whether the DEC will accept the
recommended remedial alternative. It is therefore possible that liabilities in
respect of this site could have a material adverse effect on the Company's
business, results of operations, financial condition and cash flow. The Company
has provided for the recommended remedial alternative in its financial
statements.
The Company is attending to and will be responsible for the cost of
post-closure operation and maintenance ("O&M") at the Site for a period of
thirty (30) years from 1997 and part of the required O&M activities will include
groundwater monitoring. These costs are estimated for the main body of the site
to be approximately $150,000 per year in years one and two and approximately
$90,000 per year in years three through 30 for a total of $2.8 million. The
Company has established a reserve of $1.8 million in respect of these expenses
based upon the present value of these expenses using a discount rate of 4%. In
addition, there are contingent post-closure activities. It cannot be determined
which, if any, of the contingent activities the Company will need to perform.
Universal Waste Site. In the mid 1980's the owner/s/operators of
Universal Waste in Utica, New York (the "Universal Waste Site") were cited by
the DEC in a formal enforcement proceeding for cleanup of the site which was
allegedly contaminated with PCBs and trichlorethylene. The owner of the
Universal Wastes Site requested by motion that the Company be named as an
indispensable party to that proceeding. The DEC, however, took the position that
the Company should not be named as an indispensable party. The Company believes
that at least four other potentially responsible parties have been identified
with respect to the contamination at the site. A consent order has been executed
obligating the site operator to conduct a preliminary site assessment on a
portion of the property. The preliminary site assessment is underway. The DEC is
also conducting a separate preliminary site assessment. The Company is presently
not involved in investigating the alleged contamination.
Based upon the limited information available to its environmental
engineers, the Company has established a reserve of $575,000. However, because
of the preliminary nature of the investigation, it is not possible, at this
time, to provide a reasonable estimate as to the ultimate cost of any
investigative or remedial work which will be required, or the Company's share,
in any, of such costs. Therefore, it is possible that liabilities could arise in
respect of this site that could have a material adverse effect on the Company's
business, results of operations, financial condition and cash flows.
Quanta Resources Site. In August 1990, the Company received
notification from the United States Environmental Protection Agency (the "EPA")
that it is considered a potentially responsible party under CERCLA at a site in
Syracuse, New York (the "Quanta Resources Site"). The Company, together with
approximately 20 other potentially responsible parties, formalized an agreement
by which it paid the sum of $27,500 towards contribution for removal costs of
the EPA associated with waste material at the site. The
- 8 -
<PAGE>
total sum collected (approximately $1 million) was paid directly to the EPA. In
September 1996, the Company received notification from the EPA asking the
Company to attend another meeting with respect to the site. The EPA requested
approximately $200,000 to investigate further removal and cleanup actions. The
Company, together with approximately 60 other potentially responsible parties,
formalized an agreement by which it paid the sum of $5,000 towards the
investigation. The investigation is to be managed by the potentially responsible
parties. In 1997 the Company, together with approximately 60 other potentially
responsible parties, entered into an Administrative Order on Consent with the
New York State Department of Environmental Conservation to pay the Department
for the Department's response costs. The Company's share was $1,500. The extent
of additional regulatory action which may be required at the site is unclear. It
is not possible, at this time, to provide a reasonable estimate as to the cost
of any further investigative or remedial work which will be required or the
Company's share, if any, of such costs. Therefore, it is possible that
liabilities could arise in respect of this site that could have a material
effect on the Company's business, results of operations, financial condition and
cash flows.
Al-Tech Site. Al-Tech Specialty Steel Corporation ("Al-Tech") occupies
a parcel of realty adjacent to the Company's Dunkirk, New York, facility. In
1998, Al-Tech advised the Company that a cooling pond located on its property
was contaminated with PCBs. At the time, the Company utilized the pond as a
source of non-contact cooling water. The Company conducted a PCB investigation
(including sampling) of its facilities. The Company's investigation did not
indicate any connection between contamination in the pond and the Company's
operations. An edition of an Al-Tech newsletter indicated that Al-Tech has
retained a consultant to conduct a RCRA Facility Investigation ("RFI") at its
facility in Dunkirk, New York to determine whether or not chemical constituents,
from past and present activities at the site, have impacted the environment. The
Company has no other information on which to estimate reasonably the cost of
further investigative or remedial work at the Al-Tech site, or the Company's
share if any, of such costs. Depending on the development of any information
connecting the Company to this site, it is possible that liabilities could arise
in respect of this site that could have a material adverse effect on the
Company's business, results of operations, financial condition and cash flows.
New Hartford Site. In 1986, the DEC approved the Company's plan for the
closure of a waste impoundment containing spent acid waste at its New Hartford
facility. The impoundment is now maintained pursuant to the RCRA Corrective
Action Program. In September 1993 the Company submitted a Voluntary RCRA
Facility Investigation Report to the DEC to monitor ground water for metals in
the area of the Company's waste impoundment. Based on test results from the
spring of 1994 to the spring of 1997, it appears that further remediation may
not be necessary, and the Company does not believe that it will incur any
material liability in connection with this matter. The Company will continue to
perform groundwater monitoring at the site pursuant to the RCRA Corrective
Action Program. Depending on the results, it is possible that further
investigative or remedial activity could be required of this matter and that the
liabilities in respect thereof could have a material effect on the Company's
business, results of operations, financial condition and cash flows.
New Hartford SPDES Permit Issue. One outfall out of four permitted
under the Company's State Pollution Discharge Elimination System permit at its
New Hartford facility is occasionally out of compliance with respect to PCB
limits. The current limit for PCBs in the Company's permit is non-detect. The
DEC has notified the Company that sampling aquatic organisms downstream from the
Company's outfall revealed higher than acceptable levels of PCBs. The Company
has offered to install additional storm water treatment equipment at an
estimated cost of $160,000 in order to meet the non-detect limit. The DEC has
not approved the Company's proposal and may be looking for a higher capacity
system estimated to cost approximately $315,000. Although the Company cannot at
this time provide a reasonable estimate of any additional costs that may be
required, the Company does not believe it will incur any material liability in
connection with this matter.
- 9 -
<PAGE>
New Hartford Facility. During the course of a recent excavation within
the plant at New Hartford, New York to install new equipment, the Company
discovered an area of soils contaminated with PCBs. The area of contamination
was defined in accordance with instructions from regulatory officials. The
Company has incurred $225,000 to date relating to the disposal of soil and other
related clean-up activities. It is likely that regulatory authorities will
require additional soil and ground water monitoring relating to PCBs at the New
Hartford Facility. It is not possible to predict whether additional PCB
contamination will be discovered or whether additional remediation will be
required. The Company has not established any reserves for potential future
costs related to this issue. Therefore, it is possible that liabilities could
arise in respect of this matter that could have a material adverse effect on the
Company's business, results of operations, financial condition and cash flows.
Other Matters. The Company is on notice of, and involved in, certain
other environmental matters which have been settled or are at various stages of
discussion, negotiation or settlement which the Company does not believe to be
material.
Other Matters
From time to time, the Company is involved in legal proceedings
relating to claims arising out of its operations in the normal course of
business. The Company does not believe that it is a party to any proceedings at
the present time that could have a material adverse effect on the business,
financial condition, results of operations or cash flows of the Company.
Item 4 - Submission of Matters to a Vote of Security Holders
None
- 10 -
<PAGE>
PART II
Item 5 - Market for Registrant's Common Stock and Related Stockholder Matters
The Company's common stock is traded on the NASDAQ National Market
under the symbol "SMCX." As of March 9, 1998, there were approximately 60
shareholders of record (including holders who are nominees for an undetermined
number of beneficial owners) of the Company's common stock. The quarterly common
stock price ranges since the Company's initial public offering in February 1997
are as follows:
High Low
---- ---
Quarter ended:
- --------------
March 31, 1997 $ 18.00 $ 14.75
June 30, 1997 20.00 13.38
September 30, 1997 19.75 17.38
December 31, 1997 23.13 16.75
The Company has not paid dividends on its common stock during 1997 or 1996 and
does not currently pay dividends on its common stock. Any future decisions as to
the payment of dividends will be at the discretion of the Company's Board of
Directors, subject to applicable law. The Company's ability to pay dividends is
also subject to the covenants contained in its credit agreements. See
"Management's Discussion and Analysis of Financial Condition and Results of
Operations."
- 11 -
<PAGE>
Item 6 - Selected Financial Data
The following table sets forth selected historical financial data of the
Company as of, and for the years ended December 31, 1993, 1994, 1995, 1996 and
1997. The financial data set forth below should be read in conjunction with the
information under 'Management's Discussion and Analysis of Financial Condition
and Results of Operations' and the Financial Statements of the Company and the
notes thereto included in Item 8 of this Form 10-K.
<TABLE>
<CAPTION>
Year Ended December 31
1993 1994 1995 1996 1997
--------- --------- --------- --------- ---------
(in thousands, except per share data)
STATEMENT OF OPERATIONS DATA:
<S> <C> <C> <C> <C> <C>
Net sales $ 80,412 $ 95,510 $ 132,245 $ 162,300 $ 186,071
Cost of goods sold 84,304 93,625 114,752 133,828 142,029
--------- --------- --------- --------- ---------
Gross profit (loss) (3,892) 1,885 17,493 28,472 44,042
Selling, general and administrative
expenses 4,141 4,313 5,207 5,408 6,958
--------- --------- --------- --------- ---------
Operating income (loss) (8,033) (2,428) 12,286 23,064 37,084
Other (income) expense 3,912 4,361 4,727 4,079 563
--------- --------- --------- --------- ---------
Income (loss) before income taxes (11,945) (6,789) 7,559 18,985 36,521
Income tax expense (benefit) (1) 197 99 354 (96) 13,519
Net income (loss) $ (12,142) $ (6,888) $ 7,205 $ 19,081 $ 23,002
========= ========= ========= ========= =========
Net income (loss) per share $ (.98) $ (.56) $ .58 $ 1.54 $ 1.53
========= ========= ========= ========= =========
Weighted average shares outstanding 12,400 12,400 12,400 12,400 15,004
Weighted average shares outstanding
assuming dilution 12,400 12,400 12,400 12,400 15,016
BALANCE SHEET DATA (AT PERIOD END):
Working capital $ 32,378 $ 29,287 $ 35,779 $ 47,450 $ 68,825
Total assets 98,779 91,901 106,945 116,492 141,750
Current portion of long-term debt and
capital lease obligations 3,210 4,233 5,270 4,296 316
Long-term debt (excluding current 47,500 45,500 40,810 42,010 --
maturities)
Long-term capital lease obligations
(excluding current maturities) 1,174 965 777 512 174
Subordinated notes payable to affiliates 8,500 8,500 8,500 1,500 --
Stockholders' equity 16,074 8,987 15,666 34,775 103,971
</TABLE>
- -----------------------
(1) Income tax expense for 1995 and 1996 differs from the amount which is
derived by applying the combined statutory income tax rates due to the
utilization of previously unrecognized net operating loss and other tax
carryforwards in 1995 and 1996 and the recognition of previously
unrecognized deferred income tax assets in 1996.
