UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549

FORM 10-Q

(Mark one)
[X] Quarterly Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For the Fiscal Quarter Ended September 30, 1999

or

[  ] Transition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

GLASSTECH, INC.
(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (419)-661-9500

      Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [X] No [ ]

      The number of shares common stock, $.01 par value as of November 5, 1999 was 1,000.

Table of Contents

PART I – FINANCIAL INFORMATION

ITEM 1.    FINANCIAL STATEMENTS

      The condensed consolidated financial statements presented herein are unaudited but, in the opinion of management, reflect all adjustments necessary to present fairly such information for the periods and at the dates indicated. Since the following condensed unaudited financial statements have been prepared in accordance with Article 10 of Regulation S-X, they do not contain all information and footnotes normally contained in annual consolidated financial statements. Accordingly they should be read in conjunction with the Consolidated Financial Statements and notes thereto appearing in the Annual Report on Form 10-K for the fiscal year ended June 30, 1999, as filed with the Securities and Exchange Commission on September 23, 1999. The interim results of operations are not necessarily indicative of results for the entire year.

2

Table of Contents

GLASSTECH, INC.
CONDENSED CONSOLIDATED BALANCE SHEETS
(Dollars in thousands)
(Unaudited)

See accompanying notes.

3

Table of Contents

GLASSTECH, INC.
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(Dollars in thousands)
(Unaudited)

See accompanying notes.

4

Table of Contents

GLASSTECH, INC.
CONDENSED CONSOLIDATED STATEMENTS OF SHAREHOLDER’S EQUITY
(Dollars in thousands)
(Unaudited)

See accompanying notes.

5

Table of Contents

GLASSTECH, INC.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(Dollars in thousands)
(Unaudited)

See accompanying notes.

6

Table of Contents

GLASSTECH, INC.
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Dollars in thousands)
(Unaudited)

1.   Background and Basis of Presentation

      Effective July 2, 1997, Glasstech, Inc. (the “Company”) was acquired by Glasstech Holding Co. (“Holding”) (the “Transaction”). In connection with the Transaction, Holding, a holding company formed for the purpose of completing the Transaction, formed a wholly owned subsidiary, Glasstech Sub Co. (“Sub Co.”) which acquired all of the outstanding stock of the Company. Subsequently, Sub Co. was merged into the Company. Holding has no significant activities other than its investment in the Company. The acquisition was accounted for under the purchase method of accounting for financial reporting purposes and the purchase price was allocated to the underlying net assets acquired. The Transaction resulted in the Company having substantial goodwill and increased debt.

      In connection with accounting for the Transaction, the Company applied the provisions of Emerging Issues Task Force Issue 88-16 (EITF 88-16), whereby the carryover equity interests of certain shareholders from the “Predecessor Company” (the Company prior to the transaction) to the “Successor Company” (the Company subsequent to the Transaction) were recorded at their predecessor basis. As a result, shareholder’s equity of the Successor Company was reduced by $4,028 with a corresponding reduction to the value of goodwill acquired.

      The condensed consolidated balance sheet as of June 30, 1999 has been derived from the audited consolidated financial statements at that date but, does not include all of the information and footnotes required by generally accepted accounting principles for complete financial statements.

2.   Notes Payable and Long-Term Debt

      In connection with the Transaction, the Company issued $70,000 of 12 3/4% Senior Notes due 2004 (the “Old Notes”) in a private offering exempt from registration under the Securities Act of 1933, as amended (the “1933 Act”). The offering of the Old Notes was also structured to permit resales under Rule 144A of the 1933 Act. In connection with the issuance of the Old Notes, the Company received from Holding warrants to purchase 877 shares of common stock of Holding valued at $750. These warrants were issued to the initial purchasers of the Old Notes. On December 2, 1997, the Company consummated an exchange offer (the “Exchange Offer”) of its $70,000 Series B 12 3/4% Senior Notes Due 2004 (the “New Notes”), which were registered under the 1933 Act, for the Old Notes. The terms of the New Notes are substantially identical to the terms of the Old Notes and as used herein, will be referred to as the “Senior Notes.” Interest on the Senior Notes is payable semi-annually on each January 1 and July 1 beginning January 1, 1998. The terms of the Senior Notes do not require any scheduled principal payments prior to maturity.

