NEW YORK STATE ELECTRIC & GAS CORP
10-K405, 2000-03-28
ELECTRIC & OTHER SERVICES COMBINED
Previous: NEW YORK STATE ELECTRIC & GAS CORP, 10-K405, 2000-03-28
Next: NEW YORK STATE ELECTRIC & GAS CORP, 10-K405, 2000-03-28

Exhibit 10-1

 

 

AGREEMENT BETWEEN NEW YORK

INDEPENDENT SYSTEM OPERATOR AND

TRANSMISSION OWNERS

 

 

 

Table of Contents

ARTICLE 1.0:

DEFINITIONS

3

ARTICLE 2.0:

RESPONSIBILITIES OF THE TRANSMISSION OWNERS

3

ARTICLE 3.0:

RESPONSIBILITIES OF THE ISO

8

ARTICLE 4.0:

ASSIGNMENT

16

ARTICLE 5.0:

LIMITATION OF LIABILITY AND INDEMNIFICATION

16

ARTICLE 6.0:

OTHER PROVISIONS

19

APPENDIX A-1

 

28

APPENDIX A-2

 

34

 

 

 

 

 

 

AGREEMENT BETWEEN
NEW YORK INDEPENDENT SYSTEM OPERATOR
AND
TRANSMISSION OWNERS

     This Agreement is made as of the ____ day of __________, 1999, by and among Central Hudson Gas & Electric Corporation, Consolidated Edison Company of New York, Inc., New York State Electric & Gas Corporation, Niagara Mohawk Power Corporation, Orange and Rockland Utilities, Inc., Rochester Gas and Electric Corporation (referred to collectively as the "Investor-Owned Transmission Owners"), the Power Authority of the State of New York ("NYPA"), a corporate municipal instrumentality of the State of New York, and LIPA (a subsidiary of the Long Island Power Authority, a corporate municipal instrumentality of the State of New York)(herein referred to collectively as the "Transmission Owners") and the New York Independent System Operator ("ISO"), a not-for-profit corporation. The Transmission Owners and the ISO are herein referred to collectively as the Parties.

WITNESSETH:

     WHEREAS, the Investor-Owned Transmission Owners established the New York Power Pool ("NYPP") by agreement made as of the 21st day of July, 1966, and NYPA subsequently joined NYPP on October 11, 1967, and LIPA joined the NYPP on May 28, 1998; and
     WHEREAS, the Transmission Owners have created, invested in and operated the interconnected transmission facilities in New York State and each Investor-Owned Transmission Owner has fiduciary responsibilities to assure, among other things, the receipt of adequate revenues to maintain the facilities, a reasonable rate of return on its transmission facilities, and to provide for recovery of the capital invested in its transmission facilities; and
     WHEREAS, the ISO's principal mission is to maintain the integrity and reliability of the interconnected transmission facilities of the Transmission Owners, which will require the ISO to exercise Operational Control of the transmission facilities of the Transmission Owners, referred to as "Transmission Facilities Under ISO Control," and will further require the ISO, among other things, to function as the successor to NYPP with respect to certain NYS Power System operational activities heretofore conducted by NYPP; and
     WHEREAS, the Investor-Owned Transmission Owners have legal obligations to provide safe and reliable service to the public, including assuring suitable use of their individual transmission facilities to attain and maintain compliance with this obligation; and
     WHEREAS, the Transmission Owners will continue to own, physically operate, modify, and maintain the Transmission Facilities Under ISO Operational Control, and the Investor-Owned Transmission Owners will continue to have fiduciary obligations to their investors to protect their transmission facilities and to protect their investors from liability that may result from the operation of those facilities;
     NOW, THEREFORE, in consideration of the premises and the mutual covenants and agreements set forth herein, the Parties do hereby agree with each other, for themselves and their successors and assigns, as follows:

ARTICLE 1.0:  DEFINITIONS

      1.01    The definitions contained in Article 1 of the Independent System Operator Agreement ("ISO Agreement") as it existed on the date this Agreement is signed by the Parties are hereby incorporated by reference in their entirety into this Agreement. Modifications to such definitions under the ISO Agreement shall apply to this Agreement, only if the Parties to this Agreement agree in writing pursuant to Section 6.14 below.

ARTICLE 2.0:  RESPONSIBILITIES OF THE TRANSMISSION OWNERS

2.01    Transmission Facilities.  The Transmission Owners have specified transmission facilities over which the ISO will have day-to-day Operational Control. These facilities shall be collectively known as the "Transmission Facilities Under ISO Operational Control," and are listed in Appendix A-1. The Transmission Owners also will be responsible for providing notification to the ISO with respect to actions related to other specified transmission facilities. These facilities shall be collectively known as "Transmission Facilities Requiring ISO Notification," and are listed in Appendix A-2. Transmission facilities may be added to, or deleted from, the lists of facilities provided in Appendices A-1 and A-2 by mutual written agreement of the ISO and the Transmission Owner owning and controlling such facilities. A current version of such list will be posted on the ISO's OASIS.

2.02    Transmission System Operation.  Each Transmission Owner shall operate and maintain its facilities that are designated as Transmission Facilities Under ISO Operational Control and Transmission Facilities Requiring ISO Notification in accordance with the terms of this Agreement and in accordance with all Reliability Rules and all other applicable operating instructions, and ISO Procedures. The Operating Committee of the ISO will promulgate procedures to provide for the assumption of authority by the Transmission Owners' control centers to respond to an Emergency. These procedures shall provide for the coordination of such response with the ISO. The procedures will provide that, in situations where immediate action is required, the Transmission Owners' control centers will have the authority to take actions, including without limitation, the following:

1.      exercising control over facilities listed in Appendix A-1 of this Agreement and generating units;

2.     starting quick start generation and the adjustment of generation;

3.     re-energizing transmission facilities following breaker trips;

4.     implementing emergency Load Shedding and voltage reduction measures and subsequent restoration;

5.     voltage/VAR control during an Emergency;

6.     changing ratings of transmission facilities; and

7.     taking other measures consistent with Good Utility Practice that are required to respond to the Emergency.

     Until the Operating Committee promulgates such procedures, the Transmission Owners will exercise the above responsibilities during an Emergency.

2.03    Local Area Transmission System Facilities.  Transmission system facilities not designated as Transmission Facilities Under ISO Operational Control or as Transmission Facilities Requiring ISO Notification shall be collectively known as "Local Area Transmission System Facilities." Each Transmission Owner shall have sole responsibility for the operation of its Local Area Transmission System Facilities, provided, however, that such operation by each Transmission Owner shall not compromise the reliable and secure operation of the NYS Transmission System. Each Transmission Owner shall promptly comply to the extent practicable with a request from the ISO to take action with respect to coordination of the operation of its Local Area Transmission System Facilities.

2.04    Safe Operations.  Notwithstanding any other provision of this Agreement, a Transmission Owner may take such action with respect to the operation of its facilities as it deems necessary to maintain Safe Operations. To ensure Safe Operations, all Transmission Owner local operating rules shall govern the connection and disconnection of generation with transmission facilities. Safe Operations include the application and enforcement of rules, procedures and protocols that are intended to ensure the safety of personnel operating or performing work or tests on transmission facilities.

2.05    Local Control Center, Metering and Telemetry.  Each Transmission Owner shall operate, or arrange for a suitable third party to operate, on a twenty-four (24) hour basis, a suitable control center, and shall install and maintain all other equipment and facilities reasonably required for the ISO to exercise Operational Control over Transmission Facilities Under ISO Operational Control. Operation of the NYS Power System will be a cooperative effort coordinated by the ISO control center in conjunction with each Transmission Owner's control center and will require the exchange of all reasonably necessary information. The Transmissions Owners' control centers must provide the ISO with Supervisory Control and Data Acquisition ("SCADA") information on facilities listed in Appendices A-1 and A-2 as well as on certain generation resources in their Transmission Districts.

     Each Transmission Owner shall have the responsibility for providing metering data in its Transmission District to the ISO, unless other parties are authorized by the appropriate regulatory authority to provide metering data. Each Transmission Owner shall be responsible for collecting and making available to the ISO billing quality metering data and any other information for the Transmission District required by the ISO for billing purposes. The Parties agree that the metering and data acquisition systems currently in place will be acceptable for initial ISO operation. The Transmission Owner shall cooperate with the ISO in implementing reasonable metering enhancements and new metering installations that the ISO may deem necessary, provided that mechanisms satisfactory to each Transmission Owner are in place for their recovery of all associated costs. Each Transmission Owner shall continue to receive telemetry from existing Generators in its Transmission District and provide for the receipt of such information from new Generators. Automatic Generation Control ("AGC") will be implemented via each Transmission Owner's control center. Each Transmission Owner shall operate its control center to comply with current AGC procedures, as well as any revised or new AGC procedures reasonably adopted by the ISO. In addition, each Transmission Owner shall provide backup control services to the ISO in the event the ISO's computer systems malfunction. In such situations, Bid curves will be made available to the Transmission Owners' control centers to facilitate the continued economic operation of the system. Each Transmission Owner will maintain a strict Code of Conduct to prevent such information from reaching any unauthorized person or entity.     

2.06    Security Constrained Unit Commitment Adjustments.  A Transmission Owner may request commitment of additional Generators (including specific output level(s)) if it determines that an additional Generator is needed to ensure local area reliability. The ISO will use Supplemental Resource Evaluation ("SRE") to fulfill a Transmission Owner's request for additional units.

2.07    Design, Maintenance and Rating Capabilities.  Each Transmission Owner shall comply with the provisions of this Agreement and all Reliability Rules, ISO Procedures, and Good Utility Practice with respect to the design, maintenance and rating the capabilities of NYS Transmission System facilities.

2.08    Maintenance Scheduling.  The Transmission Owners shall schedule maintenance of their facilities designated as Transmission Facilities Under ISO Operational Control and schedule any outages (other than forced transmission outages) of said transmission system facilities in accordance with outage schedules approved by the ISO. The Transmission Owners shall comply with maintenance schedules coordinated by the ISO, pursuant to this Agreement, for Transmission Facilities Under ISO Operational Control. Each Transmission Owner shall be responsible for providing notification of maintenance schedules to the ISO for Facilities Requiring ISO Notification.