- 12 -
<PAGE>
Item 7 - Management's Discussion and Analysis of Financial Condition and Results
of Operations
Forward Looking Statements
Statements included in this Management Discussion and Analysis of Financial
Condition and Results of Operations and elsewhere in this document that do not
relate to present or historical conditions are "forward looking statements"
within the meaning of that term in Section 27A of the Securities Act of 1933, as
amended, and in Section 21F of the Securities Exchange Act of 1934, as amended.
Additional oral or written statements may be made by the Company from time to
time, and such statements may be included in documents filed with the Securities
and Exchange Commission. Such forward-looking statements involve known and
unknown risks, uncertainties and other factors, which may cause the actual
results, performance or achievements of the Company to be materially different
from those expressed or implied by such forward- looking statements. Such
factors include economic slowdowns and recessions (especially in the aerospace
industry, in which most of the Company's customers are concentrated); the
availability and pricing of raw materials used in the manufacture of the
Company's products; the reliable operation of the Company's manufacturing
facilities and equipment; the Company's ability to evaluate, finance and
integrate acquired businesses, products and companies into the Company's
existing business and operations; the Company's ability to effectively compete
in the industries in which it does business; the Company's ability to
successfully negotiate new labor agreements and otherwise maintain favorable
relations with its employees, a majority of whom are unionized; the Company's
ability to comply with existing and future environmental laws and regulations,
the accuracy of its current estimates of existing environmental liabilities and
the possibility that currently unknown environmental liabilities may be
discovered.
Overview
The Company manufactures superalloys and special alloys, which are
highly engineered metal alloys designed to withstand extreme heat, stress and
corrosion. Special Metals operates three divisions. The Superalloy Billet and
Bar Division manufactures a wide array of wrought superalloy and special alloy
products in billet, bar and cast form, which are used primarily in jet engines.
This division also produces "shape memory" alloys, such as Nitinol, which are
primarily used in medical and dental applications. The Powder Division produces
powder metallurgy superalloy products for military jet engines and the latest
generation of large commercial jet engines and is the world's largest
independent manufacturer of superalloy powder products. The Dental Division is
the leading North American producer of amalgamable dental alloys. In 1996, the
Superalloy Billet and Bar Division, the Powder Division and the Dental Division
accounted for 89%, 8% and 3%, respectively, of the Company's net sales of $186.1
million.
Net Sales. Net sales include sales of the Company's superalloy and
special alloy products and revenue earned from toll conversion. Sales of the
Company's products are made under conventional purchase orders, one-year supply
contracts, long-term firm price contracts and indexed price contracts. Long-term
firm price and indexed price contracts have become more prevalent in the
superalloy industry because jet engine manufacturers are required to provide
firm price quotations to airlines for jet engines to be delivered several years
in the future. Approximately 2% of the pounds shipped of the Company's wrought
products in 1997 were sold under long-term firm price contracts negotiated in
1993. Because of the adverse business conditions prevailing when the long-term
firm price contracts were negotiated in 1993, the pricing on these contracts was
unfavorable for superalloy producers and resulted in severely depressed margins
in the superalloy industry from 1994 to 1996. Special Metals recognized losses
on these long-term firm price contracts in 1995 and generally did not earn a
profit on such contracts in 1996 or 1997. All of the firm price contracts
negotiated in 1993 expired prior to December 31, 1997. In recent years, to the
extent that it has entered into long-term agreements, the Company has sought
pricing terms that are either indexed or otherwise accommodate changes in
product and raw material markets.
- 13 -
<PAGE>
Export sales represent a significant portion of the Company's business.
In 1995, 1996 and 1997, sales to purchasers outside of the United States totaled
35%, 28% and 31% of the Company's net sales, respectively. All of the Company's
export sales are conducted in U.S. dollars.
Costs of Goods Sold. The superalloy industry is characterized by high
capital investment and high fixed costs, and profitability is therefore
significantly affected by changes in volume. Variable costs such as raw
materials, labor, supplies and energy (primarily electricity) generally account
for over three-fourths of the Company's costs of goods sold. Fixed costs, such
as indirect overhead and depreciation, constitute the remainder of the Company's
costs of goods sold. The Company has undertaken numerous projects to maintain
and improve its efficiency and cost position over the last few years.
A substantial portion of the Company's raw material used in production
consists of commodities, such as nickel, which are subject to wide price
fluctuations. The price the Company pays for nickel is usually based upon quoted
prices on the London Metals Exchange (the "LME") plus a premium due to quality,
location, and volume purchased. Although the Company's long-term agreements
provide for certain price adjustments to reflect changes in the price of raw
materials, once a customer places an order, the price is fixed and is not
subject to further adjustment. In an attempt to mitigate the risks associated
with raw material price fluctuations and to match raw material purchases with
firm price product orders, the Company often enters into forward contracts to
manage its exposure to changes in nickel prices and also enters into contracts
for the purchase of scrap with customers. Nickel forward contracts obligate the
Company to make or receive payment equal to the net change in value of the
contract at its maturity. Substantially all contracts are designated as hedges
of the Company's firm sales commitments, are timed to correspond to the
commitment period, and are effective in hedging the Company's exposure to
changes in nickel prices during that cycle. At December 31, 1997, the Company
had open purchase contracts with a notional principal value of approximately
$12.7 million. The fair value of the material covered by these contracts, based
on the December 31, 1997 price quoted on the LME, was approximately $10.8
million. Unrealized gains and losses on the contracts which have been
designated, and are effective, as hedges for firm sales commitments, totaling
approximately $1.6 million, have been deferred. Unrealized losses on forward
contracts not designated or effective as hedges, totaling approximately $.3
million, have been recognized in income currently.
Selling, General and Administrative Expenses. Selling, general and
administrative expenses represent costs associated with sales and marketing,
research and development, legal expenses, and the office of the president.
- 14 -
<PAGE>
Results Of Operations
The following table sets forth, for the periods indicated, statement of
operations data as a percentage of net sales.
Year Ended December 31,
1995 1996 1997
---------------------------
Net sales 100.0% 100.0% 100.0%
Cost of goods sold 86.8 82.5 76.3
---------------------------
Gross profit 13.2 17.5 23.7
Selling, general and administrative
expenses 3.9 3.3 3.7
---------------------------
Operating income 9.3 14.2 20.0
Other (income) expense:
Interest expense 3.6 2.5 .4
Abandoned acquisition costs -- -- .3
Other -- -- (.4)
---------------------------
3.6 2.5 0.3
---------------------------
Income before income taxes 5.7 11.7 19.7
Income tax expense (benefit) .3 (.1) 7.3
---------------------------
Net income 5.4% 11.8% 12.4%
==========================
Year Ended December 31, 1997 Compared With Year Ended December 31, 1996
Net Sales. Net sales increased $23.8 million, or 14.6%, from $162.3
million in 1996 to $186.1 million in 1997. This increase was principally due to
a shift in the Company's product mix toward higher value-added products and
improved pricing, offset somewhat by a slight decrease in pounds shipped.
Cost of Goods Sold. Cost of goods sold increased $8.2 million, or 6.1%,
from $133.8 million in 1996 to $142.0 million in 1997, primarily as a result of
increased sales and increased costs associated with implementing the new
management information systems, offset, in part, by cost reduction programs. In
addition, depreciation and amortization expense decreased from $4.4 million in
1996 to $3.6 million in 1997 as a result of various fixed and intangible assets
becoming fully depreciated or amortized, as applicable. As a percentage of net
sales, cost of goods sold decreased from 82.5% in 1996 to 76.3% in 1997
primarily due to the allocation of the fixed portion of overhead included in
cost of goods sold to a larger sales base.
Gross Profit. Gross profit increased $15.6 million, or 54.7% from $28.5
million in 1996 to $44.1 million in 1997. This increase was due primarily to
increased sales and cost reduction programs.
Selling, General and Administrative Expenses. Selling, general and
administrative expenses increased $1.6 million, or 28.7% from $5.4 million in
1996 to $7.0 million in 1997. The increase was due primarily to the increase in
net sales, an increase in the Company's research and development activities, and
increased expenses associated with the Board of Directors and the managerial
assistance agreement with one of its principal stockholders. Selling, general
and administrative expenses as a percentage of net sales increased from 3.3% in
1996 to 3.7% in 1997.
Operating Income. Operating income increased $14.0 million, or 60.8%
from $23.1 million in 1996 to $37.1 million in 1997. Operating income as a
percentage of net sales increased from 14.2% in 1996 to 20.0% in 1997 as a
result of increased net sales offset in part by increased expenses.
- 15 -
<PAGE>
Interest Expense. Interest expense decreased $3.4 million, or 83.6%,
from $4.1 million in 1996 to $.7 million in 1997. This decrease was due
primarily to the repayment of debt outstanding with the proceeds from the
Company's initial public offering during the first quarter of 1997.
Income Taxes. Income tax expense increased $13.6 million from a benefit
of $(.1) in 1996 to an expense of $13.5 million in 1997. The Company's effective
income tax rate for 1996 varied from the U.S. statutory rate due to utilization
of net operating losses and alternative minimum tax credit carryforwards and
also due to the recognition of previously unrecognized deferred tax assets of
$3.7 million.
Net Income. Net income increased 20.5% from $19.1 million in 1996 to
$23.0 million in 1997. Net income as a percentage of net sales increased from
11.8% for 1996 to 12.4% for 1997 primarily as a result of stronger demand for
the Company's products in the aerospace industry and cost reduction programs.
Year Ended December 31, 1996 Compared With Year Ended December 31, 1995
Net Sales. Net sales increased $30.1 million, or 22.8%, from $132.2
million in 1995 to $162.3 million in 1996. This increase was principally due to
a shift in the Company's product mix toward higher value-added products and
improved pricing, offset somewhat by a slight decrease in pounds shipped.
Cost of Goods Sold. Cost of goods sold increased $19.1 million, or
16.6%, from $114.7 million in 1995 to $133.8 million in 1996, primarily as a
result of increased sales partially offset by improved manufacturing
efficiencies and cost reduction programs. In addition, depreciation and
amortization expense decreased from $6.3 million in 1995 to $4.4 million in 1996
as a result of various fixed and intangible assets becoming fully depreciated or
amortized, as applicable. As a percentage of net sales, cost of goods sold
decreased from 86.8% in 1995 to 82.5% in 1996 primarily due to the improved
pricing related in 1996 as well as to the allocation of the fixed portion of
overhead included in cost of goods sold to a larger sales base.
Gross Profit. Gross profit increased $11.0 million, or 62.8% from $17.5
million in 1995 to $28.5 million in 1996. This increase was due primarily to
increased sales, cost reduction programs and improved manufacturing
efficiencies.
