SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K/A
(Amendment No.1)
[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934 [FEE REQUIRED]
For the fiscal year ended December 31, 1995
Commission File No. 1-9158
MAI SYSTEMS CORPORATION
(Exact name of registrant as specified in its charter)
Delaware 22-2554549
(State or other jurisdiction (I.R.S. Employer
of incorporation or organization) Identification No.)
9600 Jeronimo Road
Irvine, California 92718
(Address of principal executive offices) (Zip Code)
Registrant's telephone number, including area code: (714) 580-0700
Securities registered pursuant to Section 12(b) of the Act: None
Securities registered pursuant to Section 12(g) of the Act:
Common Stock, $.01 par value per share
Indicate by a check mark whether the registrant (1) has filed all reports
required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months and (2) has been subject to such filing
requirements for the past 90 days. Yes /X/ No / /
Indicate by check mark if disclosure of delinquent filers pursuant to Item
405 of Regulation S-K is not contained herein, and will not be contained, to the
best of registrant's knowledge, in definitive proxy or information statements
incorporated by reference in Part III of this Form 10-K or any amendment to this
Form 10-K. |X|
The registrant's Certificate of Incorporation authorizes the issuance of
10,000,000 shares of $.01 par value Common Stock. As more fully described in
this report, shares of Common Stock are currently being distributed by the
registrant to its former creditors pursuant to its Chapter 11 Plan of
Reorganization. At March 22, 1996, the number of issued and outstanding shares
of the Company's Common Stock was 6,728,401 shares. The aggregate market value
of all of the shares of Common Stock held by non-affiliates of the registrant as
of March 22, 1996 was approximately $29,489,000. Directors and officers and ten
percent or greater stockholders are considered affiliates for the purposes of
this calculation but should not necessarily be deemed affiliates for any other
purpose.
Indicate by check mark whether the registrant has filed all documents and
reports required to be filed by Section 12, 13 or 15(d) of the Securities
Exchange Act of 1934 subsequent to the distribution of securities under a plan
confirmed by a court. Yes /X/ No / /
DOCUMENTS INCORPORATED BY REFERENCE
Portions of registrant's 1994 Annual Report on Form 10-K are incorporated
herein by reference in Part I; portions of registrant's 1995 Annual Report are
incorporated herein by reference in Part II; and portions of registrant's
definitive Proxy Statement to be delivered to stockholders in connection with
the Annual Meeting of Stockholders to be held May 21, 1996 are incorporated
herein by reference into Part III.
<PAGE>
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities and
Exchange Act of 1934, the registrant has duly caused this report to be signed on
its behalf by the undersigned, thereunto duly authorized.
Dated: December 3, 1996
MAI SYSTEMS CORPORATION
By: /s/ William Brian Kretzmer
William Brian Kretzmer
Vice-President, Cheif Financial
Officer and Treasurer
2
<PAGE>
[**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT]
EXHIBIT 10.1
SERVICES AGREEMENT
between
REMANCO INTERNATIONAL, INC.
and
MAI SYSTEMS CORPORATION
This SERVICES AGREEMENT (the "Agreement") is made and entered into as of
the 1st day of October, 1995 (the "Effective Date") by and between REMANCO
INTERNATIONAL, INC., a Delaware corporation ("Remanco"), having is principal
place of business at 260 Fordham Road, Wilmington, Massachusetts 01887, and MAI
SYSTEMS CORPORATION ("MAI"), a Delaware corporation, having its principal place
of business at 9600 Jeronimo Road, Irvine, California 92718.
In consideration of the mutual premises and covenants contained herein,
Remanco and MAI hereby agree as follows:
1. DEFINITIONS. As used in this Agreement, the following words and terms
shall be defined as indicated below.
"Customers" means a user of Remanco Equipment who has entered into a
Services Agreement for said Equipment with Remanco, which Services Agreements
are listed in Exhibit A attached hereto, and all other users of Remanco
Equipment.
"Employees" means those employees of Remanco in Remanco's field service and
depot repair operations listed in Exhibit B attached hereto.
"Equipment" means hardware and firmware supplied by Remanco to an end user
and listed in Exhibit C attached hereto.
"Parts" means those repairable spare parts, including whole Equipment
units, necessary, used or useful in performing Services and listed in Exhibit D
attached hereto.
"Remanco Products" means Equipment and Software as defined herein.
"Service Assets" means the Parts and T/R Equipment as defined herein.
"Services" means hardware maintenance and/or repair services provided in
accordance with the terms of Remanco's Services Agreement or on a time and
materials basis in accordance with Remanco's policies and procedures.
"Services Agreement" means Remanco's standard System Maintenance and
Software Support Agreement pursuant to which Remanco provides hardware and
software maintenance, repair services and support. The current standard Services
Agreement is attached hereto as Exhibit E.
"Software" means Remanco's software licensed with Remanco Equipment to
comprise Remanco Products and Remanco Diagnostic Programs, which Software is
listed in Exhibit C attached hereto.
"T/R Equipment" means Remanco's test fixtures, technicians' tool boxes,
equipment, diagnostics software and equipment, documentation, procedures,
manuals and the like necessary, used or useful in performing Services and listed
in Exhibit F attached hereto.
2. TRANSFER OF SERVICE AND REPAIR BUSINESS.
2.1 Employees. At 12:01 A.M. on the Effective Date, MAI shall offer
employment to the Employees listed in Exhibit B attached hereto who are
employees of Remanco at the salaries listed in such Exhibit. Remanco shall use
its
[**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT]
good faith, best efforts to secure the agreement of the Employees to become
an employee of MAI. Remanco will, with effect from the close of business on
October 1, 1995, terminate the employment of the Employees and pay to all the
Employees all amounts due and owing to them in respect of salary, commissions,
holiday and vacation pay, business and travel expenses, and other amounts due,
less any amounts owed to Remanco by the Employees. Any Employees hired by MAI
shall be new hires of MAI, shall have no accrued MAI retirement, vacation or
pension benefits and MAI shall not be deemed to be a successor employer of such
new hires for any purpose. However, each of such Employees hired by MAI shall be
covered by MAI's medical, dental, life insurance and other standard employee
benefit programs as of the Effective Date and shall be credited with their years
of service with Remanco solely for purposes of determining their vacation
accrual rates and their eligibility for participation in MAI's benefit programs.
2.2 [**] Service Agreements. On the Effective Date, Remanco shall [**] the
rights and obligations [**] under the Service Agreements listed in Exhibit A
attached hereto, subject to the terms and condits of this Section. [**] Remanco
will thereupon subcontract [**] MAI the obligations to perform Services. Remanco
shall [**] be responsible for all Customer contact, first call support,
invoicing and collection, software support and related matters, other than
performance of Services. Remanco will appoint MAI as its authorized services
representative to perform Services as outlined in Section 3 on a subcontract
basis. Except with respect to the performance of Services on and after the
Effective Date , MAI will not assume any liability of Remanco arising out of the
Service Agreements or otherwise arising prior to the Effective Date. Future
Service Agreements with new Customers will be between such new Customers and
Remanco [**] in keeping with this Section. Renewals of Service Agreements with
Customers will also be between such Customers and Remanco [**] in keeping with
this section.
2.3 Service Assets. Remanco shall furnish MAI with an inventory of Parts
sufficient to maintain the Customers and shall during the Term of this
Agreement, maintain such inventory at appropriate levels. On the Effective Date,
Remanco shall furnish to MAI the T/R Equipment listed in Exhibit F. All Parts
and T/R Equipment remain the property of Remanco. The initial cost to ship and
insure all Parts and T/R Equipment to MAI shall be borne by Remanco. The parties
agree to file the appropriate UCC statements and notices to protect each other's
rights in the Service Assets.
3. PERFORMANCE OF SERVICES.
3.1 Appointment. Remanco hereby appoints MAI, and MAI hereby accepts
appointment, as the exclusive Authorized Service Representative of Remanco to
provide Services to Customers under Service Agreements on a subcontract basis,
except Remanco National Accounts located in Remanco distributor territories
listed in Exhibit L. MAI may not appoint a secondary or sub-authorized service
representative to service Remanco Products without Remanco's prior written
consent, which consent will not be unreasonably withheld. MAI may not provide
support of Remanco Products, in any manner, to unauthorized providers of Remanco
hardware, software, or service.
3.2 Contract Maintenance Services. Commencing on the Effective Date, during
the Term of this Agreement, MAI shall perform Services on Remanco Equipment
under Services Agreements upon the request of Remanco as follows:
(a) Remanco shall maintain a first call telephone desk for its Customers
and shall take directly all calls requesting Services. Remanco shall screen each
call to determine whether the Customer requires software support to be provided
by Remanco, the problem can be resolved during the telephone call or Services
are required. If Services are required, Remanco shall contact MAI. MAI will
perform all Services, including hardware field maintenance, depot repair and
Consigned Service Assets management. In addition, MAI will perform warranty,
installation and time and materials Services as requested by Remanco.
(b) MAI shall maintain a 7 day-24 hour dedicated national Remanco telephone
number to receive all requests for Services.
(c) MAI shall perform Services hereunder in a good, competent, professional
manner, consistent with industry standards and in material conformance with the
requirements of Service Agreements and Remanco's service policy and procedures,
attached hereto as Exhibit K.
3.3 Non-Contract Services. Any services or repairs performed on site by MAI
upon the authorization of Remanco which are not subject to coverage under the
terms of a Service Agreement between the Customer and Remanco shall be subject
to the hourly fee portal to portal as listed in Exhibit G attached hereto. MAI
will not perform any non-contract Services without first receiving Remanco's
authorization therefor. Such repairs include but are not limited to engineering
change orders, systems abuse/misuse and service during Non-Contracted Hours of
Coverage (as defined in Section 3.4 hereof).
3.4 Hours of Coverage. "Contracted Hours of Coverage" are those hours
listed in the Services Agreements corresponding to the respective contracts
during which the Customer has subscribed for on site maintenance coverage.
"Non-Contracted Hours of Coverage" are all other times except the time
identified above for the respective Customer.
4. TERM. This Agreement shall be for an initial term (the "Initial Term")
of five (5) years, commencing on the Effective Date. During the first three (3)
years of the Initial Term or until earlier prepayment of Loan, the payment
provisions in Section 6.2 and the Loan in 6.3 shall be in effect. Thereafter,
for the remaining years of the Initial Term, provided Remanco is not then in
default, the payment provisions would revert to a standard subcontract basis,
where Remanco pays to MAI monthly in advance for Contract Services to be
performed in the immediately following month. Thereafter, this Agreement shall
automatically be renewed for subsequent one (1) year terms ("Renewal Term")
unless written notice of either party's desire not to renew is sent 90 days
prior to the respective anniversary date. This Section is subject to the early
termination pursuant to Article 15.
5. SOFTWARE LICENSE.
5.1 License. Subject to the terms and conditions of this Agreement, Remanco
grants to MAI a nonexclusive license to access and use the Software to provide
Services to Customers under this Agreement. MAI acknowledges and agrees that the
Diagnostic Programs, which form a part of the Software being provided by
Remanco, are licensed and not sold to MAI hereunder. MAI agrees that the
Diagnostic Programs shall be used only by Remanco or MAI's employees, provided
such employees have executed a Confidentiality Agreement, to provide Services to
Customers. Neither MAI nor its employees, shall access, copy or use such
Diagnostic Programs unless this Agreement remains in force. MAI acknowledges and
agrees that such Diagnostic Programs may form a part of the Software residing on
the Remanco Products delivered to MAI hereunder or in the possession of
Customers and hereby grants Remanco the right to install and maintain the
Diagnostic Programs on the Remanco Products. In addition, MAI acknowledges and
agrees that Remanco may remove all or part of such Diagnostic Programs at any
time and from time to time. MAI hereby acknowledges that it is not permitted,
nor shall it permit anyone else, in any circumstances to decode, reverse
engineer, decompile or disassemble any Software.
5.2 Copyright/Trade Secret. MAI acknowledges that the Software is protected
by the copyright laws of the United States and other countries and/or that it
embodies valuable expenditure of considerable time and money by Remanco. MAI
shall hold the Software in confidence and shall not, without the prior written
consent of Remanco, disclose or otherwise make available such Software in any
form to any person, except to MAI's own employees and Customers only for
purposes specifically authorized herein, and in accordance with the appropriate
valid Software License Agreement, and confidentiality agreements. MAI agrees
that it shall obtain all copies of the Software from Remanco and, accordingly,
that the Software may not be copied or modified, in whole or in part, without
the prior written consent of Remanco, except for a reasonable number of backup
or archival copies for its own internal use pursuant to this Section 5. MAI
shall not remove or obscure any copyright, patent, trademark, trade secret or
similar notice affixed to any Software and shall reproduce and affix such notice
on any copies or modifications of the Software made with the prior written
consent of Remanco, and the inclusions of such notice shall be a condition of
that consent. MAI shall take appropriate action, by instruction, agreement or
otherwise, with respect to any persons permitted access to the Software in order
to enable MAI to satisfy its obligations hereunder. MAI agrees to cause each of
its employees having access to the Software or other confidential information of
Remanco to execute confidentiality agreements.
5.3 Escrow. On the Effective Date, Remanco shall deposit into an escrow
account with a third party escrow, or add MAI as a party to such escrow,
Remanco's proprietary Software source code, proprietary hardware and firmware
drawings and specifications and vendors list. During the Term of the Agreement,
Remanco shall promptly add to such escrow account any releases, additions,
modifications, changes or enhancements to such deposited items. The escrow
agreement is attached hereto as Exhibit J. Upon bankruptcy or a material default
by Remanco, the escrow agreement would provide access to MAI to all items
deposited into the escrow solely in order to permit MAI to perform its
obligations under the Services Agreement.
[**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT]
6. FEES.
6.1 Fees. MAI will receive [**] percent ([**]%) the contract price for
hardware maintenance for Remanco Equipment under contract maintenance. Based
upon the current Customer Service Agreements listed in Exhibit A, MAI will
receive [**] monthly. Such amount will be adjusted quarterly or earlier as
required to reflect additions or deletions from such Exhibit A. MAI will perform
installation, warranty and such other non-contract hardware maintenance services
for Remanco as authorized by Remanco on a time and material basis at the rates
set forth in Exhibit G attached hereto.
6.2 Payment of Fees. On or before the Effective Date, Remanco shall
establish a lock-box ("Remanco Daily Lock-Box") into which all Customer receipts
from Services Agreements and performance of Services shall initially be
deposited. Such Remanco Daily Lock-Box shall be under the control of Remanco, so
long as no Event of Default as defined in Section 15 of this Agreement has
occurred and is continuing, and all sums deposited therein shall be cleared on a
daily basis. Remanco shall provide to MAI a daily cash report thereof or direct
on-line access to the daily cash report. Except for[**]Remanco shall pay to MAI,
due on the 1st of each month and payable on or before the 15th of each month,
commencing January 15, 1996, [**] (representing the estimated monthly percentage
due to MAI for hardware contract maintenance, and subject to adjustment as
provided below). If any payment due hereunder is more than ten (10) days late,
in addition to all other rights and remedies available to MAI, Remanco shall pay
to MAI a late charge of One Hundred Dollars ($100.00) per day such payment is
late calculated from the payment due date. At the end of each quarter prior to
the 15th of the first month of the next quarter, Remanco and MAI will conduct a
reconciliation to determine the proper amount to have been paid by Remanco for
the hardware maintenance contract receipts during the preceding quarter and to
adjust the monthly amount for the following quarter depending upon additions
and/or deletions to the Customer Schedule. If Remanco has underpaid such amount,
Remanco will pay to MAI such underpayment. If Remanco has overpaid, the parties
will apply such overpayment against the next payment to MAI. For all
installation, warranty and other non-contract hardware maintenance services
authorized by Remanco, MAI will invoice Remanco at the contract rate on a
monthly basis and Remanco will pay to MAI the invoiced amount.
6.3 Loan. In consideration of Remanco's agreements hereunder, MAI will loan
to Remanco[**] (the "Loan") an amount equal to the amount that would otherwise
have been disbursed to MAI during the [**] Agreement is in effect. The Loan
shall be evidenced by a promissory note, attached hereto as Exhibit H, repayable
in [**] equal monthly installments commencing on [**] with interest accruing at
a rate of [**] percent ([**]%) per annum and accruing from [**]. Remanco will
receive [**] by being entitled to the receipts that would have otherwise have
been paid to MAI in October, November and December 1995 detailed in Section 6.2.
The Note, which shall be prepayable without penalty, shall be secured by a
security agreement, attached hereto as Exhibit I an the pledge of a a first
security interest in the[**]. The security interest will be released and
cancelled upon full payment of the debt.
7. REMANCO WARRANTIES AND REPRESENTATIONS. Remanco represents, warrants and
covenants that, as of the Effective Date:
7.1 No Conflicts. The execution and delivery of this Agreement by Remanco,
the consignment of the Service Assets to MAI, the assignment of the Services
Agreements to MAI, and the performance of its obligations hereunder will not
violate or conflict with any terms of the Articles of Incorporation or the
Bylaws of Remanco or constitute a breach of or (with the giving of notice or
lapse of time, or both) a default under, or result in the termination of any
right or license or the acceleration of any obligation under or the creation of
any lien, charge or other restriction on the Service Assets or Service
Agreements, or impair or terminate any licenses, permits or other contractual
relations that Remanco has with any party; and will not conflict with or, to the
best of Remanco's knowledge, violate any applicable law, regulation, judgment,
order or decree of any government, governmental instrumentality or court having
jurisdiction over Remanco.
7.2 Service Assets, Liens and Encumbrances. The Service Assets are usable
for their respective intended purposes and are adequate to perform the Services
hereunder consistent with the manner performed by Remanco prior to the Effective
Date. Remanco shall have good and marketable title to the Service Assets and
shall deliver to MAI evidence of the subordination of any liens or security
interests therein within ten (10) days after the Effective Date, and shall
deliver the Service Assets to MAI hereunder free and clear of all liens, claims,
encumbrances, restrictions, easements, security interests, charges or equities
of any nature whatsoever.
7.3 Litigation, Disputes, Claims and Investigations. To the best of
Remanco's knowledge, neither Remanco, nor any officer, director or employee of
Remanco, is a party to any pending or threatened litigation, action, suit,
dispute, investigation, claim or proceeding relating in any way to Remanco,
including, without limitation, any matters relating to Remanco's employees,
customers or taxes that would in any material way adversely affect MAI's rights
and obligations under the Agreement.
[**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT]
7.4 Employees. Exhibit B sets forth the names and addresses of all
employees of Remanco to be offered employment by MAI and lists for each (i)
their current salary; (ii) the years of service with Remanco (including any
predecessor entities; (iii) their current titles; and (iv) work locations.
Remanco shall deliver to MAI copies of all agreements with or relating to such
Employees and copies of relevant documents in their personnel files and employee
records for the past year, conditional upon consent of such Employees.
7.5 Service Agreements. Exhibit E consists of a complete list of all
agreements, contracts, licenses, commitments and proposals, oral or written, for
the provision of hardware maintenance and repair services to which Remanco is a
party and that currently are in whole or in part active or executory or pursuant
to which Remanco is or may be obligated [**] hereunder. Remanco has made and
will make available to MAI prior to the Effective Date complete and correct
copies of all written Service Agreements listed in Exhibit E (together with all
amendments and supplements thereto). Such Service Agreements are in full force
and effect, and Remanco has, and, to the best of its knowledge, all other
parties to such Service Agreements have, in all respects, performed all
obligations required to be performed by it or them and are not in default in any
material respect or condition which, after notice or lapse of time or both, is
or would constitute a material default thereunder, except as noted on Exhibit E.
7.6 No Adverse Fact and Disclosure. To the best of Remanco's knowledge,
Remanco has disclosed all facts which it reasonably believes could materially
and adversely affect the Service Assets or the Service Agreements. Remanco has
no information, nor is it aware of any facts, indicating that any of its
customers intend to cease doing business with Remanco other than in the regular
course. Further, to the best of its knowledge neither this Agreement nor any
letter, certificate or other document furnished by Remanco to MAI pursuant
hereto contains any untrue statement of a material fact or, omits to state a
material fact necessary to make the statement contained therein and in this
Agreement and its Exhibits not misleading.
8. AUDIT RIGHTS. Once per year either party may, upon reasonable notice,
audit the records of the other only to the extent that same relates directly to
the calculation of fees under this Agreement. All audits will be conducted at a
mutually convenient time and date during normal business hours. All audits are
at the expense of the party conducting same except in the case where the total
fee for the period in question (not less than a 12 month period) was incorrectly
understated by at least 5% in which case all reasonable costs to conduct the
audit shall be borne by the party being audited.
9. DISTRIBUTION OF REMANCO PRODUCTS. Subject to the terms and conditions of
this Agreement, Remanco shall appoint MAI as Remanco's nonexclusive value added
reseller to market, sell, distribute and support Remanco Products in North
America to MAI customers or prospective customers in the hotel or gaming systems
markets pursuant to a distribution agreement to be negotiated and signed prior
to October 31, 1995, incorporating the business points set forth in Exhibit M
attached hereto.
10. REMANCO RESPONSIBILITIES.
10.1 Training. During the Term of this Agreement, at the request of MAI,
Remanco shall train MAI personnel in training courses for the maintenance,
service and repair of Remanco Products. The schedule for such courses shall be
as mutually determined by Remanco and MAI. For all courses held at Remanco's
facilities, such courses shall be at no cost to MAI for the course, Remanco
trainer and course materials, provided that MAI will be responsible for all
costs of travel, lodging and expenses for its personnel in attending such
courses. For all courses held at non-Remanco locations, MAI shall pay or
reimburse Remanco for the coach-class travel and reasonable lodging and expenses
incurred by Remanco in providing its trainers for such courses.
10.2 Software Support. During the Term of this Agreement, Remanco shall be
solely responsible for providing all Software support to Customers under Service
Agreements. In consideration of MAI's agreements and covenants hereunder,
Remanco shall provide to MAI at no cost by telephone or modem Software support
required by MAI to complete any Services for Customers under Service Agreements.
10.3 Help Desk. During the Term of this Agreement, Remanco shall establish
and maintain a telephone help desk pursuant to the terms and conditions of
Services Agreements to provide technical assistance to Customers and to MAI
personnel.
11. COVENANTS.
11.1 Non Solicitation of Employees. During the Initial Term and any Renewal
Term hereof, MAI and Remanco agree that, unless prior written approval is
obtained from the other in writing, neither shall solicit, directly or
indirectly, the services of any employees of the other, including, in the case
of Remanco, any Employees hired by MAI.
11.2 Competitive Products. In partial consideration for the agreements and
covenants of Remanco hereunder, MAI shall not, during the Term of this
Agreement, sell any POS equipment in North America competitive with Remanco
Products, without Remanco's prior written consent, other than for sale to gaming
institutions by Gaming Systems International.
12. USE OF REMANCO'S TRADE NAME AND TRADEMARKS; PUBLIC RELEASE.
12.1 License to Use Trademarks. Remanco hereby grants to MAI a nonexclusive
license during the Initial Term or any Renewal Term, as applicable, to use the
Trademarks in the United States, provided that they are used solely in
connection with the servicing of the products and in accordance with Remanco's
specifications as to style, color and typeface. Upon expiration or termination
of this Agreement, MAI will immediately take all action necessary to transfer
and assign to Remanco, or its nominee, any right, title or interest in or to any
of the Trademarks, and the goodwill related thereto, which MAI may have acquired
in any manner as a result of the handling and selling of Products under this
Agreement and MAI shall immediately cease to use any Trademark of Remanco. MAI
hereby agrees to notify Remanco immediately of any infringement or potential
infringement of any Trademark in the United States.
12.2 Registration. MAI agrees not to apply for registration of any
Trademarks in the United States or for any mark confusingly similar thereto.
Remanco may elect to apply for registration of any of the Trademarks in the
United States at its expense, and, in such event, Remanco shall so notify MAI
and MAI shall assist and cooperate with Remanco in connection therewith, so long
as no costs are incurred by MAI.
12.3 Public Release. Any advertising or promotional literature or
announcement to the press by either party regarding its relationship with the
other or otherwise utilizing the other's name must be approved by both parties
hereto in advance in writing. The only authorized representation to third
parties by MAI is to identify itself as "Remanco Authorized Service
Representative" for Remanco's Systems. Such use shall be preceded by MAI's own
name.
13. INDEMNIFICATION.
13.1 MAI Indemnification. To the extent a claim or action is brought
against Remanco by a third party based on or related to MAI's failure to observe
or perform its obligations under this Agreement, MAI shall indemnify and hold
Remanco harmless from and against any and all damages, costs and expenses,
including reasonable attorney's fees, suffered by or awarded against Remanco.
13.2 Remanco Indemnification. To the extent a claim or action is brought
against MAI by a third party based on or related to: (i) Remanco's failure to
observe or perform its obligations under this Agreement; or (ii) copyright or
patent infringement, Remanco shall indemnify and hold MAI harmless from and
against any and all damages, costs and expenses, including reasonable attorney's
fees, suffered by or awarded against MAI.
13.3 Intellectual Property Infringement. Infringement Indemnification by
Remanco. At its expense, Remanco will defend any action brought against MAI or
its validly licensed Customers, and pay all reasonable expenses and damages of
MAI or its Customers, as applicable, for any claims that the Products infringe a
United States or Canadian patent or copyright ("Infringement"). MAI must notify
Remanco promptly in writing of the action (and all prior claims relating to such
action) and give Remanco sole control of the defense and negotiations for its
settlement or compromise. Remanco shall pay all damages and costs awarded
therein against MAI but shall not be responsible for any compromise made without
its consent. In the event of a final judgment which prohibits MAI's or its
Customers'
<PAGE>
[**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT]
continued use of any Product by reason of an Infringement, or if at any
time Remanco is of the opinion that any Products are likely to become the cause
of an action for Infringement, Remanco's sole obligation will be to use
reasonable commercial efforts to (a) obtain the rights to continue use of any
such Products or (b) replace or modify such Products so that they are no longer
infringing. Remanco shall have no liability for any claim of Infringement based
on the Products having been modified by MAI without the express authorization by
Remanco. THIS SECTION STATES THE ENTIRE RESPONSIBILITY OF REMANCO CONCERNING
INFRINGEMENT OF PATENTS OR OTHER INTELLECTUAL PROPERTY RIGHTS BY THE PRODUCTS,
OR PART THEREOF, OR BY THEIR OPERATION.
14. DISCLAIMERS.
(a) IN NO EVENT WILL REMANCO BE LIABLE FOR ANY (i) DAMAGES CAUSED BY MAI's
FAILURE TO PERFORM ITS COVENANTS AND RESPONSIBILITIES; (ii) DAMAGES CAUSED BY
REPAIRS OR ALTERATIONS DONE OUTSIDE OF THE SCOPE OF THIS AGREEMENT; (iii)
DAMAGES DUE TO DETERIORATION DURING PERIODS OF STORAGE BY MAI; or (iv) LOST
PROFITS, INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES.
(b) IN NO EVENT WILL MAI BE LIABLE FOR ANY (i) DAMAGES CAUSED BY REMANCO'S
FAILURE TO PERFORM ITS COVENANTS AND RESPONSIBILITIES; (ii) DAMAGES CAUSED,
RESULTING FROM OR CONTRIBUTED TO BY REPAIRS OR ALTERATIONS DONE BY ANY OTHER
PARTY AUTHORIZED BY REMANCO; (iii) DAMAGES DUE TO A CHANGE IN SPECIFICATIONS
WHERE MAI WAS NOT ADEQUATELY INFORMED OF SUCH CHANGE IN ADVANCE; (iv) DAMAGES
DUE TO DEFECTIVE PARTS AND/OR DIAGNOSTIC PROGRAMS SUPPLIED BY REMANCO; or (v)
LOST PROFITS, INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES.
(c) MAI will undertake all reasonable and necessary action permitted or
required by laws and regulations to ensure that Remanco's limits of
responsibility as set forth above are valid and enforceable against whomever
they are applicable, so longs as such action is at no cost to MAI. MAI will
immediately inform Remanco as soon as MAI becomes aware of liability claims by a
third party against the Products.
15. TERMINATION AND REMEDIES.
15.1 Default. Upon a material breach of either party of any of its
obligations or covenants herein agreed to, the non-defaulting party shall send
the defaulting party notice detailing the default. The defaulting party shall
have 30 days to cure said default unless said party commences to cure said
default within the 30 days, acting in good faith, and it is reasonably necessary
that the cure period be extended. In such case the cure period shall be extended
to a reasonable period not to exceed an additional 30 days. Should the default
not be cured within the time period identified above, an "Event of Default" will
be said to have occurred.
15.2 Default by Remanco. In the event of (i) bankruptcy (ii) insolvency or
(iii) Event of Default by Remanco for failure to pay to MAI amounts due under
the Agreement and failure to cure such default in full within thirty (30) days
of MAI's written notice, Remanco will (i) transfer title to [**] to MAI pursuant
to the security interest, if then existent; (ii) transfer to MAI control of the
Remanco Daily Lock-Box; and (iii) direct release of the Software source code
held in escrow. MAI will thereupon perform the daily accounting of the receipts
in the Remanco Daily Lock-Box and direct payment to MAI of (a) 100% of the total
Services Agreements receipts and (b) 100% of the non-contract hardware
maintenance (T&M) receipts and direct payment to Remanco of all other receipts
not paid to MAI. MAI will at MAI's option either perform the Software support or
will pay to Remanco a fee as determined by MAI and Remanco for Remanco's
performance of Software support. MAI will be responsible for purchasing all
necessary replacement Equipment and Parts necessary to perform Services and
perform or pay Remanco for performing Customer invoicing and first call support.
In the event of Remanco's material default, provided that Remanco [**]fully
cures the default and operates with full capability to perform under the
Agreement for a minimum period of [**], it is the intent of the parties that MAI
will [**] to Remanco, return control of the Remanco Daily Lock-Box to Remanco,
return the Software source code into escrow and otherwise revert to the terms
and coditions of the Agreement prior to default. In the event of a Chapter 11
bankruptcy, it is the intent of the parties that upon issuance by the bankruptcy
court of the order finally adopting and approving a Plan of Reorganization which
confirms this Agreement, permits Remanco to meet all of its material obligations
hereunder and Remanco has cured all defaults hereunder, including repayment of
the Loan, MAI will transfer title to the Service Assets to Remanco, return
control of the Remanco Daily Lock-Box to Remanco, return Software source code
into escrow and otherwise revert to the terms and conditions of the Agreement
prior to the Chapter 11 bankruptcy. The above remedies are not exclusive and are
cumulative and are in addition to all other remedies hereunder, at law or in
equity.
15.3 Termination by Remanco. Upon the occurrence of (i) bankruptcy;
(ii)insolvency or (iii) an Event of Default by MAI, Remanco may send written
notice to MAI terminating the Agreement at any time after (5) business days.
Upon the expiration or termination of this Agreement for any reason the
following shall occur:
(i) MAI shall immediately cease from acting as an Authorized Service
Representative.
(ii) MAI shall promptly return to Remanco any and all Remanco-owned Parts
or other equipment, materials, documentation or data, including without
limitation all software, firmware, and all Remanco confidential information in
the possession of MAI for whatever reason or purpose.
(iii) The parties shall immediately pay to each other all monies due and
payable under the terms of the Agreement.
15.4 Injunctive Relief. Because unauthorized use or transfer of the
Software or the Diagnostic Programs, or any information contained therein, or
any other Remanco confidential information would diminish substantially the
value of such materials and would irrevocably harm Remanco, if MAI breaches the
provisions of Sections 5.1, 5.2 or 16.3 of this Agreement, Remanco shall
(without limiting its other rights or remedies) be entitled to equitable relief
(including but not limited to injunctive relief) to protect its interests and,
if MAI has not returned the Software, Diagnostic Programs or any other Remanco
confidential information, to Remanco, or certified to Remanco's satisfaction
that the Software, Diagnostic Programs or any other Remanco confidential
information has been destroyed. Remanco shall have the right to enter and take
possession of the Software, Diagnostic Programs or any other Remanco
confidential information, wherever located, without liability for damage, so
long as Remanco shall have acted reasonably and in good faith.
16. GENERAL.
16.1 Assignment. The rights and obligations under this Agreement are
personal in character. Neither this Agreement nor any rights granted hereunder
may be assigned by either party voluntarily or by operation of law without the
other party's prior written consent, not to be unreasonably withheld, and any
such attempted assignment shall be null and void. The Agreement shall inure to
the benefit of and be binding upon any successors or assigns of the parties.
16.2 Force Majeure. Neither party shall be liable for any loss, injury,
delay or damage suffered or incurred by such other party for causes beyond its
reasonable control.
16.3 Confidentiality. Remanco and MAI agree that in addition to the
software, certain information, whether in oral, written and/or any other form,
supplied by one party under this Agreement to the other party during the course
of this Agreement is proprietary, secret or confidential. This information
includes, without limitation, all information with respect to the Remanco
Products, including marketing plans, product developmental materials, training
documentation, Software documentation and maintenance manuals and drawings. All
such information shall be held in confidence for a period of five (5) years
following the date of disclosure and shall be used only for the purposes of this
Agreement.
16.4 Relationship of the Parties. Remanco and MAI hereby acknowledge that
both parties hereto are independent contractors. Neither party shall represent
itself as a partner, joint-venture, agent, employee or general representative of
the other. Both parties hereto acknowledge that they shall have no right power
or authority to, in any way, obligate the other party to any contract or other
obligation.
16.5 Entire Agreement. This Agreement is the exclusive statement of the
terms and conditions between the parties with respect to its subject matter as
of its date, supersedes all prior agreements, negotiations, representations and
proposals, written or oral.
16.6 Notices. All notices and other communications in connection with the
Agreement shall be in writing and shall be sent to the respective parties
following addresses, or to such other addresses as may be designated by the
parties in writing from time to time in accordance with this Section, by hand,
or by registered or certified air mail, postage prepaid, or by express courier
service, service fee prepaid. In the case of Remanco, no such notice, waiver or
other written notice from Remanco under the terms of this Agreement shall have
any force or effect unless it is signed by either the President, Chief Executive
Officer or Chief Operating Officer of Remanco.
TO REMANCO: Remanco International, Inc.
260 Fordham Road
Wilmington, MA 01887
Fax: (508)658-5998
Attention: Chief Operating Officer
TO MAI: MAI Systems Corporation
9600 Jeronimo Road
Irvine, CA 92718
Fax: (714)580-2378
Attention: Vice President and General Counsel
All notices shall be deemed received (i) if given by hand, (ii) if
given by air mail three (3) business days after posting, or (iii) if given by
express courier service, the next business day in the jurisdiction of the
recipient.
16.7 Severability. If any provision of this Agreement or the application
thereof to any party or circumstances shall be declared void, illegal or
unenforceable, the remainder of this Agreement shall be valid and enforceable to
the extent permitted by law. In such event, the parties shall use their best
efforts to replace the invalid or unenforceable provision by a provision that,
to the extent permitted by the applicable law, achieves the purposes intended
under the invalid or unenforceable provision. Any deviation by either party from
the terms and provisions of this Agreement in order to comply with applicable
laws, rules or regulations shall not be considered a breach of the Agreement.
IN WITNESS WHEREOF, Remanco and MAI hereby have duly executed this
Agreement as of the Effective Date.