2.09    Investigations and Restoration.  Each Transmission Owner shall promptly conduct investigations of equipment malfunctions and failures and forced transmission outages in a manner consistent with applicable FERC, PSC, NRC, NERC, NPCC and NYSRC rules, principles, guidelines, standards and requirements, ISO Procedures and Good Utility Practice. Each Transmission Owner shall supply the results of such investigations to the NYSRC, the ISO and the other Transmission Owners. Each Transmission Owner shall determine the level of resources to be applied to restore facilities to service following a failure, malfunction, or forced transmission outage. Following a total or partial system interruption, restoration shall be coordinated between the ISO and the Transmission Owners' control centers. The Transmission Owners' control centers shall have the authority, in coordination with the ISO, to restore the system and to re-establish service if doing so would minimize the period of service interruption.

2.10    Information and Support.  The Transmission Owners shall obtain from the ISO and the ISO shall provide to the Transmission Owners the necessary information and support services to comply with their obligations under this Article.

ARTICLE 3.0:  RESPONSIBILITIES OF THE ISO

3.01    Operation and Coordination.  The ISO shall direct the operation of, and coordinate the maintenance scheduling of, certain facilities of the NYS Power System, including coordination with control centers maintained by the Transmission Owners in accordance with the Reliability Rules, as follows:

a.      Assuming responsibility for Control Area operations of the NYS Power System previously performed by NYPP;

b.      Performing balancing of Generation and Load while ensuring the safe, reliable and efficient operation of the NYS Power System;

c.      Exercising Operational Control over certain facilities of the NYS Power System under normal operating conditions and system Emergencies to maintain system reliability; and

d.      Coordinating the NYS Power System equipment outages and maintenance and maintaining the safety and short term reliability of the NYS Power System.

3.02    Tariff Administration and Performance of Responsibilities Under ISO Related Agreements .  Subject to the provisions of Section 6.09, the ISO shall (a) administer the ISO OATT, the ISO Services Tariff and the ISO Agreement in accordance with their provisions as they may be amended from time to time, and (b) shall comply with the provisions of this Agreement, the NYSRC Agreement and the ISO/NYSRC Agreement.

3.03    Amendment of ISO Agreement and ISO Tariffs.  Notwithstanding any other provision in this Agreement except for the provisions of Section 3.10, the ISO OATT, the ISO Services Tariff and the ISO Agreement may be modified only as follows: any proposed amendment to the ISO OATT, the ISO Services Tariff or the ISO Agreement must be submitted to both the ISO Management Committee and the ISO Board; if both the ISO Board and the ISO Management Committee agree to the proposed amendment, the ISO shall file the proposed amendment with the Commission pursuant to Section 205 of the FPA; if the ISO Board and the ISO Management Committee do not agree on the proposed amendment, the proposed amendment may not be filed with the Commission pursuant to Section 205 of the FPA. Notwithstanding the foregoing, the ISO Board may submit to the Commission a proposed amendment to the ISO OATT, the ISO Services Tariff or the ISO Agreement under Section 205 of the FPA, without the concurrence of the Management Committee, under the following circumstances: the ISO Board certifies that (1) the proposed amendment is necessary to address exigent circumstances related to the reliability of the NYS Power System or to address exigent circumstances related to an ISO Administered Market; and (2) the urgency of the situation justifies a deviation from the normal ISO governance procedures. Any proposed amendment submitted unilaterally by the ISO shall contain an expiration date of no later than one hundred and twenty (120) days after it is filed with FERC and shall expire no later than one hundred twenty (120) days after it was filed with FERC, unless the Management Committee files with FERC a written concurrence with the proposed amendment within the one hundred and twenty (120) day period or FERC approves the proposed amendment under the just and reasonable standard under Section 206 of the Federal Power Act. The ISO Board shall have the authority to call a special meeting of the Management Committee to request its concurrence in a proposed amendment.

     Nothing in this Section 3.03 shall be construed in any way as affecting the right of the ISO or any person to make a filing with the Commission pursuant to Section 206 of the Federal Power Act.

3.04    Granting of Authority.  The ISO responsibilities set forth in Article 3 of this Agreement, are granted by each Transmission Owner to the ISO only so long as each of the conditions set forth below is met and continues to be met throughout the term of this Agreement:

a.      The ISO fully implements all Reliability Rules including, without limitation, using all reasonable efforts to require all Market Participants to maintain applicable levels of Installed Capacity and Operating Capacity, consistent with the ISO OATT, the ISO Services Tariff and all Reliability Rules;

b.      The ISO has a FERC-accepted transmission tariff(s) which provide(s) for full recovery of the following, to the extent allowed, accepted or approved by FERC: the Annual Transmission Revenue Requirement of each of the Investor Owned Transmission Owners, NTAC, the annual transmission revenue requirement of LIPA, and any Stranded Investment Recovery Charge;

c.      The ISO does not materially and adversely affect the right of any Transmission Owner concerning transitional arrangements set forth in the ISO Tariffs, pertaining or relating to Existing Transmission Agreements which are in effect at the commencement of ISO operations;

d.      Con Edison, LIPA and NYPA have adequate assurance in the opinion of each such entity, that participation in the ISO will not jeopardize the tax-exempt status of their respective tax-exempt bonds, the ability of such Investor-Owned Transmission Owner to deduct interest payments, or the ability of the Transmission Owners to secure future tax-exempt financing;

e.      The ISO does not act in violation of lawful PSC or FERC Orders;

f.      The ISO does not file a request under Section 205 of FPA to revise the provisions in the ISO Services Tariff related to indemnification and limitation of liability;

g.      The ISO does not have a financial interest in any commercial transaction involving the use of the NYS Power System or any other electrical system;

h.      The ISO does not seek modification of any provision of the ISO OATT or the ISO Services Tariff so as to require, directly or indirectly, wheeling to end users except as authorized by the PSC or a retail access tariff approved by the Long Island Power Authority's Board of Trustees, or a sham wholesale transaction (as defined in FPA Section 212(h));

i.      The ISO distributes revenues from the collection of transmission charges to the Transmission Owner in a timely manner; and

j.      The ISO enforces and complies with the creditworthiness and collection standards of the ISO Procedures, the ISO OATT and the ISO Services Tariff.

3.05    Collection and Billing.  The ISO shall facilitate and/or perform the billing and collection of revenues related to services provided by the ISO pursuant to the terms of the ISO OATT and the ISO Services Tariff.

3.06    NYPA Annual Transmission Revenue Requirement.  This Agreement is premised on NYPA recovering its full annual transmission revenue requirement. This is to be achieved through a mechanism known as the NTAC. NYPA will submit its annual revenue requirement for FERC approval. NYPA will be entitled to receive from the ISO the difference between its FERC-approved revenue requirement and the sum of revenues it collects from contracts and from TSCs associated with its current transmission system. The ISO will credit any TCC revenues associated with NYPA's facilities and allocate the remainder on a kWh basis to all transmission Load the ISO serves. NYPA's recovery pursuant to NTAC is limited as described in Attachment H to the ISO OATT. This Agreement is further premised on each Investor-Owned Transmission Owner being authorized to fully recover the NTAC charged to its transmission and retail customers and that any necessary regulatory approvals for such full recovery will be granted by the PSC and FERC.

3.07    Proposed Material Modifications to the NYS Power System.  The ISO shall establish procedures to evaluate the impact of any proposed material modifications to the NYS Power System. If the ISO or a Transmission Owner determines that a proposed modification will have a negative impact on system reliability or on total Interface transfer capability over an Interface or Interfaces, the ISO or the Transmission Owner may refer the issue for resolution pursuant to procedures comparable to those set forth in Article 5 of the ISO/NYSRC Agreement. However, the approval of the NYSRC or the ISO shall not be required to submit the issue to the PSC for resolution.

3.08    OASIS.  The ISO shall maintain the OASIS for the New York Control Area.

3.09    Transmission Owner Reimbursement and Assumption of Existing Obligations.  As soon as practicable, or no later than a date to be mutually agreed upon by the Parties, the ISO shall reimburse the Transmission Owners for all costs associated with the start-up and establishment of the ISO, to the extent that the ISO is authorized by FERC to recover such costs. Such costs shall include, but are not limited to, the costs associated with: the transfer of the current NYPP Control Center buildings and facilities to the ISO; and start-up and development costs, including but not limited to software development and licensing costs, project development costs, and regulatory costs.

              The ISO shall assume all existing contractual and other obligations of the NYPP. If the ISO decides to take action to terminate any such contract or obligation, or its assumption of existing obligations, it will bear any costs related thereto. The ISO shall utilize the current facilities and equipment of the NYPP and retain NYPP employees to the greatest extent practicable.

3.10    Transmission Owners Reserved Rights.  Notwithstanding any other provision of this Agreement, or any other agreement or amendment made in connection with the restructuring of the NYPP and establishment of the New York ISO, each Transmission Owner shall retain all of the rights set forth in this Section; provided, however, that such rights shall be exercised in a manner consistent with the Transmission Owners' rights and obligations under the Federal Power Act and the Commission's rules and regulations thereunder. This Section is not intended to reduce or limit any other rights of a Transmission Owner as a signatory to this Agreement or any of the ISO Related Agreements or under an ISO Tariff.

a.       Each Transmission Owner shall have the right at any time unilaterally to file pursuant to Section 205 of the Federal Power Act to change the ISO OATT, a Service Agreement under the ISO OATT, or the ISO Agreement to the extent necessary: (i) to recover all of its reasonably incurred costs, plus a reasonable return on investment related to services under the ISO OATT and (ii) to accommodate implementation of, and changes to, a Transmission Owner's retail access program.

b.       Nothing in this Agreement shall restrict any rights, to the extent such rights exist: (i) of each Transmission Owner that is a party to a merger, acquisition or other restructuring transaction to make filings under Section 205 of the Federal Power Act with respect to the reallocation or redistribution of revenues among such Transmission Owners or the assignment of its rights or obligations, to the extent the FPA requires such filings ; or (ii) of any Transmission Owner to terminate its participation in the New York ISO pursuant to Section 3.02 of the ISO Agreement or Article 6 of this Agreement, notwithstanding any effect its withdrawal from the New York ISO may have on the distribution of transmission revenues among other Transmission Owners.

c.      Each Transmission Owner retains all rights that it otherwise has incident to its ownership of its assets, including, without limitation, its transmission facilities including, without limitation, the right to build, acquire, sell, merge, dispose of, retire, use as security, or otherwise transfer or convey all or any part of its assets, including, without limitation, the right, individually or collectively, to amend or terminate the Transmission Owner's relationship with the ISO in connection with the creation of an alternative arrangement for the ownership and/or operation of its transmission facilities on an unbundled basis (e.g., a transmission company), subject to necessary regulatory approvals and to any approvals required under applicable provisions of this Agreement.

d.       The obligation of any Transmission Owner to expand or modify its transmission facilities in accordance with the ISO OATT shall be subject to the Transmission Owner's right to recover, pursuant to appropriate financial arrangements contained in Commission-accepted tariffs or agreements, all reasonably incurred costs, plus a reasonable return on investment, associated with constructing and owning or financing such expansions or modifications to its facilities.

e.       The responsibilities granted to the ISO under this Agreement shall not expand or diminish the responsibilities of a Transmission Owner to modify or expand its transmission system, nor confer upon the ISO the authority to direct a Transmission Owner to modify or expand its transmission system.

f.       Each Transmission Owner shall have the right to adopt and implement procedures it deems necessary to protect its electric facilities from physical damage or to prevent injury or damage to persons or property.

g.       Each Transmission Owner retains the right to take whatever actions it deems necessary to fulfill its obligations under local, state or federal law.

h.       Nothing in this Agreement shall be construed as limiting in any way the rights of a Transmission Owner to make any filing with the PSC.

i.       Notwithstanding anything to the contrary in this Agreement, no amendment to any provision of this Section may be adopted without the agreement of the Transmission Owners.