Selling, General and Administrative Expenses. Selling, general and
administrative expenses increased $.2 million, or 3.9% from $5.2 million in 1995
to $5.4 million in 1996. The increase was due primarily to the increase in net
sales. Selling, general and administrative expenses as a percentage of net sales
decreased from 3.9% in 1995 to 3.3% in 1996 primarily due to the allocation of
the fixed components of selling, general and administrative costs to a larger
sales base.
Operating Income. Operating income increased $10.8 million, or 87.7%
from $12.3 million in 1995 to $23.1 million in 1996. Operating income as a
percentage of net sales increased from 9.3% in 1995 to 14.2% in 1996 as a result
of increased net sales offset in part by increased expenses.
Interest Expense. Interest expense decreased $.6 million, or 13.7%,
from $4.7 million in 1995 to $4.1 million in 1996. This decrease was due
primarily to a decrease in average debt outstanding and to an overall decrease
in interest rates.
Income Taxes. The Company had an income tax expense of $.4 million in
1995, compared to an income tax benefit of $(.1) million in 1996. The Company's
effective income tax rate for 1995 and 1996 varied from the U.S. statutory rate
due to utilization of net operating losses and alternative minimum tax credit
carryforwards and, in 1996 only, also due to the recognition of previously
unrecognized deferred tax assets of $3.7 million.
- 16 -
<PAGE>
Net Income. Net income increased 165% from $7.2 million in 1995 to
$19.1 million in 1996. Net income as a percentage of net sales increased from
5.4% for 1995 to 11.7% for 1996 primarily as a result of stronger demand for the
Company's products in the aerospace industry, cost reduction programs, improved
manufacturing efficiencies and recognition of certain unrecognized deferred tax
assets.
Liquidity and Capital Resources
The Company's liquidity needs arise primarily from capital investments
and working capital. The Company has historically met these liquidity
requirements with funds generated from operations and from short-term and
long-term debt financing (including borrowings from the Principal Stockholders).
The Company's business is capital intensive and requires substantial
expenditures for, among other things, the purchase and maintenance of equipment
used in the manufacturing process and compliance with environmental laws.
Net cash provided by operating activities was $6.9 million, $10.9
million and $22.1 million for 1995, 1996 and 1997, respectively. Improvements in
cash flows from operating activities are principally the result of improved
operating results, offset by increased working capital requirements principally
attributable to increases in accounts receivable and inventory resulting from
increased sales during the period.
Capital expenditures were $2.0 million, $2.8 million and $9.9 million
for the years 1995, 1996 and 1997, respectively.
The Company's principal sources of funds are (i) funds generated from
operations and (ii) borrowings under the Company's Credit Agreement with Credit
Lyonnais and other financial institutions from time to time party thereto (the
"Credit Agreement"). Under the Credit Agreement, as amended, the Company may
borrow, repay, and re-borrow from time to time, the lesser of (a) $56 million,
declining $4 million per year from 1998 through 2001, at which time all
remaining outstanding amounts are due, or (b) the Company's borrowing base. The
Credit Agreement defines the Company's borrowing base as the sum of 85% of
eligible accounts receivable and 60% of eligible inventory. As of December 31,
1997, the borrowing base was $50.1 million. The Company's ability to borrow
under the Credit Agreement is subject to the satisfaction of various conditions,
including compliance with certain financial covenants. The amount the Company
may borrow under the Credit Agreement is reduced by the aggregate amount of any
letters of credit issued for the account of the Company. All advances under the
Credit Agreement bear interest at the Company's option at (i) a base rate, which
is the higher of the bank's short-term commercial reference rate or the Federal
Funds rate plus .25%, (ii) the Eurodollar rate, which is the New York interbank
offered rate, plus 1.25% or (iii) LIBOR plus 1.25%. A commitment fee of .20% per
annum on the unused available working capital commitment is due monthly. At
December 31, 1997, there were no amounts outstanding under the Credit Agreement.
The Company's obligations under the Credit Agreement are secured by the
Company's receivables, inventory and general intangibles. The Credit Agreement
also contains covenants restricting the ability of the Company to make certain
restricted payments, create liens, guarantee indebtedness, or enter into
transactions with affiliates. The Company is also subject to certain financial
tests relating to, among other things, its consolidated net worth, its
consolidated leverage ratio and the ratio of its senior debt to consolidated
earnings before interest, taxes, depreciation and amortization ("EBITDA"). The
Company may prepay amounts owing under the Credit Agreement at its option at any
time.
Over the next four years, the Company plans to invest up to $54 million
in capital expenditures to expand and modernize its melting, forging and
finishing equipment, install a state-of-the-art information system and make
other investments to maintain its position as a technical leader. Currently
planned capital expenditures for 1998 include the completion of two VAR
furnaces, an ESR furnace, construction and equipping of a new 20,000 square foot
building at its New Hartford facility, upgrades to the management
- 17 -
<PAGE>
information systems and a potential upgrade in forging capabilities. In addition
to planned capital expenditures, the Company expects to evaluate from time to
time potential acquisitions. Potential acquisitions may include investments in
companies, technologies or products that complement the Company's business or
products. Sources of funds for such acquisitions could include funds generated
from operations or alternative sources of debt or equity capital. Certain
covenants in the Credit Agreement may restrict or limit the Company's ability to
enter into or complete an acquisition. Under such circumstances, the Company
would need to amend, obtain a waiver of or refinance the Credit Agreement.
The Company does not expect the future recurring operation costs of compliance
with currently enacted environmental laws and adopted or proposed regulations to
have a material impact on its liquidity and capital resources. However, the
imposition of more strict standards or requirements under environmental laws and
the possibility of increased enforcement could result in expenditures in excess
of amounts estimated to be required for such matters.
The Company expects that its cash and cash equivalents on hand, cash flow
from operations and borrowing capacity under the Credit Agreement will be
adequate to meet its anticipated operating requirements and planned capital
expenditures over the next 12 months.
Backlog
As of December 31, 1997, the Company's backlog orders aggregated
approximately $155.5 million, compared to approximately $146.2 million at
December 31, 1996. The increase in backlog orders is primarily due to market
demand and customer order patterns. The Company defines backlog as firm purchase
orders, which are generally subject to cancellation by the customer.
Substantially all orders in the backlog at December 31, 1997 are expected to be
shipped within the 12 months beginning January 1, 1998. Due to the cyclical
nature of order entry experienced by the Company and its dependence on the
aerospace industry, there can be no assurance that order entry will continue at
current levels or that current firm purchase orders will not be canceled or
delayed.
Inflation
Although the Company's sales and results of operations are affected by
the prices of raw materials used to make its products and the cyclicality of the
aerospace industry, the Company does not believe that general economic inflation
has had a material effect on its results of operation for the periods presented.
Legal Proceedings
Reference is made to the information included in Item 3 - Legal
Proceedings beginning on page 6 of this Form 10-K, which is hereby incorporated
by reference.
Impact of Year 2000
Based on a preliminary assessment, the Company believes it will be
required to modify or replace portions of its software so that its computer
systems will function properly with respect to dates in the year 2000 and
thereafter. The Company has undertaken a project aimed at replacing its current
management information systems with new management information systems which it
believes will function properly with respect to dates in the year 2000 and
thereafter. However, the Company also believes that modifications to certain of
its process control computers will be required so that they will function
properly with respect to dates in the year 2000 and thereafter. The Company
presently believes that with modifications to existing software and conversions
to new software, the year 2000 issue will not pose significant operational
problems for its computer systems. However, if such modifications and
conversions are not made, or are not completed
- 18 -
<PAGE>
timely, a material impact on the operations of the Company could result.
The Company is in the process of initiating formal communications with
its significant suppliers and large customers to determine the extent to which
the Company is vulnerable to those third parties' failure to remediate their own
year 2000 issues. The Company's estimate of the time to complete its year 2000
project includes the estimated time associated with the impact of third party
year 2000 issues, and is based on presently available information. However,
there can be no guarantee that the systems of other companies on which the
Company's systems rely will be timely converted and would not have an adverse
effect on the Company's systems. The Company has determined it has no exposure
to contingencies related to the year 2000 issue for the products it has sold.
The Company expects to utilize both internal and external resources to
reprogram, or replace, and test the software for year 2000 modifications. The
Company anticipates completing the year 2000 project in 1999, prior to any
anticipated impact on its operating systems. The Company is not able, at this
time, to estimate what the ultimate cost of its year 2000 project will be.
The time frame during which the Company believes it will complete the
year 2000 modifications is based on management's best estimates, which were
derived utilizing numerous assumptions of future events, including the continued
availability of certain resources, third party modification plans and other
factors. However, there can be no guarantee that the estimated time of
completion will be achieved and actual results could differ materially from
those anticipated. Specific factors that might cause such material differences
include, but are not limited to, the availability and cost of personnel trained
in this area, the ability to locate and correct all relevant computer codes, and
similar uncertainties.
Impact of New Accounting Standards
In June 1997, the Financial Accounting Standards Board issued Statement 130,
"Reporting Comprehensive Income." Statement 130 establishes new rules for the
reporting and display of comprehensive income and its components; however,
adoption in 1998 will have no impact on the Company's net income or
shareholders' equity. Statement 130 requires the pension adjustment, which
currently is reported in shareholders' equity, to be included in other
comprehensive income and the disclosure of total comprehensive income. If the
Company adopted Statement 130 for the year ended December 31, 1997, the total of
other comprehensive income items, reported as a component of shareholders'
equity, and comprehensive income (which includes net income) would be $(496,000)
and $23,203,000, respectively, and would be displayed separately.
In June 1997, the Financial Accounting Standards Board issued Statement 131,
"Disclosure About Segments of an Enterprise and Related Information," which is
effective for years beginning after December 15, 1997. Statement 131 establishes
standards for the way that public business enterprises report information about
operating segments in annual financial statements and requires that those
enterprises report selected information about operating segments in interim
financial reports. It also establishes standards for related disclosures about
products and services, geographic areas, and major customers. The Company will
adopt the new requirements retroactively during 1998. Management does not expect
that the adoption of this statement will result in the Company reporting
additional segments.
- 19 -
<PAGE>
Item 8 - Financial Statements and Supplementary Data
Index to Financial Statements
Page in
Form 10-K
---------
Report of Independent Auditors 21
Balance Sheets 22
Statements of Income 24
Statements of Shareholders' Equity 25
Statements of Cash Flows 26
Notes to Financial Statements 27
- 20 -
<PAGE>
Report of Independent Auditors
Board of Directors
Special Metals Corporation
We have audited the accompanying balance sheets of Special Metals Corporation as
of December 31, 1996 and 1997, and the related statements of income,
shareholders' equity, and cash flows for each of the three years in the period
ended December 31, 1997. Our audits also included the financial statement
schedule listed in the Index at Item 14(a). These financial statements and
schedule are the responsibility of the Company's management. Our responsibility
is to express an opinion on these financial statements and schedule based on our
audits.