REMANCO INTERNATIONAL, INC. MAI SYSTEMS CORPORATION
By:____________________________ By:____________________________
Roy S. Roberts George G. Bayz
Chief Operating Officer President and
Chief Operating Officer
Date:___________________________ Date:__________________________
Attest:_________________________ Attest:________________________
<PAGE>
EXHIBIT INDEX
Exhibit No. Exhibit
A Services Agreement List
B Employees
C Remanco Products (Equipment and Software)
D Parts
E Form Remanco Service Agreement
F T/R Equipment
G MAI Service Rates
H Promissory Note
I Security Agreement
J Escrow Agreement
K Remanco Service Policy
L Remanco National Accounts
M Distribution Agreement Business Outline
15
EX 1-1
<PAGE>
EXHIBIT A
SERVICE AGREEMENTS
Attached hereto is the list of Services Agreement, entitled "US Service
Revenue," pages 16-1 through 16-15.
16
EX 1-2
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware
Software
[**] [**] [**] BC 154583 [**] [**] [**] [**]
[**] [**] [**] BC 111266 [**] [**] [**] [**]
[**] [**] [**] IC 137075 [**] [**] [**] [**]
[**] [**] [**] IC 121087 [**] [**] [**] [**]
[**] [**] [**] IC 121087 [**] [**] [**] [**]
[**] [**] [**] BC 145177 [**] [**] [**] [**]
[**] [**] [**] BC 135079 [**] [**] [**] [**]
[**] [**] [**] EC 116954-01 [**] [**] [**] [**]
[**] [**] [**] EC 148296-01 [**] [**] [**] [**]
[**] [**] [**] EC 148296-02 [**] [**] [**] [**]
[**] [**] [**] BC 135053 [**] [**] [**] [**]
[**] [**] [**] BC 148197 [**] [**] [**] [**]
[**] [**] [**] BC 109934 [**] [**] [**] [**]
[**] [**] [**] BC 135046 [**] [**] [**] [**]
[**] [**] [**] BC 111773 [**] [**] [**] [**]
[**] [**] [**] BC 150243 [**] [**] [**] [**]
[**] [**] [**] BC 153932 [**] [**] [**] [**]
[**] [**] [**] BC 146704 [**] [**] [**] [**]
[**] [**] [**] EC 118323 [**] [**] [**] [**]
[**] [**] [**] IC 138143 [**] [**] [**] [**]
[**] [**] [**] DC 117002 [**] [**] [**] [**]
[**] [**] [**] IC 138143 [**] [**] [**] [**]
[**] [**] [**] DC 117002 [**] [**] [**] [**]
[**] [**] [**] IC 142307 [**] [**] [**] [**]
[**] [**] [**] BC 109918 [**] [**] [**] [**]
[**] [**] [**] 112706 [**] [**] [**] [**]
[**] [**] [**] BC 143255 [**] [**] [**] [**]
[**] [**] [**] IC 152322 [**] [**] [**] [**]
[**] [**] [**] IC 143610-03 [**] [**] [**] [**]
[**] [**] [**] IC 143610-02 [**] [**] [**] [**]
[**] [**] [**] IC 143610-01 [**] [**] [**] [**]
[**] [**] [**] BC 147983 [**] [**] [**] [**]
[**] [**] [**] DC 153650 [**] [**] [**] [**]
[**] [**] [**] BC 111732 [**] [**] [**] [**]
[**] [**] [**] BC 153445 [**] [**] [**] [**]
[**] [**] [**] BC 154773 [**] [**] [**] [**]
[**] [**] [**] BC 154706 [**] [**] [**] [**]
[**] [**] [**] BC 115139 [**] [**] [**] [**]
[**] [**] [**] BC 148924 [**] [**] [**] [**]
[**] [**] [**] BC 114934 [**] [**] [**] [**]
[**] [**] [**] BC 111112 [**] [**] [**] [**]
[**] [**] [**] BC 141867 [**] [**] [**] [**]
[**] [**] [**] BC 135796 [**] [**] [**] [**]
[**] [**] [**] BC 154690 [**] [**] [**] [**]
[**] [**] [**] BC 139345 [**] [**] [**] [**]
[**] [**] [**] EC 110692 [**] [**] [**] [**]
[**] [**] [**] BC 118448 [**] [**] [**] [**]
[**] [**] [**] DC 153906 [**] [**] [**] [**]
[**] [**] [**] BC 148585 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-1
EX 1-3
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 154682 [**] [**] [**] [**]
[**] [**] [**] BC 139014 [**] [**] [**] [**]
[**] [**] [**] EC 153072 [**] [**] [**] [**]
[**] [**] [**] BC 148464 [**] [**] [**] [**]
[**] [**] [**] BC 113589 [**] [**] [**] [**]
[**] [**] [**] BC 114967 [**] [**] [**] [**]
[**] [**] [**] EC 153817 [**] [**] [**] [**]
[**] [**] [**] BC 139022 [**] [**] [**] [**]
[**] [**] [**] BC 152025 [**] [**] [**] [**]
[**] [**] [**] BC 113399 [**] [**] [**] [**]
[**] [**] [**] BC 118299 [**] [**] [**] [**]
[**] [**] [**] BC 114447 [**] [**] [**] [**]
[**] [**] [**] BC 154849 [**] [**] [**] [**]
[**] [**] [**] IC 154294 [**] [**] [**] [**]
[**] [**] [**] DC 118521 [**] [**] [**] [**]
[**] [**] [**] BC 153544 [**] [**] [**] [**]
[**] [**] [**] BC 153734 [**] [**] [**] [**]
[**] [**] [**] BC 115170 [**] [**] [**] [**]
[**] [**] [**] EC 149930 [**] [**] [**] [**]
[**] [**] [**] BC 154021 [**] [**] [**] [**]
[**] [**] [**] IC 113704 [**] [**] [**] [**]
[**] [**] [**] BC 154039 [**] [**] [**] [**]
[**] [**] [**] BC 153545 [**] [**] [**] [**]
[**] [**] [**] BC 140343-01 [**] [**] [**] [**]
[**] [**] [**] BC 140343-02 [**] [**] [**] [**]
[**] [**] [**] BC 140343-03 [**] [**] [**] [**]
[**] [**] [**] BC 132340 [**] [**] [**] [**]
[**] [**] [**] DC 110619 [**] [**] [**] [**]
[**] [**] [**] BC 151761 [**] [**] [**] [**]
[**] [**] [**] BC 132365 [**] [**] [**] [**]
[**] [**] [**] W 114686 [**] [**] [**] [**]
[**] [**] [**] BC 154781 [**] [**] [**] [**]
[**] [**] [**] BC 107250 [**] [**] [**] [**]
[**] [**] [**] BC 146696 [**] [**] [**] [**]
[**] [**] [**] BC 111799 [**] [**] [**] [**]
[**] [**] [**] BC 137331 [**] [**] [**] [**]
[**] [**] [**] BC 111898 [**] [**] [**] [**]
[**] [**] [**] IC 132290 [**] [**] [**] [**]
[**] [**] [**] BC 153361 [**] [**] [**] [**]
[**] [**] [**] BC 151894 [**] [**] [**] [**]
[**] [**] [**] BC 131896 [**] [**] [**] [**]
[**] [**] [**] BC 153791 [**] [**] [**] [**]
[**] [**] [**] BC 154070 [**] [**] [**] [**]
[**] [**] [**] DC 111054 [**] [**] [**] [**]
[**] [**] [**] BC 151928 [**] [**] [**] [**]
[**] [**] [**] DC 154534 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-2
EX 1-4
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 114231 [**] [**] [**] [**]
[**] [**] [**] BC 115899 [**] [**] [**] [**]
[**] [**] [**] BC 154047 [**] [**] [**] [**]
[**] [**] [**] BC 153189 [**] [**] [**] [**]
[**] [**] [**] BC 108340 [**] [**] [**] [**]
[**] [**] [**] EC 113076 [**] [**] [**] [**]
[**] [**] [**] IC 137885 [**] [**] [**] [**]
[**] [**] [**] BC 153916 [**] [**] [**] [**]
[**] [**] [**] BC 115083 [**] [**] [**] [**]
[**] [**] [**] BC 151548 [**] [**] [**] [**]
[**] [**] [**] BC 110338 [**] [**] [**] [**]
[**] [**] [**] BC 118257 [**] [**] [**] [**]
[**] [**] [**] BC 117820 [**] [**] [**] [**]
[**] [**] [**] BC 154914 [**] [**] [**] [**]
[**] [**] [**] BC 153478 [**] [**] [**] [**]
[**] [**] [**] BC 153957 [**] [**] [**] [**]
[**] [**] [**] BC 151605 [**] [**] [**] [**]
[**] [**] [**] IC 151621 [**] [**] [**] [**]
[**] [**] [**] BC 153452 [**] [**] [**] [**]
[**] [**] [**] BC 143271 [**] [**] [**] [**]
[**] [**] [**] BC 114835 [**] [**] [**] [**]
[**] [**] [**] BC 152694 [**] [**] [**] [**]
[**] [**] [**] EC 148981 [**] [**] [**] [**]
[**] [**] [**] BC 146837 [**] [**] [**] [**]
[**] [**] [**] EC 147157 [**] [**] [**] [**]
[**] [**] [**] BC 113647 [**] [**] [**] [**]
[**] [**] [**] BC 134270 [**] [**] [**] [**]
[**] [**] [**] EC 152256 [**] [**] [**] [**]
[**] [**] [**] BC 152199 [**] [**] [**] [**]
[**] [**] [**] BC 153775 [**] [**] [**] [**]
[**] [**] [**] BC 152165 [**] [**] [**] [**]
[**] [**] [**] BC 152181 [**] [**] [**] [**]
[**] [**] [**] BC 146621 [**] [**] [**] [**]
[**] [**] [**] BC 152157 [**] [**] [**] [**]
[**] [**] [**] EC 147397 [**] [**] [**] [**]
[**] [**] [**] BC 134288 [**] [**] [**] [**]
[**] [**] [**] BC 152116 [**] [**] [**] [**]
[**] [**] [**] IC 147660 [**] [**] [**] [**]
[**] [**] [**] BC 152116 [**] [**] [**] [**]
[**] [**] [**] IC 147660 [**] [**] [**] [**]
[**] [**] [**] BC 152173 [**] [**] [**] [**]
[**] [**] [**] BC 152223 [**] [**] [**] [**]
[**] [**] [**] BC 153593 [**] [**] [**] [**]
[**] [**] [**] BC 152637 [**] [**] [**] [**]
[**] [**] [**] BC 152132 [**] [**] [**] [**]
[**] [**] [**] BC 153312 [**] [**] [**] [**]
[**] [**] [**] BC 152140 [**] [**] [**] [**]
[**] [**] [**] BC 146583 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-3
EX 1-5
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] IC 117994-15 [**] [**] [**] [**]
[**] [**] [**] IC 117994-13 [**] [**] [**] [**]
[**] [**] [**] BC 115182 [**] [**] [**] [**]
[**] [**] [**] BC 129403 [**] [**] [**] [**]
[**] [**] [**] BC 152892 [**] [**] [**] [**]
[**] [**] [**] IC 152348 [**] [**] [**] [**]
[**] [**] [**] BC 115188 [**] [**] [**] [**]
[**] [**] [**] IC 121061 [**] [**] [**] [**]
[**] [**] [**] BC 152488 [**] [**] [**] [**]
[**] [**] [**] BC 153486 [**] [**] [**] [**]
[**] [**] [**] BC 117325 [**] [**] [**] [**]
[**] [**] [**] BC 109470 [**] [**] [**] [**]
[**] [**] [**] BC 113639 [**] [**] [**] [**]
[**] [**] [**] BC 110148 [**] [**] [**] [**]
[**] [**] [**] BC 142349 [**] [**] [**] [**]
[**] [**] [**] BC 114918-0 [**] [**] [**] [**]
[**] [**] [**] IC 147777 [**] [**] [**] [**]
[**] [**] [**] BC 115733 [**] [**] [**] [**]
[**] [**] [**] BC 141218 [**] [**] [**] [**]
[**] [**] [**] EC 144816 [**] [**] [**] [**]
[**] [**] [**] BC 116798 [**] [**] [**] [**]
[**] [**] [**] BC 144824 [**] [**] [**] [**]
[**] [**] [**] BC 137166 [**] [**] [**] [**]
[**] [**] [**] EC 146910 [**] [**] [**] [**]
[**] [**] [**] W 106484 [**] [**] [**] [**]
[**] [**] [**] EC 116848 [**] [**] [**] [**]
[**] [**] [**] BC 143388 [**] [**] [**] [**]
[**] [**] [**] BC 130310 [**] [**] [**] [**]
[**] [**] [**] BC 109668 [**] [**] [**] [**]
[**] [**] [**] BC 115055-41 [**] [**] [**] [**]
[**] [**] [**] IC 110627 [**] [**] [**] [**]
[**] [**] [**] BC 114173 [**] [**] [**] [**]
[**] [**] [**] BC 153288 [**] [**] [**] [**]
[**] [**] [**] BC 152680 [**] [**] [**] [**]
[**] [**] [**] BC 107599 [**] [**] [**] [**]
[**] [**] [**] BC 137802 [**] [**] [**] [**]
[**] [**] [**] BC 153502 [**] [**] [**] [**]
[**] [**] [**] BC 108027 [**] [**] [**] [**]
[**] [**] [**] BC 116830 [**] [**] [**] [**]
[**] [**] [**] EC 110528 [**] [**] [**] [**]
[**] [**] [**] IC 112532 [**] [**] [**] [**]
[**] [**] [**] BC 150151 [**] [**] [**] [**]
[**] [**] [**] BC 15352 [**] [**] [**] [**]
[**] [**] [**] EC 154096 [**] [**] [**] [**]
[**] [**] [**] DC 154559 [**] [**] [**] [**]
[**] [**] [**] BC 153155 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-4
EX 1-5
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] EC 153726 [**] [**] [**] [**]
[**] [**] [**] BC 108357 [**] [**] [**] [**]
[**] [**] [**] IC 116251 [**] [**] [**] [**]
[**] [**] [**] BC 109660 [**] [**] [**] [**]
[**] [**] [**] BC 108365 [**] [**] [**] [**]
[**] [**] [**] BC 111872 [**] [**] [**] [**]
[**] [**] [**] IC 113548 [**] [**] [**] [**]
[**] [**] [**] IC 152009 [**] [**] [**] [**]
[**] [**] [**] BC 138347 [**] [**] [**] [**]
[**] [**] [**] BC 150045 [**] [**] [**] [**]
[**] [**] [**] BC 151381 [**] [**] [**] [**]
[**] [**] [**] BC 139426 [**] [**] [**] [**]
[**] [**] [**] W 154450 [**] [**] [**] [**]
[**] [**] [**] BC 115246 [**] [**] [**] [**]
[**] [**] [**] BC 143990 [**] [**] [**] [**]
[**] [**] [**] BC 153056 [**] [**] [**] [**]
[**] [**] [**] IC 114819 [**] [**] [**] [**]
[**] [**] [**] BC 138438 [**] [**] [**] [**]
[**] [**] [**] BC 150367 [**] [**] [**] [**]
[**] [**] [**] BC 141069 [**] [**] [**] [**]
[**] [**] [**] EC 121343 [**] [**] [**] [**]
[**] [**] [**] IC 130153 [**] [**] [**] [**]
[**] [**] [**] BC 131003-005 [**] [**] [**] [**]
[**] [**] [**] BC 131003-004 [**] [**] [**] [**]
[**] [**] [**] BC 131003-003 [**] [**] [**] [**]
[**] [**] [**] IC 149104 [**] [**] [**] [**]
[**] [**] [**] BC 152793 [**] [**] [**] [**]
[**] [**] [**] EC 149161 [**] [**] [**] [**]
[**] [**] [**] BC 147850 [**] [**] [**] [**]
[**] [**] [**] BC 113795 [**] [**] [**] [**]
[**] [**] [**] DEPOT 154260 [**] [**] [**] [**]
[**] [**] [**] IC 117291-06 [**] [**] [**] [**]
[**] [**] [**] IC 117291-25 [**] [**] [**] [**]
[**] [**] [**] BC 147991 [**] [**] [**] [**]
[**] [**] [**] IC 121038 [**] [**] [**] [**]
[**] [**] [**] BC 142356 [**] [**] [**] [**]
[**] [**] [**] IC 109603 [**] [**] [**] [**]
[**] [**] [**] BC 108159 [**] [**] [**] [**]
[**] [**] [**] BC 148429 [**] [**] [**] [**]
[**] [**] [**] BC 154179 [**] [**] [**] [**]
[**] [**] [**] BC 148650 [**] [**] [**] [**]
[**] [**] [**] EC 142232 [**] [**] [**] [**]
[**] [**] [**] BC 153460 [**] [**] [**] [**]
[**] [**] [**] IC 139673 [**] [**] [**] [**]
[**] [**] [**] BC 138945 [**] [**] [**] [**]
[**] [**] [**] DEPOT 154344 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-5
EX 1-7
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 147454 [**] [**] [**] [**]
[**] [**] [**] BC 145144-01 [**] [**] [**] [**]
[**] [**] [**] BC 145144-03 [**] [**] [**] [**]
[**] [**] [**] BC 145144-02 [**] [**] [**] [**]
[**] [**] [**] BC 139907 [**] [**] [**] [**]
[**] [**] [**] BC 138040 [**] [**] [**] [**]
[**] [**] [**] BC 121350 [**] [**] [**] [**]
[**] [**] [**] EC 137323 [**] [**] [**] [**]
[**] [**] [**] BC 151480 [**] [**] [**] [**]
[**] [**] [**] BC 148502 [**] [**] [**] [**]
[**] [**] [**] BC 121335 [**] [**] [**] [**]
[**] [**] [**] EC 142224 [**] [**] [**] [**]
[**] [**] [**] BC 131797 [**] [**] [**] [**]
[**] [**] [**] EC 135889 [**] [**] [**] [**]
[**] [**] [**] IC 119826 [**] [**] [**] [**]
[**] [**] [**] BC 153221 [**] [**] [**] [**]
[**] [**] [**] BC 154054 [**] [**] [**] [**]
[**] [**] [**] BC 120972 [**] [**] [**] [**]
[**] [**] [**] BC 153106 [**] [**] [**] [**]
[**] [**] [**] BC 121533 [**] [**] [**] [**]
[**] [**] [**] BC 153866 [**] [**] [**] [**]
[**] [**] [**] BC 138834 [**] [**] [**] [**]
[**] [**] [**] BC 154153 [**] [**] [**] [**]
[**] [**] [**] EC 132944-35 [**] [**] [**] [**]
[**] [**] [**] EC 132944-36 [**] [**] [**] [**]
[**] [**] [**] IC 107722 [**] [**] [**] [**]
[**] [**] [**] BC 120451 [**] [**] [**] [**]
[**] [**] [**] BC 119362 [**] [**] [**] [**]
[**] [**] [**] EC 131839-001 [**] [**] [**] [**]
[**] [**] [**] EC 131839-003 [**] [**] [**] [**]
[**] [**] [**] EC 131839-002 [**] [**] [**] [**]
[**] [**] [**] IC 151209 [**] [**] [**] [**]
[**] [**] [**] BC 132993 [**] [**] [**] [**]
[**] [**] [**] EC 119057-01 [**] [**] [**] [**]
[**] [**] [**] BC 154930 [**] [**] [**] [**]
[**] [**] [**] BC 136584 [**] [**] [**] [**]
[**] [**] [**] EC 130237 [**] [**] [**] [**]
[**] [**] [**] EC 119917 [**] [**] [**] [**]
[**] [**] [**] DC 135095 [**] [**] [**] [**]
[**] [**] [**] IC 130161 [**] [**] [**] [**]
[**] [**] [**] EC 120766-11 [**] [**] [**] [**]
[**] [**] [**] EC 120766-10 [**] [**] [**] [**]
[**] [**] [**] EC 137810 [**] [**] [**] [**]
[**] [**] [**] BC 140418 [**] [**] [**] [**]
[**] [**] [**] BC 147082 [**] [**] [**] [**]
[**] [**] [**] BC 154922 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-6
EX 1-8
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 150995 [**] [**] [**] [**]
[**] [**] [**] EC 143834 [**] [**] [**] [**]
[**] [**] [**] BC 153296 [**] [**] [**] [**]
[**] [**] [**] EC 136747 [**] [**] [**] [**]
[**] [**] [**] DEPOT 154013 [**] [**] [**] [**]
[**] [**] [**] BC 120667 [**] [**] [**] [**]
[**] [**] [**] BC 150581 [**] [**] [**] [**]
[**] [**] [**] IC 139881 [**] [**] [**] [**]
[**] [**] [**] BC 136754-02 [**] [**] [**] [**]
[**] [**] [**] BC 136754-01 [**] [**] [**] [**]
[**] [**] [**] BC 153759 [**] [**] [**] [**]
[**] [**] [**] BC 153437 [**] [**] [**] [**]
[**] [**] [**] EC 119370-01 [**] [**] [**] [**]
[**] [**] [**] EC 119370-02 [**] [**] [**] [**]
[**] [**] [**] BC 155010 [**] [**] [**] [**]
[**] [**] [**] IC 142265 [**] [**] [**] [**]
[**] [**] [**] DC 154591 [**] [**] [**] [**]
[**] [**] [**] IC 143784 [**] [**] [**] [**]
[**] [**] [**] EC 119481 [**] [**] [**] [**]
[**] [**] [**] BC 152041 [**] [**] [**] [**]
[**] [**] [**] BC 121525 [**] [**] [**] [**]
[**] [**] [**] BC 139840 [**] [**] [**] [**]
[**] [**] [**] IC 119388-034 [**] [**] [**] [**]
[**] [**] [**] IC 119388-035 [**] [**] [**] [**]
[**] [**] [**] EC 120121 [**] [**] [**] [**]
[**] [**] [**] BC 119123 [**] [**] [**] [**]
[**] [**] [**] BC 119131 [**] [**] [**] [**]
[**] [**] [**] IC 121509-04 [**] [**] [**] [**]
[**] [**] [**] IC 121509-04 [**] [**] [**] [**]
[**] [**] [**] 120220 [**] [**] [**] [**]
[**] [**] [**] EC 151019 [**] [**] [**] [**]
[**] [**] [**] BC 152850 [**] [**] [**] [**]
[**] [**] [**] EC 151423 [**] [**] [**] [**]
[**] [**] [**] BC 132860 [**] [**] [**] [**]
[**] [**] [**] BC 152736 [**] [**] [**] [**]
[**] [**] [**] IC 131292 [**] [**] [**] [**]
[**] [**] [**] EC 119735 [**] [**] [**] [**]
[**] [**] [**] BC 153858 [**] [**] [**] [**]
[**] [**] [**] BC 120956 [**] [**] [**] [**]
[**] [**] [**] BC 120014 [**] [**] [**] [**]
[**] [**] [**] BC 153589 [**] [**] [**] [**]
[**] [**] [**] IC 154252 [**] [**] [**] [**]
[**] [**] [**] BC 143776 [**] [**] [**] [**]
[**] [**] [**] EC 119495-003 [**] [**] [**] [**]
[**] [**] [**] EC 119495-002 [**] [**] [**] [**]
[**] [**] [**] DC 120097 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. o Company Confidential 9/21/95
16-7
EX 1-9
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 153783 [**] [**] [**] [**]
[**] [**] [**] IC 121053 [**] [**] [**] [**]
[**] [**] [**] EC 151415 [**] [**] [**] [**]
[**] [**] [**] NC 119396 [**] [**] [**] [**]
[**] [**] [**] IC 144634 [**] [**] [**] [**]
[**] [**] [**] BC 150771 [**] [**] [**] [**]
[**] [**] [**] EC 119529 [**] [**] [**] [**]
[**] [**] [**] IC 153403 [**] [**] [**] [**]
[**] [**] [**] W 154617 [**] [**] [**] [**]
[**] [**] [**] BC 149286 [**] [**] [**] [**]
[**] [**] [**] BC 149021 [**] [**] [**] [**]
[**] [**] [**] BC 119727 [**] [**] [**] [**]
[**] [**] [**] BC 154419 [**] [**] [**] [**]
[**] [**] [**] BC 118877 [**] [**] [**] [**]
[**] [**] [**] EC 120675 [**] [**] [**] [**]
[**] [**] [**] BC 131557 [**] [**] [**] [**]
[**] [**] [**] DC 154138 [**] [**] [**] [**]
[**] [**] [**] BC 121095 [**] [**] [**] [**]
[**] [**] [**] IC 121160 [**] [**] [**] [**]
[**] [**] [**] BC 121186 [**] [**] [**] [**]
[**] [**] [**] BC 132787 [**] [**] [**] [**]
[**] [**] [**] BC 138230 [**] [**] [**] [**]
[**] [**] [**] BC 153833 [**] [**] [**] [**]
[**] [**] [**] BC 126573 [**] [**] [**] [**]
[**] [**] [**] IC 138784 [**] [**] [**] [**]
[**] [**] [**] BC 134080 [**] [**] [**] [**]
[**] [**] [**] BC 151589 [**] [**] [**] [**]
[**] [**] [**] BC 121327 [**] [**] [**] [**]
[**] [**] [**] BC 152843 [**] [**] [**] [**]
[**] [**] [**] EC 144105-02 [**] [**] [**] [**]
[**] [**] [**] EC 144105-01 [**] [**] [**] [**]
[**] [**] [**] BC 144212 [**] [**] [**] [**]
[**] [**] [**] BC 120204 [**] [**] [**] [**]
[**] [**] [**] BC 149260 [**] [**] [**] [**]
[**] [**] [**] BC 129437 [**] [**] [**] [**]
[**] [**] [**] BC 150789 [**] [**] [**] [**]
[**] [**] [**] BC 132092 [**] [**] [**] [**]
[**] [**] [**] EC 143131 [**] [**] [**] [**]
[**] [**] [**] BC 153676 [**] [**] [**] [**]
[**] [**] [**] NC 127886 [**] [**] [**] [**]
[**] [**] [**] BC 154062 [**] [**] [**] [**]
[**] [**] [**] BC 136556 [**] [**] [**] [**]
[**] [**] [**] BC 148148 [**] [**] [**] [**]
[**] [**] [**] DC 154809 [**] [**] [**] [**]
[**] [**] [**] IC 151910 [**] [**] [**] [**]
[**] [**] [**] BC 148437 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-8
EX 1-10
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 147926 [**] [**] [**] [**]
[**] [**] [**] BC 144253 [**] [**] [**] [**]
[**] [**] [**] BC 145037 [**] [**] [**] [**]
[**] [**] [**] BC 146712 [**] [**] [**] [**]
[**] [**] [**] BC 143144 [**] [**] [**] [**]
[**] [**] [**] BC 145045 [**] [**] [**] [**]
[**] [**] [**] BC 145003 [**] [**] [**] [**]
[**] [**] [**] BC 153874 [**] [**] [**] [**]
[**] [**] [**] EC 152934 [**] [**] [**] [**]
[**] [**] [**] BC 137711 [**] [**] [**] [**]
[**] [**] [**] BC 136820 [**] [**] [**] [**]
[**] [**] [**] BC 125211 [**] [**] [**] [**]
[**] [**] [**] BC 150623 [**] [**] [**] [**]
[**] [**] [**] BC 151704 [**] [**] [**] [**]
[**] [**] [**] EC 137380 [**] [**] [**] [**]
[**] [**] [**] IC 150292 [**] [**] [**] [**]
[**] [**] [**] EC 123638 [**] [**] [**] [**]
[**] [**] [**] IC 150417 [**] [**] [**] [**]
[**] [**] [**] BC 153122 [**] [**] [**] [**]
[**] [**] [**] BC 139360 [**] [**] [**] [**]
[**] [**] [**] BC 153114 [**] [**] [**] [**]
[**] [**] [**] BC 126045 [**] [**] [**] [**]
[**] [**] [**] BC 151936 [**] [**] [**] [**]
[**] [**] [**] EC 137646 [**] [**] [**] [**]
[**] [**] [**] BC 154286 [**] [**] [**] [**]
[**] [**] [**] BC 152942 [**] [**] [**] [**]
[**] [**] [**] EC 124099 [**] [**] [**] [**]
[**] [**] [**] BC 147678 [**] [**] [**] [**]
[**] [**] [**] BC 152652 [**] [**] [**] [**]
[**] [**] [**] EC 139725 [**] [**] [**] [**]
[**] [**] [**] BC 153130 [**] [**] [**] [**]
[**] [**] [**] BC 150250 [**] [**] [**] [**]
[**] [**] [**] BC 153627 [**] [**] [**] [**]
[**] [**] [**] BC 148866 [**] [**] [**] [**]
[**] [**] [**] BC 148874 [**] [**] [**] [**]
[**] [**] [**] BC 148613 [**] [**] [**] [**]
[**] [**] [**] BC 152876 [**] [**] [**] [**]
[**] [**] [**] BC 131185 [**] [**] [**] [**]
[**] [**] [**] IC 148445 [**] [**] [**] [**]
[**] [**] [**] BC 134395 [**] [**] [**] [**]
[**] [**] [**] BC 134106 [**] [**] [**] [**]
[**] [**] [**] BC 147595 [**] [**] [**] [**]
[**] [**] [**] DC 154542 [**] [**] [**] [**]
[**] [**] [**] BC 144170 [**] [**] [**] [**]
[**] [**] [**] IC 154237 [**] [**] [**] [**]
[**] [**] [**] DC 154104 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-9
EX 1-11
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 154500 [**] [**] [**] [**]
[**] [**] [**] BC 153379 [**] [**] [**] [**]
[**] [**] [**] IC 147009-003 [**] [**] [**] [**]
[**] [**] [**] IC 149009-002 [**] [**]**] [**]
[**] [**] [**] IC 149009-001 [**] [**] [**] [**]
[**] [**] [**] BC 154088 [**] [**] [**] [**]
[**] [**] [**] BC 150615 [**] [**] [**] [**]
[**] [**] [**] BC 151399 [**] [**] [**] [**]
[**] [**] [**] DC 153411 [**] [**] [**] [**]
[**] [**] [**] BC 126052 [**] [**] [**] [**]
[**] [**] [**] BC 132017 [**] [**] [**] [**]
[**] [**] [**] BC 126037 [**] [**] [**] [**]
[**] [**] [**] BC 152207 [**] [**] [**] [**]
[**] [**] [**] BC 126995 [**] [**] [**] [**]
[**] [**] [**] BC 152967 [**] [**] [**] [**]
[**] [**] [**] BC 152868 [**] [**] [**] [**]
[**] [**] [**] BC 143719 [**] [**] [**] [**]
[**] [**] [**] BC 127332 [**] [**] [**] [**]
[**] [**] [**] BC 150585 [**] [**] [**] [**]
[**] [**] [**] DC 124750 [**] [**] [**] [**]
[**] [**] [**] BC 139790 [**] [**] [**] [**]
[**] [**] [**] BC 151670 [**] [**] [**] [**]
[**] [**] [**] BC 153080 [**] [**] [**] [**]
[**] [**] [**] BC 122259 [**] [**] [**] [**]
[**] [**] [**] BC 147694 [**] [**] [**] [**]
[**] [**] [**] BC 148619 [**] [**] [**] [**]
[**] [**] [**] BC 137950 [**] [**] [**] [**]
[**] [**] [**] BC 153700 [**] [**] [**] [**]
[**] [**] [**] BC 130286 [**] [**] [**] [**]
[**] [**] [**] BC 143297 [**] [**] [**] [**]
[**] [**] [**] BC 153239 [**] [**] [**] [**]
[**] [**] [**] BC 152751 [**] [**] [**] [**]
[**] [**] [**] DC 144808 [**] [**] [**] [**]
[**] [**] [**] EC 143529 [**] [**] [**] [**]
[**] [**] [**] BC 153601 [**] [**] [**] [**]
[**] [**] [**] BC 153767 [**] [**] [**] [**]
[**] [**] [**] IC 135962 [**] [**] [**] [**]
[**] [**] [**] BC 151951 [**] [**] [**] [**]
[**] [**] [**] EC 135954 [**] [**] [**] [**]
[**] [**] [**] BC 144345 [**] [**] [**] [**]
[**] [**] [**] BC 141747 [**] [**] [**] [**]
[**] [**] [**] BC 126078 [**] [**] [**] [**]
[**] [**] [**] EC 137315 [**] [**] [**] [**]
[**] [**] [**] BC 126128 [**] [**] [**] [**]
[**] [**] [**] BC 150441 [**] [**] [**] [**]
[**] [**] [**] BC 152926 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-10
EX 1-12
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 153619 [**] [**] [**] [**]
[**] [**] [**] IC 132316-01 [**] [**] [**] [**]
[**] [**] [**] IC 132316-02 [**] [**] [**] [**]
[**] [**] [**] BC 153353 [**] [**] [**] [**]
[**] [**] [**] BC 150607 [**] [**] [**] [**]
[**] [**] [**] BC 131268 [**] [**] [**] [**]
[**] [**] [**] BC 153254 [**] [**] [**] [**]
[**] [**] [**] BC 154765 [**] [**] [**] [**]
[**] [**] [**] BC 152587 [**] [**] [**] [**]
[**] [**] [**] BC 152280 [**] [**] [**] [**]
[**] [**] [**] BC 153718 [**] [**] [**] [**]
[**] [**] [**] EC 148221 [**] [**] [**] [**]
[**] [**] [**] BC 141291 [**] [**] [**] [**]
[**] [**] [**] BC 123885 [**] [**] [**] [**]
[**] [**] [**] BC 147684 [**] [**] [**] [**]
[**] [**] [**] BC 123042 [**] [**] [**] [**]
[**] [**] [**] BC 152884 [**] [**] [**] [**]
[**] [**] [**] BC 130351 [**] [**] [**] [**]
[**] [**] [**] EC 123612 [**] [**] [**] [**]
[**] [**] [**] BC 153940 [**] [**] [**] [**]
[**] [**] [**] BC 153692 [**] [**] [**] [**]
[**] [**] [**] BC 123059 [**] [**] [**] [**]
[**] [**] [**] BC 153098 [**] [**] [**] [**]
[**] [**] [**] BC 123034 [**] [**] [**] [**]
[**] [**] [**] BC 148601 [**] [**] [**] [**]
[**] [**] [**] BC 149070 [**] [**] [**] [**]
[**] [**] [**] BC 152231 [**] [**] [**] [**]
[**] [**] [**] EC 127187 [**] [**] [**] [**]
[**] [**] [**] DC 124214 [**] [**] [**] [**]
[**] [**] [**] BC 140063 [**] [**] [**] [**]
[**] [**] [**] BC 131706 [**] [**] [**] [**]
[**] [**] [**] BC 140624 [**] [**] [**] [**]
[**] [**] [**] BC 150573 [**] [**] [**] [**]
[**] [**] [**] BC 140079 [**] [**] [**] [**]
[**] [**] [**] EC 129478-02 [**] [**] [**] [**]
[**] [**] [**] EC 129478 [**] [**] [**] [**]
[**] [**] [**] BC 121822 [**] [**] [**] [**]
[**] [**] [**] BC 150938 [**] [**] [**] [**]
[**] [**] [**] BC 154831 [**] [**] [**] [**]
[**] [**] [**] BC 148536 [**] [**] [**] [**]
[**] [**] [**] BC 148312 [**] [**] [**] [**]
[**] [**] [**] BC 134791 [**] [**] [**] [**]
[**] [**] [**] BC 142687 [**] [**] [**] [**]
[**] [**] [**] BC 140061 [**] [**] [**] [**]
[**] [**] [**] BC 150342 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-11
EX 1-13
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 150979 [**] [**] [**] [**]
[**] [**] [**] BC 140087 [**] [**] [**] [**]
[**] [**] [**] BC 149252 [**] [**] [**] [**]
[**] [**] [**] BC 141416 [**] [**] [**] [**]
[**] [**] [**] BC 148577 [**] [**] [**] [**]
[**] [**] [**] BC 145128 [**] [**] [**] [**]
[**] [**] [**] BC 126466 [**] [**] [**] [**]
[**] [**] [**] BC 153270 [**] [**] [**] [**]
[**] [**] [**] BC 139287 [**] [**] [**] [**]
[**] [**] [**] IC 147785 [**] [**] [**] [**]
[**] [**] [**] IC 144931 [**] [**] [**] [**]
[**] [**] [**] BC 148932 [**] [**] [**] [**]
[**] [**] [**] BC 123000 [**] [**] [**] [**]
[**] [**] [**] BC 126714 [**] [**] [**] [**]
[**] [**] [**] BC 121681 [**] [**] [**] [**]
[**] [**] [**] BC 123836 [**] [**] [**] [**]
[**] [**] [**] IC 123844 [**] [**] [**] [**]
[**] [**] [**] BC 125914 [**] [**] [**] [**]
[**] [**] [**] EC 147868 [**] [**] [**] [**]
[**] [**] [**] DC 140947 [**] [**] [**] [**]
[**] [**] [**] BC 136812 [**] [**] [**] [**]
[**] [**] [**] EC 136408 [**] [**] [**] [**]
[**] [**] [**] IC 147108 [**] [**] [**] [**]
[**] [**] [**] EC 137422 [**] [**] [**] [**]
[**] [**] [**] BC 139188 [**] [**] [**] [**]
[**] [**] [**] BC 144311 [**] [**] [**] [**]
[**] [**] [**] DC 127076 [**] [**] [**] [**]
[**] [**] [**] BC 153884 [**] [**] [**] [**]
[**] [**] [**] BC 152835 [**] [**] [**] [**]
[**] [**] [**] BC 127555 [**] [**] [**] [**]
[**] [**] [**] BC 153049 [**] [**] [**] [**]
[**] [**] [**] BC 125906 [**] [**] [**] [**]
[**] [**] [**] BC 138588 [**] [**] [**] [**]
[**] [**] [**] BC 152215 [**] [**] [**] [**]
[**] [**] [**] BC 149369 [**] [**] [**] [**]
[**] [**] [**] BC 127217 [**] [**] [**] [**]
[**] [**] [**] BC 152827 [**] [**] [**] [**]
[**] [**] [**] BC 149179 [**] [**] [**] [**]
[**] [**] [**] BC 138271 [**] [**] [**] [**]
[**] [**] [**] BC 144964 [**] [**] [**] [**]
[**] [**] [**] BC 139949 [**] [**] [**] [**]
[**] [**] [**] BC 132233 [**] [**] [**] [**]
[**] [**] [**] BC 153494 [**] [**] [**] [**]
[**] [**] [**] W 154815 [**] [**] [**] [**]
[**] [**] [**] BC 123794 [**] [**] [**] [**]
[**] [**] [**] BC 149302 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-12
EX 1-13
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 152090 [**] [**] [**] [**]
[**] [**] [**] BC 135483 [**] [**] [**] [**]
[**] [**] [**] BC 130773-02 [**] [**] [**] [**]
[**] [**] [**] BC 130773-01 [**] [**] [**] [**]
[**] [**] [**] BC 152744 [**] [**] [**] [**]
[**] [**] [**] BC 145219 [**] [**] [**] [**]
[**] [**] [**] BC 151886 [**] [**] [**] [**]
[**] [**] [**] BC 146870 [**] [**] [**] [**]
[**] [**] [**] BC 143735 [**] [**] [**] [**]
[**] [**] [**] BC 130773-03 [**] [**] [**] [**]
[**] [**] [**] DC 153825 [**] [**] [**] [**]
[**] [**] [**] BC 116988 [**] [**] [**] [**]