3.11    Retention of Non-Transferred Obligations.  Any and all other rights and responsibilities of a Transmission Owner related to the ownership or operation of its transmission assets or to its rights to withdraw its assets from ISO control, that have not been specifically transferred to the ISO under this Agreement or otherwise addressed under this Agreement, will remain with the Transmission Owners.

3.12    LIPA Scheduling Procedures.  LIPA shall develop and file with the ISO procedures that will be implemented by LIPA on a nondiscriminatory basis. The procedures shall cover: (a) LIPA's scheduling of transactions on the Northport-Norwalk intertie; (b) submitting such schedules to the ISO by the ISO's deadline for submitting schedules; (c) developing a preapproved list of transactions that the ISO may schedule and list of Transmission Customers that may withdraw Energy from and inject Energy into the Long Island Transmission District; and (d) any additional procedures required for LIPA to coordinate transaction scheduling with the ISO. LIPA will be the only party authorized to submit schedules to the ISO for Transmission Service on the Northport-Norwalk intertie. All parties seeking Transmission Service into and out of the Long Island Transmission District shall obtain pre-approval from LIPA before scheduling transactions with and through the ISO. LIPA shall electronically certify to the ISO pre-approved customers and transactions. If a party or transaction is not so pre-approved and certified by LIPA and such party submits a schedule for such a transaction to the ISO, the ISO shall reject the schedule and advise such party that it must obtain LIPA approval.

ARTICLE 4.0:  ASSIGNMENT

4.01    Limitations of Assignment by the ISO.  This Agreement cannot be assigned by the ISO.

4.02    Transmission Owner Assignments.  This Agreement may be assigned by any Transmission Owner including, without limitation, to:

a.        any entity(ies) formed pursuant to a plan of restructuring approved by the PSC in conjunction or compliance with or in furtherance of PSC Case No. 94-E-0952 Opinion 96-12 and/or other related orders; or

b.        any entity(ies) in connection with a merger, consolidation, reorganization or other change in the organizational structure of the assigning Transmission Owner, provided that the surviving entity(ies) agree, in writing, to be bound by the terms of this Agreement.

ARTICLE 5.0:  LIMITATION OF LIABILITY AND INDEMNIFICATION

5.01    Limitations of Liability.  Except as otherwise provided under the ISO OATT, the Transmission Owners shall not be liable (whether based on contract, indemnification, warranty, tort, strict liability or otherwise) to the ISO or any Market Participant or any third party or other party for any damages whatsoever, including without limitation, special, indirect, incidental, consequential, punitive, exemplary or direct damages resulting from any act or omission in any way associated with this Agreement, except to the extent the Transmission Owner is found liable for gross negligence or intentional misconduct, in which case the Transmission Owner shall not be liable for any special, indirect, incidental, consequential, punitive or exemplary damages. Nothing in this Section will excuse a Transmission Owner from an obligation to pay for services provided to the Transmission Owner by the ISO or to pay any deficiency payments, penalties or sanctions imposed by the ISO under the ISO OATT or the ISO Services Tariff.

5.02    Additional Limitations of Liability.  Except as otherwise provided under the ISO OATT, a Transmission Owner shall not be liable for any indirect, consequential, exemplary, special, incidental or punitive damages including, without limitation, lost revenues or profits, the cost of replacement power or the cost of capital, even if such damages are foreseeable or the damaged party has been advised of the possibility of such damages and regardless of whether any such damages are deemed to result from the failure or inadequacy of any exclusive or other remedy.

5.03    Indemnification.  The ISO shall indemnify, save harmless and defend the Transmission Owners, including their directors, officers, employees, trustees, and agents, or each of them, from and against all claims, demands, losses, liabilities, judgments, damages (including, without limitation, any consequential, incidental, direct, special, indirect, exemplary or punitive damages and economic costs), and related costs and expenses (including, without limitation, reasonable attorney and expert fees, and disbursements incurred by the Transmission Owners in any actions or proceedings between one or more Transmission Owners and one or more Transmission Owners and a third party, Market Participant, the ISO, or any other party) arising out of or related to the Transmission Owner's or the ISO's acts or omissions related in any way to the Transmission Owner's ownership or operation of its transmission facilities when such acts or omissions are either (1) pursuant to or consistent with ISO Procedures or direction; or (2) in any way related to the Transmission Owner's or the ISO's performance under the ISO OATT, except to the extent that the Transmission Owner(s) is found liable for negligence or intentional misconduct, and under the ISO Services Tariff, the ISO Agreement, the ISO/NYSRC Agreement, NYSRC Agreement, or this Agreement, except to the extent the Transmission Owner(s) is found liable for gross negligence or intentional misconduct.

5.04    Force Majeure.  A Party shall not be considered to be in default or breach under this Agreement, and shall be excused from performance or liability for damages to any other party, if and to the extent it shall be delayed in or prevented from performing or carrying out any of the provisions of this Agreement, except the obligation to pay any amount when due, arising out of or from any act, omission, or circumstance occasioned by or in consequence of any act of God, labor disturbance, failure of contractors or suppliers of materials, act of the public enemy, war, invasion, insurrection, riot, fire, storm, flood, ice, explosion, breakage or accident to machinery or equipment or by any other cause or causes beyond such Party's reasonable control, including any curtailment, order, regulation, or restriction imposed by governmental, military or lawfully established civilian authorities, or by the making of repairs necessitated by an emergency circumstance not limited to those listed above upon the property or equipment of the ISO or any party to the ISO Agreement. Nothing contained in this Article shall relieve any entity of the obligations to make payments when due hereunder or pursuant to a Service Agreement. Any party claiming a force majeure event shall use reasonable diligence to remove the condition that prevents performance, except the settlement of any labor disturbance shall be in the sole judgment of the affected party.

5.05    Claims by Employees and Insurance.  A Party shall be solely responsible for and shall bear all of the costs of claims by its own employees, contractors, or agents arising under and covered by, any workers' compensation law. A Party shall furnish, at its sole expense, such insurance coverage and such evidence thereof, or evidence of self-insurance, as is reasonably necessary to meet its obligations under this Agreement. Additionally, the ISO will procure insurance or other alternative risk financing arrangements sufficient to cover the risks associated with the ISO carrying out its obligations, including the obligation to indemnify the Transmission Owners. The ISO shall provide the Transmission Owners with the details of such insurance and shall have them named as additional insureds to the extent of their insurable interests.

5.06    Survival.  The provisions of this Article, "Limitations of Liability and Indemnification" shall survive the termination or expiration of this Agreement or the ISO Tariffs.

ARTICLE 6.0:  OTHER PROVISIONS

6.01    Term and Termination.  This Agreement shall become effective upon the execution of this Agreement by the Transmission Owners and the ISO and on the latest of: (i) the date(s) FERC accepts for filing, without condition or material modification: (a) this Agreement; (b) the ISO Tariffs; (c) the ISO Agreement; (d) the NYSRC Agreement; and (e) the ISO/NYSRC Agreement ("ISO Tariffs" and "ISO Related Agreements"); (ii) the date on which FERC, the PSC and any other regulatory agency having jurisdiction grant all necessary approvals, including, without limitation, any approvals required under Section 70 of the Public Service Law and Section 203 of the FPA; (iii) September 1, 1999; or (iv) on such later date specified by FERC. Without waiving or limiting any of its other rights under this Article, if a Transmission Owner determines that any of the conditions set forth in Section 3.04 hereof is not being met or ceases to be in full force and effect that Transmission Owner may withdraw from this Agreement, the ISO Agreement and the ISO Tariffs and withdraw its assets from the ISO's control and administration on ninety (90) days prior written notice to all Parties to this Agreement and FERC. Such notice shall identify the condition or conditions set forth in Section 3.04 that have not been met or no longer are in full force and effect; provided, however, that prior to the filing of such notice, the ISO shall be advised of the specific condition or conditions that are no longer in full force and effect, and the ISO shall have the opportunity to restore the effectiveness of the condition or conditions identified within a thirty (30) day period. If the effectiveness of the condition or conditions is not restored within thirty (30) days, the Transmission Owner may file a notice of withdrawal with the ISO and FERC; provided, however, that if the ISO demonstrates that it has made a good faith effort but has been unable to restore the effectiveness of the condition or conditions within the thirty (30) day period, the ISO shall be provided an additional thirty (30) day period to restore the effectiveness of the condition or conditions and the Transmission Owner may not file the notice of withdrawal until the expiration of the second thirty (30) day period. Withdrawal of a Transmission Owner under this Section shall be effective ninety (90) days after the filing of the notice of withdrawal unless FERC finds that such withdrawal of an Investor-Owned Transmission Owner is contrary to the public interest, as that standard has been judicially construed under the Mobile-Sierra doctrine. However, the Transmission Owner who submitted the notice of withdrawal may withdraw the notice or extend the withdrawal date. Nothing in this section shall be construed as a voluntary undertaking by any Transmission Owner to remain a Party to this Agreement after the expiration of its notice of withdrawal.

     In addition to the foregoing provision, after the fifth anniversary of the effective date of this Agreement, this Agreement may be terminated by a unanimous vote of the Transmission Owners or their successors or assignees. If the Transmission Owners vote to terminate this Agreement, they will file with FERC and the PSC an explanation of their action and a proposal for an alternative plan for the safe, reliable and efficient operation of the NYS Transmission System.