We conducted our audits in accordance with generally accepted auditing
standards. Those standards require that we plan and perform the audit to obtain
reasonable assurance about whether the financial statements are free of material
misstatement. An audit includes examining, on a test basis, evidence supporting
the amounts and disclosures in the financial statements. An audit also includes
assessing the accounting principles used and significant estimates made by
management, as well as evaluating the overall financial statement presentation.
We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the financial statements referred to above present fairly, in
all material respects, the financial position of Special Metals Corporation at
December 31, 1996 and 1997, and the results of its operations and its cash flows
for each of the three years in the period ended December 31, 1997 in conformity
with generally accepted accounting principles. Also, in our opinion, the related
financial statement schedule, when considered in relation to the basic financial
statements taken as a whole, presents fairly in all material respects the
information set forth therein.
/s/ Ernst & Young LLP
---------------------
Ernst & Young LLP
Buffalo, New York
January 30, 1998
- 21 -
<PAGE>
Special Metals Corporation
Balance Sheets
(In thousands, except share and per share amounts)
December 31,
1996 1997
---------------------
Assets
Current assets:
Cash and cash equivalents $ 3,336 $ 12,237
Restricted deposits -- 1,161
Accounts receivable - trade, less
allowance for doubtful accounts
of $120 for 1996 and $168 for
1997 26,640 25,427
Accounts receivable - affiliates 1,989 4,785
Inventories 42,739 50,580
Deferred income taxes 2,995 2,375
Prepaid expenses 382 216
---------------------
Total current assets 78,081 96,781
Property, plant and equipment 33,231 39,727
Deferred income taxes 1,743 1,618
Other assets 3,437 3,624
---------------------
Total assets $ 116,492 $ 141,750
=====================
SEE ACCOMPANYING NOTES.
- 22 -
<PAGE>
December 31,
1996 1997
---------------------
Liabilities and Shareholders' Equity
Current liabilities:
Accounts payable $ 12,856 $ 15,688
Accrued payroll and employee benefits 7,823 6,940
Accrued other liabilities 3,968 4,519
Income taxes payable 187 493
Current portion of long-term debt 4,000 -
Current obligation under capital leases 296 316
Subordinated notes payable to affiliates 1,500 -
------------------
Total current liabilities 30,630 27,956
Long-term debt 42,000 -
Long-term obligation under capital leases 513 174
Other long-term liabilities 8,574 9,649
------------------
Total liabilities 81,717 37,779
Commitments and contingencies
Shareholders' equity:
Preferred stock, $0.01 par value,
10,000,000 shares authorized, no shares
issued and outstanding - -
Common stock, $0.01 par value, 35,000,000
shares authorized, 12,400,000 and
15,477,000 shares issued and outstanding
at December 31, 1996 and 1997, respectively 124 155
Paid-in surplus 29,716 75,678
Pension adjustment (697) (496)
Retained earnings 5,632 28,634
------------------
Total shareholders' equity 34,775 103,971
------------------
Total liabilities and shareholders' equity $ 116,492 $ 141,750
=====================
SEE ACCOMPANYING NOTES.
- 23 -
<PAGE>
Special Metals Corporation
Statements of Income
(In thousands, except per share amounts)
Year ended December 31
1995 1996 1997
----------------------------------
Net sales to non-affiliates $ 117,217 $155,322 $ 175,570
Net sales to affiliates 15,028 6,978 10,501
----------------------------------
132,245 162,300 186,071
Cost of goods sold 114,752 133,828 142,029
----------------------------------
17,493 28,472 44,042
Selling, general and administrative
expenses 5,207 5,408 6,958
----------------------------------
Operating income 12,286 23,064 37,084
Other (income) expense
Interest expense 4,727 4,079 670
Abandoned acquisition costs - - 554
Other - - (661)
----------------------------------
4,727 4,079 563
----------------------------------
Income before income taxes 7,559 18,985 36,521
Income tax expense (benefit) 354 (96) 13,519
----------------------------------
Net income $ 7,205 $ 19,081 $ 23,002
==================================
Earnings per common share, basic and
assuming dilution $ 0.58 $ 1.54 $ 1.53
==================================
SEE ACCOMPANYING NOTES.
- 24 -
<PAGE>
Special Metals Corporation
Statements of Shareholders' Equity
(In thousands)
<TABLE>
<CAPTION>
Common stock
------------
Retained
Earnings
Paid-in Pension (Accumulated
Shares Par Surplus Adjustment Deficit)
-------------------------------------------------------------------------------
<S> <C> <C> <C> <C> <C>
Balance - December 31,
1994 12,400 $ 124 $ 29,716 $ (199) $ (20,654)
Minimum pension liability
adjustment, net of tax - - - (526) -
Net income - - - - 7,205
-------------------------------------------------------------------------------
Balance - December 31,
1995 12,400 124 29,716 (725) (13,449)
Minimum pension liability
adjustment, net of tax - - - 28 -
Net income - - - - 19,081
-------------------------------------------------------------------------------
Balance - December 31,
1996 12,400 124 29,716 (697) 5,632
Sale of common stock 3,075 31 45,926 - -
Common stock grants 2 - 36 - -
Minimum pension liability
adjustment, net of tax - - - 201 -
Net income - - - - 23,002
-------------------------------------------------------------------------------
Balance - December 31,
1997 15,477 $ 155 $ 75,678 $ (496) $ 28,634
===============================================================================
</TABLE>
SEE ACCOMPANYING NOTES.
- 25 -
<PAGE>
Special Metals Corporation
Statements of Cash Flows
(In thousands)
<TABLE>
<CAPTION>
Year ended December 31
1995 1996 1997
---------------------------------------
<S> <C> <C> <C>
Operating Activities
Net income $ 7,205 $ 19,081 $ 23,002
Adjustments to reconcile net income to net
cash provided by operating activities:
Depreciation and amortization 6,281 4,440 3,612
Provision for doubtful accounts 25 20 48
Loss on sale of fixed assets 5 1 2
Provision for deferred income taxes - (4,071) 584
Incentive stock compensation - - 36
Change in assets and liabilities:
Accounts receivable (8,552) (1,779) (1,631)
Inventories (9,955) (3,683) (7,841)
Prepaid expenses 9 (122) 166
Income taxes 355 (262) 306
Accounts payable 7,797 (1,972) 2,832
Accrued payroll and employee benefits 1,433 (276) (659)
Accrued other liabilities 2,203 (1,035) 551
Other long-term liabilities 52 594 1,075
---------------------------------------
Net cash provided by operating activities 6,858 10,936 22,083
Investing Activities
Capital expenditures (1,963) (2,805) (9,935)
Net change in restricted deposits - - (1,161)
Proceeds from sale of fixed assets 3 - 8
---------------------------------------
Net cash used in investing activities (1,960) (2,805) (11,088)
Financing Activities
Proceeds from sale of common stock - - 45,957
Proceeds from refinanced revolving credit facility - 29,000 -
Proceeds from refinanced term loans - 20,000 -
Borrowings under revolving credit facilities 5,500 8,300 -
Repayment of revolving credit facilities (5,200) (39,100) (26,000)
Repayment of subordinated notes payable to affiliates - (7,000) (1,500)
Repayment of term loans (4,000) (18,000) (20,000)
Financing and other deferred costs (274) (321) (232)
Payments on capital lease obligations (240) (287) (319)
---------------------------------------
Net cash used in financing activities (4,214) (7,408) (2,094)
---------------------------------------
Net increase in cash 684 723 8,901
Cash and cash equivalents at beginning of year 1,929 2,613 3,336
---------------------------------------
Cash and cash equivalents at end of year $ 2,613 $ 3,336 $ 12,237
=======================================
</TABLE>
SEE ACCOMPANYING NOTES.
- 26 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements
December 31, 1995, 1996 and 1997
1. Accounting Policies
Description of Business
Special Metals Corporation (the Company) is a manufacturer of superalloys. The
Company sells its products world-wide, with a substantial portion being sold to
customers in the aerospace industry. The Company performs periodic credit
evaluations of its customers' financial condition and generally does not require
collateral. An allowance for doubtful accounts is maintained at a level which
management believes is sufficient to cover potential credit losses.
Revenue Recognition
The Company recognizes revenue at the time of shipment to the customer. The
Company periodically enters into long-term sales contracts, the terms of which
may include firm prices. The Company recognizes revenues on those sales
contracts as the related product is shipped. Depending upon market conditions at
the time the contracts are entered into and upon anticipated changes in raw
material costs, these sales contracts could result in losses. The Company
regularly monitors these contracts and provides for any losses at the time the
loss is known.
Cash and Cash Equivalents
The Company considers all highly liquid investments with an original maturity of
three months or less to be cash equivalents.
Inventories
Inventories are valued at the lower of cost or market. Cost is determined on the
FIFO (first-in, first-out) method of accounting.
Property, Plant and Equipment
Property, plant and equipment are stated at cost and depreciated on the
straight-line method over the estimated useful lives of the assets, principally
20 - 40 years for buildings and improvements, 12 years for machinery and
equipment, 3 years for data processing equipment, and 10 years for furniture and
fixtures. The cost of property, plant and equipment held under capital leases is
equal to the lower of the net present value of the minimum lease payments, using
interest rates appropriate at the inception of the lease, or the fair value of
the leased property, plant and equipment at the inception of the lease.
Depreciation expense includes the amortization of property, plant and equipment
recorded under capital leases.
- 27 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
1. Accounting Policies (continued)
Excess of Purchase Price Over Net Assets Acquired
The excess of purchase price over net assets acquired is being amortized on the
straight-line method over 40 years. The Company periodically reviews this asset
to assess recoverability. Impairments would be recognized in operating results
if a permanent reduction in value were to occur.
Impairment of Long-Lived Assets
The Company reviews asset carrying amounts whenever events or circumstances
indicate that such carrying amounts may not be recoverable. When considered
impaired, the carrying amount of the asset is reduced, by a charge to income, to
its current fair value.
Taxes on Income
The Company accounts for income taxes in accordance with Statement of Financial
Accounting Standards No. 109, "Accounting for Income Taxes" ("SFAS 109"). Under
SFAS 109, deferred income taxes are recognized for the tax consequences of
temporary differences by applying enacted statutory rates applicable to future
years to differences between the financial statement carrying amounts and the
tax basis of existing assets and liabilities. The effect of a change in tax
rates is recognized in the period that includes the enactment date.
General business credits, including investment tax credits and research and
development credits, are accounted for using the flow-through method.
Environmental Liabilities
Environmental expenditures that relate to current or future revenues are
expensed or capitalized as appropriate. Expenditures that relate to an existing
condition caused by past operations and that are not allocable to current or
future earnings are expensed. Liabilities for environmental costs are recognized
when environmental assessments or clean-ups are probable and the associated
costs can be reasonably estimated.