[**] [**] [**] EC 115808-01 [**] [**] [**] [**]
[**] [**] [**] IC 154187 [**] [**] [**] [**]
[**] [**] [**] BC 153973 [**] [**] [**] [**]
[**] [**] [**] BC 154120 [**] [**] [**] [**]
[**] [**] [**] BC 118000 [**] [**] [**] [**]
[**] [**] [**] BC 135624 [**] [**] [**] [**]
[**] [**] [**] BC 129148 [**] [**] [**] [**]
[**] [**] [**] BC 151688 [**] [**] [**] [**]
[**] [**] [**] EC 147090 [**] [**] [**] [**]
[**] [**] [**] EC 153981 [**] [**] [**] [**]
[**] [**] [**] IC 154435 [**] [**] [**] [**]
[**] [**] [**] BC 138792 [**] [**] [**] [**]
[**] [**] [**] BC 138303 [**] [**] [**] [**]
[**] [**] [**] BC 108670 [**] [**] [**] [**]
[**] [**] [**] EC 116883 [**] [**] [**] [**]
[**] [**] [**] BC 111021 [**] [**] [**] [**]
[**] [**] [**] BC 153171 [**] [**] [**] [**]
[**] [**] [**] BC 110288 [**] [**] [**] [**]
[**] [**] [**] BC 111781 [**] [**] [**] [**]
[**] [**] [**] BC 116517 [**] [**] [**] [**]
[**] [**] [**] BC 109619 [**] [**] [**] [**]
[**] [**] [**] BC 114546 [**] [**] [**] [**]
[**] [**] [**] BC 152645 [**] [**] [**] [**]
[**] [**] [**] BC 151266 [**] [**] [**] [**]
[**] [**] [**] BC 107607 [**] [**] [**] [**]
[**] [**] [**] EC 110775 [**] [**] [**] [**]
[**] [**] [**] BC 152645 [**] [**] [**] [**]
[**] [**] [**] DC 154229 [**] [**] [**] [**]
[**] [**] [**] DC 154211 [**] [**] [**] [**]
[**] [**] [**] BC 153163 [**] [**] [**] [**]
[**] [**] [**] DC 112797 [**] [**] [**] [**]
[**] [**] [**] BC 153924 [**] [**] [**] [**]
[**] [**] [**] BC 154005 [**] [**] [**] [**]
[**] [**] [**] BC 153064 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-13
EX 1-15
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] BC 135772 [**] [**] [**] [**]
[**] [**] [**] DC 153841 [**] [**] [**] [**]
[**] [**] [**] IC 113597 [**] [**] [**] [**]
[**] [**] [**] BC 139030 [**] [**] [**] [**]
[**] [**] [**] BC 152777 [**] [**] [**] [**]
[**] [**] [**] BC 115834 [**] [**] [**] [**]
[**] [**] [**] EC 142448 [**] [**] [**] [**]
[**] [**] [**] BC 107664 [**] [**] [**] [**]
[**] [**] [**] BC 152082 [**] [**] [**] [**]
[**] [**] [**] BC 145086 [**] [**] [**] [**]
[**] [**] [**] BC 152785 [**] [**] [**] [**]
[**] [**] [**] BC 148189 [**] [**] [**] [**]
[**] [**] [**] BC 141044 [**] [**] [**] [**]
[**] [**] [**] BC 145060 [**] [**] [**] [**]
[**] [**] [**] BC 106092 [**] [**] [**] [**]
[**] [**] [**] BC 114637 [**] [**] [**] [**]
[**] [**] [**] BC 134924 [**] [**] [**] [**]
[**] [**] [**] BC 153338 [**] [**] [**] [**]
[**] [**] [**] BC 137884 [**] [**] [**] [**]
[**] [**] [**] BC 111831 [**] [**] [**] [**]
[**] [**] [**] BC 132142 [**] [**] [**] [**]
[**] [**] [**] BC 142729 [**] [**] [**] [**]
[**] [**] [**] BC 138655 [**] [**] [**] [**]
[**] [**] [**] BC 144758 [**] [**] [**] [**]
[**] [**] [**] BC 147389 [**] [**] [**] [**]
[**] [**] [**] BC 140988 [**] [**] [**] [**]
[**] [**] [**] BC 154310 [**] [**] [**] [**]
[**] [**] [**] BC 139766 [**] [**] [**] [**]
[**] [**] [**] BC 112409 [**] [**] [**] [**]
[**] [**] [**] BC 114603 [**] [**] [**] [**]
[**] [**] [**] BC 117671 [**] [**] [**] [**]
[**] [**] [**] BC 117259 [**] [**] [**] [**]
[**] [**] [**] BC 107524 [**] [**] [**] [**]
[**] [**] [**] IC 135632 [**] [**] [**] [**]
[**] [**] [**] DC 151464 [**] [**] [**] [**]
[**] [**] [**] IC 109389 [**] [**] [**] [**]
[**] [**] [**] EC 142703 [**] [**] [**] [**]
[**] [**] [**] EC 130252 [**] [**] [**] [**]
[**] [**] [**] EC 112102 [**] [**] [**] [**]
[**] [**] [**] BC 108290 [**] [**] [**] [**]
[**] [**] [**] BC 143669 [**] [**] [**] [**]
[**] [**] [**] BC 113126 [**] [**] [**] [**]
[**] [**] [**] BC 138305 [**] [**] [**] [**]
[**] [**] [**] BC 148589 [**] [**] [**] [**]
[**] [**] [**] BC 151878 [**] [**] [**] [**]
[**] [**] [**] BC 154880 [**] [**] [**] [**]
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-14
EX 1-16
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
US SERVICE REVENUE
System Maintenance Agreements
Zip Code Region System Code Site ID Account Contract Hardware Software
[**] [**] [**] DC 154203 [**] [**] [**] [**]
[**] [**] [**] DC 154401 [**] [**] [**] [**]
[**] [**] [**] DC 154393 [**] [**] [**] [**]
[**] [**] [**] BC 151282 [**] [**] [**] [**]
[**] [**] [**] DC 154195 [**] [**] [**] [**]
[**] [**] [**] DC 151522 [**] [**] [**] [**]
[**] [**] [**] BC 146522 [**] [**] [**] [**]
[**] [**] [**] EC 145250 [**] [**] [**] [**]
[**] [**] [**] IC 148734 [**] [**] [**] [**]
[**] [**] [**] IC 148720 [**] [**] [**] [**]
[**] [**] [**] BC 153262 [**] [**] [**] [**]
[**] [**] [**] IC 153668 [**] [**] [**] [**]
[**] [**] [**] IC 154948 [**] [**] [**] [**]
3,663,452 2,929,071 734,380
KSUMRPT9.02 Remanco International, Inc. Company Confidential 9/21/95
16-15
EX 1-17
<PAGE>
**CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
<TABLE>
<CAPTION>
EXHIBIT B
REMANCO EMPLOYEES
- -----------------------------------------------------------------------------------------------------------------
SPECIAL REMANCO REMANCO MAI MAI TECH ADDRESS CITY STATE ZIP REMANCO MAI REMANCO MAI MAI
VACATION EMP. DATE EMP. DATE NAME REGION DISTRICT BI-WEEKL BI-WEEK ANNUAL
NO. OF OF MANAGER SALARY SALARY SALARY
HIRE HIRE
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
<S> <C> <C> <C> <C> <C> <C> <C> <C> <C> <C> <C> <C> <C>
202762 06/25/84 26770 10/01/96[**] [**] Thornton CO 80229 Denver, Sally [**] [**] [**]
CO Brown
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
208847 03/21/88 26771 10/01/96[**] [**] Glendale AZ 86308 Phoenix, Sally [**] [**] [**]
AZ Brown
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
10 209437 05/13/91 26772 10/01/96[**] [**] Tampa FL 33604 Tampa, FL Bob [**] [**] [**]
HRS/MO Johnston
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
211219 02/27/95 26774 10/01/96[**] [**] Houston TX 77084 Houston, Bob [**] [**] [**]
TX Johnston
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
210889 02/28/94 26789 10/01/96[**] [**] San CA 94080 Boston, Sally [**] [**] [**]
Francisco MA Brown
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
210740 03/17/93 26780 10/01/96[**] [**] Peabody MA 01980 Boston, Sally [**] [**] [**]
MA Brown
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
208254 09/02/95 26775 10/01/96[**] [**] CasselberFL 32707 Orlando, Bob [**] [**] [**]
FL Johnston
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
210716 02/08/93 26776 10/01/96[**] [**] AlphagretGA 30202 Atlanta, Bob [**] [**] [**]
GA Johnston
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
203463 11/22/84 26777 10/01/96[**] [**] Chicago IL 60625 Chicago, Bob [**] [**] [**]
IL Regimand
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
208991 10/01/90 26778 10/01/96[**] [**] Irving TX 75080 Dallas, Bob [**] [**] [**]
TX Johnston
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
205361 10/19/97 26779 10/01/96[**] [**] Waldorf MD 20601 WashingtonBuddy [**] [**] [**]
DC Gardner
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
203737 11/05/84 28781 10/01/96[**] [**] OceansideCA 92054 San Sally [**] [**] [**]
Diego, CA Brown
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
207316 09/26/89 36782 10/01/96[**] [**] PhiladelpPAa 19111 PhiladelphBuddy [**] [**] [**]
PA Gardner
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
204040 10/31/84 26783 10/01/96[**] [**] HazelcreeIL 60429 Chicago, Bob [**] [**] [**]
IL Reginald
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
211276 06/12/95 26773 10/01/96[**] [**] Coral FL 33071 Miami, FL Bob [**] [**] [**]
Springs Johnston
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
210955 01/24/94 26784 10/01/96[**] [**] HuntingtoCA 92649 LAX Sally [**] [**] [**]
Beach Brown
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
208827 07/10/90 26785 10/01/96[**] [**] Encino CA 91436 LAX Sally [**] [**] [**]
Brown
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
208397 03/12/90 26786 10/01/96[**] [**] Aston PA 19014 PhiladelphBuddy [**] [**] [**]
PA Gardner
- -----------------------------------------------------------------------------------------------------------------
- -----------------------------------------------------------------------------------------------------------------
10HRS/MO210294 06/04/92 26787 10/01/96[**] [**] ClevelandOH 44111 Cleveland,Buddy [**] [**] [**]
OH Gardner
- -----------------------------------------------------------------------------------------------------------------
</TABLE>
* Different offer letter (vacation paragraph) ** Totally different offer letter
^^ Temporary Address:
Best Western Governor Hotel
380 So. Airport Blvd.
So. San Francisco, CA 94080
Room 919
10/12/96
1:20 PM
17
EX 1-18
<PAGE>
EXHIBIT C
REMANCO PRODUCTS
EQUIPMENT
Equipment means the equipment listed in the Advantage Services Price List on
pages 18-1 through 18-32 and on pages 18-33 through 18-66, attached hereto.
SOFTWARE
Software means the software listed in Licensor Software Programs, pages 18-67
through 18-73 attached hereto and Vision/Advantage Software, pages 18-74 through
18-77 attached hereto.
18
EX 1-19
<PAGE>
EXHIBIT C
Remanco Products
Equipment
Remanco International, Inc.
ADVANTAGE SERIES Price List
Americas Direct Region
10/11/95
"This material contains confidential information proprietary to Remanco
International, Inc. and may not be copied, published or disclosed without
authorization."
18-1
EX 1-20
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE 600 SERIES PROCESSORS
820F VISION ADVANTAGE 820 RISC PROCESSOR
MOTOROLA 25MHZ, 16MG RISC MICROPROCESSOR, 150MG TAPE DRIVE,
220MB HARD DRIVE
830F VISION ADVANTAGE 830 RISC PROCESSOR
MOTOROLA 25MHZ, 16MG RISC MICROPROCESSOR, 150MG TAPE DRIVE,
525 MB HARD DRIVE
REQUIRED VISION ADVANTAGE 800 SERIES ACCESSORIES
800F VISION ADVANTAGE 800 REQUIRED ACCESSORIES
POWER CORD
PCV TO FIRST LAN BLOCK CABLE
PROCESSOR TO PCV CABLE
LAN BLOCK KIT
UNIX PCV MODEL 523 AND POWER SUPPLY
9600 BAND MULTI-TECH SYSTEM MODEM
EPSON LQ570 80 COLUMN DOT MATRIX PRINTER AND 1 REAM OF PAPER
SERIAL TO PARALLEL PRINTER CONVERTER
SYSTEM UPS TRIPPLITE BC 500LAN
WYSE 60 MONOCHROME WORKSTATION
PRINTER CABLE
CRT CABLE
MODEM CABLE
ID KEYS AND CASE
SECURITY TAPE AND KEY
2852A 4 WIRE PLENUM NETWORK CABLE (PER FOOT)
2853A 4 WIRE PVC NETWORK CABLE (PER FOOT)
REQUIRED ADVANTAGE RUNTIME LICENSE
100E ADVANTAGE RUNTIME LICENSE PER TERMINAL UP TO SECURITY LEVEL SET
VISION ADVANTAGE 800 SOFTWARE LICENSES & DOCUMENTATION
SEE BELOW VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
QUICKBAK RUNTIME LICENSE
UNIFY & ACCEL w/SQL LANGUAGE RUNTIME LICENSE
SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM GUIDE
REPORTING GUIDE
TRAINING MANUAL
MANAGER TRAINING GUIDE
FQH TRAINING GUIDE
SERVER TERMINAL GUIDE
CONDENSED REFERENCE MANUAL
MANAGER PREFERENCE MANUAL
MANAGER REFERENCE GUIDES (10)
SERVER REFERENCE GUIDES (50)
800F16 VISION ADVANTAGE 800 SOFTWARE LICENSES & DOCUMENTATION
(1-5 TERMINALS)
800F87 VISION ADVANTAGE 800 SOFTWARE LICENSES & DOCUMENTATION
(6-7 TERMINALS)
800F88 VISION ADVANTAGE 800 SOFTWARE LICENSES & DOCUMENTATION
(8-9 TERMINALS)
800F1011 VISION ADVANTAGE 800 SOFTWARE LICENSES & DOCUMENTATION
(10-11 TERMINALS)
800F1200 VISION ADVANTAGE 800 SOFTWARE LICENSES & DOCUMENTATION
(12 OR MORE TERMINALS)
REMANCO INTERNATIONAL, INC. COMPANY CONFIDENTIAL
PAGE 1
18-2
EX 1-21
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE 800 SERIES PROCESSORS OPTIONS
6713E ADD ON EPSON LQ 570 COLUMN PRINTER AND SERIAL TO PARALLEL CONVERTER
6715E ADD ON OKIDATA OL810 LASER PRINTER, SERIAL TO PARALLEL CONVERTER AND
1 CASE OF PAPER
*LASER PRINTERS CANNOT BE POWERED BY THE STANDARD UPS
6714E SERVER STATION UPS MODEL BC 250
6716E UPS FOR LASER PRINTER MODEL NPP-1400
6700E ADD ON WYSE 60 MONOCHROME WORKSTATION AND CABLE
WYSE 60 MONOCHROME CRT AND CABLE
6701E ADD ON WYSE 60 COLOR WORKSTATION AND CABLE
WYSE 60 COLOR CRT AND CABLE
6700E 14" COLOR X-TERMINAL KIT
DELTA WINDOWS (MOTOROLA)
14" MOTOROLA COLOR MONITOR
CONSOLE FIRMWARE (MOTOROLA)
POWER CORD
PS2 US KEYBOARD
REQUIRED TCPAP KIT
6771E 15" BLACK & WHITE X-TERMINAL KIT
DELTA WINDOWS (MOTOROLA)
15" MOTOROLA BLACK & WHITE MONITOR
POWER CORD
PS2 US KEYBOARD
REQUIRED TCPAP KIT
6780E REMOTE WYSE 60 MONOCHROME WORKSTATION AND CABLE
WYSE 60 MONOCHROME CRT AND CABLE
TWO (2) SHORT HAUL MODEMS 19.2KB
6761E REMOTE WYSE 60 COLOR WORKSTATION AND CABLE
WYSE 60 COLOR CRT AND CABLE
TWO (2) SHORT HAUL MODEMS 19.2KB
2350E ADDITIONAL NETWORK KIT
523 PROTOCOL CONVERTER, LAN BLOCK KIT, 12V POWER SUPPLY
ADDITIONAL ADVANTAGE NETWORK SOFTWARE
2300E REMOTE NETWORK KIT
523 PROTOCOL CONVERTER, LAN BLOCK KIT, 12 V POWER SUPPLY
ADDITIONAL ADVANTAGE NETWORK SOFTWARE
TWO (2) SHORT HAUL MODELS 19.2KB
8780E REMOTE 80 COLUMN PRINTER KIT
80 COLUMN PRINTER AND SERIAL TO PARALLEL CONVERTER
TWO (2) SHORT HAUL MODEMS 19.2KB
2820E VISION ADVANTAGE 8 PROT SERIAL EXTENSION KIT
88K LPSS (MOTOROLA)
88K LPSS OVERLAY (RII)
TERMINAL SERVER KIT (MOTOROLA)
POWER CORD
TRANSFER BOX
* REQUIRES TCPMP KIT
2632E PMSI HOTEL INTERFACE PACKAGE
PMSI SOFTWARE, HOTEL LINK 520 PCV AND POWER SUPPLY, NIGHT
AUDIT GUIDE
2633E HMS HOTEL INTERFACE PACKAGE
HMS SOFTWARE, HOTEL LINK 520 PCV AND POWER SUPPLY, NIGHT
AUDIT GUIDE
2837E ADDITIONAL 525MB MOTOROLA EXTERNAL HARD DRIVE WITH CASE
6717E 2400 BAUD HAYES EXTERNAL MODEM AND CABLE
6711E 9400 BAUD MULTI-TECH EXTERNAL MODEM AND CABLE
6720E SYSTEM UPS TRIPPLITE BC 500 LAN
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 2
18-3
EX 1-22
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE ESP OPTIONS
* THIS PRICE AVAILABLE ONLY IF PURCHASED WITH THE SYSTEM
9900E ESP II CONTROL GROUP
RADIO BASE STATION, ANTENNA, PLAN PCV AND POWER CORD
BATTERY CHARTER AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
TELCO CABLE (PCV TO LAN BLOCK)
ESP REFERENCE GUIDES (50)
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 3
18-4
EX 1-23
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE TERMINALS
9007E ALPHA ENTRY TERMINAL (RII)
TERMINAL STAND AND 10 KEY READER
9009E TOUCH SCREEN TERMINAL (RII)
TERMINAL STAND AND 10 KEY READER
8005E ESP II TERMINAL (RII)
2 ESP BATTERIES
100E TERMINAL SECURITY LEVEL ADD ON
VISION ADVANTAGE TERMINAL OPTIONS
6101E MAGNETIC STRIPE READER
8201AE SINGLE SIDED SATELLITE
6300E CASH DRAWER & TILL
6301E ADDITIONAL CASH DRAWER INSERT
VISION ADVANTAGE BAR CODE SCANNER OPTIONS
7500E LASER SCANNER BOH WYSE 60 KEYBOARD
7501E LASER SCANNER FOH TERMINAL
7502E CCD SCANNER BOH WYSE 60 KEYBOARD
7503E CCD SCANNER FOH TERMINAL
7504E WAND READER BOH WYSE 60 KEYBOARD
7505E WAND READER FOH TERMINAL
7506E ADDITIONAL WYSE 60 KEYBOARD CABLE FOR LASER OR CCD SCANNER
7507E ADDITIONAL FOH TERMINAL CABLE FOR LASER OR CCD SCANNER
VISION ADVANTAGE PRINTERS
6501E SLIP CHECK PRINTER (EPSON 290)
6514E THERMAL CHECK PRINTER (CITIZEN CBM-210)
6520E THERMAL AUTOCUT CHECK PRINTER (CITIZEN CBM-220)
6506E THERMAL CHECK PRINTER & EXTERNAL POWER SUPPLY (EPSON TM-T80)
6507E THERMAL AUTOCUT PRINTER & EXTERNAL POWER SUPPLY (EPSON TM-T80A)
6517E IMPACT CHECK PRINTER (EPSON 3000)
6504E IMPACT AUTOCUT PRINTER (EPSON 3006)
VISION ADVANTAGE REMOTE PRINTERS
* ALL REMOTE PRINTERS INCLUDE PCV, POWER SUPPLY, AND CABLE
6518E REMOTE THERMAL CHECK PRINTER (CITIZEN CBM-210)
6521E REMOTE THERMAL AUTOCUT CHECK PRINTER (CITIZEN CBM-220)
6508E REMOTE THERMAL CHECK PRINTER (EPSON TM-T80)
6509E REMOTE THERMAL AUTOCUT PRINTER (EPSON TM-T80A)
6515E REMOTE IMPACT CHECK PRINTER (EPSON 3000)
6500E REMOTE IMPACT AUTOCUT CHECK PRINTER (EPSON 3008)
6522E REMOTE DESKJET PRINTER (*CONVERTER MAY BE REQUIRED)
6823E REMOTE PRINTER ADAPTER KIT
5842E *SERIAL TO PARALLEL CONVERTER AND DB9 TO DB25 CONNECTOR
VISION ADVANTAGE ESP OPTIONS
9912E ESP II CONTROL GROUP
RADIO BASE STATION, ANTENNA, PLAN PCV AND POWER CORD
BATTERY CHARGER AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
TELCO CABLE (PCV TO LAN BLOCK)
ESP REFERENCE GUIDES (50)
2912E RBS II CONTROL GROUP
RADIO BASE STATION, ANTENNA, PLAN PCV AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
2902E ESP II BATTERY CHARTER (12 SLOTS)
BATTERY CHARTER AND POWER CORD
REMANCO INTERNATIONAL, INC. o COMPANY
CONFIDENTIAL
PAGE 4
18-5
EX 1-24
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE 800 SOFTWARE OPTIONS
2100E VISION ADVANTAGE RUNTIME RE-LICENSE
2634E TIME AND ATTENDANCE RUNTIME LICENSE
2701E BEVERAGE DISPENSER INTERFACE
2650E ENTERTAINMENT RENTALS
2860E DUAL DISK MIRROR INTERFACE KIT
UNIX DEVELOPMENT KIT
220MB EXTERNAL HARD DRIVE
* DUAL DISK SOFTWARE MUST BE PURCHASED FROM TWINCOM
6523E PERIOD TO DATE ARCHIVE OPTION
PERIOD TO DATE ARCHIVE SOFTWARE
525MB EXTERNAL HARD DRIVE
6750E MULTI-AUTH CREDIT AUTHORIZATION KIT (VISION ADVANTAGE)
2400 BAUD EXTERNAL MODEM AND CABLE
MULTI-AUTH SOFTWARE
MULTI-AUTH MANUAL AND REFERENCE GUIDES
*MULTI-AUTH REQUIRES THE USE OF A SERIAL PORT ON THE PROCESSOR
6718E MULTI-AUTH PROCESSOR OR MERCHANT NUMBER CHANGE
MERCHANT FILE TAPE
2817E NSE RUNTIME LICENSE
NSE SOFTWARE (MOTOROLA)
2818E UNIX DEVELOPMENT KIT (FOR KERNEL MODIFICATION)
UNIX DEVELOPMENT SOFTWARE (RII)
2819 TCP/IP KIT (FOR THINNET ETHERNET NETWORKS)
UNIX DEVELOPMENT KIT
NSE RUNTIME LICENSE (MOTOROLA)
THINNET KIT (MOTOROLA)
4016E ADD ON OPTION SECURITY TAPE (800 SERIES, 3.0)
4215E ADD ON OPTION SECURITY TAPE (800 SERIES, 5.0)
SOFT PC * SOFT PC MUST BE PURCHASED FROM MOTOROLA
* REQUIRES TCP4P KIT
* REQUIRES X-TERMINAL KIT
SOFTWARE LICENSE FOR ADD ON TERMINALS EXCEEDING ORIGINAL SOFTWARE LEVEL
3743E DIFFERENCE BETWEEN ORIGINAL PURCHASED SW LEVEL AND NEW SW LEVEL
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 5
18-6
EX 1-25
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE COMMUNICATION OPTIONS
2685E ADVANTAGE COMMUNICATION FILES RUNTIME LICENSE
LABOR, FOOD & BEVERAGE, ACCOUNTING, RMS & PTD ASC II FILES
2647E COMMUNICATION MANAGER (M-LINK)
COMMUNICATION MANAGER AND MANUAL
2649E MS-DOS COMMUNICATION MANAGER FOR PC (M-LINK)
COMMUNICATION MANAGER AND MANUAL
2642E POLLING KIT 1-9 w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
2643E POLLING KIT 10-49 w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
2644E POLLING KIT 50-99 w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
2645E POLLING KIT 100+ w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 6
18-7
EX 1-26
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
ADVANTAGE SPARES (WITH ANNUAL MAINTENANCE AGREEMENT)
9007ES SPARE ALPHA ENTRY TERMINAL (RII)
9009ES SPARE TOUCH SCREEN TERMINAL (RII)
8524ES SPARE THERMAL PRINTER (CITIZEN CBM-210)
8525ES SPARE THERMAL AUTOCUT PRINTER (CITIZEN CBM-220)
8526ES SPARE THERMAL PRINTER (SPSON TM-T80)
8527ES SPARE THERMAL AUTOCUT PRINTER (EPSON TM-T80A)
8501ES SPARE SLIP CHECK PRINTER (EPSON 290)
8504ES SPARE IMPACT CHECK PRINTER (EPSON 300D)
8529ES SPARE AUTOCUT CHECK PRINTER (EPSON 300B)
ADVANTAGE IMPLEMENTATION SERVICES
6528E SYSTEM BACK OFFICE INSTALLATION PER DAY
2740E ADDITIONAL DAY FOR BACK OFFICE INSTALLATION
2753E EXTRA MODE INSTALLATION
EACH ADDITIONAL NETWORK
HOTEL INTERFACE
ESP CONTROL GROUP
ADDITIONAL RBS
REMOTE NETWORK
REMOTE WORKSTATION
REMOTE PRINTER
8 PORT SERIAL EXTENSION
2748E ON-SITE TRAINING PER DAY (INCLUDES TRAVEL AND EXPENSES)
2744E HOLIDAY/WEEKEND AND PRE - 30 DAY PREMIUM CHARGE
ADVANTAGE MANUALS AND DOCUMENTATION
2530E SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM
REPORTING GUIDE
2531E TRAINING MANUAL
MANAGER TRAINING GUIDE
FRONT OF HOUSE TRAINING GUIDE
SERVER TERMINAL GUIDE
2522E CONDENSED REFERENCE GUIDE
2508E MANAGER REFERENCE GUIDES (10)
2509E SERVER REFERENCE GUIDE (50)
2507 E ESP REFERENCE GUIDES (50)
2520E CREDIT REFERENCE GUIDES
2528E BEVERAGE DISPENSER GUIDE
2828E MULTI-AUTH CREDIT AUTHORIZATION GUIDE
2523E VISION ADVANTAGE NETWORK TECHNICAL REF GUIDE
2527E POLLING MGR / COMM MGR GUIDE
2508E VISION ADVANTAGE INSTALLATION GUIDE
2521E NIGHT AUDIT GUIDE
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 7
18-8
EX 1-27
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
68K TO VISION ADVANTAGE 800 SERIES SOFTWARE UPGRADE KITS
* THESE PACKAGES MUST BE RE-ORDERED FOR USE WITH THE 99K SYSTEM
2357E COMMUNICATION MANAGER RE-ORDER UPGRADE KIT (88K TO VISION ADVANTAGE)
COMMUNICATION MANAGER AND MANUAL
2358E POLLING MANAGER SOFTWARE RE-ORDER UPGRADE KIT (1-9) (88K TO VISION
ADVANTAGE)
POLLING MANAGER
COMMUNICATION MANAGER
6530E POLLING MANAGER SOFTWARE RE-ORDER UPGRADE KIT (10-49) (88K TO VISION
ADVANTAGE)
POLLING MANAGER
COMMUNICATION MANAGER
6718E MULTI-AUTH PROCESSOR OR MERCHANT NUMBER CHANGE
MERCHANT FILE TAPE
68K TO VERSION SERIES 800 ADVANTAGE SYSTEM MIGRATION
*PROCESSOR IS NOT INCLUDED, SEE VISION ADVANTAGE 800 SERIES
PROCESSORS
REQUIRED 68K TO VISION ADVANTAGE 800 SERIES ACCESSORIES
801F 68K TO VISION ADVANTAGE REQUIRED ACCESSORIES
POWER CORD
PROCESSOR TO PCV CABLE
SERIAL TO PARALLEL PRINTER CONVERTER
CRT CABLE
MODEM CABLE
SECURITY TAPE AND KEY
REQUIRED ADVANTAGE RUNTIME LICENSE
100E ADVANTAGE RUNTIME LICENSE PER TERMINAL UP TO SECURITY LEVEL SET
VISION ADVANTAGE 800 SOFTWARE LICENSES & DOCUMENTATION
SEE BELOW VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
QUICKBAK RUNTIME LICENSE
UNIFY & ACCEL w/SQL LANGUAGE RUNTIME LICENSE
SYSTEM V UNIX RUNTIME LICENSE
DOCUMENTATION
SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM CODE
REPORTING GUIDE
TRAINING MANUAL
MANAGER TRAINING GUIDE
SERVER TRAINING GUIDE
SERVER TERMINAL GUIDE
FOH TRAINING GUIDE
CONDENSED REFERENCE MANUAL
MANAGER REFERENCE GUIDES (10)
SERVER REFERENCE GUIDES (50)
800F15 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (1-5 TERMINALS)
800F87 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (6-7 TERMINALS) 801F80
VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (8 OR MORE TERMINALS)
REMANCO INTERNATIONAL, INC. COMPANY CONFIDENTIAL
PAGE 8
18-9
EX 1-28
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE COMMUNICATION OPTIONS
RMS TO VISION ADVANTAGE SERIES 800 MIGRATION
* PROCESSOR IS NOT INCLUDED, SEE VISION ADVANTAGE
SERIES 800 PROCESSORS
REQUIRED RMS TO VISION ADVANTAGE MIGRATION REQUIRED ACCESSORIES
802F RMS TO VISION ADVANTAGE MIGRATION REQUIRED ACCESSORIES
POWER CORD
PCV TO FIRST LAN BLOCK
PROCESSOR TO PCV CABLE
LAN BLOCK KIT
UNIX PCV MODEL 523 AND POWER SUPPLY
WYSE 60 MONOCHROME WORKSTATION
EPSON LO570 80 COLUMN DOT MATRIX PRINTER AND 1 REAM OF PAPER
SERIAL TO PARALLEL PRINTER CONVERTER 9400 BAUD MULTI-TECH EXTERNAL
MODEM AND CABLE PRINTER CABLE CRT CABLE MODEM CABLE REAM OF PAPER
SECURITY TAPE AND KEY
REQUIRED ADVANTAGE RUNTIME LICENSE
100E ADVANTAGE RUNTIME LICENSE PER TERMINAL UP TO SECURITY LEVEL SET
VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
SEE BELOW VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
QUICKBAK RUNTIME LICENSE
SYSTEM V UNIX RUNTIME LICENSE
UNIFY & ACCEL w/SQL LANGUAGE RUNTIME LICENSE
DOCUMENTATION
SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM CODE
REPORTING GUIDE
TRAINING MANUAL
MANAGER TRAINING GUIDE
SERVER TRAINING GUIDE
SERVER TERMINAL GUIDE
FOH TRAINING GUIDE
CONDENSED REFERENCE MANUAL
MANAGER REFERENCE GUIDES (10)
SERVER REFERENCE GUIDES (50)
800F15 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (1-5 TERMINALS) 800F87
VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (6-7 TERMINALS) 801F80 VISION
ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (8-9 TERMINALS) 800F1011 VISION
ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (10-11 TERMINALS) 801F1200 VISION
ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (12 OR MORE TERMINALS)
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 9
18-10
EX 1-29
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
RMS TO VISION ADVANTAGE MIGRATION ADDITIONS (RMS 1600/1700 SYSTEMS)
2835E 485 LINE CONVERTER
7000E 524 PROTOCOL CONVERTER
7001E DBOX CONVERSION KIT
7002E RS-485 CARD FRAME (0825)
7025E RS-485 CARD CAGE (DB25) (OUTSIDE ENCLOSURE)
6720E SYSTEM UPS TRIPPLITE BC 500 LAN
RMS VISION ADVANTAGE MIGRATION ADDITIONS (RMS 1800/1900/1200/1500 SYSTEMS)
2845E LINE DRIVER CARD
7003E SWITCH CARD
7022E RS-485 CARD FRAME (D89)
7023E RS-485 CARD CAGE (D89) (OUTSIDE ENCLOSURE)
7005E LAN BLOCK KIT
6800E RMS TERMINAL/PRINTER MIGRATION KIT
PCV, POWER SUPPLY, PCV CABLE LAN BLOCK KIT, PCV CABLE TO LAN
6804E RBS MIGRATION KIT
SV LINEAR PS, PLAN NETWORK PCV, SURFACE MNT LAN KIT, CABLE
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 10
18-11
EX 1-30
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE 900 SERIES PROCESSORS
904G VISION ADVANTAGE 904 RISC PROCESSOR
MOTOROLA 33 MHZ, 16 MB RISC MICROPROCESSOR, 525 MB TAPE DRIVE
520MB HARD DRIVE, 4 PORTS
912G VISION ADVANTAGE 912 RISC PROCESSOR
MOTOROLA 33MHZ, 16MB RISC MICROPROCESSOR, 525MB TAPE DRIVE,
520MB HARD DRIVE, 12 PORTS
REQUIRED VISION ADVANTAGE 900 SERIES ACCESSORIES
900G VISION ADVANTAGE 900 REQUIRED ACCESSORIES
POWER CORD
PCV TO FIRST LAN BLOCK CABLE
PROCESSOR TO PCV CABLE
LAN BLOCK KIT
UNIX PCV MODEL 523 AND POWER SUPPLY
9400 BAUD MULTI-TECH SYSTEM MODEM
EPSON LQ570 80 COLUMN DOT MATRIX PRINTER AND 1 REAM OF PAPER
SERIAL TO PARALLEL PRINTER CONVERTER
SYSTEM UPS TRIPPLITE BC 500LAN
WYSE 60 MONOCHROME WORKSTATION
PRINTER CABLE
CRT CABLE
MODEM CABLE
ID KEYS AND CASE
SECURITY TAPE AND KEY
2852A 4 WIRE PLENUM NETWORK CABLE (PER FOOT)
2853A 4 WIRE PCV NETWORK CABLE (PER FOOT)
REQUIRED ADVANTAGE RUNTIME LICENSE
100E ADVANTAGE RUNTIME LICENSE PER TERMINAL UP TO SECURITY LEVEL SET
SEE BELOW VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
QUICKBAK RUNTIME LICENSE
SYSTEM V UNIX RUNTIME LICENSE
UNIFY & ACCEL w/SQL LANGUAGE RUNTIME LICENSE
DOCUMENTATION
SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM CODE
REPORTING GUIDE
TRAINING MANUAL
MANAGER TRAINING GUIDE
SERVER TRAINING GUIDE
SERVER TERMINAL GUIDE
FOH TRAINING GUIDE
CONDENSED REFERENCE MANUAL
MANAGER REFERENCE GUIDES (10)
SERVER REFERENCE GUIDES (50)
900G15 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (1-5 TERMINALS) 900G47
VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (6-7 TERMINALS) 900G88 VISION
ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (8-9 TERMINALS) 900G1011 VISION
ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (10-11 TERMINALS) 900G1200 VISION
ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (12 OR MORE TERMINALS)
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 11
18-12
EX 1-31
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE 900 SYSTEM PROCESSOR OPTIONS
6713G ADD ON EPSON LQ 570 80 COLUMN PRINTER AND SERIAL TO PARALLEL
CONVERTER
6715G ADD ON OKIDATA OL810 LASER PRINTER, SERIAL TO PARALLEL CONVERTER
AND 1 CASE OF PAPER
*LASER PRINTERS CANNOT BE POWERED BY THE STANDARD UPS
6714E SERVER STATION UPS MODEL BC 250
6716E UPS FOR LASER PRINTER MODEL NPP-1400
6700G ADD ON WYSE 60 MONOCHROME WORKSTATION AND CABLE
WYSE 60 MONOCHROME CRT AND CABLE
6701G ADD ON WYSE 60 COLOR WORKSTATION AND CABLE
WYSE 60 COLOR CRT AND CABLE
6770G 14" COLOR X-TERMINAL KIT
DELTA WINDOWS (MOTOROLA)
14" MOTOROLA COLOR MONITOR
CONSOLE FIRMWARE (MOTOROLA)
POWER CORD
PS2 US KEYBOARD
* REQUIRES TCPAP KIT
6771G 15" BLACK & WHITE X-TERMINAL KIT
DELTA WINDOWS (MOTOROLA)
15" MOTOROLA BLACK & WHITE MONITOR
CONSOLE FIRMWARE (MOTOROLA)
POWER CORD
PS2 US KEYBOARD
* REQUIRES TCPAP KIT
6780G REMOTE WYSE 60 MONOCHROME WORKSTATION AND CABLE
WYSE 60 MONOCHROME CRT AND CABLE
TWO (2) SHORT HAUL MODEMS 19.2KB
6781G REMOTE WYSE 60 COLOR WORKSTATION AND CABLE
WYSE 60 COLOR CRT AND CABLE
TWO (2) SHORT HAUL MODEMS 19.2KB
2350G ADDITIONAL NETWORK KIT
523 PROTOCOL CONVERTER, LAN BLOCK KIT, 12V POWER SUPPLY
ADDITIONAL ADVANTAGE NETWORK SOFTWARE
2300G REMOTE NETWORK KIT
523 PROTOCOL CONVERTER, LAN BLOCK KIT, 12V POWER SUPPLY
ADDITIONAL ADVANTAGE NETWORK SOFTWARE
TWO (2) SHORT HAUL MODEMS 19.2KB
6780G REMOTE 80 COLUMN PRINTER KIT
80 COLUMN PRINTER AND SERIAL TO PARALLEL CONVERTER
TWO (2) SHORT HAUL MODEMS 19.2KB
2820G VISION ADVANTAGE 900 SERIES ADDITIONAL 8 PORT SERIAL BOARD
8 PORT SERIAL CONTROLLER
2632E PMSI HOTEL INTERFACE PACKAGE
HMS SOFTWARE, HOTEL LINK 520 PCV AND POWER SUPPLY, NIGHT
AUDIT GUIDE