6.02    Withdrawal.  Any Transmission Owner may withdraw from this Agreement, the ISO Agreement and the ISO Tariffs and withdraw its assets from the ISO control and administration upon ninety (90) days written notice to the ISO Board and FERC. In the case of an Investor-Owned Transmission Owner, no further approval by FERC shall be required for such withdrawal from this Agreement, if such Investor-Owned Transmission Owner has on file with FERC its own open access transmission tariff and such withdrawal shall be effective unless FERC finds that such withdrawal is contrary to the public interest, as that standard has been judicially construed under the Mobile-Sierra doctrine . Any modification to this Article shall provide any Party with the right to withdraw from the Agreement pursuant to the unmodified provisions of this Article, within ninety (90) days of the effective date of such modification. Notwithstanding any other provision of Article 6, in the event that the tax-exempt financing of a Party is jeopardized by its participation in the ISO, the Party may withdraw from this Agreement, the ISO Agreement and the ISO Tariffs and withdraw any assets from ISO control and administration upon thirty (30) days prior written notice to the ISO Board.

6.03    Obligations after Termination or Withdrawal.

a.      Following termination or withdrawal from the Agreement, a Party shall remain liable for all obligations arising hereunder prior to the effective date of termination or withdrawal, including all obligations accrued prior to the effective date, imposed on the Party by this Agreement or the ISO Tariffs or other ISO Related Agreements.

b.     Termination or the withdrawal from this Agreement shall not relieve a Party of any continuing obligation it may have under the ISO Tariffs and ISO Related Agreements, unless the Party also withdraws from the ISO Tariffs or ISO Related Agreements.

6.04    Winding Up.  Any provision of this Agreement that expressly or by implication comes into or remains in force following the termination or withdrawal from this Agreement shall survive such termination or withdrawal. The surviving provisions shall include, but shall not be limited to (i) those provisions necessary to permit the orderly conclusion, or continuation pursuant to another agreement, of transactions entered into prior to the termination of or withdrawal from this Agreement, (ii) those provisions necessary to conduct final billing, collection, and accounting with respect to all matters arising hereunder, and (iii) the indemnification and limitation of liability provisions as applicable to periods prior to such termination or withdrawal. The ISO and the terminating or withdrawing Party or Parties shall have an obligation to make a good faith effort to agree upon a mutually satisfactory termination or withdrawal plan. Such plan shall have among its objectives an orderly termination or withdrawal. The plan shall address, to the extent necessary, the allocation of any costs directly related to the termination or withdrawal by the Party or Parties terminating or withdrawing from the Agreement.

6.05    Confidentiality.

A.      Party Access.  No Transmission Owner shall have a right hereunder to receive or review any documents, data or other information of another Transmission Owner or the ISO supplied pursuant to this Agreement, including documents, data or other information provided to the ISO, to the extent such documents, data or information have been designated as confidential pursuant to the procedures specified in the ISO Tariffs or to the extent that they have been designated as confidential by such other Party; provided, however, that a Party may receive and review any composite documents, data and other information that may be developed based on such confidential documents, data or information if the composite does not disclose any individual Party's confidential data or information.

B.     Required Disclosure.  Notwithstanding anything in this Section to the contrary, if a Party is required by applicable law, or in the course of administrative or judicial proceedings, or subpoena, to disclose information that is otherwise required to be maintained in confidence pursuant to this Section, that Party may make disclosure of such information; provided, however, that as soon as the Party learns of the disclosure requirement and prior to making such disclosure, that Party shall notify the affected Party or Parties of the requirement and the terms thereof and the affected Party or Parties may, at their sole discretion and cost, assert any challenge to or defense against the disclosure requirement and the Party shall cooperate with such affected Parties to the maximum extent practicable to minimize the disclosure of the information consistent with applicable law. Each Party shall cooperate with the affected Parties to obtain proprietary or confidential treatment of such information by the person to whom such information is disclosed prior to any such disclosure.

6.06    Governing Law; Jurisdiction.  The interpretation and performance of this Agreement shall be in accordance with and shall be controlled by the laws of the State of New York as though this Agreement is made and performed entirely in New York. With respect to any claim or controversy arising from this Agreement or performance hereunder within the subject matter jurisdiction of the Federal or State courts of the State of New York, the Parties consent to the exclusive jurisdiction and venue of said courts.

6.07    Headings.  The section headings herein are for convenience and reference only and in no way define or limit the scope of this Agreement or in any way affect its provisions. Whenever the terms hereto, hereunder, herein or hereof are used in this Agreement, they shall be construed as referring to this entire Agreement, rather than to any individual section, subsection or sentence.

6.08    Mutual Agreement.  Nothing in this Agreement is intended to limit the Parties' ability to mutually agree upon taking a course of action different than that provided for herein; provided that doing so will not adversely affect any other Parties' rights under this Agreement.

6.09    Contract Supremacy.  In the case of a conflict between the express terms of this Agreement and the terms of the ISO Agreement, the express terms of this Agreement shall prevail. In the case of a conflict between the express terms of this Agreement and the terms of the ISO-NYSRC Agreement, the express terms of this Agreement shall prevail. In the case of a conflict between the express terms of this Agreement and the express terms of an ISO Tariff the terms of this Agreement shall prevail.

6.10    Additional Remedies.  The Parties agree that remedies at law will be inadequate to protect the interests of the Transmission Owners and that irreparable damage would occur in the event that any of the provisions of this Agreement were not performed by the ISO in accordance with their specific terms or were otherwise breached. Accordingly, it is agreed that the Transmission Owners, or any Transmission Owner, individually or in conjunction with one or more other Transmission Owners, shall be entitled to an injunction or injunctions to prevent breaches of this Agreement or an ISO Tariff by the ISO and specific performance to enforce specifically the terms and provisions thereof in any court of the United States or any state having jurisdiction, this being in addition to any other remedy to which the Transmission Owners are entitled at law or in equity.

6.11    No Third Party Rights.  Nothing in this Agreement, express or implied, is intended to confer on any person, other than the Parties hereto, any rights or remedies under or by reason of this Agreement.

6.12    Not Partners.  Nothing contained in this Agreement shall be construed to make the Parties partners or joint venturers or to render any Party liable for the debts or obligations of any other Party.

6.13    Waiver.  Any waiver at any time of the rights of any Party as to any default or failure to require strict adherence to any of the terms herein, on the part of any other Party or Parties to this Agreement or as to any other matters arising hereunder shall not be deemed a waiver as to any default or other matter subsequently occurring.

6.14    Modification.  This Agreement is subject to change under Sections 205 of the FPA, as that section may be amended or superseded, upon the mutual written agreement of the Parties. Absent mutual agreement of the Parties, it is the intent of this Section 6.14 that, to the maximum extent permitted by law, the terms and conditions set forth in Sections 2.01, 3.03, 3.04, 3.09, 3.10, 3.11, 4.01, 4.02, 5.01, 5.02, 5.03, 5.04, 5.05, 5.06, 6.01, 6.02, 6.09 and 6.14 of this Agreement shall not be subject to change, regardless of whether such change is sought (a) by the Commission acting sua sponte on behalf of a Party or third party, (b) by a Party, (c) by a third party, or (d) in any other manner; subject only to an express finding by FERC that such change is required under the public interest standard under the Mobile-Sierra doctrine. Any other provision of this Agreement may be changed pursuant to a filing with FERC under Section 206 of the FPA and a finding by FERC that such change is just and reasonable.

6.15    Good Faith Resolution.  If cost shifting occurs as a result of FERC's decision in Central Hudson Gas & Electric Corporation, Docket Nos. ER97-1523-011, OA97-470-010, and ER97-4234-008, the ISO and the Transmission Owners will work together in good faith to achieve a fair and equitable resolution.

6.16    Counterparts.  This Agreement may be executed in any number of counterparts, no one of which needs to be executed by all of the Parties, and this Agreement shall be binding upon all the Parties with the same force and effect as if all the Parties had signed the same document, and each such signed counterpart shall constitute an original of this Agreement.

 

     IN WITNESS WHEREOF, each of the Parties hereto has caused this Agreement to be executed in its corporate name by its proper officers as of the date first written above.

 

New York Independent System Operator

 

 

By:  /s/ Richard J. Grossi                   

         Richard J. Grossi     

Title:     Chairman

Date:    12/1/99                            

 

 

 

Central Hudson Gas & Electric Corporation

 

 

By:  /s/ Carl E. Meyer                       

         Carl E. Meyer

Title:      President and Chief Operating Officer

Date:    11/22/99                             

 

 

 

Consolidated Edison Company of New York, Inc.

 

 

By:  /s/ Stephen B. Bram                       

         Stephen B. Bram

Title:     Senior Vice President, Central Operations

Date:    11/22/99                                

 

 

 

LIPA

 

 

By:  /s/ Richard M. Kessel                       

         Richard M. Kessel

Title:     Chairman

Date:     11/22/99                                

 

 

 

New York State Electric & Gas Corporation

 

 

By:  /s/ Denis E. Wickham                       

         Denis E. Wickham

Title:     Senior Vice President, Energy Operating Services

Date:     11/22/99                                

 

 

 

Niagara Mohawk Power Corporation

 

 

By:  /s/ Clement E. Nadeau                      

         Clement E. Nadeau

Title:     Vice President, Electric Delivery

Date:     11/22/99                                

 

 

 

 

 

 

 

 

Orange and Rockland Utilities, Inc.

 

 

By:  /s/ Kevin Burke                              

         Kevin Burke

Title:     President and Chief Executive Officer

Date:     11/22/99                                

 

 

 

 

Rochester Gas and Electric Corporation

 

 

By:  /s/ Clifton B. Olson                        

         Clifton B. Olson

Title:     Vice President, Energy Supply

Date:     11/29/99                                

 

 

 

 

New York Power Authority

 

 

By:  /s/ Clarence D. Rappleyea                   

         Clarence D. Rappleyea

Title:     Chairman and Chief Executive Officer

Date:     12/1/99                                  

 

AL50675          

 

 

 

 

 

 

 

 

 

 

 

APPENDIX  A-1

LISTING OF TRANSMISSION FACILITIES

UNDER ISO OPERATIONAL CONTROL

 

Appendix A-1:  Listing of Transmission Facilities under ISO Operational Control

CIRCUIT ID

FROM

KV

TO

KV

         

7040

CHATEAUGUAY

765

MASSENA

765

BK 1

MARCY

765

MARCY

345

BK 2

MARCY

765

MARCY

345

MSU1

MASSENA

765

MARCY

765

BK 1

MASSENA

765

MASSENA A

230

BK 2

MASSENA

765

MASSENA B

230

5018

BRANCHBURG

500

RAMAPO

500

BK 1500

RAMAPO

500

RAMAPO S.