      The Company also entered into a revolving credit facility (the “Credit Facility”) in connection with the Transaction. The Credit Facility provides for borrowings up to $10,000 (including standby letters of credit), subject to a borrowing base of certain qualifying assets, and provides for interest on outstanding borrowings at the LIBOR rate plus 2.5%, payable semi-annually. At September 30, 1999, the Company had no outstanding borrowings under the Credit Facility and the borrowing base approximated $6,800. The Credit Facility is available to fund working capital requirements as needed, secure standby letters of credit, which totaled $100 at September 30, 1999 and is secured by substantially all of the assets of the Company.

      The Senior Notes and Credit Facility contain numerous financial and other covenants which include the maintenance of certain levels of earnings as defined, restrictions on the payment of dividends and additional indebtedness as well as other types of business activities and investments. The Company believes that it is in material compliance with all such covenants.

7

Table of Contents

Forward-Looking Statements

      Certain statements in this Management’s Discussion and Analysis of Financial Condition and Results of Operations (“MD&A”) section and the attached financial statements, in the Company’s press releases and in oral statements made by or with the approval of an authorized executive officer of the Company constitute “forward-looking statements” as that term is defined under the Private Securities Litigation Reform Act of 1995. These may include statements projecting, forecasting or estimating the Company’s performance and industry trends. The achievement of projections, forecasts or estimates is subject to certain risks and uncertainties. Actual results and events may differ materially from those that were projected, forecasted or estimated. Applicable risks and uncertainties include general economic and industry conditions that affect all international businesses, as well as matters that are specific to the Company and the markets it serves.

      General risks that may impact the achievement of such forecasts include: compliance with new laws and regulations; significant raw material price fluctuations; currency exchange rate fluctuations; business cycles; and political uncertainties. Specific risks to the Company include the risk of recession in the international markets and industries in which its products are sold; the concentration of a significant portion of the Company’s revenues from customers whose equipment needs are located in the Asia-Pacific region (Australia, China, Indonesia, Japan, Malaysia, New Zealand, Pakistan, the Philippines, Singapore, South Korea, Taiwan, and Thailand); the concentration of a substantial percentage of the Company’s sales with a few major customers, several of whom have significant manufacturing presence in the Asia-Pacific region; the timing of new system orders and the timing of payments due on such orders; changes in installation schedules, which could lead to deferral of progress payments or unanticipated production costs; new or emerging technologies from current competitors, customers’ in-house engineering departments and others; competition from current competitors, customers’ in-house engineering departments and others; and the emergence of a substitute for glass. In light of these and other uncertainties, the inclusion of a forward-looking statement herein should not be regarded as a representation by the Company that the Company’s plans and objectives will be achieved.

      The following discussion should be read in conjunction with the financial statements and notes thereto appearing elsewhere in this report and in the Company’s Annual Report on Form 10-K for the fiscal year ended June 30, 1999, as filed with the Securities and Exchange Commission on September 23, 1999. The interim results of operations, historical results and percentage relationships set forth in this MD&A section and the financial statements, including trends that might appear, should not be taken as indicative of future operations.

General Overview

      The Company designs and assembles glass bending and tempering (i.e., strengthening) systems which are used by glass manufacturers and processors in the conversion of flat glass into safety glass. Systems are sold worldwide, primarily to automotive glass manufacturers and processors and, to a lesser extent, to architectural glass manufacturers and processors. Revenues generated by the sale of new systems are referred to below as “Original Equipment.”

      The Company has an installed base of approximately 400 systems in 45 countries on six continents. As a result of its installed base and the relatively long useful life of a system, the Company also engages in sales of aftermarket products and services (retrofit of systems with upgrades, tooling used to shape glass parts, replacement parts and technical services). Revenues generated by these types of products are referred to below as “Aftermarket.”

      In this MD&A section all dollars amounts are in thousands, unless otherwise indicated.

8

Table of Contents

Revenues

      For financial reporting purposes, the Company includes in income the ratable portion of profits on uncompleted contracts determined in accordance with the stage of completion measured by the percentage of costs incurred to estimated total costs of each contract (generally, Original Equipment, system retrofits and tooling). Unbilled amounts included in uncompleted contract receivables represent revenues recognized in excess of amounts billed. Billings in excess of costs and estimated earnings on uncompleted contracts represent amounts billed in excess of revenues recognized. Revenue from sales other than contracts (spare parts and engineering services) is recognized when the products are shipped.

Selling Expenses

      The Company maintains an in-house sales staff and uses the services of commissioned agents around the world for the sale of Original Equipment and Aftermarket products and services. In addition, the Company maintains a sales and engineering support office in the United Kingdom. The substantial majority of the Company’s Original Equipment is sold directly to the largest glass manufacturers and processors in the world or their affiliates.