2633E HMS HOTEL INTERFACE PACKAGE
HMS SOFTWARE, HOTEL LINK 520 PCV AND POWER SUPPLY, NIGHT
AUDIT GUIDE
2837G ADDITIONAL 330MB MOTOROLA EXTERNAL HARD DRIVE WITH CASE
6717G 2400 BAUD HAYES EXTERNAL MODEM AND CABLE
6711G 9600 BAUD MULTI-TECH EXTERNAL MODEM AND CABLE
6720E SYSTEM UPS TRIPPLITE BC 500 LAN
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 13
18-13
EX 1-32
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE ESP OPTIONS PURCHASED WITH SYSTEM ONLY PRICE
*THIS PRICE AVAILABLE ONLY IF PURCHASED WITH THE SYSTEM
9900R ESP II CONTROL GROUP
RADIO BASE STATION, ANTENNA, PLAN PCV AND POWER CORD
BATTERY CHARGER AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
TELCO CABLE (PCV TO LAN BLOCK)
ESP REFERENCE GUIDES (50)
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 13
18-14
EX 1-33
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE TERMINALS
9007E ALPHA ENTRY TERMINAL (RII)
TERMINAL STAND AND ID KEY READER
9009E TOUCH SCREEN TERMINAL (RII)
TERMINAL STAND AND ID KEY READER
8006E ESP II TERMINAL (RII)
100E PER TERMINAL SECURITY LEVEL ADD ON
VISION ADVANTAGE TERMINAL OPTIONS
6101E MAGNETIC STRIPE READER
6201E SINGLE SIDED SATELLITE
6300E CASH DRAWER & TILL
6130E TERMINAL SUNSCREEN
6301E ADDITIONAL CASH DRAWER INSERT
VISION ADVANTAGE BAR CODE SCANNER OPTIONS
7500E LASER SCANNER POH WYSE 60 KEYBOARD
7501E LASER SCANNER FOH TERMINAL
7502E CCD SCANNER BOH WYSE 60 KEYBOARD
7503E CCD SCANNER POH TERMINAL
7504E WAND READER BOH WYSE 60 KEYBOARD
7505E WAND READER FOH TERMINAL
7506E ADDITIONAL WYSE 60 KEYBOARD CABLE FOR LASER OR CCD SCANNER
7507E ADDITIONAL FOH TERMINAL CABLE FOR LASER OR CCD SCANNER
VISION ADVANTAGE PRINTERS
6501E SLIP CHECK PRINTER (EPSON 290)
6514E THERMAL CHECK PRINTER (CITIZEN CBM-210)
6520E THERMAL AUTOCUT CHECK PRINTER (CITIZEN CBM-220)
6508E THERMAL CHECK PRINTER & EXTERNAL POWER SUPPLY (EPSON TM-T80)
6507E THERMAL AUTOCUT PRINTER & EXTERNAL POWER SUPPLY (EPSON TM-T80A)
6517E IMPACT CHECK PRINTER (EPSON 300D)
6504E IMPACT AUTOCUT PRINTER (EPSON 300B)
VISION ADVANTAGE REMOTE PRINTERS
*ALL REMOTE PRINTERS INCLUDE PCV, POWER SUPPLY, AND CABLE)
6818E REMOTE THERMAL CHECK PRINTER (CBM-210)
6521E REMOTE THERMAL AUTOCUT CHECK PRINTER (CITIZEN CBM-220)
6508E REMOTE THERMAL CHECK PRINTER (EPSON TM-T80)
6509E REMOTE THERMAL AUTOCUT PRINTER (EPSON TM-T80A)
6515E REMOTE IMPACT CHECK PRINTER (EPSON 300D)
6500E REMOTE IMPACT AUTOCUT CHECK PRINTER (EPSON 300B)
6522E REMOTE DESKJET PRINTER (*CONVERTER MAY BE REQUIRED)
6823E REMOTE PRINTER ADAPTER KIT
5842E *SERIAL TO PARALLEL CONVERTER AND DB9 TO DB25 CONNECTOR
VISION ADVANTAGE 900 ESP OPTIONS
9812E ESP II CONTROL GROUP
RADIO BASE STATION, ANTENNA, PLAN PCV AND POWER CORD
BATTERY CHARTER AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
TELCO CABLE (PCV TO LAN BLOCK)
ESP REFERENCE GUIDES (50)
2912E RBS II CONTROL GROUP
RADIO BASE STATION, ANTENNA, PLAN PCV AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
2902E ESP II BATTERY CHARTER (12 SLOTS)
BATTERY CHARTER AND POWER CORD
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 14
18-15
EX 1-34
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE 900 SOFTWARE OPTIONS
2100E VISION ADVANTAGE RUNTIME RE-LICENSE
2634E TIME AND ATTENDANCE RUNTIME LICENSE
2710E BEVERAGE DISPENSER INTERFACE
2850E ENTERTAINMENT RENTALS
2860G DUAL DISK MIRROR INTERFACE KIT
UNIX DEVELOPMENT KIT
525MB EXTERNAL HARD DRIVE
* DUAL DISK SOFTWARE MUST BE PURCHASED FROM TWINCOM
6523G PERIOD TO DATE ARCHIVE OPTION
PERIOD TO DATE ARCHIVE SOFTWARE
525MB EXTERNAL HARD DRIVE
6750G MULTI-AUTH CREDIT AUTHORIZATION KIT (VISION ADVANTAGE)
2400 BAUD EXTERNAL MODEM AND CABLE
MULTI-AUTH SOFTWARE
MULTI-AUTH MANUAL AND REFERENCE GUIDES
* MULTI-AUTH REQUIRES THE USE OF A SERIAL PORT ON THE PROCESSOR
6718E MULTI-AUTH PROCESSOR OR MERCHANT NUMBER CHANGE
MERCHANT FILE TAPE
2817E NSE RUNTIME LICENSE
NSE SOFTWARE (MOTOROLA)
2818G UNIX DEVELOPMENT KIT (FOR KERNEL MODIFICATION)
UNIX DEVELOPMENT SOFTWARE (RII)
2819G TCP/IP KIT (FOR THINNET ETHERNET NETWORKS)
UNIX DEVELOPMENT KIT
NSE RUNTIME LICENSE (MOTOROLA)
THINNET KIT (MOTOROLA)
4215E ADD ON OPTION SECURITY TAPE (900 SERIES, 5.0)
SOFT PC * SOFT PC MUST BE PURCHASED FROM MOTOROLA
* REQUIRES PCPAP KIT
* REQUIRES X-TERMINAL KIT
SOFTWARE LICENSE FOR ADD ON TERMINALS EXCEEDING ORIGINAL SOFTWARE LEVEL
3743E DIFFERENCE BETWEEN ORIGINAL PURCHASED SW LEVEL AND NEW SW LEVEL
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 15
18-16
EX 1-35
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
VISION ADVANTAGE 900 COMMUNICATION OPTIONS
2685E ADVANTAGE COMMUNICATION FILES RUNTIME LICENSE
LABOR, FOOD & BEVERAGE, ACCOUNTING, RMS & PTD ASC II FILES
2657E COMMUNICATION MANAGER (M-LINK)
COMMUNICATION MANAGER AND MANUAL
2649E MS-DOS COMMUNICATION MANAGER FOR PC (M-LINK)
COMMUNICATION MANAGER AND MANUAL
2642G POLLING KIT 1-9 w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
2643G POLLING KIT 10-49 w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
2644G POLLING KIT 50-99 w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
2645G POLLING KIT 100+ w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 16
18-17
EX 1-36
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
ADVANTAGE SPARES (WITH ANNUAL MAINTENANCE AGREEMENT)
9007ES SPARE ALPHA ENTRY TERMINAL (RII)
9009ES SPARE TOUCH SCREEN TERMINAL (RII)
6524ES SPARE THERMAL PRINTER (CITIZEN CBM-210)
6525ES SPARE THERMAL AUTOCUT PRINTER (CITIZEN CMB-220)
6526ES SPARE THERMAL PRINTER (EPSON TM-T80)
6527ES SPARE THERMAL AUTOCUT PRINTER (EPSON TM-T80A)
6501ES SPARE SLIP CHECK PRINTER (EPSON 290)
6504ES SPARE IMPACT CHECK PRINTER (EPSON 300D)
6529ES SPARE AUTOCUT CHECK PRINTER (EPSON 300B)
ADVANTAGE IMPLEMENTATION SERVICES
6526E SYSTEM BACK OFFICE INSTALLATION PER DAY
2740E ADDITIONAL DAY FOR BACK OFFICE INSTALLATION
2753E EXTRA NODE INSTALLATION
EACH ADDITIONAL NETWORK
HOTEL INTERFACE
ESP CONTROL GROUP
ADDITIONAL RBS
REMOTE NETWORK
REMOTE WORKSTATION
REMOTE PRINTER
8 PORT SERIAL EXTENSION
2746E ON-SITE TRAINING PER DAY (INCLUDES TRAVEL AND EXPENSES)
2744E HOLIDAY/WEEKEND AND PRE - 30 DAY PREMIUM CHARGE
ADVANTAGE MANUALS AND DOCUMENTATION
2530E SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM
REPORTING GUIDE
2531E TRAINING MANUAL
MANAGER TRAINING GUIDE
FRONT OF HOUSE TRAINING GUIDE
SERVER TERMINAL GUIDE
2522E CONDENSED REFERENCE GUIDE
2508E MANAGER REFERENCE GUIDES (10)
2509E SERVER REFERENCE GUIDES (50)
2507E ESP REFERENCE GUIDES (50)
2520E CREDIT REFERENCE GUIDES
2526E BEVERAGE DISPENSER GUIDE
2528E MULTI-AUTH CREDIT AUTHORIZATION GUIDE
2523E NETWORK TECHNICAL REF GUIDE
2527E POLLING MGR/COMM MGR GUIDE
2508E VISION ADVANTAGE INSTALLATION GUIDE
2521E NIGHT AUDIT GUIDE
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 17
18-18
EX 1-37
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
68K TO VISION ADVANTAGE 900 SERIES SOFTWARE UPGRADE KITS
* THESE PACKAGES MUST BE RE-ORDERED FOR USE WITH THE 88K SYSTEM
2357E COMMUNICATION MANAGER RE-ORDER UPGRADE KIT (88K TO VISION ADVANTAGE)
COMMUNICATION MANAGER AND MANUAL
2358E POLLING MANAGER SOFTWARE RE-ORDER UPGRADE KIT (1-9) (88K TO VISION
ADVANTAGE)
POLLING MANAGER
COMMUNICATION MANAGER
6530E POLLING MANAGER SOFTWARE RE-ORDER UPGRADE KIT (10-49) (88K TO
VISION ADVANTAGE)
POLLING MANAGER
COMMUNICATION MANAGER
6718E MULTI-AUTH PROCESSOR OR MERCHANT NUMBER CHANGE
MERCHANT FILE TAPE
68K TO VERSION SERIES 800 ADVANTAGE SYSTEM MIGRATION
*PROCESSOR IS NOT INCLUDED, SEE VISION ADVANTAGE 800 SERIES
PROCESSORS
REQUIRED 68K TO VISION ADVANTAGE 900 SERIES ACCESSORIES
801F 68K TO VISION ADVANTAGE REQUIRED ACCESSORIES
POWER CORD
PROCESSOR TO PCV CABLE
SERIAL TO PARALLEL PRINTER CONVERTER
CRT CABLE
MODEM CABLE
SECURITY TAPE AND KEY
REQUIRED ADVANTAGE RUNTIME LICENSE
100E ADVANTAGE RUNTIME LICENSE PER TERMINAL UP TO SECURITY LEVEL SET
VISION ADVANTAGE 800 SOFTWARE LICENSES & DOCUMENTATION
SEE BELOW VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
QUICKBAK RUNTIME LICENSE
UNIFY & ACCEL w/SQL LANGUAGE RUNTIME LICENSE
SYSTEM V UNIX RUNTIME LICENSE
DOCUMENTATION
SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM CODE
REPORTING GUIDE
TRAINING MANUAL
MANAGER TRAINING GUIDE
SERVER TRAINING GUIDE
SERVER TERMINAL GUIDE
FOH TRAINING GUIDE
CONDENSED REFERENCE MANUAL
MANAGER REFERENCE GUIDES (10)
SERVER REFERENCE GUIDES (50)
800F15 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (1-5 TERMINALS)
800F87 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (6-7 TERMINALS)
801F80 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
(8 OR MORE TERMINALS)
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 18
18-19
EX 1-38
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
RMS TO VISION ADVANTAGE SERIES 900 MIGRATION
* PROCESSOR IS NOT INCLUDED, SEE VISION ADVANTAGE SERIES
800 PROCESSORS
REQUIRED RMS TO VISION ADVANTAGE 900 ACCESSORIES
902G RMS TO VISION ADVANTAGE MIGRATION REQUIRED ACCESSORIES
POWER CORD
PCV TO FIRST LAN BLOCK
PROCESSOR TO PCV CABLE
LAN BLOCK KIT
UNIX PCV MODEL 523 AND POWER SUPPLY
WYSE 60 MONOCHROME WORKSTATION
EPSON LO570 80 COLUMN DOT MATRIX PRINTER AND 1 REAM OF PAPER
SERIAL TO PARALLEL PRINTER CONVERTER 9400 BAUD MULTI-TECH EXTERNAL
MODEM AND CABLE PRINTER CABLE CRT CABLE MODEM CABLE REAM OF PAPER
SECURITY TAPE AND KEY
REQUIRED ADVANTAGE RUNTIME LICENSE
100E ADVANTAGE RUNTIME LICENSE PER TERMINAL UP TO SECURITY LEVEL SET
VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
SEE BELOW VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
QUICKBAK RUNTIME LICENSE
SYSTEM V UNIX RUNTIME LICENSE
UNIFY & ACCEL w/SQL LANGUAGE RUNTIME LICENSE
DOCUMENTATION
SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM CODE
REPORTING GUIDE
TRAINING MANUAL
MANAGER TRAINING GUIDE
SERVER TRAINING GUIDE
SERVER TERMINAL GUIDE
FOH TRAINING GUIDE
CONDENSED REFERENCE MANUAL
MANAGER REFERENCE GUIDES (10)
SERVER REFERENCE GUIDES (50)
900G15 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (1-5 TERMINALS)
9000G67 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (6-7 TERMINALS)
900G89 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (8-9 TERMINALS)
900G1011 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (10-11 TERMINALS)
900G1200 VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (12 OR MORE
TERMINALS)
RMS TO VISION ADVANTAGE 900 MIGRATION ADDITIONS (RMS 1600/1700 SYSTEMS)
2835E 486 LINE DRIVER
7000E 524 PROTOCOL CONVERTER
7001E DBOX CONVERSION KIT
7002E RS-485 CARD FRAME (DB25)
7025E RS-485 CARD CAGE (DB25) (OUTSIDE ENCLOSURE)
70004E CABLE CONVERSION KIT (DB25)
6720E SYSTEM UPS TRIPPLITE 500 8C LAN
RMS TO VISION ADVANTAGE 900 MIGRATION ADDITIONS (RMS 1800/1900/1200/1500
SYSTEMS)
2845E LINE DRIVER CARD
7003E SWITCH CARD
7022E RS-485 CARD FRAME (DB9)
7023E RS-485 CARD CAGE 9D89) (OUTSIDE ENCLOSURE)
7006E LAN BLOCK KIT
6800E RMS TERMINAL/PRINTER MIGRATION KIT
PCV, POWER SUPPLY, CPV CABLE, LAN BLOCK KIT, PCV CABLE TO LAN
6804E RBS MIGRATION KIT
5V LINEAR PS, PLAN NETWORK PCV, SURFACE MNT LAN KIT, CABLE
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 19
18-20
EX 1-39
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
SPECTRUM ADVANTAGE PROCESSORS
400H INTEL 486 PROCESSOR
COMPAQ DESKPRO, INTEL 486 PROCESSOR, 66 MHZ, 16 MB RAM,
1.44 MB 3 1/2" FLOPPY DRIVE
250MB WANGTECH TAPE DRIVE
450H INTEL 486 PROCESSOR WITH 525 MG HARD DRIVE
COMPAQ DESKPRO INTEL 486 PROCESSOR, 66 MGZ, 16 MG RAM, 1.44 MB 3
1/2" FLOPPY DRIVE 250MG WANGTECH TAPE DRIVE, 525MG HARD DRIVE,
WINDOWS AND DOS
500H INTEL PENTIUM PROCESSOR
COMPAQ DESKPRO, INTEL PENTIUM PROCESSOR, 50 MGZ, 16 MG RAM, 1.44MB
3 1/2" FLOPPY DRIVE
250 MG WANGTECH TAPE DRIVE
550H INTEL PENTIUM PROCESSOR WITH 525 MG HARD DRIVE
COMPAQ DESKPRO, INTEL PENTIUM PROCESSOR, 60 MHZ, 16MG RAM, 1.4MB
3 1/2" FLOPPY DRIVE
250 MB WANGTECH TAPE DRIVE, 525 MB HARD DRIVE, WINDOWS AND DOS
REQUIRED SPECTRUM ADVANTAGE ACCESSORIES
800F VISION ADVANTAGE 800 REQUIRED ACCESSORIES
POWER CORD
PCV TO FIRST LAN BLOCK CABLE
PROCESSOR TO PCV CABLE
LAN BLOCK KIT
UNIX PCV MODEL 523 AND POWER SUPPLY
9600 BAND MULTI-TECH SYSTEM MODEM
EPSON LQ570 80 COLUMN DOT MATRIX PRINTER AND 1 REAM OF PAPER
SERIAL TO PARALLEL PRINTER CONVERTER
SYSTEM UPS TRIPPLITE BC 500LAN
WYSE 60 MONOCHROME WORKSTATION
PRINTER CABLE
CRT CABLE
MODEM CABLE
ID KEYS AND CASE
SECURITY TAPE AND KEY
700H SPECTRUM ADVANTAGE 2 DAYS ADDITIONAL TRAINING IF CUSTOMER SOURCES PC
702H SPECTRUM ADVANTAGE INTEGRATION CHARGE IF CUSTOMER SOURCES PC
SPECTRUM ADVANTAGE A LA CARTE ITEMS WITH SYSTEM PURCHASE ONLY
2852A 4 WIRE PLENUM NETWORK CABLE (PER FOOT)
2853A 4 WIRE PVC NETWORK CABLE (PER FOOT)
SPECTRUM ADVANTAGE HARD DRIVE OPTIONS
6436H 345MB HARD DRIVE
6437H 1GB HARD DRIVE (INCLUDES WINDOWS AND DOS)
SPECTRUM ADVANTAGE MONITOR OPTIONS
6438H 14" VGA COLOR MONITOR, CABLE, MOUSE AND KEYBOARD
6439H 15" VGA COLOR MONITOR, CABLE, MOUSE AND KEYBOARD
6440H 17" VGA COLOR MONITOR, CABLE, MOUSE AND KEYBOARD
BACK OFFICE PRINTERS
6441H EPSON LQ570 80 COLUMN DOT MATRIX PRINTER, 1 REAM OF PAPER
6442H OKIDATA OL810 LASER PRINTER, 1 CASE OF PAPER
*LASER PRINTERS CANNOT BE POWERED BY THE STANDARD UPS
UNIVERSAL POWER SUPPLIES
6443H SYSTEM UPS TRIPPLITE BC 500LAN
6716E UPS FOR LASER PRINTER MODEL NPP-1400
6714E SERVER STATION UPS MODEL BC 250
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 20
18-21
EX 1-40
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
REQUIRED ADVANTAGE RUNTIME LICENSE
100E ADVANTAGE RUNTIME LICENSE PER TERMINAL UP TO SECURITY LEVEL SET
SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
SEE BELOW VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
QUICKBAK RUNTIME LICENSE
SCO UNIX RUNTIME LICENSE
UNIFY & ACCEL w/SQL LANGUAGE RUNTIME LICENSE
DOCUMENTATION
SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM CODE
REPORTING GUIDE
TRAINING MANUAL
MANAGER TRAINING GUIDE
FOH TRAINING GUIDE
SERVER TERMINAL GUIDE
CONDENSED REFERENCE MANUAL
MANAGER REFERENCE GUIDES (10)
SERVER REFERENCE GUIDES (50)
800H15 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (1-5 TERMINALS)
800H67 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (6-7 TERMINALS)
800H99 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (8-9 TERMINALS)
800H1011 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (10-11 TERMINALS)
800H1200 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (12 OR MORE
TERMINALS)
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 21
18-22
EX 1-41
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
SPECTRUM ADVANTAGE SYSTEM PROCESSORS OPTIONS
6700E ADD ON WYSE 60 MONOCHROME WORKSTATION AND CABLE
WYSE 60 MONOCHROME CRT AND CABLE
*REQUIRES A SERIAL PORT
6701E ADD ON WYSE 60 COLOR WORKSTATION AND CABLE
WYSE 60 COLOR CRT AND CABLE
*REQUIRES A SERIAL PORT
6780E REMOTE WYSE MONOCHROME WORKSTATION KIT
WYSE 60 MONOCHROME CRT AND CABLE
*REQUIRES A SERIAL PORT
6761E REMOTE WYSE 60 COLOR WORKSTATION AND CABLE
WYSE 60 COLOR CRT AND CABLE
TWO (2) SHORT HAUL MODEMS 19.2KB
*REQUIRES A SERIAL PORT
2350H ADDITIONAL NETWORK KIT
523 PROTOCOL CONVERTER, LAN BLOCK KIT, 12V POWER SUPPLY
ADDITIONAL ADVANTAGE NETWORK
*REQUIRES A SERIAL PORT
2300H REMOTE NETWORK KIT
523 PROTOCOL CONVERTER, LAN BLOCK KIT, 12 V POWER SUPPLY
ADDITIONAL ADVANTAGE NETWORK SOFTWARE
TWO (2) SHORT HAUL MODELS 19.2KB
*REQUIRES A SERIAL PORT
6713H ADD ON EPSON LQ 570 80 COLUMN PRINTER
6715H ADD ON OKIDATA OL810 LASER PRINTER AND 1 CASE OF PAPER
*REQUIRES A SERIAL PORT
6780H REMOTE 80 COLUMN PRINTER KIT
80 COLUMN PRINTER AND SERIAL TO PARALLEL PRINTER CONVERTER
TWO (2) SHORT HAUL MODEMS 19.2KB
*REQUIRES A SERIAL PORT
6446H SPECTRUM ADVANTAGE ADDITIONAL 1 PORT
SIIG I/O CARD 1.9 PIN SERIAL PORT
6444H SPECTRUM ADVANTAGE ADDITIONAL 4 PORTS
DIGI PC/4 FOR LANS
6445H SPECTRUM ADVANTAGE ADDITIONAL 8 PORTS
DIGI PC/8 FOR LANS
2632E PMSI HOTEL INTERFACE PACKAGE
PMSI SOFTWARE, HOTEL LINK 520 PCV AND POWER SUPPLY,
NIGHT AUDIT GUIDE
2633E HMS HOTEL INTERFACE PACKAGE
HMS SOFTWARE, HOTEL LINK 520 PCV AND POWER SUPPLY, NIGHT
AUDIT GUIDE
6717E 2400 BAUD HAYES EXTERNAL MODEM AND CABLE
6711E 9400 BAUD MULTI-TECH EXTERNAL MODEM AND CABLE
6720E SYSTEM UPS TRIPPLITE BC 500 LAN
2837H ADDITIONAL 345MB HARD DRIVE
6447H ADDITIONAL 540MB HARD DRIVE
6448H ADDITIONAL 1GB HARD DRIVE
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 22
18-23
EX 1-42
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
SPECTRUM ADVANTAGE ESP OPTIONS PRICE WITH SYSTEM PURCHASE ONLY
* THIS PRICE AVAILABLE ONLY IF PURCHASED WITH THE SYSTEM
9900E ESP II CONTROL GROUP
RADIO BASE STATION, ANTENNA, PLAN PCV AND POWER CORD
BATTERY CHARTER AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
TELCO CABLE (PCV TO LAN BLOCK)
ESP REFERENCE GUIDES (50)
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 23
18-24
EX 1-43
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
SPECTRUM ADVANTAGE TERMINALS
9007E ALPHA ENTRY TERMINAL (RII)
TERMINAL STAND AND 10 KEY READER
9009E TOUCH SCREEN TERMINAL (RII)
TERMINAL STAND AND 10 K EY READER
8005E ESP II TERMINAL (RII)
2 ESP BATTERIES
100E TERMINAL SECURITY LEVEL ADD ON
SPECTRUM ADVANTAGE TERMINAL OPTIONS
6101E MAGNETIC STRIPE READER
8201AE SINGLE SIDED SATELLITE
6300E CASH DRAWER & TILL
6130E TERMINAL SUNSCREEN
6301E ADDITIONAL CASH DRAWER INSERT
SPECTRUM ADVANTAGE BAR CODE SCANNER OPTIONS
7500E LASER SCANNER BOH PC KEYBOARD
7501E LASER SCANNER FOH TERMINAL
7502E CCD SCANNER BOH WYSE 60 KEYBOARD
7503E CCD SCANNER FOH TERMINAL
7504E WAND READER BOH WYSE 60 KEYBOARD
7505E WAND READER FOH TERMINAL
7506E ADDITIONAL WYSE 60 KEYBOARD CABLE FOR LASER OR CCD SCANNER
7507E ADDITIONAL FOH TERMINAL CABLE FOR LASER OR CCD SCANNER
SPECTRUM ADVANTAGE PRINTERS
6501E SLIP CHECK PRINTER (EPSON 290)
6514E THERMAL CHECK PRINTER (CITIZEN CBM-210)
6520E THERMAL AUTOCUT CHECK PRINTER (CITIZEN CBM-220)
6506E THERMAL CHECK PRINTER & EXTERNAL POWER SUPPLY (EPSON TM-T80)
6507E THERMAL AUTUCUT PRINTER & EXTERNAL POWER SUPPLY (EPSON TM-T80A)
6517E IMPACT CHECK PRINTER (EPSON 3000)
6504E IMPACT AUTOCUT PRINTER (EPSON 3006)
SPECTRUM ADVANTAGE REMOTE PRINTERS
* ALL REMOTE PRINTERS INCLUDE PCV, POWER SUPPLY, AND CABLE
6518E REMOTE THERMAL CHECK PRINTER (CITIZEN CBM-210)
6521E REMOTE THERMAL AUTOCUT CHECK PRINTER (CITIZEN CBM-220)
6508E REMOTE THERMAL CHECK PRINTER (EPSON TM-T80)
6509E REMOTE THERMAL AUTOCUT PRINTER (EPSON TM-T80A)
6515E REMOTE IMPACT CHECK PRINTER (EPSON 3000)
6500E REMOTE IMPACT AUTOCUT CHECK PRINTER (EPSON 3008)
6522E REMOTE DESKJET PRINTER (*CONVERTER MAY BE REQUIRED)
6823E REMOTE PRINTER ADAPTER KIT
5842E *SERIAL TO PARALLEL CONVERTER AND DB9 TO DB25 CONNECTOR
SPECTRUM ADVANTAGE ESP OPTIONS
9912E ESP II CONTROL GROUP
RADIO BASE STATION, ANTENNA, PLAN PCV AND POWER CORD
BATTERY CHARGER AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
TELCO CABLE (PCV TO LAN BLOCK)
ESP REFERENCE GUIDES (50)
2912E RBS II CONTROL GROUP
RADIO BASE STATION, ANTENNA, PLAN PCV AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
2902E ESP II BATTERY CHARTER (12 SLOTS)
BATTERY CHARTER AND POWER CORD
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 24
18-25
EX 1-44
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
SPECTRUM ADVANTAGE SOFTWARE OPTIONS
2100H SPECTRUM ADVANTAGE RUNTIME RE-LICENSE
2834 TIME AND ATTENDANCE RUNTIME LICENSE
2701E BEVERAGE DISPENSER INTERFACE
2650E ENTERTAINMENT RENTALS
2860E DUAL DISK MIRROR INTERFACE KIT
UNIX DEVELOPMENT KIT
220MB EXTERNAL HARD DRIVE
* DUAL DISK SOFTWARE MUST BE PURCHASED FROM TWINCOM
* WILL BE RELEASED SHORTLY DO NOT SELL
6523E PERIOD TO DATE ARCHIVE OPTION
PERIOD TO DATE ARCHIVE SOFTWARE
345MB EXTERNAL HARD DRIVE
* WILL BE RELEASED SHORTLY DO NOT SELL
6750E MULTI-AUTH CREDIT AUTHORIZATION KIT (VISION ADVANTAGE)
2400 BAUD EXTERNAL MODEM AND CABLE
MULTI-AUTH SOFTWARE
MULTI-AUTH MANUAL AND REFERENCE GUIDES
*REQUIRES A SERIAL PORT
6718E MULTI-AUTH PROCESSOR OR MERCHANT NUMBER CHANGE
MERCHANT FILE TAPE
6950H ADD ON OPTION SECURITY TAPE (SPECTRUM ADVANTAGE, 5.0)
SOFTWARE LICENSE FOR ADD ON TERMINALS EXCEEDING ORIGINAL SOFTWARE LEVEL
3743E DIFFERENCE BETWEEN ORIGINAL PURCHASED SW LEVEL AND NEW SW LEVEL
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 25
18-26
EX 1-45
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
SPECTRUM ADVANTAGE COMMUNICATION OPTIONS
2647H COMMUNICATION MANAGER (M-LINK)
COMMUNICATION MANAGER AND MANUAL
2649E MS-DOS COMMUNICATION MANAGER FOR PC (M-LINK)
COMMUNICATION MANAGER AND MANUAL
2642H POLLING KIT 1-9 w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
*REQUIRES A SERIAL PORT
2643H POLLING KIT 10-49 w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
*REQUIRES A SERIAL PORT
2644H POLLING KIT 50-99 w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
*REQUIRES A SERIAL PORT
2645H POLLING KIT 100+ w/RUNTIME LICENSE
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM AND CABLE
COMMUNICATION MANAGER
*REQUIRES A SERIAL PORT
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 26
18-27
EX 1-46
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
SPECTRUM ADVANTAGE SPARES (WITH ANNUAL MAINTENANCE AGREEMENT)
9007ES SPARE ALPHA ENTRY TERMINAL (RII)
9009ES SPARE TOUCH SCREEN TERMINAL (RII)
8524ES SPARE THERMAL PRINTER (CITIZEN CBM-210)
8525ES SPARE THERMAL AUTOCUT PRINTER (CITIZEN CBM-220)
8526ES SPARE THERMAL PRINTER (SPSON TM-T80)
8527ES SPARE THERMAL AUTOCUT PRINTER (EPSON TM-T80A)
8501ES SPARE SLIP CHECK PRINTER (EPSON 290)
8504ES SPARE IMPACT CHECK PRINTER (EPSON 300D)
8529ES SPARE AUTOCUT CHECK PRINTER (EPSON 300B)
SPECTRUM ADVANTAGE IMPLEMENTATION SERVICES
6528E SYSTEM BACK OFFICE INSTALLATION PER DAY
2740E ADDITIONAL DAY FOR BACK OFFICE INSTALLATION
2753E EXTRA MODE INSTALLATION
EACH ADDITIONAL NETWORK
HOTEL INTERFACE
ESP CONTROL GROUP
ADDITIONAL RBS
REMOTE NETWORK
REMOTE WORKSTATION
REMOTE PRINTER
8 PORT SERIAL EXTENSION
2748E ON-SITE TRAINING PER DAY (INCLUDES TRAVEL AND EXPENSES)
2744E HOLIDAY/WEEKEND AND PRE - 30 DAY PREMIUM CHARGE
SPECTRUM ADVANTAGE MANUALS AND DOCUMENTATION
2530E SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM
REPORTING GUIDE
2531E TRAINING MANUAL
MANAGER TRAINING GUIDE
FRONT OF HOUSE TRAINING GUIDE
SERVER TERMINAL GUIDE
2522E CONDENSED REFERENCE GUIDE
2508E MANAGER REFERENCE GUIDES (10)
2509E SERVER REFERENCE GUIDE (50)
2507 E ESP REFERENCE GUIDES (50)
2528E BEVERAGE DISPENSER GUIDE
2828E MULTI-AUTH CREDIT AUTHORIZATION GUIDE
2523E SPECTRUM ADVANTAGE NETWORK TECHNICAL REF GUIDE
2527E POLLING MGR / COMM MGR GUIDE
2508E SPECTRUM ADVANTAGE INSTALLATION GUIDE
2521E NIGHT AUDIT GUIDE
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 27
18-28
EX 1-47
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
68K TO SPECTRUM ADVANTAGE SOFTWARE ONLY KITS
* THESE PACKAGES MUST BE RE-ORDERED FOR USE WITH THE 99K SYSTEM
2357E COMMUNICATION MANAGER RE-ORDER UPGRADE KIT (88K TO VISION ADVANTAGE)
COMMUNICATION MANAGER AND MANUAL
2358E POLLING MANAGER SOFTWARE RE-ORDER UPGRADE KIT (1-9) (88K TO VISION
ADVANTAGE) POLLING MANAGER COMMUNICATION MANAGER *REQUIRES SERIAL PORT
6530E POLLING MANAGER SOFTWARE RE-ORDER UPGRADE KIT (10-49) (88K TO
VISION ADVANTAGE)
POLLING MANAGER
COMMUNICATION MANAGER
*REQUIRES SERIAL PORT
6718E MULTI-AUTH PROCESSOR OR MERCHANT NUMBER CHANGE
MERCHANT FILE TAPE
*REQUIRES SERIAL PORT
68K TO SPECTRUM ADVANTAGE SYSTEM MIGRATION
*PROCESSOR IS NOT INCLUDED, SEE VISION ADVANTAGE 800 SERIES
PROCESSORS
REQUIRED SPECTRUM ADVANTAGE SERIES ACCESSORIES
801F 68K TO VISION ADVANTAGE REQUIRED ACCESSORIES
PROCESSOR TO PCV CABLE
SECURITY TAPE AND KEY
ADDITIONAL SINGLE SERIAL PORT
PC TAPE BACK UP PROGRAM
REQUIRED ADVANTAGE RUNTIME LICENSE
100E ADVANTAGE RUNTIME LICENSE PER TERMINAL UP TO SECURITY LEVEL SET
SPECTRUM ADVANTAGE 800 SOFTWARE LICENSES & DOCUMENTATION
SEE BELOW SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
ADVANTAGE RUNTIME LICENSE
QUICKBAK RUNTIME LICENSE
UNIFY & ACCEL w/SQL LANGUAGE RUNTIME LICENSE
SCO UNIX RUNTIME LICENSE
ADVANTAGE COMMUNICATION FILES RUNTIME LICENSE (ASC II AND WKS)
DOCUMENTATION
SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM CODE
REPORTING GUIDE
TRAINING MANUAL
MANAGER TRAINING GUIDE
SERVER TRAINING GUIDE
SERVER TERMINAL GUIDE
FOH TRAINING GUIDE
CONDENSED REFERENCE MANUAL
MANAGER REFERENCE GUIDES (10)
SERVER REFERENCE GUIDES (50)
600H15 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (1-5 TERMINALS)
600H67 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (6-7 TERMINALS)
600H80 SPECTRUM VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (8 OR MORE
TERMINALS) 700H SPECTRUM ADVANTAGE 2 DAYS ADDITIONAL TRAINING IF CUSTOMER
SOURCES PC 701H SPECTRUM ADVANTAGE INTEGRATION CHARGE IF CUSTOMER SOURCES PC
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 28
18-29
EX 1-48
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
RMS TO SPECTRUM ADVANTAGE MIGRATION * PROCESSOR IS NOT INCLUDED, SEE VISION
ADVANTAGE SERIES 800 PROCESSORS REQUIRED SPECTRUM ADVANTAGE ACCESSORIES 602F RMS
TO VISION ADVANTAGE MIGRATION REQUIRED ACCESSORIES PCV TO FIRST LAN BLOCK
PROCESSOR TO PCV CABLE LAN BLOCK KIT UNIX PCV MODEL 523 AND POWER SUPPLY 9600
BAUD MULTI-TECH EXTERNAL MODEM AND CABLE ADDITIONAL SINGLE SERIAL PORT PRINTER
CABLE MONITOR CABLE MODEM CABLE REAM OF PAPER SECURITY TAPE AND KEY PC TAPE BACK
UP PROGRAM
REQUIRED ADVANTAGE RUNTIME LICENSE
100E ADVANTAGE RUNTIME LICENSE PER TERMINAL UP TO SECURITY LEVEL SET
SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
SEE BELOW VISION ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION
QUICKBAK RUNTIME LICENSE
SCO UNIX RUNTIME LICENSE
UNIFY & ACCEL w/SQL LANGUAGE RUNTIME LICENSE
DOCUMENTATION
SYSTEM MANUAL
FEATURE GUIDE
PLANNING GUIDE
MAINTAINING THE SYSTEM CODE
REPORTING GUIDE
TRAINING MANUAL
MANAGER TRAINING GUIDE
SERVER TRAINING GUIDE
SERVER TERMINAL GUIDE
FOH TRAINING GUIDE
CONDENSED REFERENCE MANUAL
MANAGER REFERENCE GUIDES (10)
SERVER REFERENCE GUIDES (50)
600F15 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (1-5 TERMINALS)
600F87 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (6-7 TERMINALS)
601F89 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (8-9 TERMINALS)
600F1011 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (10-11 TERMINALS)
601F1200 SPECTRUM ADVANTAGE SOFTWARE LICENSES & DOCUMENTATION (12 OR MORE
TERMINALS) 700H SPECTRUM ADVANTAGE 2 DAYS ADDITIONAL TRAINING IF CUSTOMER
SOURCES PC 701H SPECTRUM ADVANTAGE INTEGRATION CHARGE IF CUSTOMER SOURCES PC
RMS TO VISION ADVANTAGE MIGRATION ADDITIONS (RMS 1600/1700 SYSTEMS)
2835E 485 LINE CONVERTER
7000E 524 PROTOCOL CONVERTER
7001E DBOX CONVERSION KIT
7002E RS-485 CARD FRAME (0825)
7025E RS-485 CARD CAGE (DB25) (OUTSIDE ENCLOSURE)
6720E SYSTEM UPS TRIPPLITE BC 500 LAN
RMS VISION ADVANTAGE MIGRATION ADDITIONS (RMS 1800/1900/1200/1500 SYSTEMS)
2845E LINE DRIVER CARD
7003E SWITCH CARD
7022E RS-485 CARD FRAME (D89)
7023E RS-485 CARD CAGE (D89) (OUTSIDE ENCLOSURE)
7005E LAN BLOCK KIT
6800E RMS TERMINAL/PRINTER MIGRATION KIT
PCV, POWER SUPPLY, PCV CABLE LAN BLOCK KIT, PCV CABLE TO LAN
6804E RBS MIGRATION KIT
SV LINEAR PS, PLAN NETWORK PCV, SURFACE MNT LAN KIT, CABLE
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 29
18-30
EX 1-49
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
MISCELLANEOUS
68K HARDWARE OPTIONS
2810E 4 PORT SERIAL BOARD
2811E 8 PORT SERIAL BOARD
2804E 330MB INTERNAL HARD DRIVE (68K PRIMARY)
2805E 330MB INTERNAL HARD DRIVE (68K SECONDARY)
2834E 150MB EXTERNAL TAPE DRIVE
2835E LINE DRIVER
2800E 8MB MEMORY BOARD
6150E HIGH RESOLUTION TERMINAL CONVERSION KIT
68K SOFTWARE UPGRADES
*POLLING, COMMUNICATION MANAGER & MULTI-AUTH MUST BE RE-ORDERED FOR USE
WITH 5.0 ON 68K
3000E 1.5 X, 2.0 X OR 2.1.X TO 5.0 UPGRADE PACKAGE
ADVANTAGE RELEASE 5.0 RUNTIME LICENSE
TIME AND ATTENDANCE SOFTWARE
UNIX RUNTIME LICENSE
QUIK BACK BACKUP / RESTORE PROGRAM
330MB HARD DRIVE
150MB TAPE DRIVE
ENHANCED DOCUMENTATION SET