- 28 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
1. Accounting Policies (continued)
Stock-Based Compensation
The Company accounts for stock options granted under its stock-based
compensation plan in accordance with the intrinsic value based method of
accounting as prescribed by Accounting Principles Board Opinion No. 25,
"Accounting for Stock Issued to Employees" ("APB 25"), as allowed under
Financial Accounting Standards No. 123, "Accounting for Stock-Based
Compensation" ("SFAS 123"). Accordingly, compensation cost for stock options is
measured as the excess, if any, of the fair market value of the Company's stock
at the date of grant over the amount an employee must pay to acquire the stock.
Research and Development Costs
Product research and development costs are charged to expense as incurred.
Research and development expense for the years ended December 31, 1995, 1996 and
1997 was $1,313,000, $1,649,000, and $1,906,000, respectively.
Earnings Per Share
In 1997, the Financial Accounting Standards Board issued Statement of Financial
Accounting Standards No. 128, "Earnings per Share" ("SFAS 128"). SFAS 128
replaced the calculation of primary and fully diluted earnings per share with
basic and diluted earnings per share. Unlike primary earnings per share, basic
earnings per share excludes any dilutive effects of options, warrants and
convertible securities. Diluted earnings per share is very similar to the
previously reported fully diluted earnings per share. SFAS 128 did not impact
previously reported earnings per share.
Forward Purchase Contracts
As part of its risk management strategy, the Company purchases forward contracts
to manage its exposure to changes in nickel prices. The nickel forward contracts
obligate the Company to make or receive payment equal to the net change in value
of the contract at its maturity. Substantially all contracts are designated as
hedges of the Company's firm sales commitments, are short-term in nature to
correspond to the commitment period, and are effective in hedging the Company's
exposure to changes in nickel prices during that cycle.
- 29 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
1. Accounting Policies (continued)
Forward Purchase Contracts (continued)
Forward contracts are marked to market with unrealized gains and losses deferred
and recognized in earnings when realized as an adjustment to cost of goods sold
(the deferral accounting method). Unrealized changes in fair value of contracts
not effective as hedges are recognized in income. Historically, the Company has
not closed any contracts prior to the execution of the underlying sale
transaction, nor have any of the underlying sales transactions failed to occur.
Restricted Deposits
The Company is required to maintain on deposit with a broker a margin account to
cover unrealized losses on its forward purchase contracts in excess of $750,000.
Such amounts have been recorded on the Company's balance sheet as restricted
deposits.
Use of Estimates
The preparation of financial statements in conformity with generally accepted
accounting principles requires management to make estimates and assumptions that
affect the amounts reported in the financial statements and accompanying notes.
Actual results could differ from those estimates.
2. Inventories
Inventories consist of the following:
December 31
1996 1997
---------------------------
(In thousands)
Raw materials and supplies $ 11,388 $ 13,007
Work-in-process 31,351 37,573
---------------------------
$ 42,739 $ 50,580
===========================
- 30 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
3. Property, Plant and Equipment
Property, plant and equipment consist of the following:
December 31
1996 1997
-------------------------
(In thousands)
Land $ 1,272 $ 1,272
Buildings and improvements 18,420 19,509
Machinery and equipment 49,312 51,381
Furniture and fixtures 356 431
Construction-in-progress 1,011 7,649
-------------------------
70,371 80,242
Less accumulated depreciation 37,140 40,515
-------------------------
$ 33,231 $ 39,727
=========================
Depreciation expense for the years ended December 31, 1995, 1996 and 1997 was
$4,397,000. $3,180,000, and $3,429,000, respectively.
4. Other Assets
Other long-term assets consist of the following:
December 31
1996 1997
------------------------
(In thousands)
Excess of purchase price over net
assets acquired $ 3,912 $ 3,912
Deferred financing costs 271 339
Technology agreement 50 214
Agreement not to compete 64 64
Deferred lease costs 76 76
------------------------
4,373 4,605
Less accumulated amortization 1,020 1,203
------------------------
3,353 3,402
Intangible pension asset 27 165
Other 57 57
------------------------
$ 3,437 $ 3,624
========================
- 31 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
5. Long-Term Debt
During 1997, the Company repaid all amounts owing under its Credit Agreement
with proceeds from the Company's initial public offering in the first quarter of
1997.
During 1997, the Company amended its Credit Agreement. Under the Credit
Agreement, as amended, the Company may borrow, repay, and re-borrow from time to
time, the lesser of (a) $56,000,000, declining $4,000,000 per year through 2001,
at which time all remaining amounts outstanding are due, or (b) the Company's
borrowing base. The Credit Agreement defines the Company's borrowing base as the
sum of 85% of eligible accounts receivable and 60% of eligible inventory. The
Company's ability to borrow under the Credit Agreement is subject to the
satisfaction of various conditions, including compliance with certain financial
covenants. The amount the Company may borrow under the Credit Agreement is
reduced by the aggregate amount of any letters of credit issued for the account
of the Company. All advances under the Credit Agreement bear interest at the
Company's option at (i) a base rate, which is the higher of the bank's
short-term commercial reference rate or the Federal Funds rate plus .25%, (ii)
the Eurodollar rate, which is the New York interbank offered rate, plus 1.25% or
(iii) the London interbank offered rate (LIBOR) plus 1.25%. An annual commitment
fee of .20% on the unused available revolving credit facility commitment is due
monthly.
The Company's obligations under the Credit Agreement are secured by the
Company's receivables, inventory and general intangibles. The Credit Agreement
also contains covenants, including restrictions on the ability of the Company to
make certain restricted payments, incur additional indebtedness, make certain
investments, create liens, guarantee indebtedness and enter into transactions
with affiliates. The Company is also subject to certain financial tests relating
to, among other things, its consolidated net worth, its consolidated leverage
ratio and the ratio of its senior debt to consolidate earnings before interest,
taxes, depreciation and amortization (EBITDA). The Company may prepay amounts
owing under the Credit Agreement at its option at any time.
- 32 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
6. Capital Lease Obligations
The Company has entered into non cancelable leases for certain equipment. The
leases expire in 1998 through 2000 and contain bargain purchase options. The
property held under capital leases is included in the balance sheet as follows:
December 31
1996 1997
-----------------------
(In thousands)
Equipment $ 1,863 $ 1,863
Less: accumulated amortization 745 930
-----------------------
$ 1,118 $ 933
=======================
Future minimum lease payments for equipment under capital leases at December 31,
1997 are as follows (in thousands):
1998 $ 348
1999 191
2000 4
---------
543
Less: amount representing interest 53
Present value of net minimum lease
payments (including long-term
obligations of $174) $ 490
=========
7. Operating Leases
The Company leases certain equipment under operating leases which contain
renewal options and escalation clauses in some cases. Rental expense under these
leases amounted to approximately $500,000, $460,000 and $460,000 for the years
ended December 31, 1995, 1996 and 1997, respectively. The following amounts
represent future minimum payments under operating leases with initial or
remaining noncancelable terms extending beyond one year (in thousands):
1998 $ 508
1999 424
2000 406
2001 73
2002 5
- 33 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
8. Retirement Plans
The Company has several noncontributory defined benefit pension plans covering
substantially all employees of the Company. Benefits for salaried employees and
certain hourly employees are based on earnings and years of benefit service.
Benefits for remaining hourly employees are based on years of service multiplied
by pre-established benefit rates. The Company's funding policy is to contribute
annually at least the minimum amount required by the Employee Retirement Income
Security Act of 1974, as amended ("ERISA"). Unrecognized differences between
actual experience and that assumed and prior service costs are amortized on a
straight-line basis over a period approximating the average remaining service
period for active employees.
Assets of the plans are commingled in a Master Trust which invests in a variety
of investment vehicles, principally debt and equity securities.
Net pension cost included the following:
<TABLE>
<CAPTION>
Year ended December 31
1995 1996 1997
-----------------------------------------------------
(In thousands)
<S> <C> <C> <C>
Service cost - benefits earned
during the period $ 724 $ 1,193 $ 1,459
Interest cost on projected benefit obligation 2,416 2,406 2,577
Actual return on plan assets (4,636) (3,724) (8,837)
Net amortization and deferral 2,997 1,230 5,907
-----------------------------------------------------
Net periodic pension cost $ 1,501 $ 1,105 $ 1,106
=====================================================
</TABLE>
- 34 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
8. Retirement Plans (continued)
The following table sets forth the Plans' funded status at December 31, 1996 and
1997:
<TABLE>
<CAPTION>
1996 1997
--------------- --------------------------------------------------
Plans with Plans with
Assets in Accumulated
Excess of Benefits
Accumulated in excess of
Benefits Assets Total
--------------------------------------------------
(In thousands)
<S> <C> <C> <C> <C>
Actuarial present value:
Vested benefit obligation $ 33,149 $ 18,332 $ 20,235 $ 38,567
===================================================================
Accumulated benefit obligation $ 34,312 $ 19,584 $ 20,377 $ 39,961
===================================================================
Projected benefit obligation $ 35,203 $ 20,797 $ 20,377 $ 41,174
Plan assets at fair value 30,910 20,604 18,871 39,475
-------------------------------------------------------------------
Projected benefit obligation in excess
of plan assets (4,293) (193) (1,506) (1,699)
Unrecognized net loss (gain) 2,743 (589) 1,358 769
Prior service credit (1,309) (861) (393) (1,254)
Adjustment to recognize minimum pension
liability (1,189) - (965) (965)
-------------------------------------------------------------------
Pension liability recorded in financial
statements $ (4,048) $ (1,643) $ (1,506) $ (3,149)
====================================================================
</TABLE>
The pension liability is recorded in the balance sheet as follows:
December 31
1996 1997
-----------------------
(In thousands)
Accrued payroll and employee benefits $ 1,002 $ 76
Other long-term liabilities 3,046 3,073
-----------------------
$ 4,048 $ 3,149
=======================
The projected benefit obligation is based on a weighted-average assumed discount
rate of 7.5% at December 31, 1997 and 1996, and an assumed rate of compensation
increase of 5% at December 31, 1997 and 1996. The weighted-average expected
long-term rate of return on plan assets used to determine the expected return on
plan assets in net periodic pension cost was 9% for all periods presented.
- 35 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
8. Retirement Plans (continued)
The Company also sponsors a defined contribution plan covering all salaried
employees. Participants may elect to contribute basic contributions between 1%
and 15% of base compensation. Basic contributions consist solely of elective
deferrals which may be excluded from the participant's gross income for Federal
tax purposes pursuant to Section 401(k) of the Internal Revenue Code of 1986
(the "Code"). A participant may also elect to contribute additional after-tax
contributions of up to 10% for each plan year up to the annual limit on elective
deferrals under the Code. The Company may, at the sole discretion of its Board
of Directors, contribute, as a matching contribution, an amount not to exceed
50% of the participants' basic contributions up to a maximum of 4%. In addition,
the Company may, at its sole discretion, make discretionary contributions which
are allocated to participants in accordance with the Plan provisions. The
Company recorded a charge for such contributions of approximately $200,000,
$220,000, and $290,000 in 1995, 1996 and 1997, respectively.