Research & Development

      The Company believes it is the technological leader in the design and assembly of glass bending systems. The Company works with customers to identify product needs and market requirements. Periodically, the Company enters into joint development agreements with customers. From time to time, the Company allocates a portion of its research and development resources to complete the transition from new product development to new product introduction. When the Company does this, these expenses are charged directly to the contracts relating to the introduction of new products. The Company considers research and development expenses and new product introductions a very integral part of its future success.

Management Estimates

      The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

9

Table of Contents

Results of Operations

      The following table sets forth the amounts and the percentage of total net revenue for certain revenue and expense items for the periods indicated:

Three months Ended September 30, 1999 compared with the Three months Ended September 30, 1998

      Net revenue for the three months ended September 30, 1999 decreased $6,632, or 41.9%, to $9,194 from $15,826 for the three months ended September 30, 1998. Original Equipment revenue decreased $4,283, or 44.4%, to $5,360 for the three months ended September 30, 1999 compared to $9,643 for the three months ended September 30, 1998. This decrease in Original Equipment revenue was the result of lower new contract signings for Original Equipment in fiscal 1999 and an ensuing lower backlog at June 30, 1999 of $12,141 which was due to the continuing economic difficulties in the Asia-Pacific and other foreign regions. Aftermarket revenue decreased $2,349, or 38.0% to $3,834 for the three months ended September 30, 1999 from $6,183 for the three months ended September 30, 1998. The decrease in aftermarket revenue was primarily the result of a decline in retrofit revenue. Retrofit revenue fluctuates based on customer demand and is influenced by a variety of factors, including economic conditions and the customers’ retrofit schedules. New contract signings of approximately $20 million for the three months ended September 30, 1999 did not materially impact revenue for the period but did increase backlog 91.0% to $23,188 at September 30, 1999.

      Historically a significant portion of the Company’s net revenue is generated from customers outside the United States. However, for the three months ended September 30, 1999, Original Equipment revenue from foreign customers declined to $1,771 (33.0% of total Original Equipment revenue) as compared to $4,396 (45.6% of total Original Equipment revenue) for the three months ended September 30, 1998. For the three months ended September 30, 1999 and 1998 approximately 15.1% and 23.5%, respectively, of the Company’s net revenue was derived from sales of products to customers located in the Asia-Pacific region. The percentage of aftermarket revenue from foreign customers decreased to 50.7% of total aftermarket revenue for the three months ended September 30, 1999 compared to 71.6% for the three months ended September 30, 1998. The portion of the Company’s net revenue generated from customers outside the United States can fluctuate from time to time depending on location of contract signings.

      Gross profit decreased $2,654, or 43.7%, to $3,420 for the three months ended September 30, 1999 as compared to $6,074 for the three months ended September 30, 1998. The gross margin decreased to 37.2% from 38.4%. While the

10

Table of Contents

Company continues to reduce and minimize its production costs (including factory overhead) gross margins have decreased, in part, as a result of fixed factory overhead being applied to lower production volume.

      Selling, general and administrative expenses decreased $690, or 27.6%, to $1,807 for the three months ended September 30, 1999 as compared to $2,497 for the three months ended September 30, 1998. This decrease was primarily the result of lower incentive compensation costs due to decreased earnings and other cost containment measures implemented, including workforce reductions.

      Research and development expenses were $953 for the three months ended September 30, 1999 as compared to $967 for the three months ended September 30, 1998.

      Operating profit decreased $1,950 to ($401) for the three months ended September 30, 1999 as compared to $1,549 for the three months ended September 30, 1998. Operating profit as a percentage of revenue, was (4.4%) for the three months ended September 30, 1999 and 9.8% for the three months ended September 30, 1998. The decrease in operating profit was the result of the decline in gross profit partially offset by the decrease in selling, general and administrative expenses.

      No income tax expense or benefit has been provided in the three months ended September 30, 1999 and 1998 due to the recorded loss and the uncertainty related to the future realization of such amounts.

      Net loss was $2,778 for the three months ended September 30, 1999 compared to a net loss of $732 for the three months ended September 30, 1998. The net loss was the result of the decline in operating profit.

      EBITDA, which is defined as operating profit plus depreciation and amortization, was $1,016 for the three months ended September 30, 1999 compared to $3,015 for the three months ended September 30, 1998. The decrease in EBITDA was the result of the decline in operating profit.