INSTALLATION AND 3 DAYS MANAGER / SERVER TRAINING
SECURITY TAPE AND KEY
3020E 2.5.X TO 5.0 UPGRADE PACKAGE
ADVANTAGE RELEASE 5.0 RUNTIME LICENSE
TIME AND ATTENDANCE SOFTWARE
UNIX RUNTIME LICENSE
1 DAY MANAGER / SERVER TRAINING
3022E COMMUNICATION MANAGER (MLINK) RE-ORDER UPGRADE TO 5.0 FOR 68K
COMMUNICATION MANAGER (MLINK)
3021E POLLING MANAGER SOFTWARE ONLY RE-ORDER UPGRADE TO 5.0 68K
POLLING MANAGER
COMMUNICATION MANAGER
6718E MULTI-AUTH PROCESSOR OR MERCHANT NUMBER CHANGE
MERCHANT FILE TAPE
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 30
18-31
EX 1-50
<PAGE>
AMERICAS DIRECT PRICE LIST RELEASE 10/11/95 4:16 PM
PRODUCT
NUMBER ITEM DESCRIPTION
68K SOFTWARE OPTIONS
6647E COMMUNICATION MANAGER (M-LINK) FOR 88K (RELEASE 5.0 AND ABOVE)
COMMUNICATION MANAGER AND MANUAL
2648E COMMUNICATION MANAGER (MLINK) FOR 68K (RELEASE 3.0 AND BELOW)
COMMUNICATION MANAGER AND MANUAL
6469E POLLING MANAGER FOR 68K (1-9) (RELEASE 5.0 AND ABOVE)
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM
COMMUNICATION MANAGER (MLINK)
6470E POLLING MANAGER FOR 68K (10-49) (RELEASE 5.0 AND ABOVE)
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM
COMMUNICATION MANAGER (MLINK)
2851E POLLING MANAGER FOR 68K (1-9) (RELEASE 3.0 AND BELOW)
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM
COMMUNICATION MANAGER (MLINK)
6472E POLLING MANAGER FOR 68K (10-49) (RELEASE 3.0 AND BELOW)
POLLING MANAGER
2400 BAUD VENTEL EXTERNAL MODEM
COMMUNICATION MANAGER (MLINK)
6751E MULTI-AUTH FOR 68K
2400 BAUD MODEM
MULTI-AUTH SOFTWARE
MULTI-AUTH MANUAL AND REFERENCE GUIDES
2018E FULL UNIX FOR (68K)
4216E ADD ON OPTION SECURITY TAPE (68K 5.0)
4015E ADD ON OPTION SECURITY TAPE (68K 3.0)
3742E ADD ON OPTION SECURITY TAPE (68K 2.5 OR BELOW)
6719E NSE RUNTIME LICENSE FOR 68K
2918E 68K UNIX DEVELOPMENT KIT (FOR KERNEL MODIFICATION)
RMS OPTIONS
9913E RMS ESP II CONTROL GROUP
RADIO BASE STATION, ANTENNA AND POWER CORD
BATTERY CHARGER AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
TELCO CABLE (PCV TO LAN BLOCK)
RMS RLANPGM SOFTWARE
ESP REFERENCE GUIDES (50)
2913E RMS RBS II CONTROL GROUP
RADIO BASE STATION, ANTENNA AND POWER CORD
LAN BLOCK KIT AND TELCO CABLE
RMS PLAN.PGM SOFTWARE
REMANCO INTERNATIONAL, INC. o COMPANY CONFIDENTIAL
PAGE 31
18-32
EX 1-51
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROCESSOR 1150 00100217
2 CPU, PCB 1150 00100089
2 BD, 517 08020000000
2 BD, MEMORY 128K 08507000007
2 BD, MEMORY 256K 08507000001
2 BD, MEMORY 512K 08507000002
2 BD, 86/12A 90100100723
3 FINAL ASY * PS 1150 90100100325
3 PCB ASY * FAN PS 1150 90100100338
3 DRIVE, DISK 0 QUME 90100100561
3 DRIVE, DISK 1 QUME 90100100562
3 BD, UCOMMS 90100100861
3 1150 BACKPLANE WITH/CC 90100101421
3 1150 BACKPLANE WITHOUT/CC 90100100410
3 BD, 1150 TRANSITION 00100219
3 CAGE, CD W/BP 1150 90100101422
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 FINL ASY* 2510 HARD DISK UNIT 90100101133
2 DISK, FIXED IMI 08060000003
2 BD, HD CONT WBD 13/14 8880338
2 BD, TIMER 2510 90100100940
2 PS, 5V HD IMI 90100101020
2 PS, 12V HD IMI 90100101021
(rev 3 01/18/91)
18-33
EX 1-52
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROCESSOR 1160 BASIC 90100101273
1 UNIT, PROCESSOR 1160 W/OPTNS 90100101275
2 BD, HOST ADAPTER 08020000001
2 BD, MD CONTI 02A-05A 08020000002
2 DISK, FXD HD SEGATE 08505000008
2 DRIVE, DISK 51/4" PANASONIC 08505000010
2 HD, MEMORY 512K 08507000002
2 BD, MEMORY 1 MEG (CHRISLIN) 08570000005
2 CAGE, CD W/O BP 11660 90100101015
2 BD, BACKPLANE 1160/1170 90100101042
2 BD, PWR, 1160 90100101329
2 BD, PS CONTROLLER 90100101331
2 PS, ASSY 1160 90100101334
2 BD, CPU 15/17/18/1900 90100101499
3 BD, UCOMMS 90100100661
3 CAGE, CD W/BP 1170 90100101294
(rev 3 02/18/91)
18-34
EX 1-53
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROCESSOR 1170 90100101645
2 BD, HOST ADAPTER 08020000001
2 BD, HD CONT 02A-05A 08020000002
2 DISK, FXD HD SEGATE 08505000008
2 DRIVE, DISK 51/4PANASONIC 08505000010
2 BD, MEMORY 512K 08507000002
2 BD, MEMORY 1 MEG (CHRISLIN 08507000005
2 CAGE, CD W/O BP 1160 90100101015
2 BD, BACKPLANE 1160/1170 90100101042
2 BD, PIC, LAN 90100101505
2 BD, CPU 15/17/18/1900 90100101499
3 BD, UCOMMS 90100100861
3 BD, DISK CONTROLLER - 1160 90100101148
3 PS, ASY 110V 1170 15/18/1900 90100101559
3 PCB ASY, RLAN 90100102546
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 FINAL ASY * 1455 TERMINAL 0880288
(rev 3 02/18/91)
18-35
EX 1-54
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, 1900 PROCESSOR 90100102966
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, DISTR-BAT B/U 1260 00100220
BD, PWR CONTROL 1260 00100221
BD, SWITCH 1260 00100223
ASSY, PWR TRAY 1260-NO BATTERY 90100100336
ASSY, PWR TRAY 1261 90100101047
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, CHARTER, ESP BAT 1270V 8882003
UNIT, CHARGER, ESP BAT 1270 90100102690
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, CONSOLE 1330 00100225
SSI, CRT CONTROL 1330 00100226
RT ASST, TUBE W/BD 1330 08001080001
18-36
EX 1-55
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
2 BD, CRT SURGE 1330 90100100025
2 PS, CRT 1330 90100100323
3 UNIT, KEY BD 1330 90100100892
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, RADIO BASE 1370V 8882094
UNIT, RADIO BASE 1370 90100102632
BD, LAN REMOTE 1370V 8882045
BD, DIGITAL 1370V 8882052
BD, REGULATOR 1370V 8882060
BD, XCVR 1370V 8882078
BD, RLAN CONTROLLER VALIDEC 8882086
BD, REGULATOR 1370 90100102332
BD, LAN REMOTE 1370 90100102610
BD, XCVR 1370 90100102612
BD, DIGITAL 1370 90100102614
FNL ASSY* RBS ANTENNA 90100102680
UNIT, FIELD STRENGTH METER, ESP 90101202781
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, STANDALONE 1435 90100100128
BD, CONTROLLER 1435 90100100136
BD, PS 1435 90100100303
18-37
EX 1-56
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, TERMINAL 1440 90100100368
BD, DISPLAY 2010 00100183
BD, POWER SUPPLY 00100231
BD, TRANSITION 1440/2010 00100232
BD, CONTROLLER 1440 90100100137
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, DISPLAY PED MT 1445 90100101071
UNIT, DISPLAY WALL MT 1445 90100101076
BD, CONTROLLER 1445 90100100967
BD, DISPLAY 1445 90100100969
BD, MOTHER 1445 90100100971
ASY* POST, FAB 90100100963
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT*, SATELLITE DISPLY 1449 90100102367
UNIT, DISPLAY PED MT 1449 90100102379
UNIT, DISPLAY WALL MT 1449 90100102380
BD, DISPLAY 1449 90100102361
DISPLAY CONTROL 1449 90100102363
ASSY, DISPLAY 1449 90100102365
18-38
EX 1-57
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, TERMINAL 1450 90100101218
2 BD, CONTROLLER 1450 90100100957
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, TERMINAL 1460 90100101484
2 BD, CONTROLLER 1460 90100101534
2 BD, COMMS I/O 1460/1460A 90100101537
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, TERMINAL 1460A 90100102495
2 BD, COMMS I/O 1460/1460A 90100101537
2 BD, BROADCAST 1460A 90100102143
2 BD, CONTROLLER 1460A 90100102392
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, BAR INTERFACE 1461 90100102097
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, HHT VALIDEC 1470V 8882029
1 UNIT, ESP REMANCO 1470 (2387A) 90100102979
18-39
EX 1-58
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER 1530 00100233
2 BD, PAPER OUT 1530 00100143
2 MECH, PRINTER EPSON 1530 08040000001
2 BD, DRIVER 1530/1532 90100100083
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER, SLIP 1532 90100102073
2 MECH, PRINTER EPSON 1532 08040000285
2 BD, DRIVER 1530/1532 90100100083
2 BD, INTERFACE 1532 90100102056
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, DRIVER 1540 8880296
2 BD CONTROLLER 1540 90100101334
2 BD, TRANSITION 1540 90100101357
3 MECH, PRINTER 1540/1540A 08050000000
3 BD, SWITCH 1540 90100101539
3 SENSOR, PAPER 1540 90100101732
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER 1540A 90100101630
2 BD, CONTROLLER 1540A 8880304
BD, TRANSITION 1540A 90100101557
3 MECH, PRINTER 1540/1540A 08050000000
18-40
EX 1-59
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
3 BD, SWITCH 1540 90100101639
3 SENSOR, PAPER 1540 90100101732
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER 1541 90100102407
2 MECH, PRINTER 1541 08040000287
2 PS, 1541 08070000014
2 BD, INDICATOR/SW 1541 90100102412
2 BD, CONTROLLER 1541 90100102477
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, 1542 SLIP PRINTER, 115VA 08040000083
1 UNIT, PRINTER SLIP 7211 90100101523
3 P.S. PCB 110V 08040000280
3 P.S. PCB 220V 08040000281
3 I/O PCB SERIES 500 08040000282
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER SLIP 1542, 110V 08040000288
UNIT, 1545 SLIP PRNTR, S600, 220V 08040000289
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRESET 1710 90100100087
BD, TRANSITION 1710 90100100040
18-41
EX 1-60
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
2 ASST, MEMB SW 1710 9010011370
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRESET 1720 8880601
1 BD, ASST 1720/1720A 90100101536
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRESET 1720A 90100101493
BD, ASSY 1720/1720A 90100101536
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, CASH DRAWER 1830 00100235
BD, DRIVER 1830 00100236
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, CASH DRAWER 1840 90100101518
BD, DRIVER 1840 90100101507
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, 2010 REMOTE ACCUMULATOR 90100100777
BD, DISPLAY 2010 00100183
BD, POWER SUPPLY 00100231
BD, TRANSITION 1440/2010 00100232
BD, RADATAR 900100100875
v 2 12/03/901
18-42
EX 1-61
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, DC EXTENDER 2110 90100100402
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, AC EXTENDER 2110, 110V 90100101097
1 UNIT, AC EXTENDER 2120, 220V 90100101098
3 PCB& 2120 CABLE EXTENDER 90100100942
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER DX2100 8880411
3 PRINTERHEAD* FUJITSU DX2100/2300 8880437
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER DX2300 08040000286
3 PRINTHEAD* JUJITSU DX2100/2300 8880437
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, FILTER BOX 90100101265
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER EPSON FX100 08040000127
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 CRT W/KEYBD KT70 110V 08001000002
UNIT, MONITOR KT7 KIMTRON 8880239
UNIT, MONITOR KT70 KIMTRON 8880247
(rev 2 12/03/90)
18-43
EX 1-62
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, KEYBOARD KIMTRON 08040000230
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, MODEM, GANDALE 24A DIALUP 8880197
1 UNIT, MODEM, LDSI 8880205
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER EPSON MX80 08040000005
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER EPSON RX80 08040000069
2 BD, SER INTERFACE 08040000019
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PS SAFT UPS 110V 080700000007
1 UNIT PS ELGAR UPS 8880270
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, TERM 220 AEST VIS 90100103115
1 ASSY, CD RDR TRK 2 VIS TERM 90100103081
2 BD, CONTROLLER AEST VIS 90100103104
2 BASE, TERM 90501002934
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, TERM 240 FST VIS 90100103099
(REV 2 12/03/90)
18-44
EX 1-63
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 BD, CONTROLLER EST VIS 90100103027
BD, TERM VIDEO EST VIS 90100103032
ASST, INVERTER VIS TERM 240/260 90100103077
ASST, KEY READER VIS TERM 90100103080
ASST, CD RDR TRK 2 VIS TERM 90100103081
ASST, CD RDR TRK 1&2 240/260 90100103106
BASE, TERM 90501002954
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, TERM 260 TST VIS 90100103082
BD, CONTROLLER FST VIS 90100103027
BD, TERM VIDEO FST VIS 90100103032
ASST, INVERTER VIS TERM 240/260 90100103077
ASST, KEY READER VIS TERM 90100103080
ASST, CD RDR TRK 2 VIS TERM 90100103081
ASST, CD RDR TRK 1&2 240/260 90100103106
SCREEN, TOUCH VIS TERM 260 TST 90301003015
BASE, TERM 90501002954
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, SAT DISPLAY VIS 320 90100103035
BD, CONTROLLER SAT DISPLAY VIS 90100103067
(REV 2 12/03/90)
18-45
EX 1-64
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, SAT DISPLAY DBL VIS 322 90100103189
BD, CONTROLLER SAT DISPLAY VIS 90100103203
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, CASH DRAWER MMF VIS 330 08008000008
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, PROCESSOR 4000 VIS 140 90101303071
DRIVE, FLOPPY 3.5 4000 VIS 08505000012
BD, 4MB EXPAN RAM 4000 VIS 08505000015
DRIVE, HD 104MB 3.5" 08505000017
BD, 4 PORT SERIAL 08507000007
PS, PROCESSOR 4000 VIS 8883555
DRIVE, DISK 51/44000 VIS 8883571
BD, CPU 25MHZ VIS 90101303130
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, PRINTER MEMODYNE VIS 420 08040000303
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, PRINTER SLIP 290 VIS 421 08040000302
(REV 2 12/03/90)
18-46
EX 1-65
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER IMPACT 267 VIS 422 08040000304
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER AUTOCUTTER VIS 423 08040000305
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER SHARP LAZ VIS 424 08040000307
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER STAR IMPACT VIS 425 08040000308
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, LINE DRIVER 485 VIS 90100103283
2 BD, LINE DRIVER 485 VIS 90100103246
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, TAPE STREAM, ARCH VP2150ES 08303000003
1 UNIT, PROCESSOR 5000 32MHZ 90100103453
1 UNIT, PROCESSOR 5000 25MHZ 90101303168
2 DRIVE, TAPE 150MB MOTOROLA 08503000002
2 DRIVE, HD 170MEG 3.5" 08505000018
2 BD, 4 PORT SERIAL 08507000007
2 BD, CPU 25MHZ VIS 90101303130
2 BD, CPU 32MHZ VIS 90101303454
(REV 2 12/03/90)
18-47
EX 1-66
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROTOCOL CONV UNIX VIS 520 90100102901
2 BD, PROTOCOL CONV UNIX VIS 90100102892
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROTOCOL CONV 1460 VIS 521 90100102912
2 BD, PROTOCOL CONV 1460 VIS 90100102911
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROTOCOL CONV R-LAN VIS 522 90100102894
2 UNIT, PROTOCOL CONV R-LAN VIS 90100102891
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, WYSE 60 W/KYBD 110V V530 08001000303
1 UNIT, WYSE 60 W/KYBD 220V V530 08001000304
2 CRT* WYSE 60 (W/OUT KEYBOARD) 8884744
2 KEYBOARD* WYSE 60 (530) 8884769
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER EPSON 1050 VIS 542 08040000301
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PS UPS 425A VIS 08070000020
1 UNIT, PS UPS 800 VIS 08070000041
(REV 2 12/03/91)
18-48
EX 1-67
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, MODEM GANDOLF VIS 7610145
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, MODEM VENTAL 2400-33 V561 08020000012
(REV 2 12/03/90)
18-49
EX 1-68
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROCESSOR 1150 00100217
2 CPU, PCB 1150 00100089
2 BD, 517 08020000000
2 BD, MEMORY 128K 08507000000
2 BD, MEMORY 256K 08507000001
2 BD, MEMORY 512K 08507000002
2 BD, 86/12A 90100100723
3 FINAL ASY * PS 1150 90100100325
3 PCB ASY * FAN PS 1150 90100100338
3 DRIVE, DISK 0 QUME 90100100561
3 DRIVE, DISK 1 QUME 90100100562
3 BD, UCOMMS 90100100861
3 1150 BACKPLANE WITH /CC 90100101421
3 1150 BACKPLANE WITHOUT/CC 90100100410
3 BD, 1150 TRANSITION 00100219
3 CAGE, CD W/BP 1150 90100101422
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 FNL ASY*2510 HARD DISK UNIT 90100101133
2 DISK, FIXED IMI 08060000003
2 BD, HD CONT WDB 13/14 8880338
2 BD, TIMER 2510 90100100940
2 PS, 5V HD IMI 90100101020
2 PS, 12V HD IMI 90100101021
(REV 3 02/18/91)
18-50
EX 1-69
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROCESSOR 1180 BASIC 90100101273
1 UNIT, PROCESSOR 1160 W/OPTNS 90100101275
2 BD, HOST ADAPTER 08020000001
2 BD, HD CONT 02A-05A 08020000002
2 DISK, FIXED HD SEAGATE 08505000008
2 DRIVE, DISK 51/4PANASONIC 08505000010
2 BD, MEMORY 512K 08507000002
2 BD, MEMORY 1 MEG (CHRISLIN) 08507000005
2 CAGE, CD W/O BP 1160 90100101015
2 BD, BACKPLANE 1160/1170 90100101042
2 BD, PWR, 1160 90100101329
2 BD, PS CONTROLLER 90100101331
2 PS, ASSY 1160 90100101334
2 BD, CPY 15/17/18/1900 90100101499
3 BD, UCOMMS 90100100861
3 CAGE, CD W/BP 1170 90100101294
(REV 3 02/18/91)
18-51
EX 1-70
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROCESSOR 1170 90100101645
2 BD, HOST ADAPTER 08020000001
2 BD, HD CONT 02A-05A 08020000002
2 DISK, FXD HD SEAGATE 08505000008
2 DRIVE, DISK 51/4PANASONIC 08505000010
2 BD, MEMORY 512K 08507000002
2 BD, MEMORY 1 MEG (CHRISLIN) 08507000005
2 CAGE, CD W/O BP 1160 90100101015
2 BD, BACKPLANE 1160/1170 90100101042
2 BD, PIC LAN 90100101505
2 BD, CPU 15/17/18/1900 90100101499
3 BD, UCOMMS 90100100861
3 BD, DISK CONTROLLER - 1160 90100101148
3 PS, ASY 110V 1170 15/18/1900 90100101659
3 PCB ASY, RLAN 90100102546
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 FINAL ASY * 1465 TERMINAL 8880288
(REV 3 02/18/91)
18-52
EX 1-71
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, 1900 PROCESSOR 90100102966
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, DISTR-BAT B/U 1260 00100220
BD, PWR CONTROL 1260 00100221
BD, SWITCH 1260 00100223
ASSY, PWR TRAY 1260-NO BATTERY! 90100100336
ASSY, PWR TRAY 1261 90100101047
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, CHARGER, ESP BAT 1270V 8882003
UNIT, CHARGER, ESP BAT 1270 90100102690
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, CONSOLE 1330 00100225
ASSY, CRT CONTROL 1330 00100226
CRT ASSY, TUBE W/BD 1330 08001080001
18-53
EX 1-72
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
2 BD, CRT SURGE 1330 90100100026
2 PS, CRT 1330 90100100323
3 UNIT, KEY BD 1330 90100100892
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, RADIO BASE 1370V 8882094
1 UNIT, RADIO BASE 1370 90100102632
1 BD, LAN REMOTE 1370 V 88882045
BD, DIGITAL 1370V 8882052
BD, REGULATOR 1370V 8882060
BD, XCVR 1370V 8882078
BD, RLAN CONTROLLER, VALIDEC 8882086
BD, REGULATOR 1370 90100102552
BD, LAN REMOTE 1370 90100102610
BD, XCVR 1370 90100102612
BD, DIGITAL 1370 90100102614
FNL ASY* RBS ANTENNA 90100102680
UNIT, FIELD STRENGTH METER, ESP 90101202781
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, STANDALONE 1435 90100100128
BD, CONTROLLER 1435 90100100156
BD, PS 1435 90100100303
18-54
EX 1-73
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
BD, TRANSITION 1435 90100100355
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, TERMINAL 1440 90100100368
BD, DISPLAY 2010 00100183
BD, POWER SUPPLY 00100231
BD, TRANSITION 1440/2010 00100232
BD, CONTROLLER 1440 90100100137
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, DISPLAY PED MT 1445 90100101071
UNIT, DISPLAY WALL MT 1445 90100101076
BD, CONTROLLER 1445 90100100967
BD, DISPLAY 1445 90100100969
BD, MOTHER 1445 90100100971
ASY* POST, FAB 90100100963
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT* SATELLITE DISPLAY 1449 90100102367
UNIT, DISPLAY PED MT 1449 90100102379
UNIT, DISPLAY WALL MT 1449 90100102380
BD, DISPLAY 1449 90100102361
DISPLAY CONTROL 1449 90100102363
ASSY, DISPLAY 1449 90100102366
18-55
EX 1-74
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, TERMINAL 1450 90100101218
2 BD, CONTROLLER 1450 90100100957
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, TERMINAL 1460 90100101484
2 BD, CONTROLLER 1460 90100101534
2 BD, COMMS I/O 1460/1460A 90100101537
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, TERMINAL 1460A 90100102495
2 BD, COMMS I/O 1460/1460A 90100101537
2 BD, BROADCAST 1460A 90100102143
2 BD, CONTROLLER 1460A 90100102392
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, BAR INTERFACE 1461 90100102097
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, HHT VALIDEC 1470V 8882029
1 UNIT, ESP REMANCO 1470 [2587A] 90100102979
18-56
EX 1-75
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER 1530 00100233
2 BD, PAPER OUT 1530 00100143
2 MECH, PRINTER EPSON 1530 08040000001
2 BD, DRIVER 1530/1532 90100100083
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER SLIP 1532 90100102073
2 MECH, PRINTER EPSON 1532 08040000285
2 BD, DRIVER 1530/1532 90100100083
2 BD, INTERFACE 1532 90100102056
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER 1540 8880296
2 BD, CONTROLLER 1540 90100101554
2 BD, TRANSITION 1540 90100101557
3 MECH, PRINTER 1540/1540A 08050000000
3 BD, SWITCH 1540 90100101639
3 SENSOR, PAPER 1540 90100101732
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER 1540A 90100101630
2 BD, CONTROLLER 1540A 8880304
2 BD, TRANSITION 1540 90100101557
3 MECH, PRINTER 1540/1540A 08050000000
18-57
EX 1-76
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
3 BD, SWITCH 1540 90100101639
3 SENSOR, PAPER 1540 90100101732
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER 1541 90100102407
2 MECH, PRINTER 1541 08040000287
2 PS, 1541 00070000014
2 BD, INDICATOR / SW 1541 90100102412
2 BD, CONTROLLER 1541 90100102477
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, 1542 SLIP PRINTER, 115VA 08040000085
1 UNIT, PRINTER SLIP 7211 90100101523
3 P.S. PCB 110V 08040000280
3 P.S. PCB 220V 08040000281
3 I/O PCB SERIES 500 08040000282
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, PRINTER SLIP 1545,110V 08040000288
3 UNIT, 1545 SLIP PRNTR, S600, 220V 08040000289
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, PRESET 1710 90100100087
BD, TRANSITION 1710 90100100040
18-58
EX 1-77
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
2 ASSY, MEMB SW 1710 90100101370
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRESET 1720 8880601
2 BD, ASSY 1720/1720A 90100101536
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, PRESET 1720A 90100101493
BD, ASSY 1720/1720A 90100101536
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, CASH DRAWER 1830 00100235
BD, DRIVER 1830 00100236
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, 2010 REMOTE ACCUMULATOR 90100100777
BD, DISPLAY 2010 00100183
BD, POWER SUPPLY 00100231
BD, TRANSITION 1440/2010 00100232
BD, RADATAR 90100100875
(REV 2 12/03/91)
18-59
EX 1-78
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, DC EXTENDER 2110 90100100402
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, AC EXTENDER 2120, 110V 90100101097
1 UNIT, AC EXTENDER 2120, 220V 90100101098
3 PCB* 2120 CABLE EXTENDER 90100100942
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER DX2100 8880411
3 PRINTHEAD* FUJITSU DX2100/2300 8880437
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER DX2300 08040000286
3 PRINTHEAD* FUJITSU DX2100/2300 8880437
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, FILTER BOX 90100101265
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER EPSON FX100 08040000127
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
CRT W/KYBD KT 70 110V 08001000002
UNIT, MONITOR KT7 KIMTRON 8880239
UNIT, MONITOR KT70 KIMTRON 8880247
(REV 2 12/03/91)
18-60
EX 1-79
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
2 UNIT, KEYBOARD KIMTRON 08040000230
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, MODEM GANDALF 24A DIALUP 8880197
1 UNIT, MODEM LDS1 8880205
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER EPSON MX80 08040000005
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER EPSON RX80 08040000069
3 BD, SER INTERFACE 08040000019
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PS SAFT UPS 110V 08070000007
1 UNIT, PS ELGAR UPS 88880270
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, TERM 220 AEST VIS 90100103115
2 ASSY, CD RDR TRK 2 VIS TERM 90100103081
2 BD, CONTROLLER AEST VIS 90100103104
2 BASE, TERM 90501002954
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, TERM 240 FST VIS 90100103099
(REV 2 12/03/90)
18-61
EX 1-80
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
2 BD, CONTROLLER FST VIS 90100103027
BD, TERM VIDEO FST VIS 90100103032
ASSY, INVERTER VIS TERM 240/260 90100103077
ASSY, KEY READER VIS TERM 90100103080
ASSY, CD RDR TRK 2 VIS TERM 90100103081
ASSY, CD RDR TRK 1&2 240/260 90100103106
BASE, TERM 90501002954
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, TERM 260 TST VIS 90100103082
BD, CONTROLLER FST VIS 90100103027
BD, TERM VIDEO FST VIS 90100103032
ASSY, INVERTER VIS TERM 240/260 90100103077
ASSY, KEY READER VIS TERM 90100103080
ASSY, CD RDR TRK 2 VIS TERM 90100103081
ASSY, CD RDR TRK 1&2 240/260 90100103106
SCREEN, TOUCH VIS TERM 260 TST 90301003015
BASE, TERM 90501002954
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, SAT DISPLAY VIS 320 90100103035
BD, CONTROLLER SAT DISPLAY VIS 90100103067
(REV 2 12/03/90)
18-62
EX 1-81
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, SAT DISPLAY DBL VIS 322 90100103189
2 BD, CONTROLLER SAT DISPLAY VIS 90100103203
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, CASH DRAWER MMF VIS 330 08008000008
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, PROCESSOR 4000 VIS 140 90101303071
DRIVE, FLOPPY 3.5 4000 VIS 08505000012
BD, 4MB EXPAN RAM 4000 VIS 08505000015
DRIVE, HD 104MB 3.5" 08505000017
DRIVE, HD 170MEG 3.5" 08505000018
BD, 4 PORT SERIAL 08507000007
PS, PROCESSOR 4000 VIS 8883555
DRIVE, DISK 51/44000 VIS 8883571
BD, CPU 25MHZ VIS 90101303130
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, PRINTER, MEMODYNE VIS 420 08040000303
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, PRINTER, SLIP 290 VIS 421 08040000302
(REV 2 12/03/90)
18-63
EX 1-82
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER IMPACT 267 VIS 422 08040000304
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER AUTOCUTTER VIS 423 08040000305
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER SHARP LAZ VIS 424 00040000307
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER STAR IMPACT VIS 425 08040000308
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, LINE DRIVER 485 VIS 90100103283
2 BD, LINE DRIVER 485 VIS 90100103246
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, TAPE STREAM, ARCH VP2150ES 08503000003
1 UNIT, PROCESSOR 5000 32MHZ 90100103453
1 UNIT, PROCESSOR 5000 25MHZ 90101303168
2 DRIVE, TAPE 150MB MOTOROLA 08503000002
2 DRIVE, HD 170MEG 3.5" 08505000018
2 BD, 4 PORT SERIAL 08507000007
2 BD, CPU 25MHZ VIS 90101303130
2 BD, CPU 32MHZ VIS 90101303454
(REV 2 12/03/90)
18-64
EX 1-83
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROTOCOL CONV UNIX VIS 520 90100102901
2 BD, PROTOCOL CONV UNIX VIS 90100102892
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROTOCOL CONV 1460 VIS 521 90100102912
2 BD, PROTOCOL CONV 1460 VIS 90100102911
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PROTOCOL CONV RLAND VIS 522 90100102894
2 BD, PROTOCOL CONV R-LAN VIS 90100102891
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, WYSE 60 W/KYBD 110V V530 08001000303
1 UNIT, WYSE 60 W/KYBD 220V V530 08001000304
2 CRT* WYSE 60(W/OUT KEYBOARD) 8884744
2 KEYBOARD* WYSE 60 (530) 8884769
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PRINTER EPSON 1050 VIS 542 08040000301
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
1 UNIT, PS UPS 425A VIS 08070000020
1 UNIT, PS UPS 800 VIS 08070000041
(REV 2 12/03/90)
18-65
<PAGE>
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, MODEM GANDALF VIS 7610145
TYP DESCRIPTION PART NUMBER
=== =========================================== ==============
UNIT, MODEM VENTEL 2400-33 V561 08020000012
(REV 2 12/03/90)
18-66
EX 1-85
<PAGE>
LICENSOR SOFTWARE PROGRAMS
OS1500.SYS OLD OPERATING SYSTEM
OS1510.SYS NEW PROTOCOL OPERATING SYSTEM
OS1700.SYS 1700 OPERATING SYSTEM
OS1600.SYS 1600 OPERATING SYSTEM
OS1800.SYS NEW PROTOCOL OPERATING SYSTEM FOR OS 6
SYSLIB.SYS SYSTEM LIBRARY ROUTINES
US.SYS USER SHELL FOR ALL OPERATING SYSTEM
CPMRUN.PGM MANAGEMENT BACK OFFICE USER INTERFACE WITH CP/M
HDSTAT.PGM HARD DISK STATISTICS PROGRAM
HDFORM.PGM USED TO FORMAT THE HARD DISK
BURNIN.PGM DIAGNOSTIC PROGRAM FOR INFORMATION ON SYSTEM CONFIG
UTILIT.PGM UTILITY PROGRAM FOR SYSTEM MAINTENANCE
NODE.PGM DIAGNOSTIC PROGRAM FOR INFORMATION ON SYSTEM NODES.