345

393

ALPS

345

BERKSHIRE

345

PA301

BECK A

345

NIAGARA

345

PA302

BECK B

345

NIAGARA

345

67-1

BOWLINE 1

345

W. HAVERSTRAW

345

W93

BUCHANAN N.

345

EASTVIEW 2N

345

W97

BUCHANAN S.

345

MILLWOOD

345

W98

BUCHANAN S.

345

MILLWOOD

345

13

CLAY

345

DEWITT

345

1-16

CLAY

345

EDIC

345

2-15

CLAY

345

EDIC

345

BK 2

COOPERS CRNS

345

COOPERS CRNS

115

BK 3

COOPERS CRNS

345

COOPERS CRNS

115

CRT-34

COOPERS CRNS

345

ROCK TAVERN

345

CRT-42

COOPERS CRNS

345

ROCK TAVERN

345

22

DEWITT

345

LAFAYETTE

345

F38

E. FISHKIL CE

345

WOOD ST

345

F39

E. FISHKIL CE

345

WOOD ST

345

W64

EASTVIEW 1N

345

SPRAINBROOK

345

W78

EASTVIEW 1S

345

SPRAINBROOK

345

W79

EASTVIEW 2N

345

SPRAINBROOK

345

W65

EASTVIEW 2S

345

SPRAINBROOK

345

EF24-40

EDIC

345

FRASER

345

14

EDIC

345

NEW SCOTLAND

345

FE-1

FITZPATRICK

345

EDIC

345

FS-10

FITZPATRICK

345

SCRIBA

345

33

FRASER

345

COOPERS CRNS

345

BK 2

FRASER

345

FRASER

115

GFS-35

FRASER

345

GILBOA

345

GL3

GILBOA

345

LEEDS

345

GNS-1

GILBOA

345

NEW SCOTLAND

345

37

HOMER CITY

345

STOLLE RD

345

30

HOMER CITY

345

WATERCURE

345

303

HURLEY AVE

345

ROSETON

345

26

INDEPENDENCE

345

CLAY

345

25

INDEPENDENCE

345

SCRIBA

345

SR1-39

KINTIGH

345

ROCHESTER

345

68

LADENTOWN

345

BOWLINE 2

345

         

 

 

 

Appendix A-1:  Listing of Transmission Facilities under ISO Operational Control

CIRCUIT ID

FROM

KV

TO

KV

         

Y88

LADENTOWN

345

BUCHANAN S.

345

67-2

LADENTOWN

345

W. HAVERSTRAW

345

4-36

LAFAYETTE

345

OAKDALE

345

301

LEEDS

345

HURLEY AVE

345

91

LEEDS

345

PLEASANT VALLEY

345

92

LEEDS

345

PLEASANT VALLEY

345

398

LONG MT

345

PLEASANT VALLEY

345

UCC2-41

MARCY

345

COOPERS CRNS

345

UE1-7

MARCY

345

EDIC

345

18

MARCY

345

NEW SCOTLAND

345

W99

MILLWOOD

345

EASTVIEW 1N

345

W85

MILLWOOD

345

EASTVIEW 1S

345

W82

MILLWOOD

345

EASTVIEW 2S

345

2

NEW SCOTLAND

345

ALPS

345

93

NEW SCOTLAND

345

LEEDS

345

94

NEW SCOTLAND

345

LEEDS

345

NS1-38

NIAGARA

345

KINTIGH

345

BK 3

NIAGARA

345

NIAGARA

230

BK 4

NIAGARA

345

NIAGARA

230

BK 5

NIAGARA

345

NIAGARA

230

NR2

NIAGARA

345

ROCHESTER

345

8

NINE MILE PT 1

345

CLAY

345

9

NINE MILE PT 1

345

SCRIBA

345

32

OAKDALE

345

FRASER

345

BK 2

OAKDALE

345

OAKDALE

115

BK 3

OAKDALE

345

OAKDALE

115

17

OSWEGO

345

LAFAYETTE

345

11

OSWEGO

345

VOLNEY

345

12

OSWEGO

345

VOLNEY

345

1

PANNELL RD

345

CLAY

345

2

PANNELL RD

345

CLAY

345

F36

PLEASANT VLY

345

E. FISHKIL CE

345

F37

PLEASANT VLY

345

E. FISHKIL CE

345

F30

PLEASANT VLY

345

WOOD ST

345

F31

PLEASANT VLY

345

WOOD ST

345

W90

PLEASANTVL E.

345

DUNWOODIE

345

W89

PLEASANTVL W.

345

DUNWOODIE

345

Q35L

POLETTI

345

E. 13TH ST C

345

Q35M

POLETTI

345

E. 13TH ST D

345

Y94

RAMAPO

345

BUCHANAN N.

345

W72

RAMAPO

345

LADENTOWN

345

PAR3500

RAMAPO S.

345

RAMAPO

345

PAR4500

RAMAPO S.

345

RAMAPO

345

RP1

ROCHESTER

345

PANNELL RD

345

RP2

ROCHESTER

345

PANNELL RD

345

         

 

 

 

Appendix A-1:  Listing of Transmission Facilities under ISO Operational Control

CIRCUIT ID

FROM

KV

TO

KV

         

77

ROCK TAVERN

345

RAMAPO

345

305

ROSETON

345

E. FISHKIL CE

345

311

ROSETON

345

ROCK TAVERN

345

69

S. MAHWAH A

345

RAMAPO

345

70

S. MAHWAH B

345

RAMAPO

345

20

SCRIBA

345

VOLNEY

345

21

SCRIBA

345

VOLNEY

345

W75

SPRAINBROOK

345

DUNWOODIE

345

BK 3

STOLLE RD

345

STOLLE RD

115

BK 4

STOLLE RD

345

STOLLE RD

115

6

VOLNEY

345

CLAY

345

19

VOLNEY

345

MARCY

345

J3410

WALDWICK

345

S. MAHWAH A

345

K3411

WALDWICK

345

S. MAHWAH B

345

31

WATERCURE

345

OAKDALE

345

BK 1

WATERCURE

345

WATERCURE

230

W80

WOOD ST

345

MILLWOOD

345

W81

WOOD ST

345

MILLWOOD

345

Y87

WOOD ST

345

PLEASANTVL E.

345

Y86

WOOD ST

345

PLEASANTVL W.

345

BK 1

WOOD ST

345

WOOD ST

115

BK 2

WOOD ST

345

WOOD ST

115

11

ADIRONDACK

230

PORTER

230

12

ADIRONDACK

230

PORTER

230

PA27

BECK

230

NIAGARA

230

BP76

BECK

230

PACKARD

230

68

DUNKIRK

230

S. RIPLEY

230

70

E. TOWANDA

230

HILLSIDE

230

73

GARDENVILLE

230

DUNKIRK

230

74

GARDENVILLE

230

DUNKIRK

230

T8-12

GARDENVILLE

230

GARDENVILLE

230

BK 6

GARDENVILLE

230

GARDENVILLE

115

BK 7

GARDENVILLE

230

GARDENVILLE

115

66

GARDENVILLE

230

STOLLE RD

230

BK 3

HILLSIDE

230

HILLSIDE

115

BK 4

HILLSIDE

230

HILLSIDE

115

69

HILLSIDE

230

WATERCURE

230

79

HUNTLEY

230

GARDENVILLE

230

80

HUNTLEY

230

GARDENVILLE

230

68

MEYER

230

HILLSIDE

230

BK 4

MEYER

230

MEYER

115

MA1

MOSES

230

ADIRONDACK

230

MA2

MOSES

230

ADIRONDACK

230

MMS1

MOSES

230

MASSENA A

230

MMS2

MOSES

230

MASSENA B

230

         

 

 

 

Appendix A-1:  Listing of Transmission Facilities under ISO Operational Control

CIRCUIT ID

FROM

KV

TO

KV

         

BK 1

MOSES

230

MOSES

115

BK 2

MOSES

230

MOSES

115

BK 3

MOSES

230

MOSES

115

BK 4

MOSES

230

MOSES

115

MW1

MOSES

230

WILLIS

230

MW2

MOSES

230

WILLIS

230

N BUS TIE

NIAGARA

230

NIAGARA

230

S BUS TIE

NIAGARA

230

NIAGARA

230

BK T1

NIAGARA

230

NIAGARA

115

BK T2

NIAGARA

230

NIAGARA

115

61

NIAGARA

230

PACKARD

230

62

NIAGARA

230

PACKARD

230

64

NIAGARA

230

ROBINSON RD

230

BK 1

OAKDALE

230

OAKDALE

115

77

PACKARD

230

HUNTLEY

230

78

PACKARD

230

HUNTLEY

230

BK 4

PLATTSBURGH A

230

PLATTSBURGH

115

BK 1

PLATTSBURGH B

230

PLATTSBURGH

115

30

PORTER

230

ROTTERDAM

230

31

PORTER

230

ROTTERDAM

230

BK 1

ROBINSON RD

230

ROBINSON RD

115

65

ROBINSON RD

230

STOLLE RD

230

E205W

ROTTERDAM

230

BEAR SWAMP

230

69

S. RIPLEY

230

ERIE E.

230

PSL 33P

ST. LAW OH A

230

ST. LAW OH B

230

PSL 34P

ST. LAW OH C

230

ST. LAW OH D

230

67

STOLLE RD

230

MEYER

230

71

WATERCURE

230

OAKDALE

230

WP2

WILLIS

230

PLATTSBURGH A

230

WP1

WILLIS

230

PLATTSBURGH B

230

BK 1

WILLIS

230

WILLIS

115

BK 2

WILLIS

230

WILLIS

115

998

CODDINGTN RD

115

ETNA

115

907

HARRISON RAD

115

ROBINSON RD

115

964

HICKLING

115

RIDGE RD

115

963

HILLSIDE

115

RIDGE RD

115

943

JENNISON

115

KATTELVILLE

115

966

MEYER

115

BENNETT

115

968

MEYER

115

GREENIDGE

115

974

MILLIKEN

115

ETNA

115

975

MILLIKEN

115

ETNA

115

982

MONTOUR FLS

115

CODDINGTON RD

115

701

NORTH END

115

PLATTSBURGH

115

939

OAKDALE

115

GOUDEY

115

943

OAKDALE

115

KATTELVILLE

115

         

 

 

 

Appendix A-1:  Listing of Transmission Facilities under ISO Operational Control

CIRCUIT ID

FROM

KV

TO

KV

         

PAR3

PLATTSBURGH

115

PLATTSBURGH

115

PV20

PLATTSBURGH

115

S. HERO, VT

115

934

S. PERRY

115

MEYER

115

906- 7X

STA 162

115

S. PERRY

115

976

STATE ST

115

WRIGHT AVE

115

BK 1

W. WOODBOURNE

115

W. WOODBOURNE

69

973

WRIGHT AVE

115

MILLIKEN

115

REA #1

MARCY

765

   

REA #1

MASSENA

765

   

REA #2

MASSENA

765

   

CAP A

COOPERS CRNS

345

   

CAP B

COOPERS CRNS

345

   

CAP #1

E. FISHKIL CE

345

   

CAP #2

E. FISHKIL CE

345

   

CAP #1

FRASER

345

   

CAP #2

FRASER

345

   

SVC

FRASER

345

   

CAP #1

GILBOA

345

   

CAP #1

MARCY

345

   

CAP #2

MARCY

345

   

CAP #1

ROCHESTER

345

   

CAP #1

ROCK TAVERN

345

   

CAP #2

ROCK TAVERN

345

   

 

 

 

 

 

 

 

 

 

 

 

APPENDIX  A-2

LISTING OF TRANSMISSION FACILITIES

REQUIRING ISO NOTIFICATION

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

BK TA5

BUCHANAN N.