The Company also sponsors a defined contribution plan covering all employees
covered by the collective bargaining agreement between the Company and
I.A.M.--Local Lodge #2310. Participants may elect to contribute basic
contributions between 1% and 15% of compensation. Basic contributions consist
solely of elective deferrals which may be excluded from the participant's gross
income for Federal tax purposes pursuant to Section 401(k) of the Code. A
participant may also elect to contribute additional after-tax contributions of
up to 10%. The Company may, at its sole discretion, make discretionary
contributions which are allocated to participants in accordance with the Plan
provisions. There were no Company contributions made to the plan in 1995, 1996,
or 1997.
9. Postretirement Healthcare and Life Insurance Benefits
The Company provides certain healthcare and life insurance benefits to eligible
retired employees and their spouses. Participants generally become eligible for
these benefits after achieving certain age and years of service requirements.
Employees at certain of the Company's facilities are not eligible for
postretirement healthcare and life insurance benefits. For certain hourly
employees retiring after August 1, 1989, healthcare coverage ceases after the
retiree reaches age 65. Health and life insurance benefits are provided through
insurance contracts. The health insurance plans are contributory and contain
other cost-sharing features such as deductibles, coinsurance, and lifetime
maximums. Life insurance benefits are generally a factor of final compensation
for salaried employees and are pre-defined for eligible hourly employees. The
Company's current policy is to fund these benefits on a pay-as-you-go basis.
- 36 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
9. Postretirement Healthcare and Life Insurance Benefits (continued)
The amounts recognized in the Company's balance sheets, in other long-term
liabilities, were as follows:
<TABLE>
<CAPTION>
Health Life
Care Insurance Total
(In thousands)
--------------------------------------------------
December 31, 1997:
<S> <C> <C> <C>
Accumulated postretirement benefits obligation:
Retirees $ 1,199 $ 1,174 $ 2,373
Fully eligible active participants 322 421 743
Other active participants 1,682 708 2,390
--------------------------------------------------
Total accumulated postretirement benefits obligation 3,203 2,303 5,506
Unrecognized transition obligation 2,293 1,050 3,343
Unrecognized prior service cost - 133 133
Unrecognized net (gain) loss (613) 172 (441)
--------------------------------------------------
Accrued postretirement obligation $ 1,523 $ 948 $ 2,471
==================================================
December 31, 1996:
Accumulated postretirement benefits obligation:
Retirees $ 1,783 $ 1,014 $ 2,797
Fully eligible active participants 199 343 542
Other active participants 1,603 552 2,155
--------------------------------------------------
Total accumulated postretirement benefits obligation 3,585 1,909 5,494
Unrecognized transition obligation 2,446 1,121 3,567
Unrecognized prior service cost - 139 139
Unrecognized net gain (98) (18) (116)
--------------------------------------------------
Accrued postretirement obligation $ 1,237 $ 667 $ 1,904
==================================================
</TABLE>
- 37 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
9. Postretirement Healthcare and Life Insurance Benefits (continued)
Net periodic postretirement benefit costs included the following:
<TABLE>
<CAPTION>
Health Life
Care Insurance Total
--------------------------------------------------
(In thousands)
<S> <C> <C> <C>
1997:
Service cost - benefits earned during the period $ 44 $ 21 $ 65
Interest cost 217 148 365
Amortization 126 92 218
--------------------------------------------------
Net periodic postretirement benefit cost $ 387 $ 261 $ 648
==================================================
1996:
Service cost - benefits earned during the period $ 47 $ 20 $ 67
Interest cost 251 136 387
Amortization 205 86 291
--------------------------------------------------
Net periodic postretirement benefit cost $ 503 $ 242 $ 745
==================================================
1995:
Service cost - benefits earned during the period $ 52 $ 14 $ 66
Interest cost 264 121 385
Amortization 151 58 209
--------------------------------------------------
Net periodic postretirement benefit cost $ 467 $ 193 $ 660
==================================================
</TABLE>
For measuring the postretirement benefit obligation, a 9.5% annual rate of
increase in the net medical claims cost was assumed. The rate was assumed to
decrease gradually to 5.5% in 2005 and remain at that level thereafter. Retiree
contributions were assumed to increase at the same rates as the annual rate of
increase in the net medical claims cost. In addition, it was assumed that the
retirees would continue to pay for all Medicare Part B premiums. Increasing the
annual rate of increase in the net medical claims cost by one percentage point
in each year would increase the accumulated postretirement benefit obligation by
$154,000 and would increase the service cost and interest cost components of net
periodic postretirement benefit cost by $4,000 and $11,000, respectively. The
discount rate used in determining the accumulated postretirement benefit
obligation was 7% and 7.5% in 1997 and 1996, respectively. The change in the
discount rate increased the accumulated postretirement benefit obligation at
December 31, 1997 by approximately $380,000.
The unrecognized transition obligation is being amortized on a straight-line
basis over 20 years. Unrecognized gains and losses are amortized on a
straight-line basis over the average remaining service period of active
participants.
- 38 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
10. Related Party Transactions
The Company previously received advances from two of its shareholders. There
were no amounts outstanding at December 31, 1997 ($1,500,000 outstanding at
December 31, 1996). This debt was repaid in January 1997.
The Company and an affiliate share common insurance coverage for aircraft and
space liabilities, contingent liabilities and excess liabilities greater than
$10 million but less than $50 million. The Company is charged a pro rata premium
based on the net sales of the covered parties. The Company was charged $165,000,
$212,000 and $200,000 for the years ended December 31, 1995, 1996 and 1997,
respectively.
During 1997, The Company and one of its shareholders entered into a Managerial
Assistance Agreement, whereby the shareholder provides the Company with
information and advice regarding the management of its existing business and the
expansion of the Company's business into new products and markets. Under the
agreement, which is cancellable upon 30 days written notice, the Company is
required to pay the shareholder a pre-established monthly fee and to reimburse
the shareholder for expenses. The Company was charged $360,000 in connection
with this agreement during 1997.
11. Income Taxes
Deferred income taxes are recognized for the tax consequences of temporary
differences between the financial statement carrying amounts and the tax bases
of existing assets and liabilities by applying enacted statutory rates
applicable to future years to the differences. The effect of a change in tax
rates is recognized in the period that includes the enactment date.
Income tax expense (benefit) consists of the following:
Year ended December 31
1995 1996 1997
---------------------------------------
Current:
Federal $ 250 $ 3,793 $ 11,665
State 104 182 1,270
---------------------------------------
354 3,975 12,935
Deferred - (4,071) 584
---------------------------------------
$ 354 $ (96) $ 13,519
=======================================
- 39 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
11. Income Taxes (continued)
Income tax expense (benefit) differs from the amount computed by applying the
statutory income tax rate as follows:
<TABLE>
<CAPTION>
Year ended December 31
1995 1996 1997
-----------------------------------------------------
(In thousands)
<S> <C> <C> <C>
Income before income taxes at 34% in 1995,
35% in 1996 and 1997 $ 2,570 $ 6,645 $ 12,782
Permanent income tax disallowances 23 59 64
State taxes, net of federal benefit 68 118 1,321
Benefit of foreign sales corporation - - (700)
Benefit of Federal net operating loss
carryforwards previously reserved (2,057) (1,122) -
Benefit of Federal AMT and other credit
carryforwards previously reserved (250) (1,997) -
Elimination of valuation allowance - (3,735) -
Other - (64) 52
-----------------------------------------------------
$ 354 $ (96) $ 13,519
=====================================================
</TABLE>
Deferred tax liabilities and assets are recorded in the Company's balance sheets
as follows:
December 31
1996 1997
----------------------------------------
(In thousands)
Deferred tax liabilities:
Property, plant and equipment $ (1,804) $ (1,743)
Other (12) (64)
----------------------------------------
Gross deferred tax liabilities (1,816) (1,807)
Deferred tax assets:
AMT credit carryforward $ 310 $ -
New York State investment tax credit
carryforward 854 365
Accrued liabilities 3,197 3,087
Employee retirement plans 1,869 1,896
Other 324 452
---------------------------------------
Gross deferred tax assets 6,554 5,800
---------------------------------------
Net deferred taxes $ 4,738 $ 3,993
=======================================
The valuation allowance at December 31, 1994 and 1995 was $11,333,000 and
$8,041,000, respectively.
- 40 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
12. Other Long-Term Liabilities
Other long-term liabilities consist of the following:
December 31
1996 1997
----------------------------------------
(In thousands)
Pension obligation $ 3,046 $ 3,073
Post retirement benefits obligation 1,904 2,471
Environmental reserves 3,466 3,966
Other 158 139
----------------------------------------
$ 8,574 $ 9,649
========================================
13. Fair Value of Financial Instruments
Forward Purchase Contracts
As part of its risk management strategy, the Company purchases forward contracts
to manage its exposure to changes in nickel prices. The contracts mature
principally in 1998. At December 31, 1997, the Company had open purchase
contracts with a notional principal value of approximately $12,740,000. The fair
value of the material covered by these contracts, based on the December 31, 1997
price quoted on the London Metal Exchange, was approximately $10,828,000. At
December 31, 1997, substantially all of the forward contracts were designated
and were effective as hedges for firm price sales agreements the Company had
entered into. Unrealized gains and losses on these forward contracts have been
deferred. Unrealized losses on forward contracts not designated or effective as
hedges, totaling approximately $283,000, have been recognized in income
currently.
Fair Value Disclosure
The carrying amounts reported in the Company's balance sheets for cash and cash
equivalents approximate fair value. The carrying amounts reported in the
Company's balance sheets for long-term debt, including current portion, and
subordinated notes payable to affiliates approximate fair value, as the
underlying long-term debt instrument is comprised of notes that are repriced on
a short-term basis, and the subordinated notes carry a variable-rate interest
which is adjusted on a short-term basis.
- 41 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
14. Business Segment Information
The Company considers its operations to be one industry segment, specialty
metals. All significant operations are in the United States. Total export sales,
by geographic area, were as follows:
Year ended December 31
1995 1996 1997
--------------------------------------------------
(In thousands)
Europe $ 37,105 $ 35,528 $ 51,688
Middle East 7,083 5,188 4,374
Other 2,442 4,121 1,762
--------------------------------------------------
$ 46,630 $ 44,837 $ 57,824
==================================================
15. Statement of Cash Flow - Supplemental Disclosures
The Company's actual cash payments (receipts) for interest and income taxes were
$4,090,000 and ($2,000), respectively, for the year ended December 31, 1995,
$5,616,000 and $4,198,000, respectively, for the year ended December 31, 1996,
and $750,000 and $12,570,000, respectively, for the year ended December 31,
1997.