INIT01.USR USERS OF THE OPERATING SYSTEM
INIT02.USR USERS BY THE OPERATING SYSTEM
HDSTAT.USR USED BY THE HARD DISK STATISTICS PROGRAM
INSTAL.USR USEF FOR THE INSTALLATION OF MANAGEMENT BACK OFFICE
SEGFRM.USR USED FOR FORMATTING THE HARD DISK
HELP.USR HELP INFORMATION FOR THE USER INTERFACE WITH THE O.S.
NODE.USR USED BY THE NODE PROGRAM
RESMAN.PGM FRONT OF THE HOUSE POINT OF SALE PROGRAM
RS.PGM RESMAN SHELL FOR MANAGERS COMMANDS
CONFIG.PGM RESTAURANT MGT. CONFIGURATION FILE MAINTENANCE
BASIC.PGM BASIC PROGRAM, EXECUTE ONLY, INTERPRETER PROGRAM
REBOOT.USR SYSTEM REBOOT INDICATION
MBO.USR CP/M INITIALIZATION FILE
ENDFNC.USR RESTORES CP/M CONTROL AFTER RMS FUNCTION
15BOOT.USR BATCH FILE USED IN CREATING THE RMS 1500 REBOOT DISK
1510BT.USR BATCH FILE USED IN CREATING THE NEW PROTOCOL BOOT DISK
17BOOT.USR BATCH FILED USED IN CREATING THE RMS 1700 REBOOT DISK
BNIT01.USR CRT1 INITIALIZATION FILE FOR REBOOT DISKETTE
BNIT02.USR CRT2 INITIALIZATION FILE FOR REBOOT DISKETTE
BHELP.USR USER INTERFACE HELP INFORMATION WITH MBO SYSTEM
PGMSTA.USR USED TO INVOKE THE STATUS COMMAND
REBOOT.USR SYSTEM REBOOT INDICATION
NOMBO.USR USED TO RUN CP/M WITHOUT THE MGT BACK OFFICE SHELL
NOMBO192.USR
HDSHIP.PGM POSITIONS DISK FOR HARD DISK SHIPPING
PIP.CMD FILE COPY UTILITY PROGRAM
STAT.CMD DIRECTORY UTILITY STATUS FOR FILES/PROGRAMS
TORMS.CMD FILE COPY FROM CP/M TO RMS FORMAT
FROMRMS.CMD FILE COPY FROM ROM TO CP/M FORMAT
COPYDISK.CMD CP/M86 FULL DISK COPY UTILITY
FORMAT.CMD CP/M86 DISKETTE FORMAT UTILITY
SUBMIT.CMD INSTALLATION UTILITY
BACKUP.CMD DISK BACKUP AND RESTORE UTILITY
ED.CMD CP/M86 EDITOR
RMSCOPY.CMD CREATES THE CP/M86 OPERATING SYSTEM
18-67
EX 1-86
<PAGE>
ENDCPM.CMD EXIT CP/M86 OPERATING SYSTEM
HELP.CMD HELP UTILITY
HELP.HLP USED BY THE HELP COMMAND
PFK.KEY USED BY THE PFK COMMAND
SAVEFILE.REN SAVES MEN/PER/CON FILES TO THE NEW NAME
MENU.CMD DISPLAYS*. MNU SELECTION FILE
REMSFORM.CMD FORMATS/CREATES THE RESTAURANT MGT JOURNAL DISK
RMSISSUE.CMD ISSUES RMS COMMANDS FROM CP/M
EODCTRN.CMD CONFIGURATION FILE TRANSFER PROGRAM
EODPTRN.CMD PERSONNEL FILE TRANSFER PROGRAM
EODMTRN.CMD MENU FILE TRANSFER PROGRAM
CHKPROC.CMD CHECK SUMMARY/DETAIL RECREATION PROCESSOR
EXCEPT.CMD EXCEPTIONS PROCESSOR
PULSE.CMD RESTAURANT SALES STATISTICS PROCESSOR
MANPULSE.CMD OPTIONS SETUP/MAINTENANCE FOR PULSE REPORTING
RECAP.CMD RECAP OF THE SERVER STATISTICS PROCESSOR
SERVST.CMD SERVER STATISTICS PROCESSOR
TIPS.CMD SERVER TIPS REPORTING PROCESSOR
TIPACCUM.CMD SERVER TIPS ACCUMULATION PROGRAM
TIPMAINT.CMD SERVER TIPS MAINTENANCE PROGRAM FOR TIPS REPORTING
RECON.CMD SERVER ANALYSIS PROCESSOR
RECACCUM.CMD SERVER ANALYSIS ACCUMULATOR PROGRAM
RECMAINT.CMD SERVER ANALYSIS MAINTENANCE PROGRAM
MBO.CTL MGT BACK OFFICE CONTROL FILE
MBO1.CTL MGT BACK OFFICE BACKUP CONTROL FILE
EODACUM.CMD END OF DAY ACCUMULATION PROGRAM
EODRMS.CMD END OF DAY PROCESSOR
EODSETUP.CMD EOD OF DAY MAINTENANCE / SETUP PROCESSOR
EODPRINT.CMD END OF DAY PRINT ROUTINES
YESREPS.MNU YESTERDAYS REPORTS MENU
CSHMAINT.MNU CASH ITEM MAINTENANCE MENU
PREVIS.MNU PREVIOUS REPORTING MENU
AUDIT.CMD NIGHT AUDIT PROCESSOR
TIMECARD.CMD TIMECARD PROCESSOR/MAINTENANCE
CRFORM.CMD TIMECARD FORMAT FILE MAINTENANCE
SYSUTIL.CMD TIMECARD SYSTEM UTILITIES
SCRESET.CMD MANAGERS CONSOLE INITIALIZATION RESET
INSTALL.SUB USED WHEN INSTALLING THE MANAGEMENT BACK OFFICE
RESETDSK.CMD CP/M DISKETTE RESET UTILITY
RMSDIR.CMD READS THE RMS DIRECTORY FROM CP/M
RMSISSUE.CMD MEN/PER/CON CONFIGURATION CHANGE PROGRAM
MBO.CMD CONTROL PROGRAM FOR THE MGT BACK OFFICE SYSTEM
MBOTREE.CMD INFORMATION ON PROGRAMS USED IN THE MBO SYSTEM
MBOPASS.CMD USER AND PASSWORD UPDATE PROCESSOR
EVENT.CMD EVENT SCHEDULER FOR THE RESTAURANT MGT PROGRAM
MBOGEN.CMD MGT BACK OFFICE GENERATION
MBOWAIT.CMD MGT BACK OFFICE GENERAL WAIT ROUTINES
MBOLOG.CMD MGT BACK OFFICE SYSTEM LOG DATE
MGRCON.USR (US01) SELECTS RESTAURANT MGT OPERATIONAL MENU
PROMPT.CMD DISKETTE UTILITIES PROMPT ROUTINES
BRESMAN.CMD OPEN RESTAURANT MGT BACK OFFICE PROGRAM
ERESMAN.CMD CLOSE RESTAURANT MGT BACK OFFICE PROGRAM
CONFIG.USR SELECTS CONFIGURATION HELP SCREEN (US07)
18-68
EX 1-87
<PAGE>
BASIC.USR SELECTS BASIC HELP SCREEN (US06)
DATETIME.CMD SYSTEM DATE AND TIME VALIDATION
DELETE.CMD RMS/CP/M FILE DISKETTE UTILITY
RENAME.CMD RMS/CP/M RENAME UTILITY
RMSRUN.CMD RMS PROGRAM STARTER (ISSUES O.S. RUN)
COMPACT.CMD RESTORES SPLIT JOURNAL FILES
ACTUTIL.MNU CONFIGURATION CHANGES SELECTION SCREEN
CONSTUTIL.MNU RMS/CE DIAGNOSTICS SELECTION SCREEN
ERESMAN.MNU CLOSE RESTAURANT MANAGEMENT SELECTION SCREEN
MAINUTIL.MNU OPERATIONAL UTILITIES SELECTION SCREEN
MBOUTIL.MNU MGT BACK OFFICE UTILITIES SELECTION SCREEN
TIPMAINT.MNU TIPS/RECON MAINTENACNE SELECTION SCREEN
RENFILE.REN RENAMES MEN/PER/CON FILES
CUSTUTIL.USR SELECTS SYSTEM DIAGNOSTICS MENU (US09)
CEXW01.BAS BASIC CHAIN PRINTER PROCESSOR
CPACUM.BAS BASIC CHAIN ACCUMULATOR PROCESSOR
CCASH.BAS BASIC CHAIN CASH PROCESSOR
CEXCEPT.BAS BASIC CHAIN EXCEPTIONS PROCESSOR
CTIPS.BAS BASIC CHAIN TIPS PROCESSOR
CPREF.BAS BASIC CHAIN PREFERENCE PROCESSOR
CCPROC.BAS BASIC CHAIN PROCESSOR
CHAIN.BAS BASIC CHAIN
BASIC.PGM BASIC PROGRAM EXECUTE ONLY INTERPRETER PROGRAM
OPTION.BAS BASIC OPTION FILE
CASH.BAS BASIC CASH PROCESSOR
PROC13.BAS BASIC PROCESSOR PRINT ROUTINE
CREATE.BAS BASIC CREATE PROCESSOR
CHKSUM.BAS BASIC CHECK SUMMARY/DETAIL PROCESSOR
TIPS.BAS BASIC TIPS PROCESSOR
PREFER.BAS BASIC PREFERENCE PROCESSOR
CPL116.BAS BASIC PRINT ROUTINE
ACUM10.BAS BASIC ACCUMULATE PROCESSOR
TRMF10.BAS
SERVST.BAS BASIC SERVER STATISTICS PROCESSOR
PRSORT.BAS BASIC PREFERENCE SORT PROCESSOR
EXL.108.BAS BASIC PRINT ROUTINE PROCESSOR FOR RELEASE 8
HISTRY.BAS BASIC SYSTEM DIAGNOSTICS PROCESSOR
LCOST.BAS BASIC LABOR COST PROCESSOR
EXL15.BAS BASIC EXCEPTIONS LIBRARY PROCESSOR
ACUM22.BAS BASIC ACCUMULATION PROCESSOR
TRMF21.BAS
CPL173.BAS
ATTEND.BAS BASIC TIMECARD RECORD PROCESSOR
CHNOPT.BAS BASIC CHAIN OPTION PROCESSOR
PRC0B.BAS BASIC NO PRINT CUSTOM PROCESSOR
PRFPPRO.BAS BASIC NO PRINT PROCESSOR
PRFPRPT.BAS BASIC NO PRINT
PRFACC.BAS BASIC NO PRINT ACCUMULATE PROCESSOR
PROC25.BAS
HARDEX.BAS BASIC HARD DISK SYSTEM DIAGNOSTICS PROCESSOR
CCNTRL.BAS CASH GENERATOR CONTROL PROCESSOR
CINIT.BAS CASH GENERATOR INITIALIZATION
CFORM.BAS CASH GENERATOR CUSTOM PRINT PROCESSOR
18-69
EX 1-88
<PAGE>
CPROC.BAS CASH GENERATOR PROCESSOR
CUTIL.BAS CASH GENERATOR UTILITIES
CPRINT.BAS CASH GENERATOR PRINT PROCESSOR
CMERGE.BAS CASH GENERATOR ACCUMULATION PROCESSOR
CCMENU.BAS CASH GENERATOR MENU FILE COPY UTILITY
CCHANG.BAS CASH GENNERATOR UTILITIES CHANGE
ICNTRL.BAS ITEM GENERATOR CONTROL PROCESSOR
IINIT.BAS ITEM GENERATOR INITIALIZATION
IFORM.BAS ITEM GENRATOR CUSTOM PRINT PROCESSOR
IUTIL.BAS ITEM GENERATOR UTILITIES
IPRINT.BAS ITEM GENERATOR PRINT PROCESSOR
IMERGE.BAS ITEM GENERATOR ACCUMULATION PROCESSOR
ICMENU.BAS ITEM GENERATOR MENU FILE COPY UTILITY
ICHANG.BAS ITEM GENERATOR UTILITIES CHANGE
LCNTRL.BAS LABOR GENERATOR INITIALIZATION
LINIT.BAS LABOR GENERATOR INITIALIZATON
LFORM.BAS LABOR GENERATOR CUSTOM PRINT PROCESSOR
LPROC.BAS LABOR GENERATOR PROCESSOR
LUTIL.BAS LABOR GENERATOR UTILITIES
LPRINT.BAS LABOR GENERATOR PRINT PROCESSOR
LDPRIN.BAS LABOR GENERATOR DAILY PRINT PROCESSOR
LMERGE.BAS LABOR GENERATOR ACUMULATION PROCESSOR
LCMENU.BAS LABOR GENERATOR MENU FILE COPY UTILITY
LCHANG.BAS LABOR GENERATOR UTILITIES CHANGE
HMSTSK.PGM SUB TASK FOR HMS/RMS LINK
INRMSH.USR HMS OPTION INSTALLATION UTILITY FILE
PMSTSK.PGM LINKDRIVER FOR THE PMSI
INPMST.USR PMS OPTION INSTALLATION UTILITY FILE
LNKDRV.PGM LINKDRIVER FOR THE PMSI
AUDTSK.PGM AUDITOR SUBTASK
INAUD.USR AUDITOR OPTION INSTALLATION UTILITY FILE
TATTSK.PGM RESTAURANT MGT TIME AND ATTENDANCE SUBTASK
INTIME.USR TIME AND ATTENDANCE INSTALLATION UTILITY FILE
HHT.PGM ALLOWS THE USER TO DEFINE EMPLOYEES TO ESP'S
RLAN.USR SUB TASK PROGRAM USED BY THE INTERNAL RLAND CARD
HHTRBS.USR SUB TASK FILE CREATED BY THE HHT PROGRAM
INRLAN.USR ESP OPTION INSTALLATION UTILITY FILE
RLAN.PGM COMMUNICATION PROGRAM WITH THE OPERATING SYSTEM
MBOLOCK.CMD MSR UTILITIES USED TO UNLOCK/LOCK MASTER FUNCTIONS
LNKTST.PGM DIAGNOSTICS FOR COMMUNICATIONS SELECTION
BURNIN.PGM DIAGNOSTICS FOR INFORMATION ON THE SYSTEM
RAMTST.PGM DIAGNOSTICS FOR INFORMATION ON SYSTEM MEMORY
NODE.USR SUB TASK FOR NODE PROGRAM
NODE.PGM DIAGNOSTICS FOR SYSTEM NODE INFORMATION
HDTEST.PGM DIAGNOSTICS FOR INFORMATION ON THE HARD DISK
SYSCOM.SYS SUB TASK FOR LINK COMMUNICATIONS
RPT8GEN.BAS BASIC RECON RELEASE8 GENERATOR PROCESSOR
RRP8GEN.BAS BASIC RECON RELEASE8 REPORT GENERATOR
RECON.BAS BASIC RECON PROCESSOR
RCON8E.BAS BASIC RECON RELEASE8 GENERATOR CONFIGURATION UTILITY
RPT8EE.BAS BASIC RECON RELEASE8 REPORT PROCESSOR
RACM8D.BAS BASIC RECON RELEASE8 ACCUMULATOR PROCESSOR
18-70
EX 1-89
<PAGE>
RADD8D.BAS BASIC RECON RELEASE8 GENERATOR MERGE UTILITY RDEF81.BAS BASIC RECON
RELEASE8 GENERATOR UTILITIES RPRO8G.BAS BASIC RECON RELEASE8 GENERATOR PRINT
PROCESSOR TURNS.BAS BASIC TABLE TURNS PROCESSOR RDEF9A.BAS BASIC RECON RELEASE9
REPORT GENERATOR RPROC9C.BAS BASIC RECON RELEASE9 REPORT GENERATOR RCON9A.BAS
BASIC RECON RELEASE9 GENERATOR CONFIGURATION UTILITY RPTE9B.BAS BASIC RECON
RELEASE9 REPORT PROCESSOR RADD9A.BAS BASIC RECON RELEASE9 GENERATOR MERGE
UTILITY RPTG9B.BAS BASIC RECON RELEASE9 GENERATOR PROCESSOR RACM9A.BAS BASIC
RECON RELEASE9 ACCUMULATOR PROCESSOR RRPE9B.BAS BASIC RECON RELEASE9 HOTLRG.PGM
RESTAURANT MGT PROGRAM FOR HOTEL 512K+ RESLRG.PGM RESTAURANT MGT PROGRAM 512K+
RESMED.PGM RESTAURANT MGT PROGRAM 256K HOTMED.PGM RESTAURANT MGT PROGRAM FOR
HOTEL 256K+ RESSML.PGM RESTAURANT MGT PROGRAM 128K RESHOT.PGM RESTAURANT MGT
PROGRAM WITH HMS INTERFACE RESLRG.PGM RESTAURANT MGT PROGRAM 512K DELPER.CMD
COMMAND FILE THAT DELETES THE PERSONNEL FILE TACACUM.CMD TAX REPORT ACCUMULATOR
PROCESSOR TAXREP.CMD TAX REPORT PROCESSOR TAXPRINT.CMD TAX REPORT PRINT PROCSSOR
TURMAINT.CMD TABLE TABLE TURNS REPORT MAINTENANCE PROCESSOR TURNS.CMD TABLE
TURNS REPORT PROCESSOR STAFTRAK.CMD STAFTRAK LABOR REPORT PROCESSOR L11PCS.CMD
STAFTRAK UTILITIES FOR RELEASE 11 L12PCS.CMD STAFTRAK REPORT/PRINT MENU FOR
RELEASE 11 L13PCS.CMD STAFTRAK FULL SCHEDULE PRINT FOR RELEASE 11 L14PCS.CMD
STAFTRAK PRINT EMPLOYEE SUMMARY FOR RELEASE 11 L01PCS.CMD STAFTRAK UTILITIES FOR
RELEASE 10 L02PCS.CMD STAFTRAK REPORT/PRINT MENU FOR RELEASE 10 L03PCS.CMD
STAFTRAK FULL SCHEDULE PRINT FOR RELEASE 10 L04PCS.CMD STAFTRAK PRINT EMPLOYEE
SUMMARY FOR RELEASE 10 ASCOM.CMD COMMUNICATION SUB TASK BICOM.CMD COMMUNICATION
SUB TASK PRORMS.COD CLUB.CMD CUSTOM COMMUNICATION INTERFACE PACKAGE RESMAN.PGM
RESTAURANT MGT PROGRAM INTERFACE WITH THE CLUB.CMD CONFIG.PRM CONFIGURATION
UTILITIES INTERFACE WITH CLUB COMMAND QUEMED.PGM FRENCH RESTAURANT MGT PROGRAM
QUMHOT.PGM FRENCH RESTAURANT MGT PROGRAM WITH HMS INTERFACE QUELRG.PGM FRENCH
RESTAURANT MGT PROGRAM 512K+ QULHOT.PGM FRENCH RESTAURANT MGT PROGRAM QUERAD.PGM
FRENCH RESTAURANT MGT PROGRAM WITH ESP'S BCSMED.PGM BCMIIOT.PGM BCSLRG.PGM
BCLHOT.PGM STASMAN.CMD
18-71
EX 1-90
<PAGE>
INVENT.CMD INVENTORY PROGRAM PROCESSOR INVENT.001 SUB TAKS ROUTINES OF THE
INVENT COMMAND INVENT.002 SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.003 SUB
TAKS ROUTINES OF THE INVENT COMMAND INVENT.004 SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.005 SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.006 SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.008 SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.009 SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.00A SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.00B SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.00C SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.00D SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.00E SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.00F SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.011 SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.012 SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.013 SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.014 SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.015 SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.016 SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.017 SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.018 SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.018 SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.019 SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.01A SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.01B SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.01C SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.01D SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.01E SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.01F SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.020 SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.021 SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.022 SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.023 SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.024 SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.025 SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.027 SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.028 SUB TAKS ROUTINES OF THE INVENT COMMAND INVENT.029 SUB TAKS
ROUTINES OF THE INVENT COMMAND INVENT.02A SUB TAKS ROUTINES OF THE INVENT
COMMAND INVENT.02B SUB TAKS ROUTINES OF THE INVENT COMMAND SCHREP.CMD LABOR
SCHEDULING PROCESSOR SCHMAINT.CMD LABOR SCHEDULING MAINTENANCE UTILITY LABOR.CMD
LABOR PRODUCTIVITY PROCESSOR LABACCUM.CMD LABOR PRODUCTIVITY ACCUMULATION
PROCESSOR LABMAINT.CMD LABOR PRODUCTIVITY MAINTENANCE UTILITY LABPRINT.CMD LABOR
PRODUCTIVITY PRINT UTILITY LABOR.001 LABOR PRODUCTIVITY SUB TASK LABOR.002 LABOR
PRODUCTIVITY SUB TASK LABOR.003 LABOR PRODUCTIVITY SUB TASK DSCR.CMD DAILY SALES
AND CASH PRINT/PROCESSOR DSCMAINT.CMD DAILY SALES AND CASH MAINTENANCE UTILITY
18-72
EX 1-91
<PAGE>
PUNCTUAL.CMD LABOR PUNCTUALITY PRINT PROCESSOR
PUNMAINT.CMD LABOR PUNCTUALITY MAINTENANCE UTILITY
PPREVIS.MNU PERKINS PREVIOUS REPORTS MENU
PMAINT.MNU PERKINS CUSTOM MAINTENANCE MANUS
PYESREP.MNU PERKINS PRINT YESTERDAYS REPORTS MENUS
CHAIN.PGM CHAIN ACCUMULATOR PROGRAM
SERIAL.CMD CUSTOM SERIALIZATION PROGRAM
SERIAL.INF CUSTOM SERIALIZATION STOREAGE FILE
MBO.MNU CUSTOME MBO HALF SHELL MENU SCREEN
*MANY OF THESE PROGRAMS HAVE BEEN RELEASED IN MULTIPLE VERSIONS. ALL OF
WHICH ARE INCLUDED AS LICENSOR SOFTWARE**
18-73
EX 1-92
<PAGE>
VISION ADVANTAGE SOFTWARE
90008303662 TAPE 2.1 INTERNATIONAL
90008304046 TAPE* 1993 TIMEBOMB EXTENSION
90008304089 TAPE* 1993 TIMEBOMB EXTENSION
90008303614 TAPE*2.0.0 FSCK OVERLAY
90008303616 TAPE*2.0.0 PREP OVERLAY
90008403605 TAPE*2.0.8 SOURCE
90008303631 TAPE* 2.1.0 RELEASE
90008303755 TAPE* 2.5 INTO
90008303742 TAPE 2.5.0.0.2 SECURITY OVLY
90008303743 TAPE* 2.5.0.0.2 SEC.ADD-ON OVL
90008303741 TAPE* 2.5.0.0M MFG SEC.OVLY
90008303796 TAPE* 2.5.1 OVERLAY
90008304091 TAPE* 2.5.1.2 PBT SLIP PTR OVL
90008303976 TAPE* 2.5.1.3 OVERLAY
90008303770 TAPE* 2.5 V44.2 UPDATE
90008303794 TAPE* 2.5V44.2 PR-CHECK
90008303769 TAPE* 2.X REMV FOREIGN DOWNLDS
90008304087 TAPE* 3.0 GERMAN OVERLAY 68K
90008304088 TAPE* 3.0 GERMAN OVLY (88K)
90008304047 TAPE* 30INTO INT'L OVLY, 68K
90008304048 TAPE* 30INTO INT'L OVLY, 88K
90008304027 TAPE* R32V3.1 UNIX, RUNTIME
90008303842 TAPE* BURNOMATIC
90008303963 TAPE* CABBLEBARON'S SPECIAL
90108203286 TAPE* COPYTAPE & CHECKSUM
90102602890 TAPE* DRL, 1460/UNIX P/C PWB
90008303965 TAPE* FUJITSU 172&135MB DISK
9008203209 TAPE* FULL RF UNIX INSTAL'N
90008303964 TAPE* FULL UNIX R3V5
90008303981 TAPE* FULL UNIX UPDATE OVERLAY
90008304009 TAPE* GERMAN SCREENS V2.5.5
90008303771 TAPE* INT'L CREDIT AUTH SYSTEM
90008303860 TAPE* INTL OVERLAY 2.5INT4
90008304018 TAPE* MFG SECURITY OVL 2.0,88K
90008304017 TAPE* MFG SECURITY OVL, 3.0,68K
90008303634 TAPE* MLINK 2.1 (DEVELOPMENT)
90008303659 TAPE* MLINK 2.1 (RUNTIME)
90008304062 TAPE* MLINK DEVELOPMENT SYS 88K
90008303975 TAPE*MLINK MAKE POLL MGR 88K
90008303974 TAPE* MLINK RUNTIME SYS 88K
90008303987 TAPE* MLINK SERIALIZATION 88K
90008203231 TAPE* O'LAY R 1.5.3.3
90008203229 TAPE* O'LAY R 1.5.3.2
90008203232 TAPE* O'LAY R1.5.3.4
90008203294 TAPE* O'LAY R1.5.3.8
90008203334 TAPE* OVERLAY 1.5.3.9
90008203420 TAPE* OVERLAY 1.5.5.4 INT
18-74
EX 1-93
<PAGE>
90008203419 TAPE* OVERLAY 1.5.5.5
90008203428 TAPE* OVERLAY 1.5.5.6 INT
90008203421 TAPE* OVERLAY 1.5.6.2 INT
90008203429 TAPE* OVERLAY 1.5.6.3 INT
90008303712 TAPE* OVERLAY 2.1 INT 2
90008203263 TAPE* OVERLAY R 1.5.4.2
90008203233 TAPE* OVERLAY R1.5.3.5
90008203250 TAPE* OVERLAY R1.5.3.6
90008203267 TAPE* OVERLAY R1.5.3.7
90008203249 TAPE* OVERLAY R1.5.4
90008203256 TAPE* OVERLAY R1.5.4.1
90008303744 TAPE* PASSWORD GENERATOR
90008203279 TAPE* PMSI EMULATOR V11.04
90100104066 TAPE* POLL MGR 88K, 100-499 SIT
90100104065 TAPE* POLLMGR 88K, 50-99 SITES
90008303747 TAPE* POLLING MGR 2.1, 1-9 SITE
90008303748 TAPE* POLLING MGR 2.1, 10-49
90008303750 TAPE* POLLING MGR 1.2,100-499
90008303749 TAPE* POLLING MGR 2.1,50-99 SI
90100104063 TAPE* POLLING MGR 88K, 1-9 SITE
90100104064 TAPE* POLLING MGR 88K, 10-49 SI
90008203222 TAPE* R 1.5.3.1 O'LAY
90008203221 TAPE* REL 1.5.1 DB O'LAY
90008203183 TAPE* RFUNIX INSTAL PROCEDURE
90008304015 TAPE* SECURITY TOOLS 3.0.T.68K
90008304016 TAPE* SECURITY TOOLS 3.0.5.88K
90008304008 TAPE* SERIAL 88 2.0.0.0.S.88K
90008404089 TAPE* SOURCE 1993 TIMEBOMB EXT
90008403616 TAPE* SOURCE 2.0.0PREP92 OVLY
90008403631 TAPE* SOURCE 2.1.0
90008403741 TAPE* SOURCE 2.5.0.0.M
90008403796 TAPE* SOURCE 2.5.1 OVERLAY
90008404091 TAPE* SOURCE 2.5.1.2 PBT SLIP
90008403770 TAPE* SOURCE 2.5V44.2 UPDATE
90008403769 TAPE* SOURCE 2.X REMV FOR DWNL
90008403963 TAPE* SOURCE CATTLEBARON'S SPE
90008403981 TAPE* SOURCE FULL UNIX UPDATE
90008403659 TAPE* SOURCE MLINK
90008403634 TAPE* SOURCE MLINK 2.1 DEVLPMT
90008403655 TAPE* SOURCE MLINK 2.1 SERIAL
90008403744 TAPE* SOURCE PASSWORD GENERATO
90008403685 TAPE* SOURCE POLL.MGR 2.1 MAKE
90008403660 TAPE* SOURCE POLLING MGR
90008103710 TAPE* SOURCE UPGR FUJI 107-130
90008404001 TAPE* SOURCE VIS KERNEL GEN &
90008403714 TAPE* SOURCE VISION 2.5
90008404071 TAPE* SOURCE VISION 3.0 FOREIG
90008403751 TAPE* SOURCE WIZCOM CREDIT AUT
90008403976 TAPE* SOURCE, 2.1.1.3 OVERLAY
90008403794 TAPE* SOURCE, 2.5V44.2 PR-CHCK
90008404087 TAPE* SOURCE, 3.0 GERMAN OV 68K
18-75
EX 1-94
<PAGE>
90008404088 TAPE* SOURCE, 3.0 GERMAN OV 88K
90008403955 TAPE* SOURCE, NETWORK KERNEL OV
90008403887 TAPE* SOURCE, VISION 2.5.5
90008303556 TAPE* UNIX
90008203414 TAPE* UNIX TO FULL UNIX UPGRD
90008303710 TAPE* UPGR FUJI 107 TO 130 MB
90008303520 TAPE* VISION 2.0 SW
90008303536 TAPE* VISION 2.0.1
90008303714 TAPE* VISION 2.5
90008303887 TAPE* VISION 2.5.5
9000830471 TAPE* VISION 3.0 FOREIGH LANG.
90008304001 TAPE* VISION KERNEL GEN. & INSTL
90008304067 TAPE* VISION MULTI-AUTH 68K
90008304068 TAPE* VISION MULTI-AUTH 88K
90008203225 TAPE* VISION O'LAY R1.5.3 UPP
90008203302 TAPE* VISION OVERLAY 1.5.5
90008203316 TAPE* VISION OVERLAY 1.5.5.1
90008203365 TAPE* VISION OVERLAY 1.5.5.2
90008203366 TAPE* VISION OVERLAY 1.5.5.3
90008304069 TAPE* VISION REL 3.0 FOR 68K
90008304070 TAPE* VISION REL 3.0 FOR 88K
90008203220 TAPE* VISION REL R1.5.3
90008203255 TAPE* VISION SW 1.5.1
90008303954 TAPE* VISSTOCK
90008303751 TAPE* WIZCOM CREDIT AUTH.
90008403557 TAPE*2.0.4 SOURCE CODE
90008303955 TAPE* NETWORK KERNEL OVERLAY
90008303993 TAPE* VISION 2.5.1.4 RELEASE
90008203689 DISK POLLING MGR 100+
90008203554 DISK* 1.5.5.7 OVRLY
90008203547 DISK* 2.0 INT2
90008203622 DISK* 2.0 INT3 OVERLAY
90008203614 DISK* 2.0.0 FSCK OVERLAY
90008203616 DISK* 2.0.0.PREP OVERLAY
90008203555 DISK* 2.0.1.1 OVRLY
90008203557 DISK* 2.0.4
90008203605 DISK* 2.0.8
90008203719 DISK* 2.1 RELIABILITY UPDATE 1
90008203720 DISK* 2.1 RELIABILITY UPDATE 2
90008203631 DISK* 2.1.0 RELEASE
90008203517 DISK* MFG BURN OVRLY
90008203515 DISK* MFG SEC IBM
90008203539 DISK* MLINK
90008203506 DISK* MLINK
90008203659 DISK* MLINK (RUNTIME)
90008203634 DISK* MLINK 2.1 DEVELOPMENT
90008203655 DISK* MLINK 2.1 SERIALIZER
90008203426 DISK* OVERLAY 1.5.5.6
90008203712 DISK* OVERLAY 2.1 INT 2
90008203685 DISK* POLL.MGR 2.1 MAKER
90008203540 DISK* POLLING
18-76
EX 1-95
<PAGE>
90008203660 DISK* POLLING MGR.SERIAL
90008203717 DISK* RELEASE 2.0.8 UPDATES
90008203716 DISK* RELEASE 2.1 UPDATE
90008203718 DISK* RELEASE 2.1.DB
90002502893 DISK* RLAN NETWORK PRO CONV
90008203633 DISK* SECURITY OVLY
90008203632 DISK* SECURITY OVLY (MANF)
90008203519 DISK* SECURITY OVRLY
90008203536 DISK* VISION 2.0.1
90008203635 DISK* VISION POLLING MGR
90008203520 DISK* VISION SW 2.0
90008203751 DISK* WIZCOM CREDIT AUTH
90008203686 DISK* POLLING MGR
90008203687 DISK* POLLING MGR
90008203688 DISK* POLLING MGR 50-
18-77
EX 1-96
<PAGE>
EXHIBIT D
PARTS
Attached hereto as pages 19-1 through 19-7 is the Contracted Service Part Count
Report and as pages 19-8 through 19-12 is the Service Inventory Summary Report
listing the parts inventory as of October 2, 1995 and October 5, 1995
respectively.