345

BUCHANAN TA5

138

BK 1

CLAY

345

CLAY

115

BK 2

CLAY

345

CLAY

115

BK 2

DEWITT

345

DEWITT

115

BK N1

DUNWOODIE

345

DUNWOODIE N1

138

BK S1

DUNWOODIE

345

DUNWOODIE S1

138

71

DUNWOODIE

345

RAINEY

345

72

DUNWOODIE

345

RAINEY

345

Y50

DUNWOODIE

345

SHORE RD

345

BK 14

E. 13TH ST A

345

E. 13TH ST

138

BK 15

E. 13TH ST A

345

E. 13TH ST

138

45

E. 13TH ST A

345

FARRAGUT

345

BK 12

E. 13TH ST B

345

E. 13TH ST

138

BK 13

E. 13TH ST B

345

E. 13TH ST

138

46

E. 13TH ST B

345

FARRAGUT

345

BK 16

E. 13TH ST C

345

E. 13TH ST

138

B47

E. 13TH ST C

345

FARRAGUT

345

BK 10

E. 13TH ST D

345

E. 13TH ST

138

BK 11

E. 13TH ST D

345

E. 13TH ST

138

48

E. 13TH ST D

345

FARRAGUT

345

BK 1

E. FISHKIL CE

345

E. FISHKIL CH

115

BK 1

E.G.C. BNK1

345

E. GARDEN CTY

138

BK 2

E.G.C. BNK2

345

E. GARDEN CTY

138

PAR1

E. GARDEN CTY

345

E.G.C. BNK1

345

PAR2

E. GARDEN CTY

345

E.G.C. BNK2

345

BK 1N

EASTVIEW 1N

345

EASTVIEW

138

BK 1S

EASTVIEW 1S

345

EASTVIEW

138

BK 2N

EASTVIEW 2N

345

EASTVIEW

138

BK 2S

EASTVIEW 2S

345

EASTVIEW

138

BK 2

EDIC

345

EDIC

230

BK 3

EDIC

345

EDIC

115

BK 4

EDIC

345

EDIC

115

BK 1

ELBRIDGE

345

ELBRIDGE

115

41

FARRAGUT

345

GOWANUS N41

345

42

FARRAGUT

345

GOWANUS S42

345

BK 11

FARRAGUT 2

345

FARRAGUT

345

TA 1

FRESHKILLS

345

FRESHKILLS R

138

TB 1

FRESHKILLS

345

FRESHKILLS R

138

22

GOETHALS N.1

345

FRESHKILLS

345

BK 1N

GOETHALS N.1

345

GOETHALS N.2

345

BK 1

GOETHALS N.2

345

GOETHALS

230

21

GOETHALS S.

345

FRESHKILLS

345

G23L&M

GOETHALS S.

345

LINDEN CE

345

R41 S. REACT

GOWANUS

345

   

R42 S. REACT

GOWANUS

345

   
         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

25

GOWANUS N.

345

GOETHALS N.1

345

BK T2

GOWANUS N.

345

GOWANUS B

138

26

GOWANUS S.

345

GOETHALS S.

345

BK T14

GOWANUS S.

345

GOWANUS D

138

B3402

HUDSON A

345

FARRAGUT 1

345

C3403

HUDSON B

345

FARRAGUT 2

345

BK 1

HURLEY AVE

345

HURLEY AVE

115

TA 1

MILLWOOD

345

MILLWOOD

138

TA 2

MILLWOOD

345

MILLWOOD

138

R81/R82

NEW SCOTLAND

345

NEW SCOTLAND

345

BK 1

NEW SCOTLAND

345

NEW SCOTLAND

115

BK 2

NEW SCOTLAND

345

NEW SCOTLAND

115

BK 7

OSWEGO

345

OSWEGO

115

BK 1

PANNELL RD

345

PANNELL RD

115

BK 2

PANNELL RD

345

PANNELL RD

115

BK S1

PLEASANT VLY

345

PLEASANT VLY

115

BK 2

PLEASANTVL E.

345

PLEASANTVL

13

BK 1

PLEASANTVL W.