Non-cash activities:
Year ended December 31
1995 1996 1997
--------------------------------------------
(In thousands)
Intangible pension asset $ (160) $ (10) $ 138
Accumulated pension adjustment 526 (28) (201)
Deferred taxes - 465 (161)
--------------------------------------------
Net accrued pension liability $ 366 $ 427 $ (224)
============================================
During 1996, the Company acquired $49,000 of fixed assets which were directly
offset by capital lease liabilities.
- 42 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
16. Commitments and Contingencies
Environmental
The Company is subject to loss contingencies pursuant to various federal, state
and local environmental laws, and is currently involved in several actions
regarding the clean-up of disposal sites alleged to contain hazardous and/or
toxic wastes generated over a number of years including the following.
The Company, with contribution from other parties, performed remedial actions at
a site in Clayville, New York (the "Ludlow Landfill"). Except for adjoining
property known as the "North Gravel Pit," the New York State Department of
Environmental Conservation ("DEC") has advised the Company that all work
performed to date is acceptable. Notwithstanding the fact that the remediation
work has been completed the DEC may seek a post-excavation claim for biota
monitoring, which is an environmental assessment procedure. This claim is not
anticipated to be material. The Company is also responsible for operation and
maintenance costs for a period of 30 years, which began in 1997. The costs for
this are estimated to be approximately $150,000 per year in years one and two,
and approximately $90,000 in the remaining years. The total estimated costs of
approximately $2.8 million have been discounted at an annual rate of 4% in the
accompanying financial statements. The Company may also be required to perform
contingent post-closure activities. It is not possible to determine which, if
any, of the contingent activities the Company will need to perform.
Contamination has also been discovered at the North Gravel Pit site. A study was
completed in 1997 to determine the extent of the contamination and to select an
appropriate remedial alternative. Based on this study, the Company has developed
a remediation plan for the site which the Company plans to submit to the DEC for
approval in the first quarter of 1998. The Company anticipates that it will be
responsible for operation and maintenance costs for an extended period following
the remediation. Based upon information available, the Company estimates the
total cost of remediation to be $1.7 million. The Company has reserved a total
of approximately $3.2 million with respect to the Ludlow Landfill and North
Gravel Pit.
- 43 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
16. Commitments and Contingencies (continued)
Environmental (continued)
The Company is also involved in a site in Utica, New York which is alleged to be
contaminated. In the mid 1980s, the owner/s/operators of Universal Waste in
Utica, New York (the "Universal Waste Site") were cited by the DEC in a formal
enforcement proceeding for cleanup of the site which was allegedly contaminated.
The owner of the Universal Waste Site requested by motion that the Company be
named as an indispensable party to that proceeding. The DEC, however, took the
position that the Company should not be named as an indispensable party. The
Company believes that at least four other potentially responsible parties have
been identified with respect to the contamination at the site. A consent order
has been executed obligating the site operator to conduct a preliminary site
assessment on a portion of the property. The preliminary site assessment is
underway. The DEC is also conducting a separate preliminary site assessment. The
Company is presently not involved in investigating the alleged contamination.
Based upon the limited information available to its environmental engineers, the
Company has established a reserve of $575,000. However, because of the
preliminary nature of the investigation, it is not possible, at this time, to
provide a reasonable estimate as to the ultimate cost of any investigative or
remedial work which will be required, or the Company's share, if any, of such
costs.
The Company is on notice of, and involved in, certain other environmental
matters which have been settled or are at various stages of discussion,
negotiation or settlement which the Company does not believe to be material.
Although the Company believes that it is in substantial compliance with
applicable requirements of environmental laws, there can be no assurance that
some, or all, of the risks noted previously will not result in liabilities that
are material to the Company's business, results of operations, financial
positions, or cash flows.
Other
From time to time, the Company is involved in legal proceedings relating to
claims arising out of its operations in the normal course of business. The
Company does not believe that it is a party to any proceedings at the present
time that could have a material adverse effect on the business, financial
condition, results of operations or cash flows of the Company.
- 44 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
17. Major Customers
For the year ended December 31, 1995, sales made to the Company's three largest
customers represented approximately 17%, 11% and 10%, respectively, of the
Company's total sales. For the year ended December 31, 1996, sales made to the
Company's three largest customers represented approximately 18%, 13% and 11%,
respectively, of the Company's total sales. For the year ended December 31,
1997, sales made to the Company's three largest customers represented
approximately 21%, 11%, and 10%, respectively, of the Company's total sales. No
other customers, in any year, represented over 10% of the Company's total sales.
At December 31, 1996, accounts receivable from three customers represented
approximately 45% of total accounts receivable. At December 31, 1997, accounts
receivable from three customers represented approximately 37% of total accounts
receivable. No other customers accounted for over 10% of the Company's total
accounts receivable at December 31, 1996 and 1997.
18. Equity Appreciation Rights Plan
The Company has an Equity Appreciation Rights Plan ("Rights Plan") which
provides for the grant of rights to receive cash payments based on the
appreciation of the book value of the Company, as defined ("Rights"). Rights may
generally be exercised from the fifth anniversary of the date of grant through
the tenth anniversary of the date of grant, or earlier in the event of a change
in control, termination without cause, retirement, death or disability. Rights
are forfeited in the event the holder is terminated by the Company for cause, as
defined. Each Right is based on the total book value of the Company at the date
of grant, divided by 10,000,000 and appreciation is calculated using aggregate
after tax profits after the date of grant. At December 31, 1996 and 1997, 50,000
Rights were outstanding, of which 20,000 and 30,000, respectively, were
currently exercisable. As of December 31, 1997, the Company had accrued $150,000
for amounts earned under the Rights Plan.
- 45 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
19. Earnings per Share
The following table sets forth the computation of basic and diluted earnings per
share:
<TABLE>
<CAPTION>
1995 1996 1997
---------------------------------------------------
(In thousands, except per share amounts)
<S> <C> <C> <C>
Numerator:
Net income $ 7,205 $ 19,081 $ 23,002
Denominator:
Denominator for basic earnings per share -
weighted-average shares outstanding 12,400 12,400 15,004
Effect of dilutive securities:
Employee stock options - - 12
---------------------------------------------------
Denominator for diluted earnings per
share - adjusted weighted-average shares 12,400 12,400 15,016
===================================================
Basic earnings per share $ 0.58 $ 1.54 $ 1.53
===================================================
Diluted earnings per share $ 0.58 $ 1.54 $ 1.53
===================================================
</TABLE>
20. Capital Stock
Effective February 26, 1997, the Company sold 3,075,000 shares of its common
stock at $16.50 per share in an initial public offering. Proceeds from the
offering, net of commissions and other related expenses totaling approximately
$4.8 million, were approximately $46.0 million. The proceeds were used primarily
to reduce the Company's outstanding indebtedness.
- 46 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
21. Stock Options and Restricted Stock
During the quarter ended March 31, 1997, the Company adopted the Special Metals
Corporation 1997 Long-Term Stock Incentive Plan (the "Stock Incentive Plan"). In
connection with the Stock Incentive Plan, 800,000 shares of the Company's common
stock were reserved for the grant of stock options, stock appreciation rights,
restricted stock, performance awards, and other stock-based awards to certain
key employees and certain directors. During 1997, the Company granted 295,500
options at an excercise price of $16.50 per share which was the market value on
the grant date. The options become exercisable at a rate of 50% on the second
anniversary of the date of grant, 25% on the third anniversary of the date of
grant, and 25% on the fourth anniversary of the date of grant. The options
expire 10 years from the date of grant. At December 31, 1997, all options
granted were outstanding. No awards shall be granted under the Stock Incentive
Plan after December 31, 2007.
The Company has chosen to continue to account for stock-based compensation using
the intrinsic value based method of accounting as prescribed by APB 25. Under
APB 25, because the exercise price of the Company's employee stock options
equals the market price of the underlying stock on the grant date, no
compensation cost is recognized. SFAS 123 requires companies that do not adopt
the new fair value accounting rules to disclose pro forma net income and
earnings per share under the new method. The fair value of each option on the
date of grant was $7.62, which was estimated at the date of grant using a
Black-Scholes option pricing model with the following weighted-average
assumptions: risk free interest rate of 6%, dividend yield of 0%, volatility
factor of the expected market price of the Company's common stock of .364, and a
weighted-average expected life of the option of 6 years. If the fair value based
method accounting provisions of SFAS 123 had been adopted at the beginning of
1997, net income and earnings per share (both basic and diluted) would have been
$22,697,000 and $1.51, respectively. The effects of applying SFAS 123 for
providing pro forma disclosures are not likely to be representative of the
effects on reported net income for future years.
On July 24, 1997, the Company awarded 2,000 shares of restricted stock to two
executive officers under the Stock Incentive Plan at a purchase price of $0 per
share. The weighted-average grant-date fair value of those shares granted was
$18.00 per share.
- 47 -
<PAGE>
Special Metals Corporation
Notes to Financial Statements (continued)
22. Quarterly Financial Data (unaudited)
The following is a summary of the quarterly results of operations for the years
ended December 31, 1997 and 1996:
<TABLE>
<CAPTION>
Fiscal Quarter
First Second Third Fourth
------------------------------------------------------------------
(In thousands, except per share amounts)
Year ended December 31, 1997:
<S> <C> <C> <C> <C>
Net Sales $ 47,424 $ 46,780 $ 44,168 $ 47,700
Gross Profit 11,395 11,071 10,559 11,017
Net Income 5,597 6,084 5,625 5,696
Earnings per common share,
basic and assuming dilution 0.41 0.39 0.36 0.37
Year ended December 31, 1996:
Net Sales $ 39,639 $ 43,727 $ 37,174 $ 41,760
Gross Profit 6,211 7,907 6,689 7,665
Net Income 2,923 4,009 8,957 3,192
Earnings per common share,
basic and assuming dilution 0.24 0.32 0.72 0.26
</TABLE>
- 48 -
<PAGE>
Schedule II - Valuation and Qualifying Accounts
Dollars in Thousands
<TABLE>
<CAPTION>
Additions
-----------------------------
Balance at Charged to
Beginning of Charged to Other Balance at
Description Period Expense Accounts Deductions End of Period
- ----------------------------------------------------------------------------------------------------------------------------
<S> <C> <C> <C> <C> <C>
Year ended December 31, 1997:
Deducted from asset accounts:
Allowance for doubtful accounts $ 120 $ 48 $ - $ - $ 168
Allowance for obsolescence 1,110 261 - 74(b) 1,297
------------------------------------------------------------------------------
Total $ 1,230 $ 309 $ - $ 74 $ 1,465
==============================================================================
Year ended December 31, 1996:
Deducted from asset accounts:
Allowance for doubtful accounts $ 100 $ 69 $ - $ 49(a) $ 120
Allowance for obsolescence 969 350 - 209(b) 1,110
------------------------------------------------------------------------------
Total $ 1,069 $ 419 $ - $ 258 $ 1,230
==============================================================================
Year ended December 31, 1995:
Deducted from asset accounts:
Allowance for doubtful accounts $ 75 $ 41 $ - $ 16(a) $ 100
Allowance for obsolescence 1,377 143 - 551(b) 969
------------------------------------------------------------------------------
Total $ 1,452 $ 184 $ - $ 567 $ 1,069
==============================================================================
</TABLE>
(a) Uncollectible accounts written off, net of recoveries
(b) Obsolete inventory disposals, physical inventory adjustments, and
adjustments for material reclaimed or ultimately sold.