19
EX 1-97
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN
PORTIONS OF THIS DOCUMENT.
02-OCT-95 05:52 PM PART COUNT PAGE 1
CONTRACTED SERVICE PART COUNT
Data definition (BOMUNITSITSTY)
===========================================================================
1200F 1200 Control Group (Floppy)
TOTAL [**]
1200HD 1200 Control Group (Hard Drive)
TOTAL [**]
1270 Battery Charger
TOTAL [**]
1370R Radio Base Station
TOTAL [**]
1435 Stand Alone Controller
TOTAL [**]
1435S SPARE*RMS CONTROLLER
TOTAL [**]
1440 1440 Terminal
TOTAL [**]
1445 1445 Satellite Display
TOTAL [**]
1446 1446 Satellite Display
TOTAL [**]
1449 1449 Satellite Display
TOTAL [**]
1450 1450 Terminal
TOTAL [**]
1450S SPARE*RMS TERMINAL
TOTAL [**]
1460A 1460A Terminal
TOTAL [**]
1460MK 1460A Migration Kit
TOTAL [**]
1460T 1460 Terminal
TOTAL [**]
1470 1470 ESP Terminal
TOTAL [**]
1470V Validec Hand Held Terminal
TOTAL [**]
1500F 1500 Control Group (Floppy)
19-1
EX 1-98
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
=============================================================================
02-OCT-95 05:52 PM PART COUNT PAGE 2
CONTRACTED SERVICE PART COUNT
Data definition (BOMUNITSITSTY)
==============================================================================
1500HD 1500 Control Group (Hard Drive)
TOTAL [**]
150TD 150 MB External Tape D rive
TOTAL [**]
1530 1530 Impact Printer
TOTAL [**]
1530S SPARE&RMS 1530 PRINTER
TOTAL [**]
1532 1532 Slip Printer
TOTAL [**]
1540A 1540 Terminal Printer
TOTAL [**]
1540P 1540 Thermal Printer
TOTAL [**]
1541P 1541 Impact Printer
TOTAL [**]
1545 1545 Slip Printer
TOTAL [**]
1600F 1600 Control Group (Floppy)
TOTAL [**]
1600HD 1600 Control Group (Hard Drive)
TOTAL [**]
1700F 1700 Control Group (Floppy)
TOTAL [**]
170)HD 1700 Control Group (Hard Drive)
TOTAL [**]
1710 1710 Preset
TOTAL [**]
1720 1720 Preset
TOTAL [**]
1720A 1720A Preset
TOTAL [**]
1750HD 1750 Control Group (Hard Drive)
TOTAL [**]
180016 1800 Control Group (9-16 Nodes)
TOTAL [**]
19-2
EX 1-99
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
==============================================================================
02-OCT-95 05:52 PM PART COUNT PAGE 3
CONTRACTED SERVICE PART COUNT
Data definition (BOMUNITSITSTY)
==============================================================================
18008 1800 Control Group (108 Nodes)
TOTAL [**]
1830 1830 Cash Drawer
TOTAL [**]
1840A 1840 Cash Drawer
TOTAL [**]
1840C 1840 Cash Drawer
TOTAL [**]
190016 1900 Control Group (9-16 Nodes)
TOTAL [**]
190024 1900 Control Group (17+ Nodes)
TOTAL [**]
19008 1900 Control Group (1-8 Nodes)
TOTAL [**]
1GBHD 1 BG HARD DRIVE
TOTAL [**]
2110 Cable Extender
TOTAL [**]
2120 Cable Extender
TOTAL [**]
220 Alpha Entry Terminal
TOTAL [**]
220E Alpha Entry Terminal Series II
TOTAL [**]
240 Full Screen Terminal
TOTAL [**]
260 Touch Screen Terminal
TOTAL [**]
260E TOUCHSCREEN TERMINAL SERIES II
TOTAL [**]
260S SPARE TOUCH SCREEN TERMINAL
TOTAL [**]
261 Magnetic Stripe Reader
TOTAL [**]
267 Vision Impact Journal Printer
TOTAL [**]
19-3
EX 1-100
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
==============================================================================
02-OCT-95 05:52 PM PART COUNT PAGE 4
CONTRACTED SERVICE PART COUNT
Data definition (BOMUNITSITSTY)
==============================================================================
267AR Remote Autocut Printer
TOTAL [**]
267E IMPACT CHECK PRINTER SER. II
TOTAL [**]
267EA AUTOCUT CHECK PRINTER SER. II
TOTAL [**]
267ER REMOTE IMPACT PRINTER SER. II
TOTAL [**]
267ERA REMOTE AUTOCUT PRINTER SER. II
TOTAL [**]
267R Remote Impact Printer
TOTAL [**]
2811E 8 PORT SERIAL EXTENSION KIT
TOTAL [**]
290E SLIP CHECK PRINTER SER. II
TOTAL [**]
300B IMPACT AUTOCUT PTR EPSON 300B
TOTAL [**]
300BR REM IMR AUTOCUT PTR EPSON 300B
TOTAL [**]
300BS SPARE IMPACT AUTOCUT (EP200B)
TOTAL [**]
300D IMPACT CHECK PRINTER EPSON 300
TOTAL [**]
300DR REMOTE IMPACT PRINTER (300D)
TOTAL [**]
3200 Vision Single Sided Display
TOTAL [**]
322ED DOUBLE SIDED SATELLITE SER. II
TOTAL [**]
330 Vision Cash Drawer
TOTAL [**]
4000H Vision 4000 (Hotel)
TOTAL [**]
4000R Vision 4000 (Restaurant)
TOTAL [**]
19-4
EX 1-101
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
============================================================================
02-OCT-95 05:52 PM PART COUNT PAGE 5
CONTRACTED SERVICE PART COUNT
Data definition (BOMUNITSITSTY)
=============================================================================
4000H COMPAQ 486 PROC. GRP./HO HD
TOTAL [**]
426E THERMAL CHECK PRINTER SER. II
TOTAL [**]
426R Remote Thermal Printer
TOTAL [**]
485C Line Driver Card
TOTAL [**]
485CC RS 485 Card Cage
TOTAL [**]
485CF RS 485 Card Frame
TOTAL [**]
485SA Network Line Driver
TOTAL [**]
485T Line Driver Tower (Card Cage)
TOTAL [**]
5000H Vision 5000 (Hotel)
TOTAL [**]
500H COMPAQ PENTIUM PROC. GRP/HO HD
TOTAL [**]
521 Current Loop PLV
TOTAL [**]
523 Addition Network UNIX Adaptor
523ER REMOTE NETWORK KIT
TOTAL [**]
524PC 524 Protocol Converter
TOTAL [**]
525HD 525 MB EXTERNAL HARD DRIVE
TOTAL [**]
530 Additional Managers' Console
530ER REMOTE WORKSTATION KIT
TOTAL [**]
5356 REMOTE NETWORK KIT
TOTAL [**]
19-5
EX 1-102
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
=============================================================================
02-OCT-95 05:52 PM PART COUNT PAGE 6
CONTRACTED SERVICE PART COUNT
Data definition (BOMUNITSITSTY)
=============================================================================
550H COMPAQ PENTIUM PROC. GRP/525HD
TOTAL [**]
8120 Vision 8000 Proc. Group
TOTAL [**]
8122 VISION 8000 PROC GROUP (68/88)
TOTAL [**]
8124 VISION 8000 PRC GROUP (RMS/88)
TOTAL [**]
8156 VISION 6800 PROC. GROUP
TOTAL [**]
912G MOTOROLA 900 PROCESSOR 12 SLOT
TOTAL [**]
BC-4 ESP II BATTERY CHARTER
TOTAL [**]
CA Credit Auth (Modem & PCV)
TOTAL [**]
CCK Cable Conversion Kit
TOTAL [**]
CITZ THERMAL CHECK PRINTER (CITIZN)
TOTAL [**]
CITZR REMOTE THERMAL PTR (CITIZEN)
TOTAL [**]
COM1 Communications (1600/1700)
TOTAL [**]
COM2 Communications (All Other RMS)
TOTAL [**]
DBXK D Box Conversion Kit
TOTAL [**]
HHTII ESP II TERMINAL (1 WATT)
TOTAL [**]
HI HOTEL INTERFACE (520 PCV & PS)
TOTAL [**]
JX9500 SHARP LASER PRINTER
TOTAL [**]
LQ570 EPSON 80 COLUMN PRINTER
TOTAL [**]
19-6
EX 1-103
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
============================================================================
02-OCT-95 05:52 PM PART COUNT PAGE 7
CONTRACTED SERVICE PART COUNT
Data definition (BOMUNITSITSTY)
============================================================================
MVME332 8 PORT SERIAL CARD
TOTAL [**]
MVME335 4 PORT SERIAL CARD
TOTAL [**]
OL810 LASER PRINTER
TOTAL [**]
P CAMP SPARES
TOTAL [**]
RBSII ESP II RADIO BASE STATION
TOTAL [**]
SC Switch Card
TOTAL [**]
SHM Short Haul Modem
TOTAL [**]
TMT80 THERMAL CHECK PTR EPSON TM-T80
TOTAL [**]
TMT80A THERMAL AUTOCUT PTR EPSN TM80A
TOTAL [**]
TMT80R REMOTE THERMAL PRINTER (TMT80)
TOTAL [**]
TMT80S SPARE THERMAL PRINTER (TMT80)
TOTAL [**]
UPS Uninterruptable Power Supply
TOTAL [**]
VGA14 14" VGA COL MON, W/MOUSE, KBD
TOTAL [**]
WP132 Addition 132 Col. Ser. Printer
TOTAL [**]
WP80 Addition, 80 Col. Ser. Printer
TOTAL [**]
IBM IBM Compatible PC
TOTAL [**]
540HD 540MD IDE HARD DRIVE
TOTAL [**]
180024 1800 Control Grou (17+ Nodes)
TOTAL [**]
19-7
EX 1-104
<PAGE>
- ---------------------------------------------------------------------------
**
Confidential treatment has been requested for certain portions of this document.
- ---------------------------------------------------------------------------
<TABLE>
<CAPTION>
SERVICEMAN,RE,SBS REMANCO INTERNATIONAL, INCORPORATED PLANT CODE: RSI
REQUESTER: 6_MCCARTH
PAGE 1
SERVICE INVENTORY SUMMARY REPORT
====================================
SORTED BY PART NUMBER
STANDARD COST
----------------------------------REGIONAL INVENTORY-------------------------------
- --------------------------ENGINEER--------------------------
- ---------------------INTRANSIT-------------------
PART NUMBER NETTA LE NON-NET DEFECTIVE NON-NET DEFECTIVE NON-NET DEFECTIVE TOTAL EXTENDED COST
QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY
<S> <C> <C> <C> <C> <C> <C> <C> <C> <C>
00100004 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100039 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100094 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100183 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100217 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100219 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100220 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100221 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100222 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100223 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100225 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100226 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100231 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100232 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100233 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00100235 -1.00 [**] 0.00 0.00 0.00 0.00 2.00 [**] [**]
00100236 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
001000J4 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
00519006250 0.00 [**] 0.00 0.00 0.00 0.00 10.00 [**] [**]
01200320001 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
01200530001 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
01200530004 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
01300370000 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08001000001 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08001000002 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08001000303 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08008000008 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08008000029 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08008000030 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08020000000 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08020000001 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08020000002 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08020000012 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000001 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000019 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000069 0.00 [**] 0.00 0.00 0.00 0.00 1.00 [**] [**]
08040000085 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000127 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000230 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000285 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000286 0.00 [**] 0.00 0.00 0.00 0.00 2.00 [**] [**]
08040000287 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000288 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000301 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000302 0.00 [**] 0.00 0.00 0.00 0.00 2.00 [**] [**]
08040000303 0.00 [**] 0.00 0.00 0.00 0.00 2.00 [**] [**]
08040000304 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000305 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000306 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000307 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
08040000308 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
19-8
EX 1-105
</TABLE>
<PAGE>
** Confidential treatment has been requested for certain portions of this
document.
<TABLE>
<CAPTION>
SERVICEMAN,RE,SBS REMANCO INTERNATIONAL, INCORPORATED PLANT CODE: RSI
REQUESTER: 6_MCCARTH
PAGE 1
SERVICE INVENTORY SUMMARY REPORT
====================================
SORTED BY PART NUMBER
STANDARD COST
----------------------------------REGIONAL INVENTORY-------------------------------
- --------------------------ENGINEER--------------------------
- ---------------------INTRANSIT-------------------
PART NUMBER NETTA LE NON-NET DEFECTIVE NON-NET DEFECTIVE NON-NET DEFECTIVE TOTAL EXTENDED COST
QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY
<S> <C> <C> <C> <C> <C> <C> <C> <C> <C>
8880336 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8880411 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8880601 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8882029 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8882036 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8882094 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8882946 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8883553 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8883555 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8884744 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
8884769 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100026 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100083 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100067 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100128 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100137 -1.00 [**] 0.00 0.00 0.00 0.00 2.00 [**] [**]
90100100156 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100303 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100323 0.00 [**] 0.00 0.00 0.00 0.00 10.00 [**] [**]
90100100325 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100326 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100338 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100355 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100364 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100402 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100410 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100561 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100562 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100723 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100777 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100861 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100892 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100940 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100957 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100100967 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101015 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101020 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101021 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101042 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101047 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101071 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101076 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101097 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101098 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101110 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101133 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101148 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101218 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101234 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
19-10
EX 1-106
</TABLE>
<PAGE>
** Confidential treatment has been requested for certain portions of this
document.
<TABLE>
<CAPTION>
SERVICEMAN,RE,SBS REMANCO INTERNATIONAL, INCORPORATED PLANT CODE: RSI
REQUESTER: 6_MCCARTH
PAGE 1
SERVICE INVENTORY SUMMARY REPORT
====================================
SORTED BY PART NUMBER
STANDARD COST
----------------------------------REGIONAL INVENTORY-------------------------------
- --------------------------ENGINEER--------------------------
- ---------------------INTRANSIT-------------------
PART NUMBER NETTA LE NON-NET DEFECTIVE NON-NET DEFECTIVE NON-NET DEFECTIVE TOTAL EXTENDED COST
QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY
<S> <C> <C> <C> <C> <C> <C> <C> <C> <C>
90100101265 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101273 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101294 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101329 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101334 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101370 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101421 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101422 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101484 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101492 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101493 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101495 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101499 0.00 [**] 0.00 0.00 0.00 0.00 1.00 [**] [**]
90100101505 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101518 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101523 0.00 [**] 0.00 0.00 0.00 0.00 1.00 [**] [**]
90100101531 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101534 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101536 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101537 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101554 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101557 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101630 0.00 [**] 0.00 0.00 0.00 0.00 3.00 [**] [**]
90100101639 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101645 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101659 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100101732 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102073 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102097 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102143 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102361 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102363 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102367 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102379 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102380 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102392 0.00 [**] 0.00 0.00 0.00 0.00 1.00 [**] [**]
90100102407 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102412 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102477 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102495 0.00 [**] 0.00 0.00 0.00 0.00 1.00 [**] [**]
90100102546 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102672 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102632 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102680 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102690 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102790 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102392 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102394 0.00 [**] 0.00 0.00 0.00 0.00 1.00 [**] [**]
90100102901 0.00 [**] 0.00 0.00 0.00 0.00 1.00 [**] [**]
</TABLE>
19-11
EX 1-107
<PAGE>
** Confidential treatment has been requested for certain portions of this
document.
<TABLE>
<CAPTION>
SERVICEMAN,RE,SBS REMANCO INTERNATIONAL, INCORPORATED PLANT CODE: RSI
REQUESTER: 6_MCCARTH
PAGE 1
SERVICE INVENTORY SUMMARY REPORT
====================================
SORTED BY PART NUMBER
STANDARD COST
----------------------------------REGIONAL INVENTORY-------------------------------
- --------------------------ENGINEER--------------------------
- ---------------------INTRANSIT-------------------
PART NUMBER NETTA LE NON-NET DEFECTIVE NON-NET DEFECTIVE NON-NET DEFECTIVE TOTAL EXTENDED COST
QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY QUANTITY
<S> <C> <C> <C> <C> <C> <C> <C> <C> <C>
90100102912 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102965 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100102979 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103032 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103035 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103080 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103081 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103082 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103083 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103099 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103104 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103115 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103203 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103242 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103283 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103353 -1.00 [**] 0.00 0.00 0.00 0.00 2.00 [**] [**]
90100103412 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103452 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103508 0.00 [**] 0.00 0.00 0.00 0.00 10.00 [**] [**]
90100103966 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100103980 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100104052 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90100104122 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90101202781 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90101303071 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90101303130 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90101303168 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90101303454 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
90401002948 0.00 [**] 0.00 0.00 0.00 0.00 0.00 [**] [**]
</TABLE>
********************END OF REPORT********************************************
19-12
EX 1-108
<PAGE>
- -----------------------------------------------------------------------------
EXHIBIT E
- -----------------------------------------------------------------------------
REMANCO INTERNATIONAL, INC. SYSTEM MAINTENANCE AGREEMENT
250 FORDHAM ROAD SOFTWARE SUPPORT AGREEMENT
WILMINGTON, MA 01887
(508) 658-7400
- -----------------------------------------------------------------------------
CUSTOMER BILLING ADDRESS CUSTOMER INSTALLATION ADDRESS
SAME ( ) OR:
20
EX 1-109
TELEPHONE TELEPHONE
- ------------------------------------------------------------------------------
- ------------------------------------------------------------------------------
CONTACT FAX CONTACT FAX
- ------------------------------------------------------------------------------
- ------------------------------------------------------------------------------
EFFECTIVE DATE EXPIRATION DATE SOFTWARE VERSION CPU SERIAL NUMBER
- ------------------------------------------------------------------------------
- ------------------------------------------------------------------------------
REMANCO INTERNATIONAL CUSTOMER SUPPORT SYSTEM TYPE INSTALLATION TYPE
SALES REPRESENTATIVE
- ------------------------------------------------------------------------------
- ------------------------------------------------------------------------------
- ------------------------------------------------------------------------------
CUSTOMER AGREES TO THE TERMS AND CONDITIONS SET FORTH ON THE REVERSE HEREOF
PAYMENTS ARE TO BE MADE PAYABLE TO REMANCO INTERNATIONAL, INC.
- ------------------------------------------------------------------------------
- ------------------------------------------------------------------------------
DATE NAME TITLE SIGNATURE
- ------------------------------------------------------------------------------
DATE NAME TITLE SIGNATURE
X X X X
- ------------------------------------------------------------------------------
20-1
EX 1-109
<PAGE>
EXHIBIT E
T/R EQUIPMENT
RMS Diagnostic Programs
Listed on Pages 21-1 and 21.2
Documentation
Listed on page 21-3
Equipment
Listed on page 21-4
21
EX 1-110
<PAGE>
RMS DIAGNOSTIC PROGRAMS
DISK ONE (8" Disc)
Operating System, Version 8.2.6
Operating System, Version 16.01.14
Operating System, Version 7.9.24
Utilit.PGM 3.9
Utlit.PGM 5.01
Burnin.PGM 5.00.09
Node.PGM 5.02
Hdform.PGM 5.01
Hdstat.PGM 5.00
Hdship.PGM 5.01
Hdtest.PGM 5.00
Cable.BAS
Basic.PGM, Version 7.0
DISK TWO (5 1/4" Disk)
Operating System, Version 15.01.18
Operating System, Version 15.11.18
Operating System, Version 17.01.14
Utilit.PGM 5.01
Burnin.PGM 5.00.09
Node.PGM 5.02
Hdform.PGM 5.01
21-1
EX 1-111
<PAGE>
Hdstat.PGM 5.00
Hdship.PGM 5.01
Hdtest.PGM 5.00
Rlan.PGM 1.1.2
HHT.PGM 1.1.2
Cable.BAS
DISK THREE (5 1/4" Disk)
Operating System, Version 15.06.00
Operating System, Version 17.06.00
Burnin.PGM 06.01.01
Hdship.PGM 06.00
Hdstat.PGM 06.00
EPROMS
LIRPA, TEROTE, BURROM, 1435P, 1435C
21-2
EX 1-112
<PAGE>
LICENSED DOCUMENTATION
Number of Copies Type of Document
4 Tech Tips
4 Technical Information Bulletins
4 Software Information Notices
(Hardware Section Only)
4 Field Change Orders
4 Installation Guidelines: RMS 1600, RMS 1700, RMS 1500, RMS 1800, ESP's
4 Hard Disk Drive Troubleshooting Guide
4 Software Computability List (all versions)
4 Schematic: 1440, 1450, 1460, and 1460A Terminal;
1470 Hand Held Terminal;
1530, 1540 and 1541 Printer; 1600 and 1800 CPU Board;
PIC Board; RLAN Board;
1260 Switch Board; 1260 Power Control Board;
UCOMMS Board
21-3
EX 1-113
<PAGE>
Test Equipment, Software, Manuals and Tool Kits:
Test Equipment
3 - RMS Terminal Test Jigs, w/Firmware 1 - 1600 RMS Back Office System, w/SFT 1
- - 1700 RMS Back Office System, w/SFT 1 - 1800 RMS Back Office System, w/SFT 1 -
68K Back Office System w/SFT 1 - Motorola Communications analyzer 1 - RMS CPU
Test Jib
FE Held Software, Manuals & Tool Kits
Diagnostic Software
19 - RMS 1600 Diagnostic Disks
19 - RMS 1700 Diagnostic Disks
19 - RMS 1200/1500 Diagnostic Disks
19 - RMS 1800/1900 Diagnostic Disks
Manuals
19 - RMS Bibles
19 - Vision Bibles
19 - Vision Software Information Notice Packages
Tool Kits
18 - Tool Kits
21-4
EX 1-114
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
EXHIBIT G
SCHEDULE OF LABOR RATES
CONTRACTED:
Authorized Hourly Labor Rates: Customer MAI Remanco
Monday - Friday 8:30 a.m. - 5:00 p.m. [**] [**] [**]
(local time)
Monday - Friday after 5:00 p.m. [**] [**] [**]
(local time)
Holidays/Weekends [**] [**] [**]
NON-CONTRACTED:
Authorized Hourly Labor Rates: Customer MAI Remanco
Monday - Friday 8:30 a.m. - 5:00 p.m. [**] [**] [**]
(local time)
Monday - Friday after 5:00 p.m. [**] [**] [**]
(local time)
Holidays/Weekends [**] [**] [**]
Note: all travel times are charged at the applicable rate above
(portal to portal).
*Denotes minimum charge of [**] hours.
All non-contracted Preventive Maintenance is at a minimum of [**] hours.
Labor rates are in addition to travel time and expenses incurred in rendering
services.
22
EX 1-115
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
EXHIBIT H
PROMISSORY NOTE
October 1, 1995
[**]
FOR VALUE RECEIVED, the undersigned, REMANCO INTERNATIONAL, INC., a
Delaware corporation with offices at 260 Fordham Road, Wilmington, Massachusetts
01887 (the "BORROWER") unconditionally promises to pay to the order of MAI
SYSTEMS CORPORATION ("MAI"), at its offices at 9600 Jeronimo Road, Irvine,
California 92718, the principal sum of [**] Dollars [**], with interest thereon
accruing from November 15, 1995 at the rate of [**] percent [**] per annum, on
the then outstanding balance until such principal sum is fully paid pursuant to
this Note. Such Note shall be payable without demand, set-off, deduction or
counterclaim in [**] equal installments of principal and interest of [**]
commencing on the 1st day of [**] and payable on the first of each calendar
month for [**] consecutive months until [**] on which date the balance of any
sums then remaining unpaid shall be due and payable.
Borrower may at any time pre-pay the unpaid balance or any portion thereof
of this debt without penalty.
Upon and after an event of default under this Note (as set forth below),
interest on principal and overdue interest shall, at the option of MAI, be
payable at the rate of [**] percent [**] per annum.
This Note is secured by the Security Agreement of even date herewith by
and between Borrower and MAI and reference is made thereto for a statement of
the terms and provisions thereof.
On the happening of any of the following events, each of which will
constitute a default under this Note, all liabilities of Borrower to MAI shall
become immediately due and payable at the option of MAI: (1) an Event of Default
under the Services Agreement dated on even date herewith by and between Borrower
and MAI and failure to cure same within the cure period provided in such
agreement; (2) filing of any petition in bankruptcy by or against Borrower; (3)
application for appointment of a receiver for, making of general assignment for
the benefit of creditors by, or insolvency of Borrower; or (4) failure to make
payment hereunder within ten (10) days of written notice from MAI that such
payment is past due. On occurrence of any such event or at any time thereafter,
MAI shall have the remedies under the Security Agreement and of a
23-1
EX 1-116
<PAGE>
secured party under the Uniform Commercial Code of the State of California. MAI
may waive any default before or after the default has been declared without
impairing its right to declare a subsequent default under this Note, this right
being a continuing one.
Borrower waives protest of this Note. If this Note is not paid when due,
Borrower agrees to pay all costs and expenses of collection, including
reasonable attorney fees. MAI shall in no event be liable for any party for
failure to collect this Note, in whole or in part.
This Note shall be governed by and construed in accordance with the laws
of the State of California
REMANCO INTERNATIONAL, INC.
By:
Name:
Date:
ELC2027
23-2
EX 1-117
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
EXHIBIT I
SECURITY AGREEMENT
This SECURITY AGREEMENT (the "Security Agreement") is made and entered
into October 1, 1995 by and between MAI SYSTEMS CORPORATION, a Delaware
Corporation with offices at 9600 Jeronimo Road, Irvine, California 92718 (the
"Lender") and REMANCO INTERNATIONAL, INC., a Delaware corporation with offices
at 260 Fordham Road, Wilmington, Massachusetts 01887 ("the Borrower").
WITNESSETH:
WHEREAS, Lender and Borrower have entered into a Services Agreement (the
"Agreement") dated as of October 1, 1995 pursuant to which Lender will assume
certain obligations and perform certain services for Borrower and Borrower will
compensate Lender therefor and perform certain duties and retain certain
obligations with respect thereto;
WHEREAS, as a material part of such Agreement, Lender has loaned to
Borrower the principal sum of [**] under that certain promissory note (the
"Note" a copy of which is attached hereto as Exhibit "A") which Note has been
executed and delivered by Borrower to Lender currently herewith (such Note
constitutes the "Indebtedness" herein) and Borrower has agreed to provide
security therefor pursuant to the terms and conditions set forth herein;
NOW THEREFORE, in consideration of the mutual promises, agreements and
covenants set forth herein and in the Agreement, and for other good and valuable
consideration, the receipt and sufficiency of which is hereby acknowledged,
Lender and Borrower agree as follows.
1. GRANT OF SECURITY INTEREST. As security for the payment of the Indebtedness,
Borrow does hereby grant to Lender a continuing first security interest in, a
lien upon, and a right of set off against, and hereby assigns to Lender as
security, the [**] as defined below, whether now owned or hereafter acquired or
existing, and wherever located (the "Collateral"). [**] shall consist of [**].
2. COVENANTS. Remanco represents that the [**] are usable for their respective
intended purposes and are adequate to perform the obligations required of MAI
under the Agreement consistent with the manner performed by Remanco prior to the
effective date of the Agreement and any lien, security interests or encumbrances
in the [**] or affecting same shall be removed or subordinated first to MAI's
interest.
24-1
EX 1-117
<PAGE>
3. RELEASE OF SECURITY AGREEMENT. As such times as all Indebtedness has been
paid to Lender in full, Lender shall execute and deliver to Borrower all
instruments and other documents as may be necessary or proper to release the
lien and security interest in the Collateral which has been granted hereunder.
4. EVENTS OF DEFAULT AND REMEDIES.
4.1 EVENTS OF DEFAULT. The occurrence or existence of any one or more
of the following events are referred to herein individually as an
"Event of Default", and collectively "Events of Default""
(a) Borrower fails to pay any of the Indebtedness or fails to
perform in any material aspect of the terms, covenants, conditions or provisions
contained in this Security Agreement within ten (10) days of written notice from
Lender that such payment is past due or that Borrower has failed to perform in
any material respect under this Security Agreement;
(b) any representation, warranty or statement of fact made by
borrower to Lender in this Agreement or otherwise shall when made or deemed made
by false or misleading in any material respect;
(c Borrower commits an Event of Default under the Agreement;
(d) Borrower dissolves or suspends or discontinues doing business;
(e) Borrower becomes insolvent, makes an assignment for the
benefit of creditors or principal creditorsor
(f) a case or proceeding under the bankruptcy laws of the United
States of America now or hereafter in effect or under insolvency,
reorganization, receivership, readjustment of debt, dissolution or liquidation
law or statue of any jurisdiction now or hereafter in effect (whether at law or
in equity) is filed by or against Borrower or all or any part of its properties
and such petition or application is not dismissed within thirty (30) days after
the date of its filing or Borrower shall file any answer admitting or not
contesting such petition or application or indicates its consent to,
acquiescence in or approval of, any such action or proceeding or the relief
requested is granted sooner.
4.2 REMEDIES
(a) At any time an Event of Default exists or has occurred and is
continuing, Lender shall have all rights and remedies provides in this Security
Agreement, the Agreement, the Uniform Commercial Code and other applicable law,
all of which rights and remedies may be exercised without notice to or consent
by Borrower, except as such notice or consent is expressly provided for
hereunder or required by applicable law. All rights, remedies and powers granted
to Lender hereunder, under the Agreement, the
24-2
EX 1-119
<PAGE>
Uniform Commercial Code or other applicable law, are cumulative, not exclusive
and enforceable, in Lender's discretion, alternatively, successively, or
concurrently on any one or more occasions, and shall include, without
limitation, the right to apply to a court of equity for an injunction to
restrain a breach or threatened breach by Borrower of this Security Agreement.
(b) Without limiting the foregoing, at any time an Event of Default
exists or has occurred and is continuing, Lender may, in its discretion and
without limitation, (i) accelerate the payment of the Indebtedness and demand
immediate payment thereof to Lender; (ii) with or without judicial process, take
title to and possession of the Collateral wherever located; (iii) collect,
foreclose, receive, appropriate, setoff and realize upon any and all Collateral;
and/or (iv) terminate this Agreement.
4.3 POWER OF ATTORNEY. Borrower hereby irrevocably designates and appoints
Lender (and all persons designated by Lender) as Borrower's true and lawful
attorney-in-fact, and authorizes Lender, in Borrower's or Lender's name, to: (a)
at any time an Event of Default or event which with notice or passage of time or
both would constitute an Event of Default exists or has occurred and is
continuing (i) demand payment of Indebtedness and transfer of all title and
rights to Collateral, (ii) enforce payment of Indebtedness by legal proceedings
or otherwise, (iii) exercise all of Borrower's rights and remedies to take title
to, possession of and exercise all rights in Collateral, and (iv) do all acts
and things which are necessary, in Lender's determination, to fulfill Borrower's
obligations under this Agreement to execute in Borrower's name and file any UCC
financing statements or amendments thereto with respect to the Collateral.
Borrower hereby releases Lender and its officers, employees and designees from
any liabilities arising from any act or acts under this power of attorney and in
furtherance thereof, whether of omission or commission, except as a result of
Lender's own gross negligence or willful misconduct.