345

PLEASANTVL

13

61

RAINEY

345

FARRAGUT

345

62

RAINEY

345

FARRAGUT

345

63

RAINEY

345

FARRAGUT

345

BK 8W

RAINEY

345

RAINEY 1

138

BK 8E

RAINEY

345

RAINEY 2

138

BK 1300

RAMAPO

345

RAMAPO

138

BK 2300

RAMAPO

345

RAMAPO

138

1

REYNOLDS RD

345

ALPS

345

BK 2

REYNOLDS RD

345

REYNOLDS RD

115

BK 1

ROCHESTER

345

STA 80

115

BK 2

ROCHESTER

345

STA 80

115

BK 3

ROCHESTER

345

STA 80

115

BK TR1

ROCK TAVERN

345

ROCK TAVERN

115

BK 258

S. MAHWAH A

345

S. MAHWAH

138

BK 1

SHORE RD

345

SHORE RD

138

BK 2

SHORE RD

345

SHORE RD

138

BK S6

SPRAINBROOK

345

DUNWOODIE N2

138

BK N7

SPRAINBROOK

345

DUNWOODIE S3

138

Y49

SPRAINBROOK

345

E. GARDEN CTY

345

X28

SPRAINBROOK

345

TREMONT

345

M51

SPRAINBROOK

345

W. 49TH ST

345

M52

SPRAINBROOK

345

W. 49TH ST

345

M54

W. 49TH ST

345

E. 13TH ST A

345

M55

W. 49TH ST

345

E. 13TH ST B

345

BK 194

W. HAVERSTRAW

345

W. HAVERSTRAW

138

BK 31

DUNKIRK

230

DUNKIRK

115

BK 41

DUNKIRK

230

DUNKIRK

115

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

BK 2

GARDENVILLE

230

GARDENVILLE

115

BK 3

GARDENVILLE

230

GARDENVILLE

115

BK 4

GARDENVILLE

230

GARDENVILLE

115

BK 130

HUNTLEY

230

HUNTLEY

23

BK 140

HUNTLEY

230

HUNTLEY

23

A2253

LINDEN

230

GOETHALS

230

BK 2

PACKARD

230

PACKARD

115

BK 3

PACKARD

230

PACKARD

115

BK 4

PACKARD

230

PACKARD

115

BK 1

PORTER

230

PORTER

115

BK 2

PORTER

230

PORTER

115

BK 6

ROTTERDAM

230

ROTTERDAM

115

BK 7

ROTTERDAM

230

ROTTERDAM

115

BK 8

ROTTERDAM

230

ROTTERDAM

115

34124L

ASTORIA E

138

ASTORIA 4

138

34125L

ASTORIA E

138

ASTORIA 5

138

34181

ASTORIA E

138

CORONA

138

34182

ASTORIA E

138

CORONA

138

34183

ASTORIA E

138

CORONA

138

34184

ASTORIA E

138

CORONA

138

34185

ASTORIA E

138

CORONA

138

34186

ASTORIA E

138

CORONA

138

24121

ASTORIA W

138

ASTORIA 3

138

24122

ASTORIA W

138

ASTORIA 3

138

24124M

ASTORIA W

138

ASTORIA 4

138

24125M

ASTORIA W

138

ASTORIA 5

138

28241

ASTORIA W

138

QUEENS BRDG

138

28242

ASTORIA W

138

QUEENS BRDG

138

28243

ASTORIA W

138

QUEENS BRDG

138

28244

ASTORIA W

138

QUEENS BRDG

138

PAR

BARRETT 1

138

BARRETT 2

138

459

BARRETT 1

138

FREEPORT

138

864

BROOKHAVEN

138

RIVERHEAD

138

95891

BUCHANAN GT

138

BUCHANAN TA5

138

96951

BUCHANAN GT

138

MILLWOOD

138

96952

BUCHANAN GT

138

MILLWOOD

138

18001

CORONA PAR1

138

JAMAICA

138

18002

CORONA PAR2

138

JAMAICA

138

BK N1

DUNWOODIE N1

138

DUNWOODIE N3

138

BK N2

DUNWOODIE N1

138

DUNWOODIE N4

138

99997 TIE

DUNWOODIE N1

138

DUNWOODIE S1

138

99941

DUNWOODIE N2

138

DUNWOODIE N1

138

99031

DUNWOODIE N3

138

SHERMAN CRK

138

99032

DUNWOODIE N4

138

SHERMAN CRK

138

BK S1

DUNWOODIE S1

138

DUNWOODIE S2

138

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

BK S2

DUNWOODIE S1

138

DUNWOODIE S2

138

99153

DUNWOODIE S2

138

E. 179TH ST

138

99942

DUNWOODIE S3

138

DUNWOODIE S1

138

15054

E. 179TH ST

138

HELLGATE 1

138

15053

E. 179TH ST

138

HELLGATE 4

138

15055

E. 179TH ST

138

HELLGATE 6

138

38X01

E. 179TH ST

138

PARKCHESTR1

138

38X02

E. 179TH ST

138

PARKCHESTR2

138

38X04

E. 179TH ST

138

PARKCHESTR3

138

38X03

E. 179TH ST

138

PARKCHESTR4

138

361

E. GARDEN CTY

138

CARLE PLACE

138

462

E. GARDEN CTY

138

NEWBRIDGE RD

138

463

E. GARDEN CTY

138

NEWBRIDGE RD

138

465

E. GARDEN CTY

138

NEWBRIDGE RD

138

362

E. GARDEN CTY

138

ROSLYN

138

32078

FARRAGUT HUD

138

HUDSON AVE D

138

29211-1

FOXHILLS 1

138

WILLOWBROOK

138

29212-1

FOXHILLS 2

138

WILLOWBROOK

138

461

FREEPORT

138

NEWRIDGE RD

138

PSR 1

FRESHKILS AK

138

FRESHKILLS R

138

PSR 2

FRESHKILS AK

138

FRESHKILLS R

138

366-1

GLENWOOD GT

138

GLENWOOD N

138

364

GLENWOOD GT

138

ROSLYN

138

363

GLENWOOD S

138

CARLE PLACE

138

42231

GOWANUS A

138

GREENWOOD

138

42232

GOWANUS C

138

GREENWOOD

138

674

GREENLAWN

138

ELWOOD E

138

29231

GREENWOOD

138

FOXHILLS 1

138

29232

GREENWOOD

138

FOXHILLS 2

138

889

HAUPPAUG

138

CENTRAL ISLIP

138

34052

HELLGATE 1

138

ASTORIA E

138

24054

HELLGATE 2

138

ASTORIA W

138

24053

HELLGATE 3

138

ASTORIA W

138

34051

HELLGATE 4

138

ASTORIA E

138

24051

HELLGATE 5

138

ASTORIA W

138

24052

HELLGATE 6

138

ASTORIA W

138

887

HOLBROOK

138

BROOKHAVEN

138

888

HOLBROOK

138

HOLTSVILLE

138

874

HOLTSVILLE

138

BROOKHAVEN

138

818

HOLTSVILLE

138

UNION AVE

138

32711

HUDSON AVE A

138

HUDSON AVE D

138

32077

HUDSON AVE B

138

HUDSON AVE D

138

701

HUDSON AVE D

138

JAMAICA

138

702

HUDSON AVE D

138

JAMAICA

138

903

JAMAICA

138

LK SUCCESS W

138

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

901 L&M

JAMAICA

138

VALLEY STR 1

138

PAR

LK SUCCESS E

138

LK SUCCESS W

138

563

NEWBRIDGE RD

138

PILGRIM 1

138

561

NEWBRIDGE RD

138

RULAND

138

562

NEWBRIDGE RD

138

RULAND

138

672

NORTHPORT E

138

PILGRIM 1

138

677

NORTHPORT E

138

PILGRIM 1

138

679

NORTHPORT E

138

PILGRIM 2

138

PAR 1

NORTHPORT NE

138

NORTHPORT E

138

681

NORTHPORT W

138

ELWOOD E

138

678

NORTHPORT W

138

ELWOOD W

138

PS2

NORTHPORT W

138

NORTHPORT E

138

1385

NORWALK HARB

138

NORTHPORT NE

138

673

OAKWOOD

138

ELWOOD W

138

675

OAKWOOD

138

SYOSSET

138

871

PILGRIM 1

138

HAUPPAUG

138

881

PILGRIM 2

138

HOLTSVILLE

138

PAR

PILGRIM 2

138

PILGRIM 1

138

883

PILGRIM 2

138

RONKONKOMA

138

862

PORT JEFF

138

HOLBROOK

138

886

PORT JEFF

138

HOLBROOK

138

31281

QUEENS BRDG

138

VERNON

138

31282

QUEENS BRDG

138

VERNON

138

36312

RAINEY 1

138

VERNON

138

36311

RAINEY 2

138

VERNON

138

26 / BK 7108

RAMAPO

138

SUGARLOAF

69

875

RONKONKOMA

138

HOLBROOK

138

882

RULAND

138

HOLBROOK

138

661

RULAND

138

PILGRIM 1

138

662

RULAND

138

PILGRIM 2

138

15031

SHERMAN CRK

138

E. 179TH ST

138

15032

SHERMAN CRK

138

E. 179TH ST

138

366-2

SHORE RD

138

GLENWOOD N

138

365

SHORE RD

138

GLENWOOD S

138

367

SHORE RD

138

LK SUCCESS E

138

368

SHORE RD

138

LK SUCCESS E

138

861

SHOREHAM

138

BROOKHAVEN

138

885

SHOREHAM

138

HOLBROOK

138

863

SHOREHAM

138

WILDWOOD

138

676

SYOSSET

138

GREENLAWN

138

558

SYOSSET

138

LOCUST GROVE

138

559

SYOSSET

138

LOCUST GROVE

138

38X01

TREMONT 11E

138

PARKCHESTR1

138

38X02

TREMONT 11E

138

PARKCHESTR2

138

BK 11

TREMONT 11E

138

TREMONT 11W

138

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

38X04

TREMONT 12E

138

PARKCHESTR3

138

38X03

TREMONT 12E

138

PARKCHESTR4

138

BK 12

TREMONT 12E

138

TREMONT 12W

138

291

VALLEY STR 1

138

BARRETT 1

138

PAR

VALLEY STR 1

138

VALLEY STR 2

138

292

VALLEY STR 2

138

BARRETT 2

138

262

VALLEY STR 2

138

E. GARDEN CTY

138

31231

VERNON

138

GREENWOOD

138

31232

VERNON

138

GREENWOOD

138

884

WADING RIV

138

HOLBROOK

138

891

WADING RIV

138

SHOREHAM

138

890

WILDWOOD

138

RIVERHEAD

138

29211-2

WILLOWBROOK

138

FRESHKILS AK

138

29212-2

WILLOWBROOK

138

FRESHKILS AK

138

1

ALBANY

115

GREENBUSH

115

2

ALBANY

115

GREENBUSH

115

12

ALCOA

115

DENNISON

115

13

ALCOA

115

N. OGDENSBURG

115

R8105

ALCOA N.

115

ALCOA

115

20

ALTAMONT

115

NEW SCOTLAND

115

157(932)

ANDOVER

115

PALMITER RD

115

700

ASHLEY RD

115

PLATTSBURGH

115

5(972)

AUBURN (STATE ST)

115

ELBRIDGE

115

117

BATAVIA

115

SE. BATAVIA

115

953

BATH

115

BENNETT

115

965

BATH

115

MONTOUR FLS

115

BL104

BECK

115

LOCKPORT

115

932

BENNETT

115

PALMITER

115

18

BETHLEHEM

115

ALBANY

115

6

BLACK RIVER

115

LIGHTHOUSE HILL

115

1

BLACK RIVER

115

TAYLORVILLE

115

2

BLACK RIVER

115

TAYLORVILLE

115

8

BLUE CIRCLE CEMENT

115

PLEASANT VALLEY

115

1

BOONVILLE

115

PORTER

115

2

BOONVILLE

115

PORTER

115

969

BORDER CITY

115

GREENIDGE

115

1

BRAINARDSVILLE

115

KENTS FLS

115

3

BROWNS FALLS

115

TAYLORVILLE

115

4

BROWNS FALLS

115

TAYLORVILLE

115

15

CARR ST

115

DEWITT

115

6

CEDAR

115

WHITEHALL

115

1/11

CEDARS

115

DENNISON

115

2/22

CEDARS

115

DENNISON

115

DW-1

CHADWICK

115

DANSKAMMER

115

DW-2

CHADWICK

115

E. WALDEN

115

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

DW-3

CHADWICK

115

W. BALMVILLE

115

13

CHURCHTOWN

115

PLEASANT VALLEY

115

3

CLAY

115

DEWITT

115

5

CLAY

115

DEWITT

115

14

CLAY

115

GE

115

10

CLAY

115

TEALL AVE

115

11

CLAY

115

TEALL AVE

115

17

CLAY

115

WOODARD

115

15

CLINTON

115

ING-MECOTAP

115

981-1

CODDINGTN RD

115

E. ITHACA

115

3

COFFEEN

115

BLACK RIVER

115

5

COFFEEN

115

LIGHTHOUSE HILL

115

929

COLLIERS

115

RICHFIELD SPRINGS

115

7

COLTON

115

BATTLE HILL

115

1

COLTON

115

BROWNS FALLS

115

2

COLTON

115

BROWNS FALLS

115

3

COLTON

115

MALONE

115

950

COOPERS CRNS

115

FERNDALE

115

957

COOPERS CRNS

115

W. WOODBOURNE

115

1(947)

CORTLAND

115

ETNA

115

991/995

CROTON FLS

115

AMAWALK

115

994/990

CROTON FLS

115

SYLVAN LK

115

991/992

CROTON FLS

115

WOOD ST

115

13

CURTIS ST.

115

TEALL AVE

115

AC

DANSKAMMER

115

N. CHELSEA

115

DC

DANSKAMMER

115

N. CHELSEA

115

DR

DANSKAMMER

115

REYNOLDS HL

115

DB

DANSKAMMER

115

W. BALMVILLE

115

903

DAVIS RD

115

GARDENVILLE

115

927

DAVIS RD

115

STOLLE RD

115

951-1

DELHI

115

DELHI TAP

115

949

DELHI

115

JENNISON

115

919

DELHI

115

OAKDALE

115

951-2

DELHI TAP

115

COLLIERS

115

4

DENNISON

115

COLTON

115

5

DENNISON

115

COLTON

115

19

DEWITT

115

TILDEN

115

160

DUNKIRK

115

FALCONER

115

161

DUNKIRK

115

FALCONER

115

162

DUNKIRK

115

FALCONER

115

J

E. WALDEN

115

ROCK TAVERN

115

981-2

E. ITHACA

115

ETNA

115

LR-2

E. KINGSTON

115

RHINEBECK

115

946

E. NORWICH

115

JENNISON

115

956

E. SAYRE

115

N. WAVERLY

115

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

PX-1

E. WALDEN

115

MODENA

115

D

E. WALDEN

115

ROCK TAVERN

115

18

ELBRIDGE

115

GERES LOCK

115

19

ELBRIDGE

115

GERES LOCK

115

3

ELBRIDGE

115

GERES LOCK

115

4

ELBRIDGE

115

WOODWARD

115

926

ERIE ST

115

STOLLE RD

115

945-2

ETNA

115

WILLET

115

153

FALCONER

115

HOMER HILL

115

154

FALCONER

115

HOMER HILL

115

171

FALCONER

115

WARREN

115

959

FERNDALE

115

W. WOODBOURNE

115

2

FEURA BUSH

115

N. CATSKILL

115

HF

FISHKILL PLN

115

E. FISHKIL CH

115

A/990

FISHKILL PLN

115

SYLVAN LK

115

3

FITZPATRICK

115

LIGHTHOUSE HILL

115

951-T

FRASER

115

DELHI TAP

115

4

FULTON

115

CLAY

115

141

GARDENVILLE

115

DUNKIRK

115

142

GARDENVILLE

115

DUNKIRK

115

54(921)