Item 9 - Changes in and Disagreements with Accountants on Accounting and
Financial Disclosure
None.
- 49 -
<PAGE>
PART III
Item 10 - Directors and Executive Officers of the Registrant
The information regarding Directors and Executive Officers of the
Company will be included in the Company's definitive Proxy Statement to be filed
with the Commission prior to April 30, 1998.
Item 11 - Executive Compensation
The information regarding Executive Compensation will be included in
the Company's definitive Proxy Statement to be filed with the Commission prior
to April 30, 1998.
Item 12 - Security Ownership of Certain Beneficial Owners and Management
The information regarding Security Ownership of Certain Beneficial
Owners and Management will be included in the Company's definitive Proxy
Statement to be filed with the Commission prior to April 30, 1998.
Item 13 - Certain Relationships and Related Transactions
The information regarding Certain Relationships and Related
Transactions will be included in the Company's definitive Proxy Statement to be
filed with the Commission prior to April 30, 1998.
- 50 -
<PAGE>
PART IV
Item 14 - Exhibits, Financial Statement Schedules and Reports on Form 8-K
Page in
Form 10-K
---------
(a) The following documents are filed as part of this report:
(1) Audited financial statements of the Company as of December
31, 1996 and 1997, and for the three years in the period
ended December 31, 1997 20
(2) Financial statement schedule
II - Valuation and Qualifying Accounts 49
All other schedules have been omitted as the required
information is not applicable or the information is
presented in the financial statements or the notes thereto.
(3) Exhibits
Exhibit No. Description
- --------------------------------------------------------------------------------
3.1 * Amended and Restated Certificate of Incorporation of the Company
3.2 * Amended and Restated By-Laws of the Company
4.1 * Credit Agreement, dated as of October 18, 1996, among the Company,
Credit Lyonnais New York Branch ("Credit Lyonnais") and the
institutions from time to time party thereto
4.2 ** First Amendment to Credit Agreement dated as of April 15, 1997 by
and among the Company, Credit Lyonnais New York Branch ("Credit
Lyonnais") and the financial institutions party thereto
4.3 **** Second Amendment to Credit Agreement dated as of October 7, 1997
by and among the Company, Credit Lyonnais New York Branch
("Credit Lyonnais") and the financial institutions party thereto
10.1 * Form of Registration Rights Agreement among the Company, SIMA, LWH
and AMI
10.2 * Amended and Restated Stockholders Agreement among the Company,
SIMA, LWH and AMI
10.3 * Technical Exchange Agreement between the Company and SIMA
10.4 * Managerial Assistance Agreement between the Company and SIMA
10.5 * Subordination Agreement, dated as of October 18, 1996, among the
Company, SIMA and Credit Lyonnais
10.6 * Lease Agreement, dated as of February 1, 1994 between the Oneida
County Development Agency and the Company
10.7 *** Lease Extension and Modification Agreement, dated as of February
28, 1997, by and between the Oneida County Industrial Development
Agency and the Company
10.8 *** Amended and Restated Payment in Lieu of Taxes Agreement, dated
February 28, 1997, by and between the Oneida County Industrial
Development Agency and the Company
- 51 -
<PAGE>
Exhibit No. Description
- --------------------------------------------------------------------------------
10.9 First Amendment to Amended and Restated Payment in Lieu of Taxes
Agreement, dated January 22, 1998, by and between the Oneida
County Industrial Development Agency and the Company
10.10 * Lease, dated as of November 1, 1990 between the County of
Chautauqua Industrial Development Agency and the Company
10.11 * Payment in Lieu of Taxes Agreement, dated as of November 1, 1990
between the Company and the County of Chautauqua Industrial
Development Agency
10.12 * Amended and Restated Lease Agreement, dated as of September 1,
1990 between the City of Princeton, Kentucky and the Company
10.13 * Special Metals Corporation Equity Appreciation Rights Plan
10.14 * Special Metals Corporation Supplemental Retirement Income Plan
10.15 * Special Metals Corporation 1997 Long-Term Stock Incentive Plan,
together with Form of Stock Option Award Agreement
10.16 * Amended and Restated Employment Agreement, dated December 30,
1994, between the Company and Donald R. Muzyka
10.17 * Amended and Restated Employment Agreement, dated December 30,
1994, between the Company and Robert F. Dropkin
10.18 * Employment Agreement, dated January 4, 1988, between the Company
and Gernant E. Maurer, as amended
10.19 * Employment Agreement, dated December 30, 1994, between the Company
and Donald C. Darling
10.20 * Severance Agreement, dated December 30, 1994, between the Company
and J. D. Page
10.21 * Severance Agreement, dated December 30, 1994, between the Company
and T. E. MacDonald
21.1 Subsidiaries of the Company
23.1 Consent of Ernst & Young LLP
27.1 Financial Data Schedule
- --------------------------
* Incorporated by reference to the exhibits filed with the Company's
Registration Statement on Form S-1 (File No. 333-18499)
** Incorporated by reference to the Company's Quarterly Report on Form 10-Q
for the quarter ended March 31, 1997
*** Incorporated by reference to the Company's Quarterly Report on Form 10-Q
for the quarter ended June 30, 1997
**** Incorporated by reference to the Company's Quarterly Report on Form 10-Q
for the quarter ended September 30, 1997
(b) Reports on Form 8-K
None.
(c) Exhibits
All exhibits required by Item 601 of Regulation S-K are included in Item
14(a)(3).
- 52 -
<PAGE>
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities
Exchange Act of 1934, the Registrant has duly caused this report to be signed on
its behalf by the undersigned, thereunto duly authorized on March 10, 1998.
By: /s/ Donald R. Muzyka
------------------------
Donald R. Muzyka, President and
Chief Executive Officer
BE IT KNOWN TO ALL BY THESE PRESENTS, that each person whose signature
appears below constitutes and appoints Donald C. Darling and Donald R. Muzyka
such person's true and lawful attorney-in-fact and agents, with full power of
substitution and revocation, for such person and in such person's name, place
and stead, in any and all capacities to sign any and all amendments to this
report filed pursuant to the requirements of Section 13 or 15(d) of the
Securities Act of 1934, as amended, and to file the same with all exhibits
thereto, and the other documents in connection therewith, with the Securities
and Exchange Commission, granting unto said attorneys-in-fact and agents, and
each of them, full power and authority to do and perform each and every act and
thing requisite and necessary to be done, as fully to all intents and purposes
as such persons might or could do in person, hereby ratifying and confirming all
that said attorneys-in-fact and agents, or any of them, or their substitute or
substitutes, may lawfully do or cause to be done by virtue hereof.
Pursuant to the requirements of Section 13 or 15(d) of the Securities
Exchange Act of 1934, this report has been signed below by the following persons
on behalf of the Registrant and in the capacities and on the dates indicated.
/s/ Robert D. Halverstadt
- -------------------------
Robert D. Halverstadt Chairman of the Board March 10, 1998
/s/ Donald R. Muzyka
- --------------------
Donald R. Muzyka President, Chief Executive Officer and March 10, 1998
Director (Principal Executive Officer)
/s/ Donald C. Darling
- ---------------------
Donald C. Darling Chief Financial Officer and Director March 10, 1998
(Principal Financial and Accounting Officer)
/s/ Robert F. Dropkin
- ---------------------
Robert F. Dropkin Director March 10, 1998
/s/ Edouard Duval
- -----------------
Edouard Duval Director March 10, 1998
/s/ Antoine G. Treuille
- -----------------------
Antoine G. Treuille Director March 10, 1998
/s/ Raymond F. Decker
- ---------------------
Raymond F. Decker Director March 10, 1998
- 53 -
Exhibit 21.1
Subsidiaries
Jurisdicition of
Name Organization
- ---- ----------------
Udimet Special Metals ltd. United Kingdom
Special Metals Foreign Sales Corporation Barbados
Exhibit 23.1
CONSENT OF ERNST & YOUNG LLP
We consent to the incorporation by reference in the Registration Statement
(Form S-8 No. 333-26067) pertaining to the Special Metals Corporation 1997
Long-Term Stock Incentive Plan of our report dated January 30, 1998, with
respect to the financial statements and schedule of Special Metals Corporation
included this Annual Report (Form 10-K) for the year ended December 31, 1997.
/s/ Ernst & Young LLP
---------------------
Buffalo, New York
March 4, 1998
- 54 -
<TABLE> <S> <C>
<ARTICLE> 5
<LEGEND>
This schedule contains summary financial information extracted from the
Condensed Financial Statements contained in the Annual Report to which this
schedules relates and is qualified in its entirety by reference to such
financial statements.
</LEGEND>
<CIK> 0001028965
<NAME> SPECIAL METALS CORPORATION
<MULTIPLIER> 1,000
<S> <C>
<PERIOD-TYPE> 12-MOS
<FISCAL-YEAR-END> DEC-31-1997
<PERIOD-START> JAN-01-1997
<PERIOD-END> DEC-31-1997
<CASH> 13,398
<SECURITIES> 0
<RECEIVABLES> 25,595
<ALLOWANCES> (168)
<INVENTORY> 50,580
<CURRENT-ASSETS> 96,781
<PP&E> 80,242
<DEPRECIATION> (40,515)
<TOTAL-ASSETS> 141,750
<CURRENT-LIABILITIES> 27,956
<BONDS> 174
0
0
<COMMON> 155
<OTHER-SE> 103,816
<TOTAL-LIABILITY-AND-EQUITY> 141,750
<SALES> 186,071
<TOTAL-REVENUES> 186,071
<CGS> 142,029
<TOTAL-COSTS> 142,029
<OTHER-EXPENSES> 0
<LOSS-PROVISION> 48
<INTEREST-EXPENSE> 670
<INCOME-PRETAX> 36,521
<INCOME-TAX> 13,519
<INCOME-CONTINUING> 23,002
<DISCONTINUED> 0
<EXTRAORDINARY> 0
<CHANGES> 0
<NET-INCOME> 23,002
<EPS-PRIMARY> 1.53
<EPS-DILUTED> 1.53
</TABLE>