5. GOVERNING LAW: WAIVERS AND CONSENTS.
5.1 (a) The validity, interpretation and enforcement of this Security
Agreement and any dispute arising out of the relationship between the parties
hereto, whether in contract, tort, equity or otherwise, shall be governed by the
internal laws of the State of California (without giving effect to principles of
conflicts of law). Borrower and Lender irrevocably consent and submit to the
non-exclusive jurisdiction of the Superior Courts of the State of California for
the County of Los Angeles and the United States District Court for the Central
District of California and waive any objection based on venue or forum non
conveniens with respect to any action instituted therein arising under this
Agreement.
(b) Borrower hereby waives personal service of any and all process
upon it and consents that all such service of process may be made by certified
mail (return receipt requested) directed to its address set forth on the
signature pages hereof and service so made shall be deemed to be completed five
(5) days after the same shall have been so deposited in the U.S. mails, or, at
Lender's option, by service upon Borrower in any other manner provided under the
rules of any such courts. Within thirty (30) days after such
24-3
EX 1-120
<PAGE>
service, Borrower shall appear in answer to such process, failing which Borrower
shall be deemed in default and judgment may be entered by Lender against
Borrower for the amount of the claim and other relief requested.
(c BORROWER AND LENDER EACH HEREBY WAIVES ANY RIGHT TO TRIAL BY JURY
OF ANY CLAIM, DEMAND, ACTION OR CAUSE OF ACTION ARISING UNDER THIS SECURITY
AGREEMENT WHETHER NOW EXISTING OR HEREAFTER ARISING, AND WHETHER IN CONTRACT,
TORT, EQUITY OR OTHERWISE. BORROWER AND LENDER EACH HEREBY AGREES AND CONSENTS
THAT ANY SUCH CLAIM, DEMAND, ACTION OR CAUSE OF ACTION SHALL BE DECIDED BY COURT
TRIAL WITHOUT A JURY AND THAT BORROWER OR LENDER MAY FILE AN ORIGINAL
COUNTERPART OF A COPY OF THIS SECURITY AGREEMENT WITH ANY COURT AS WRITTEN
EVIDENCE OF THE CONSENT OF THE PARTIES HERETO TO THE WAIVER OF THEIR RIGHT TO
TRIAL BY JURY.
(d) Lender shall not have any liability to Borrower (whether in
tort, contract, equity or otherwise) for losses suffered by Borrower in
connection with, arising out of, or in any way related to the transactions or
relationships contemplated by this Security Agreement, or any act, omission or
event occurring in connection herewith, unless it is determined by a final and
on-appealable judgment or court order binding on Lender, that the losses were
the result of acts or omissions constituting gross negligence or willful
misconduct. In any such litigation, Lender shall be entitled to the benefit of
the rubuttalbe presumption that it acted in good faith and with the exercise of
ordinary care in the performance by it of the terms of this Agreement.
5.2 WAIVER OF NOTICES. Borrower hereby expressly waives demand,
presentment, protest and notice of protest of dishonor with respect to any and
all instruments and commercial paper, included in or evidencing any of the
Indebtedness or the Collateral, and any and all other demands and notices of any
kind or nature whatsoever with respect to the Indebtedness, the Collateral and
this Security Agreement, except such as are expressly provided for herein. No
notice to or demand on borrower which Lender may elect to give shall entitle
borrower to any other or further notice or demand in the same, similar or other
circumstances.
5.3 AMENDMENTS AND WAIVERS. Neither this Security Agreement nor any
provision hereof shall be amended, modified, waived or discharged orally or by
course of conduct, by only by a written agreement signed by an authorized
officer of Lender. Lender shall not, by any act, delay, omission or otherwise be
deemed to have expressly or impliedly waived any of its rights, powers and/or
remedies unless such waiver shall be in writing and signed by an authorized
officer of Lender. Any such waiver shall be enforceable only to the extent
specifically set forth therein. A waiver by Lender of any right, power and/or
remedy on any one occasion shall not be construed as a bar to or waiver of any
such right, power and/or remedy which Lender would otherwise have on any future
occasion, whether similar in kind or otherwise.
24-4
EX 1-121
<PAGE>
5.4 WAIVER OF COUNTERCLAIMS. Except as expressly permitted in the
Agreement, Borrower waives all rights to interpose any claims, deductions,
setoffs or counterclaims of any nature (other than compulsory counterclaims) in
any action or proceeding with respect to this Security Agreement, the
Indebtedness, the Collateral or any matter arising therefrom or relating hereto
or thereto.
5.5 INDEMNIFICATION. Borrower shall indemnify and hold Lender, and its
directors, agents, employees and counsel, harmless from and against any and all
losses, claims, damages, liabilities, costs or expenses imposed on, incurred by
or asserted against any of them in connection with any litigation or proceeding
commenced or threatened related to the negotiation, preparation, execution,
delivery, enforcement, performance or administration of this Security Agreement,
or any proceeding related to any of the transactions contemplated hereby or any
act, omission, event or transaction related or attendant thereto, including,
without limitation, amounts paid in settlement, court costs, and the fees and
expenses of counsel. To the extent that the undertaking to indemnify, pay and
hold harmless set forth in this Section may be unenforceable because it violates
any law or public policy, Borrower shall pay the maximum portion which it is
permitted to pay under applicable law to Lender in satisfaction of indemnified
matters under this Section. The foregoing indemnity shall survive the payment of
the Indebtedness and the termination or non-renewal of this Security Agreement.
6. GENERAL.
6.1 TERM. This Agreement shall become effective as of the date set forth
on the first page hereof and shall continue in full force and effect until full
repayment of the Indebtedness by borrower.
6.2 NOTICES. All notices requests and demands hereunder shall be in
writing and (a) made to Lender at its address set forth above and to Borrower at
its office set forth above, or to such other address as either party may
designate by written notice to the other in accordance with this provision, and
(b) deemed to have been given or made; if delivered in person, immediately upon
delivery; if by telex, telegram or facsimile transmission, immediately upon
sending and upon confirmation of receipt; if by nationally recognized overnight
courier service with instructions to deliver the next business day, one (1)
business day after sending; and if by certified mail, return receipt request,
five (5) days after mailing.
6.3 PARTIAL INVALIDITY. If any provision of this Security Agreement is
held to be invalid or unenforceable, such invalidity or unenforceability shall
not invalidate this Security Agreement as a whole, but this Security Agreement
shall be construed as though it did not contain the particular provision held to
be invalid or unenforceable and the rights and obligations of the parties shall
be construed and enforced only to such extent as shall be permitted by
applicable law.
24-5
EX 1-122
<PAGE>
6.4 SUCCESSORS. This Security Agreement and any other document referred to
herein or therein shall be binding upon and inure to the benefit of and be
enforceable by Lender, Borrower and their respective successors and assigns,
except that Borrower may not assign its rights under this Security Agreement and
any other document referred to herein without the prior written consent of
Lender. Lender may, after notice to Borrower, assign its rights and delegate its
obligations under this Security Agreement and in which event, the assignee or
participant shall have, to the extent of such assignment or participation, the
same rights and benefits as it would have if it were the Lender hereunder,
except as otherwise provided by the term of such assignment or participation.
6.5 ENTIRE AGREEMENT. This Security Agreement and the Exhibit A hereto,
and any instruments and documents delivered or to be delivered in connection
herewith, represents the entire agreement and understanding concerning the
subject matter hereof and thereof between the parties hereto, and supersede all
other prior agreements, understandings, negotiations and discussions,
representations, warranties, commitments, proposals, offers and contracts
concerning the subject matter hereof, whether oral or written.
IN WITNESS WHEREOF, Lender and Borrower have executed this Agreement as of
the date first above written.
LENDER: BORROWER:
MAI SYSTEMS CORPORATION REMANCO INTERNATIONAL, INC.
By: By:
Name: Name:
Title: Title:
24-6
EX 1-123
<PAGE>
EXHIBIT J
MASTER ESCROW AGREEMENT
between
PRODUCER and FORT KNOX
This escrow agreement is intended for use by a Producer (Licensor) and Fort
Escrow Services, Inc. The Producer may escrow multiple products under this
agreement. In addition, multiple Licensees (end users) may be registered as
beneficiaries of this agreement. Although each Licensee does not sign the
agreement, Fort Knox does notify them of the service.
25-1
EX 1-124
<PAGE>
Master Escrow Agreement
This Master Escrow Agreement ("Agreement") is made as of this 1st day of
November, 1994, by and between Remanco International, Inc. ("Producer") and
Fort Knox Escrow Services, Inc. ("Fort Knox").
Preliminary Statement. Producer intends to deliver to Fort Knox a sealed
package containing magnetic tapes, disks, disk packs, or other forms of media,
in machine readable form, and the written documentation prepared in connection
therewith, and any subsequent updates or changes thereto (the "Deposit
Materials") for the computer software products (the "System(s)"), all as
identified from time to time on Exhibit B hereto. Producer desires Fort Knox to
hold the Deposit Materials, and, upon certain events, deliver the Deposit
Materials (or a copy thereof) to those persons listed from time to time on
Exhibit C hereto as a licensee of Producer ("Licensee"), in accordance with the
terms hereof.
Now, therefore, in consideration of the foregoing, of mutual promises
hereinafter set forth, and for other good and valuable consideration, the
receipt and sufficiency of which are hereby acknowledged, the parties agree as
follows:
1. Delivery by Producers. Producer shall be solely responsible for
delivering to Fort Knox the Deposit Materials as soon as practicable. Fort Knox
shall hold the Deposit Materials in accordance with the terms hereof. Fort Knox
shall have no obligation to verify the completeness or accuracy of the Deposit
Materials.
2. Duplication; Updates.
(a) Fort Knox may duplicate the Deposit Materials by any means in order to
comply with the terms and provisions of the Agreement, provided that the
Licensee to whom a copy of the Deposit materials is to be delivered pursuant to
the terms hereof shall bear the expense of duplication. Alternatively, Fort
Knox, by notice to Producer, may require Producer to reasonably promptly
duplicate the Deposit Materials.
(b) Producer shall deposit with Fort Knox any modifications, updates, new
releases or documentation related to the Deposit Materials by delivering to Fort
Knox an updated version of the Deposit Materials ("Additional Deposit") as soon
as practicable after the modifications, have no obligation to verify the
accuracy or completeness of any Additional Deposit or to verify that any
Additional Deposit is in fact a copy of the Deposit Materials or any
modification, update, or new release thereof.
3. Notification of Deposits. Simultaneous with the delivery to Fort Knox
of the Deposit Materials or any Additional Deposit, as the case may be, Producer
shall deliver to Fort Knox and to each Licensee a written statement specifically
identifying all items deposited and stating that the Deposit materials or any
Additional Deposit, as the case may be, so deposited have been inspected by
Producer and are complete and accurate.
25-2
EX 1-125
<PAGE>
4. Delivery of Fort Knox
4.1 Delivery by Fort Knox to Licensees. Fort Knox shall deliver the
Deposit Materials, or a copy thereof, to a Licensee only in the event that:
(a) Producer notifies Fort Knox to effect such delivery to a Licensee of
Licensees at a specific address or addresses, the notification being accompanied
by a check payable to Fort in the amount of one hundred dollars ($100.00); or
(b) Fort Knox receives from any Licensee:
(i) Written notification that Producer has failed in a material
respect to support the applicable Systems as required by a
license agreement ("License Agreement") between Licensee and
Producer or that Producer has otherwise defaulted in a
material respect under the License Agreement ("Producer
Default");
(ii) evidence satisfactory to Fort Knox that Licensee has
previously notified Producer of such Producer Default in
writing;
(iii) a written demand that the Deposit Materials be released
and delivered to Licensee;
(iv) a written undertaking from the Licensee that the Deposit
materials being supplied to the Licensee will be used only as
permitted under the terms of the License Agreement;
(v) specific instructions from the Licensee for this delivery; and
(vi) a check payable to Fort Knox in the amount of one hundred
dollars ($100.00).
(c If the provisions of paragraph 4.1(a) are satisfied, Fort Knox shall,
within five business days after receipt of the notification and check specified
in paragraph 4.1(a), deliver the Deposit Materials in accordance with the
applicable instructions.
(d) If the provisions of paragraph 4.1(b) are met, Fort Knox shall, within
five (5) business days after receipt of all the documents specified in paragraph
4.1(b), send by certified mail to Producer a photo static copy of all such
documents. Producer shall have thirty (30) days from the date on which Producer
receives such documents ("Objection Period") to notify Fort Knox of its
objection ("Objection Notice") to the release of the Deposit Materials to a
Licensee and to request that the issue of Licensee's entitlement to a copy of
the Deposit Materials be submitted to arbitration in accordance with the
following provisions:
25-3
EX 1-126
<PAGE>
(i) If Producer shall send an Objection Notice to Fort Knox during the
Objection Period, the matter shall be submitted to, and settled by arbitration
by, a panel of three (3) arbitrators chosen by the Atlanta Regional Office of
the American Arbitration Association in accordance with the rules of the
American Arbitration Association. The arbitrators shall apply Georgia law. At
least one (1) arbitrator shall be reasonably familiar with the computer software
industry. The decision of the arbitrators shall be binding and conclusive on all
parties involved, and judgment upon their decision may be entered in a court of
competent jurisdiction. All costs of the arbitration incurred by Fort Knox,
including reasonable attorneys' fees and costs, shall be paid by the Producer.
If, however, a Licensee refuses to submit to such binding arbitration, the
matter shall not be submitted to arbitration and Fort Knox may submit the matter
to any court of competent jurisdiction in an interpleader or similar action in
accordance with paragraph 6(a) hereof.
(ii) Producer may, at any time prior to the commencement of arbitration
proceedings, notify Fort Knox that Producer has withdrawn the Objection Notice.
Upon receipt of any such notice from Producer, Fort Knox shall reasonably
promptly deliver the Deposit Materials to the Licensee in accordance with the
instructions specified in paragraphs 4.19(b)(v).
(e) If, during the Objection Period, Fort Knox has not received an
Objection Notice from Producer, then Fort Knox shall reasonably promptly deliver
the Deposit Materials to the Licensee in accordance with the instructions
specified in paragraph 4.1(b)(v).
4.2 Delivery by Fort Knox to Producer. Fort Knox shall release and deliver
the Deposit Materials to Producer upon termination of the Agreement in
accordance with paragraph 7(a) hereof.
5. Indemnity. Producer shall indemnify and hold harmless Fort Knox and
each of its directors, officers, agents, employees and stockholders ("Fort Knox
indemnities") absolutely and forever, from and against any and all claims,
actions, damages, suits, liabilities, obligations, costs, fees, charges, and any
other expenses whatsoever, including reasonable attorneys' fees and costs, that
may be asserted against any Fort Knox indemnitee in connections with this
Agreement or the performance of Fort Knox or any Fort Knox indemnitee hereunder.
25-4
EX 1-127
<PAGE>
6. Disputes and Interpleader.
(a) In the Event of any dispute between any of Fort Knox, Producer and/or
any Licensee relating to delivery of the Deposit Materials by Fort Knox or to
any other matter arising out of this Agreement, Fort Knox may submit the matter
to any court of competent jurisdiction in an interpleader or similar action. Any
and all costs incurred by Fort Knox in connection therewith, including
reasonable attorneys' fees and costs, shall be borne by Producer.
(b) Fort Knox shall perform any acts ordered by any court of competent
jurisdiction, without any liability or obligation to any party hereunder by
reason of such act.
7. Term and Renewal.
(a) The initial term of this Agreement shall be two years, commencing on
the date hereof (the "Initial Term"). This Agreement shall be automatically
extended or an additional term of one year ("Additional Term") at the end of the
Initial Term and at the end of each Additional Term hereunder unless, on or
before ninety (90) days prior to the end of the Initial Term or an Additional
Term, as the case may be, either party notifies the other party that it wishes
to terminate the Agreement at the end of such term.
(b) In the event of termination of this Agreement in accordance with
paragraph 7(a) hereof, Producer shall pay all fees due Fort Knox and shall
promptly notify all Licensees that this Agreement has been terminated and that
Fort Knox shall return to Producer all copies of the Deposit Materials then in
its possession.
(c In the event of termination of this Agreement in accordance with
paragraph 8(b) hereof, Producer shall promptly notify all Licensees that this
Agreement has been terminated.
8. Fees. Producer shall pay to Fort Knox fees in accordance with Exhibit A
as compensation for Fort Knox's services under this Agreement.
(a) Payment. Fort Knox shall issue an invoice to Producer following
execution of this Agreement ("Initial Invoice"), on the commencement of any
Additional Term hereunder, and in connection with the performance of any
additional services hereunder. Payment is due upon receipt of invoice. All fees
and charges are exclusive of, and Producer is responsible for the payment of,
all sales, use and life taxes. Fort Knox shall have no obligations under this
Agreement until the Initial Invoice has been paid in full by Producer.
(b) Nonpayment. In the event of non-payment of any fees or charges invoiced
by Fort Knox, Fort Knox shall give notice of non-payment of any fee due and
payable hereunder to the Producer and, in
25-5
EX 1-128
<PAGE>
such an event, the Producer shall have the right to pay the unpaid fee within
ten (10) day period. Fort Knox shall give notice of non-payment of any fee due
and payable hereunder to the licensee(s) and, in such event, the Licensee(s)
shall have the right to pay the unpaid fee within ten (10) days of receipt of
such notice from Fort Knox. Upon payment of the unpaid fee by either the
Producer or the Licenee(s), as the case may be, this Agreement shall continue in
full force and effect until the end of the applicable term. Failure to pay the
unpaid fee under this paragraph 8(b) by both Producer and the Licensee(s) shall
result in termination of this Agreement.
9. Ownership of Deposit Materials. Fort Knox and Producer recognize and
acknowledge that ownership of the
Deposit Materials shall remain with Producer at all times.
10. Available Verification Services. Upon receipt of a written request
from any Licensee, Fort Knox and such Licensee may enter into a separate
agreement pursuant to which Fort Knox will agree, upon certain terms and
conditions, to inspect the Deposit Materials for the purpose of verifying its
relevance, completeness, currency, accuracy and functionality ("Technical
Verification Agreement"). Upon written request from Producer; Fort Knox will
issue to Producer a copy of any written technical verification report rendered
in connection with such engagement. If Fort Knox and Liensee enter into such
Technical Verification Agreement, Producer shall reasonably cooperate with Fort
Knox by providing its facilities, computer systems, and technical and support
personnel for technical verification whenever reasonably necessary. If requested
by any Licensee, Producer shall permit one employee of such Licensee to be
present at Producer's facility during any such verification of the Deposit
Materials.
11. Bankruptcy. Producer and Licensee acknowledge that this Agreement is
an "agreement supplementary to" the License Agreement as provided in Section 365
(n) of Title 11, United States Code (the "Bankruptcy Code"). Producer
acknowledges that if Producer as a debtor in possession or a trustee in
Bankruptcy in a case under the Bankruptcy Code rejects the License Agreement or
this Agreement, Licensee may elect to retain its rights under the License
Agreement and this Agreement as provided in Section 365 (n) of the Bankruptcy
Code. Upon written request of Licensee to Producer or the Bankruptcy Trustee,
Producer or such Bankruptcy Trustee shall not interfere with the rights of
Licensee as provided in the License Agreement and this Agreement, including the
right to obtain the Deposit Material from Fort Knox.
12. Miscellaneous.
(a) Remedies. Except for actual fraud, gross negligence or intentional
misconduct, Fort Knox shall not be liable to Producer for any act, or failure to
act, by Fort Knox in connection with this Agreement. Any liability of Fort Knox
regardless of the cause shall be limited to the actual cost of new blank
magnetic media. Fort Knox will not be liable for special, indirect, incidental
or consequential damages hereunder.
25-6
EX 1-129
<PAGE>
(b) Natural Degeneration; Updated Version. In addition, the parties
acknowledge that as a result of the passage of time alone, the Deposit Materials
are susceptible to loss of quality ("Natural Degeneration"). It is further
acknowledged that Fort Knox shall have no liability or responsibility to any
person or entity for any Natural Degeneration. For the purpose of reducing the
risk of Natural Degeneration, Producer shall deliver to Fort Knox a new copy of
the Deposit Materials at lease once every three years.
(c Permitted Reliance and Abstention. Fort Knox may rely and shall be
fully protected in acting or refraining from acting upon any notice or other
document believed by Fort Knox in good faith to be genuine and to have been
signed or presented by the proper person or entity. Fort Knox shall have no
duties or responsibilities except those expressly set forth herein.
(d) Independent Contract; No Third Party Beneficiary. Fort Knox is an
independent contractor, and is not an employee or agent of either the Producer
or any Licensee. No Licensee is a party to this Agreement, and no Licensee shall
have any rights hereunder, including, without limitation, any rights as a third
party beneficiary. Producer shall make no representation to any Licensee that is
inconsistent with this paragraph 11(d).
(e) Amendments. This Agreement shall not be modified or amended except by
another agreement in writing executed by the parties hereto.
(f) Entire Agreement. This Agreement, including all exhibits hereto,
supersedes all prior discussions, understandings and agreements between the
parties with respect to the matters contained herein, and constitutes the entire
agreement between the parties with respect to the matters contemplated herein.
All exhibits attached hereto are by this reference made a part of this Agreement
and are incorporated herein.
(g) Counterparts; Governing Law. This Agreement may be executed in two
counterparts, each of which when so executed shall be deemed to be an original
and both of which when taken together shall constitute one and the same
Agreement. This Agreement shall be construed and enforced in accordance with the
laws of the State of Georgia.
(h) Confidentiality. Fort Knox will hold and release the Deposit Materials
only in accordance with the terms and conditions hereof, and will maintain the
confidentiality of the Deposit Materials.
(i) Notices. All notices, requests, demands or other communications
required or permitted to be given or made under this Agreement shall be in
writing and shall be delivered by hand or by commercial overnight delivery
service which provides for evidence of receipt, or mailed by certified mail,
return receipt requested, postage prepaid, and addressed as follows:
25-7
EX 1-130
<PAGE>
(i) If to Producer:
to address listed on the signature page hereof
(ii) If to Fort:
Fort Knox Escrow Services, Inc.
3539-A Church Street
Clarkston, Georgia 30021-1717
Attn: Contracts Administrator
Copy: Michael A. Payne
Vice President
If delivered personally or by commercial overnight delivery service, the
date on which the notice, request, instruction or document is delivered shall be
the date on which delivery is deemed to be made, and if delivered by mail, the
date on which such notice, request, instruction or document is received shall be
the date on which delivery is deemed to be made. Any party may change its
address for the purpose of this Agreement by notice in writing to the other
parties as provided herein.
(j) Survival. Paragraphs 5, 6, 8, 9 and 11 shall survive any termination of
this Agreement.
(k) No Waiver. No failure on the part of any party hereto to exercise, and
no delay in exercising any right, power or single or partial exercise of any
right, power or remedy by any party will preclude any other further exercise
thereof or the exercise of any other right, power or remedy. No express waiver
or assent by any party hereto to any breach of or default in any term or
condition of this Agreement shall constitute a waiver of or any assent to any
succeeding breach of or default in the same or any other term or condition
hereof.
25-8
EX 1-131
<PAGE>
IN WITNESS WHEREOF each of the parties has caused its duly authorized
officer to execute this Agreement as of the date and year first above written.
Fort Knox Escrow Services, Inc.
By:
Title:
Producer
By:
Title: Vice President, Customer Support
Address: Remanco International, Inc.
260 Fordham Road
Wilmington, MA 01887
Attention: Catherine J. Bedford
25-9
EX 1-132
<PAGE>
EXHIBIT A
FEES ARE TO BE PAID TO PRODUCER SHALL BE AS FOLLOWS:
Initialization fee (one time only) $750
Annual maintenance/storage fee $800/Product
(includes one Deposit Material update) (foreign $900)
Annual registration fee FULL SERVICE
$150/Licensee
(foreign license $250)
ECONOMY SERVICE
$30/Licensee
(foreign license $50)
Additional Updates $100/Product
(above one per year)
PAYABLE BY LICENSEE OR DEVELOPER:
Due Upon Licensee's or Developer's
Request for Release of Deposit
Materials $100/Product per
Licensee for initial 2
hrs.
$50/hour for
additional hours
A ten percent discount is credited towards the initialization fee for current
Fort Knox clients. Fees due upon receipt of signed contract or deposit material,
whichever comes first. Thereafter, fee shall be subject to their current
pricing, provided that such prices shall not increase by more than 10% per year.
25-10
EX 1-133
<PAGE>
EXHIBIT B
B-1 PRODUCT NAME: Release 3.1 Software
VERSION #: 3.1.0.v62 and 3.1.0.f62
DESCRIPTION OF MATERIALS DEPOSITED: DATE: November 1, 1994
3.1 source code on tape Compiled version 3.1.0.v62 on tape Compiled
version 3.1.0.f62 on tape 3.1 process specification
SUB-PRODUCT NAME: Multi-Auth Software
VERSION #: Multi-auth.2.68k and Multi-auth.2.88k
DESCRIPTION OF MATERIALS DEPOSITED: DATE: November 1, 1994
Multi-Auth source code on tape Compiled version multi-auth 2.68k on tape
Compiled version multi-auth 2.88k on tape Multi-Auth process specification
SUB-PRODUCT NAME: Security Software
VERSION #: 3.1.0.0.m.6K, 3.1.0.0.t.68k, 3.1.0.0.M.88k and 3.1.0.0.T.88k
DESCRIPTION OF MATERIALS DEPOSITED: DATE: November 1, 1994
Security source code on tape Compiled version 3.1.0.0.M.68k on tape
Compiled version 3.1.0.0.T.68k on tape Compiled version 3.1.0.0.M.88k on
tape Compiled version 3.1.0.0.T.88k on tape Security software process
specification
25-11
EX 1-134
<PAGE>
EXHIBIT B
SUB-PRODUCT NAME: Hard Drive Definition Software
VERSION #: ST339 Disk Definition
DESCRIPTION OF MATERIALS DEPOSITED: DATE: November 1, 1994
Source code on tape Compiled version for primary drive Compiled version for
secondary drive Process specification
SUB-PRODUCT NAME: Unix Development Overlay
VERSION #: 68: and 88K versions
DESCRIPTION OF MATERIALS DEPOSITED: DATE: November 1, 1994
Source code on tape Compiled 68K version on tape Compiled 88K version on
tape Process specification
SUB-PRODUCT NAME: SSUpdate Program
VERSION #: SSUpdate. Rev2
DESCRIPTION OF MATERIALS DEPOSITED: DATE: November 1, 1994
Source code on tape Compiled 68K version on tape Compiled 88K version on
tape Process specification
25-12
EX 1-135
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
EXHIBIT C
LICENSEES
COMPANY CONTACT
NAME & ADDRESS PERSON TELEPHONE FACSIMILE
[**] [**] [**] [**]
25-13
EX 1-136
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
EXHIBIT C
LICENSEES
COMPANY CONTACT
NAME & ADDRESS PERSON TELEPHONE FACSIMILE
[**] [**] [**] [**]
25-14
EX 1-137
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
EXHIBIT C
LICENSEES
COMPANY CONTACT
NAME & ADDRESS PERSON TELEPHONE FACSIMILE
[**] [**] [**] [**]
25-15
EX 1-138
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
EXHIBIT C
LICENSEES
COMPANY CONTACT
NAME & ADDRESS PERSON TELEPHONE FACSIMILE
[**] [**] [**] [**]
25-16
EX 1-139
<PAGE>
VISION 3.1 ESCROW ACCOUNT INVENTORY LIST
SOFTWARE RELEASE PART NUMBER
VISION RELEASE 3.1.0.V62 Rev 3 (source) 1 of 2P/N:90008404231 VISION
RELEASE 3.1.0.v62 Rev 3 (source) 2 of 2P/N:90008404231 VISION RELEASE 3.1.0.v62
Rev 3 (distribution) 1 of 1 P/N:90008304211 VISION Security Tools Overlay
3.1.0.0.t.68k (distribution) 1 of 1 P/N:90008304218 VISION Manufacturing
Security Overlay 68k (distribution) 1 of 1 P/N:90008304217 VISION RELEASE
3.1.0.f62 Rev 3 (source) 1 of 2P/N:90008404210 VISION RELEASE 3.1.0.f62 Rev 3
(source) 2 of 2P/N:90008404210 VISION RELEASE 3.1.0.f62 Rev 3 (distribution) 2
of 2 P/N:90008304210 VISION Security Tools Overlay 3.1.0.0.t.88k (distribution)
1 of 1 P/N:90008304216 VISION Manufacturing Security Overlay 88k (distribution)
1 of 1 P/N:90008304215 VISION Manufacturing Security Overlay/tools 68k & 88k
(source) 1 of 1 P/N:90008404215 VISION 3.1 (pro spec) 1 of 1P/N:90101504210
VISION 4.1.0.0.m.88k & 68k VISION 3.1.0.0.t.88k&68k (pro spec) 1 of 1
P/N:90101504215
68k Development Overlay R3v7.1 Rev 2 (source) 1 of 1P/N:90008404026 68k
Development Overlay R3v7.1 Rev 2 (distribution) 1 of 1 P/N:90008304026 88k
Development Overlay R32v3.1 Rev 2 (source) 1 of 1P/N:90008404028 88k Development
Overlay R32v3.1 Rev 2 (distribution) 1 of 1 P/N:90008304028 88k Development UNIX
Overlay Installation (pro spec) 1 of 1P/N:90101504028 68k Development UNIX
Overlay Installation (pro spec) 1 of 1P/N:90101504026
SSupdate Generator Overlay Rev 2 (source) 1 of 1P/N:90008403889 SSupdate
Generator Overlay Rev 2 (distribution) 1 of 1 P/N:90008304093 SSupdate Overlay
(pro spec) 1 of 1P/N:90101503888
SEGATE ST3390N Installation Overlay (non-primary) (source) 1 of 1
P/N:90008404177 SEGATE ST3390N Installation Overlay (non-primary) (distribution)
1 of 1 P/N:90008304177 SEGATE ST3390N (344Mb) Hard Drive (pro spec) 1 of
1P/N:90101504177
SEGATE ST3390N Disk Drive Definition Rev 1 (primary) (distribution) 1 of 1
P/N:90008304154 SEGATE ST3390N Disk Drive (pro spec) 1 of 1P/N:90101504054
VISION 3.1 MULTI-AUTH (REMANCO FILES ONLY) 88K (shell scripts) 1 of 1 none
VISION 3.1 MULTI-AUTH (REMANCO FILES ONLY) 68K (shell scripts) 1 of 1 none
VISION MULTI-AUTH CREDIT CARD SYSTEM REL 2.0 (pro spec) 1 of 1P/N:90101504219
25-17
EX 1-140
<PAGE>
EXHIBIT K
REMANCO
SYSTEM SUPPORT PROGRAM
Remanco's comprehensive System Support Program has been developed in response to
the needs identified by our customers. The program offers support, maintenance
and software services.
SYSTEM MAINTENANCE AGREEMENT
o Hardware Maintenance Coverage for All Remanco Equipment.
o Nationwide Field Service Technicians.
o Software Maintenance Releases and Corrective Software.
Software Support Agreement
o 24 Hour Coverage Provides Assistance When Needed.
o Trained Software Specialists Support Remanco Products Only.
Remanco International, Inc. o Company Confidential
26-1
EX 1-141
<PAGE>
SYSTEM MAINTENANCE AGREEMENT
o Remanco's equipment exchange methodology continually rebuilds your system and
maximizes the return on your original investment.
o On-site repair by Remanco field service technicians who are fully trained in
VISION Series II repair.
o Remanco's proprietary diagnostic and troubleshooting software installed on
your system to pinpoint problems quickly.
o Scheduled preventative maintenance on your system to isolate and repair
problems before they affect your business.
o Telephone support from Remanco's hardware specialists.
o Spare peripheral devices available at a discount.
o Software Maintenance Releases and corrective software for materials and
shipping charges only.
o Flexible coverage schedules that allow you to choose the amount of
coverage you want.
CUSTOMER RESPONSE CENTER
All System Support Program resources are accessed by calling Remanco's Customer
Response Center toll free number.
1-800-REMANCO
o Continuous Operations, 24 Hours per day, 265 Days a year.
o Central Coordination of All System Support Services.
o All Service Calls are monitored until completion.
o Veteran hardware and software specialists to support your system.
o Your site's service call history is stored on Remanco's on-line database for
use as a troubleshooting tool.
o CRC location in Remanco's headquarters ensures access to all of Remanco's
product support and engineering resources.
Remanco International, Inc. o Company Confidential
26-2
EX 1-142
<PAGE>
SOFTWARE SUPPORT AGREEMENT
o Support from Remanco's software specialists who are thoroughly trained on
VISION Series II software.
o Remanco's proprietary diagnostic and troubleshooting software helps
pinpoint problems quickly.
o Extended coverage options ensure that you receive assistance when you
need it.
o Immediate response to all "System Down" situations.
o Software specialists dial directly into VISION Series II systems to provide
real time support.
o Coverage 7 days a week.
Remanco International, Inc. o Company Confidential
26-3
EX 1-143
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
DISCOUNT SCHEDULE
Number of Central Multiple
Processors Invoicing Site
[**] [**] [**]
[**] [**] [**]
[**] [**] [**]
[**] [**] [**]
[**] [**] [**]
[**] [**] [**]
Corporate Express I - FOH Mail-in program: [**] off FOH list.
Corporate Express II - FOH Mail-in program: [**] off FOH/BOH list.
WARRANTY PROGRAM
RII's full system warranty provides customers complete on site hardware and
seven by 24 hour software telephone support. The warranty period is 90 days from
the date of system installation.
Remanco International, Inc. o Company Confidential
26-4
EX 1-144
<PAGE>
** CONFIDENTIAL TREATMENT HAS BEEN REQUESTED FOR CERTAIN PORTIONS OF THIS
DOCUMENT.
Authorized Distributor Territory/National Accounts
1. [**] [**]
[**] [**]
[**] [**]
[**] [**]
[**] [**]
[**] [**]
[**] [**]
2. Remanco Metropolitan, Inc. Metro New York
[**] [**]
[**] [**]
[**] [**]
[**] [**]
[**] [**]
[**] [**]
[**] [**]
[**] [**]
[**] [**]
3. [**] [**]
4. [**] [**]
5. [**] [**]
6. [**] [**]
7. [**] [**]
27
EX 1-145
<PAGE>
EXHIBIT M
DISTRIBUTION AGREEMENT
BUSINESS OUTLINE
Term: 5 years
Appointment: Remanco shall appoint MAI as an authorized reseller to sell
Remanco's Point of Sale Systems to its hospitality customers who purchase MAI's
Computerized Lodging Systems Software. MAI shall also be authorized to sell
Remanco Point of Sale Systems to gaming business through its Gaming Systems
International ("GSI") subsidiary. MAI's appointment does not include the right
to appoint subdistributors or resellers, without Remanco's permission.
Price/Discount: MAI shall purchase Remanco products at the Remanco North
American Distributor Price List, provided that for all bundled sales (POS
Systems sold with PMS solutions), Remanco will offer additional discounts based
upon number of terminals sold at levels to be determined.
Support: MAI will determine system configuration, provide warranty coverage,
provide installation and training and all software and hardware support. Remanco
shall provide secondary telephone support and standard warranty coverage to
MAI
(not to end-users).
Sales Cooperation: Remanco and MAI will recommend each other's products and
provide sales leads to each other's designated Sales Contact.
National Accounts: MAI will not sell or service Remanco products in a Remanco
Authorized Distribution ("RAD") territory without such RAD's prior approval.
Remanco Covenants: Remanco will not sell POS systems to MAI's preferred CLS
customers as specified by MAI without MAI's prior approval.
MAI Covenants: MAI will not sell POS systems to Remanco's National Accounts or
established customer base without prior approval from Remanco. Further, MAI will
not sell or service POS systems competitive with Remanco's POS systems during
the term of this Agreement, except for sales to gaming businesses by GSI.
28
EX 1-146
28