GARDENVILLE

115

ERIE ST

115

151

GARDENVILLE

115

HOMER HILL

115

152

GARDENVILLE

115

HOMER HILL

115

925

GARDENVILLE

115

STOLLE RD

115

8

GE

115

GERES LOCK

115

15(979)

GENEVA(BORDER CITY)

115

ELBRIDGE

115

16

GERES LOCK

115

TILDEN

115

908

GINNA

115

PANNELL RD

115

912

GINNA

115

PANNELL RD

115

911-1

GINNA

115

STA 204A

115

913

GINNA

115

STATION 42

115

15

GREENBUSH

115

HUDSON

115

13

GREENBUSH

115

SCHODACK

115

967

GREENIDGE

115

MONTOUR FLS

115

970

GREENIDGE

115

MONTOUR FLS

115

908

HARRISON RAD

115

HINMAN

115

960/958

HICKLING

115

HILLSIDE

115

962-1

HILLSIDE

115

N. WAVERLY

115

157

HOMER HILL

115

ANDOVER

115

6

HOOSICK

115

BENNINGTON

115

12

HUDSON

115

PLEASANT VALLEY

115

36

HUNTLEY

115

GARDENVILLE

115

39

HUNTLEY

115

GARDENVILLE

115

36

HUNTLEY

115

LOCKPORT

115

37

HUNTLEY

115

LOCKPORT

115

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

HP

HURLEY AVE

115

LINCOLN PARK

115

OR-1

HURLEY AVE

115

OHIOVILLE

115

2

INDECK

115

LIGHTHOUSE HILL

115

15

INGHAMS

115

MECO

115

7(942)

INGHAMS

115

RICHFIELD SPRINGS

115

9

INGHAMS

115

STONER

115

PAR 2

INGHAMS CD

115

INGHAMS ED

115

R81

INGHAMS CD

115

INGHAMS ED

115

954

JENNISON

115

HANCOCK

115

1-KS

KENTS FLS

115

SARANAC

115

MC

KNAPPS CRN

115

MANCHESTER A

115

952

LAUREL LK

115

GOUDEY

115

7

LIGHTHOUSE HILL

115

CLAY

115

LR-1

LINCOLN PARK

115

E. KINGSTON

115

107

LOCKPORT

115

BATAVIA

115

108

LOCKPORT

115

BATAVIA

115

112

LOCKPORT

115

BATAVIA

115

100

LOCKPORT

115

HINMAN

115

111

LOCKPORT

115

MORTIMER

115

113

LOCKPORT

115

MORTIMER

115

114

LOCKPORT

115

MORTIMER

115

6

MCINTYRE

115

BATTLE HILL

115

10

MECO

115

ROTTERDAM

115

10

MILAN

115

PLEASANT VALLEY

115

MR

MILAN

115

RHINEBECK

115

PX-2

MODENA

115

OHIOVILLE

115

963-2

MONTOUR FLS

115

RIDGE RD

115

978-2

MONTOUR FLS

115

RIDGE RD

115

1

MORTIMER

115

ELBRIDGE

115

2

MORTIMER

115

ELBRIDGE

115

110

MORTIMER

115

GOLAH

115

24

MORTIMER

115

PANNELL RD

115

25

MORTIMER

115

PENNELL RD

115

904

MORTIMER

115

ROCHESTER(STA 80)

115

901

MORTIMER

115

STA 33

115

7X8272

MORTIMER

115

STA 82

115

MAL4

MOSES

115

ALCOA N.

115

MAL6

MOSES

115

ALCOA N.

115

MAL5

MOSES

115

ALCOA S.

115

103

MOUNTAIN

115

LOCKPORT

115

120

MOUNTAIN

115

NIAGARA

115

5

N. TROY

115

HOOSICK

115

T7

N. CATSKILL

115

MILAN

115

NF

N. CHELSEA

115

FISHKILL PLN

115

9

N. OGDENSBURG

115

MCINTYRE

115

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

16

N. TROY

115

REYNOLDS RD

115

14

N. TROY

115

WYNANTSKILL

115

8

NEW SCOTLAND

115

ALBANY

115

4

NEW SCOTLAND

115

BETHLEHEM

115

3

NEW SCOTLAND

115

FEURA BUSH

115

9

NEW SCOTLAND

115

FEURA BUSH

115

7

NEW SCOTLAND

115

LONG LANE

115

180

NIAGARA

115

GARDENVILLE

115

101

NIAGARA

115

LOCKPORT

115

102

NIAGARA

115

LOCKPORT

115

191

NIAGARA

115

PACKARD

115

192

NIAGARA

115

PACKARD

115

193

NIAGARA

115

PACKARD

115

194

NIAGARA

115

PACKARD

115

195

NIAGARA

115

PACKARD

115

4

NINE MILE PT 1

115

FITZPATRICK

115

702

NORTHEND

115

ASHLEY RD

115

OR-2

OHIOVILLE

115

REYNOLDS HL

115

3

ONEIDA

115

CORTLAND

115

7

ONEIDA

115

PORTER

115

6

ONEIDA

115

YAHNUNDASIS

115

3

OSWEGO

115

S. OSWEGO

115

5

OSWEGO

115

S. OSWEGO

115

8

OSWEGO

115

S. OSWEGO

115

181(922)

PACKARD

115

ERIE ST.

115

182

PACKARD

115

GARDENVILLE

115

130

PACKARD

115

HUNTLEY

115

129

PACKARD

115

WALCK RD

115

4(977)

PANNELL RD

115

GENEVA (BORDER CITY)

115

PS1

PLATTSBURGH

115

SARANAC

115

C/A

PLEASANT VLY

115

FISHKILL PLN

115

X-1

PLEASANT VLY

115

INWOOD

115

M

PLEASANT VLY

115

MANCHESTER A

115

4

PORTER

115

VALLEY

115

5

PORTER

115

WATKINS RD

115

930

QUAKER RD

115

MACEDON

115

914

QUAKER RD

115

PANNELL RD

115

13(980)

QUAKER RD

115

SLEIGHT RD

115

6

QUEENSBURY

115

CEDAR

115

X-2

REYNOLDS HL

115

INWOOD

115

9

REYNOLDS RD

115

GREENBUSH

115

978-1

RIDGE RD

115

HILLSIDE

115

SL

ROCK TAVERN

115

SUGARLOAF

115

17

ROTTERDAM

115

ALTAMONT

115

13

ROTTERDAM

115

NEW SCOTLAND

115

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

19

ROTTERDAM

115

NEW SCOTLAND

115

1

ROTTERDAM

115

SPIER

115

2

ROTTERDAM

115

SPIER

115

7

S. OSWEGO

115

FULTON

115

10

S. OSWEGO

115

CURTIS ST.

115

9

S. OSWEGO

115

GERES LOCK

115

6

S. OSWEGO

115

INDECK

115

1

S. OSWEGO

115

NINE MILE PT 1

115

961

S. OWEGO

115

GOUDEY

115

962-2

S. OWEGO

115

N. WAVERLY

115

933

S. PERRY

115

MEYER

115

REA BYPASS

SANDBAR

115

SANDBAR OMS

115

SERIES REA

SANDBAR

115

SANDBAR OMS

115

14

SCHODACK

115

CHURCHTOWN

115

119

SE. BATAVIA

115

GOLAH

115

EF

SHENANDOAH

115

E. FISHKIL CH

115

3(971)

SLEIGHT RD

115

AUBURN (STATE ST)

115

906

STA 162

115

STA 82

115

911-2

STA 204A

115

STA 42

115

922

STA 67

115

STA 80

115

903

STA 67

115

STA 82

115

23

STA 82

115

QUAKER RD

115

902

STA 82

115

STA 33

34

905

STA 82

115

STA 80

115

12

STONER

115

ROTTERDAM

115

BK 6108

SUGARLOAF

115

SUGARLOAF

69

5

TAYLORVILLE

115

BOONVILLE

115

6

TAYLORVILLE

115

BOONVILLE

115

4

TEALL AVE

115

DEWITT

115

2

TEALL AVE

115

ONEIDA

115

5

TEALL AVE

115

ONEIDA

115

18

TILDEN

115

CORTLAND

115

3

VALLEY

115

INGHAMS

115

133

WALCK RD

115

HUNTLEY

115

2

WATKINS RD

115

INGHAMS

115

7

WHITEHALL

115

BLISSVILLE

115

13

WHITEHALL

115

MOHICAN

115

945-1

WILLET

115

E. NORWICH

115

1

WILLIS

115

BRAINARDSVILLE

115

1(910)

WILLIS

115

MALONE

115

996

WOOD ST

115

AMAWALK

115

13

WYNANTSKILL

115

REYNOLDS RD

115

3

YAHNUNDASIS

115

PORTER

115

WH1-1

HONK FLS

69

NEVERSINK B

69

WH2

HONK FLS

69

W. WOODBOURNE

69

         

 

 

 

Appendix A-2:  Listing of Transmission Facilities Requiring ISO Notification

CIRCUIT ID

FROM

KV

TO

KV

         

WH1-2

NEVERSINK A

69

NEVERSINK B

69

WH1-3

NEVERSINK B

69

W. WOODBOURNE

69

690

SMITHFIELD

69

FALLS VILLGE

69

R1

DUNWOODIE

345

   

SR #1 REAC

E. GARDEN CTY

345

   

SR #2 REAC

E. GARDEN CTY

345

   

R25

GOETHALS

345

   

R26

GOETHALS

345

   

REA #1

GOETHALS S.

345

   

R18

GOWANUS

345

   

R6

GOWANUS

345

   

CAP #1

LEEDS

345

   

CAP #2

LEEDS

345

   

SVC

LEEDS

345

   

CAP #1

NEW SCOTLAND

345

   

CAP #2

NEW SCOTLAND

345

   

CAP #3

NEW SCOTLAND

345

   

RSR61

POLETTI

345

   

RSR62

POLETTI

345

   

R1

SHORE RD

345

   

2N1 REACT

SPRAINBROOK

345

   

2N2 REACT

SPRAINBROOK

345

   

4S1 REACT

SPRAINBROOK

345

   

4S2 REACT

SPRAINBROOK

345

   

5S1 REACT

SPRAINBROOK

345

   

5S2 REACT

SPRAINBROOK

345

   

R49 S. REACT

SPRAINBROOK

345

   

S6A REACT

SPRAINBROOK

345

   


© 2022 IncJournal is not affiliated with or endorsed by the U.S. Securities and Exchange Commission