Liquidity and Capital Resources

      The Company’s liquidity and capital resources were significantly impacted by the Transaction. The Company’s primary sources of liquidity are funds provided by operations and amounts available under the Credit Facility. The Senior Notes do not require any principal payments prior to maturity. The Credit Facility provides for borrowings up to $10,000 (including standby letters of credit), subject to a borrowing base of certain qualifying assets. At September 30, 1999, the Company had no outstanding borrowings under the Credit Facility and the borrowing base approximated $6,800. The Credit Facility is available to fund working capital requirements as needed, secure standby letters of credit, which totaled $100 at September 30, 1999 and is secured by substantially all of the assets of the Company. The Company is in compliance with all material covenants in the Senior Notes and Credit Facility as amended.

      Net cash provided by operating activities can vary significantly from quarter to quarter due to the number of new system signings and the amount and timing of new system payments. In most instances, progress payments on new system orders are invoiced or received in advance of revenue recognition. When progress payments are invoiced or received in advance of such revenue recognition, the Company increases current liabilities represented by its billings in excess of costs and estimated earnings on uncompleted contracts. When the revenue is earned, the Company recognizes the revenue and reduces the billings in excess of costs and estimated earnings on uncompleted contract balances. Net cash used in operating activities for the three months ended September 30, 1999 was $4,558 whereas for the three months ended September 30, 1998, net cash used in operating activities was $3,450. This increase in net cash used in operating activities for the three months ended September 30, 1999 was due in part to a lower backlog at June 30, 1999 and the timing of payments for new system signings in the three months ended September 30, 1999.

      The Company has a backlog (on a percentage of completion basis) at September 30, 1999 of $23,188 as compared to $12,141 at June 30, 1999. The Company expects to complete this backlog within the next twelve months.

11

Table of Contents

      Capital expenditures, including demonstration furnaces classified as fixed assets, were $17 for the three months ended September 30, 1999 and $11 for the three months ended September 30, 1998. Also during the first quarter of fiscal 1999 certain non-contract furnace inventory, with a value of $1,271, was transferred to demonstration furnaces. Future capital expenditures, excluding demonstration furnaces, used to replace or improve operating equipment and facilities are estimated to be less than $1,000 for the year. In addition, the Company intends to make periodic replacements and improvements on demonstration furnaces, which are used for customer demonstrations and research and development purposes. Demonstration furnaces, which outlive their usefulness for customer demonstrations or research and development purposes, or both, may be refurbished and sold or put to other applicable uses.

      As of June 30, 1999, the Company had net operating loss (“NOL”) carryforwards for regular and alternative minimum tax purposes of approximately $43,094 and $39,729, respectively, which expire in the years 2009 through 2014. These NOL’s are subject to annual usage limitations.

      Management believes that internally generated funds, together with amounts available under the Credit Facility, will be sufficient to satisfy the Company’s operating cash and capital expenditure requirements, make required payments under the Credit Facility and make scheduled interest payments on the Senior Notes. However, the ability of the Company to satisfy its obligations will ultimately be dependent upon the Company’s future operating and financial performance, including increasing contract signings, and upon its ability to renew or refinance borrowings or to raise additional equity capital as necessary. The Company’s business is subject to rapid fluctuations due to changes in the world markets for the end products produced by its equipment (largely in the cyclical markets of automobiles and construction), currency fluctuations, the local economies of those countries where users and potential users of the Company’s equipment are located, geopolitical events and other macroeconomic forces largely beyond the ability of the Company to predict or control. Except as discussed below, management is not currently aware of any trends, demands, commitments or uncertainties which will or which are reasonably likely to result in a material change in the Company’s liquidity.

      During fiscal 1998, 1999, and for the three months ended September 30, 1999 approximately 39.7%, 28.1%, and 15.1% of the Company’s net revenue was derived from sales of products to customers located in the Asia-Pacific region (Australia, China, Indonesia, Japan, Malaysia, New Zealand, Pakistan, the Philippines, Singapore, South Korea, Taiwan, and Thailand). Given the continuing significant economic uncertainties facing this region, and the impact of those uncertainties on customers’ capital expenditure plans and local demand for the products manufactured by the Company’s customers in that region, the Company cannot predict with any degree of certainty what final impact the economic issues facing the Asia-Pacific region will ultimately have on the Company’s future contract signings.

      Management believes the current economic uncertainties in the Asia-Pacific region indicate that the timing of orders for the Company’s products from this region may continue to be adversely affected in fiscal 2000. However, the impact of this situation on fiscal 2000 financial performance may be mitigated by offsetting equipment sales to customers in other regions of the world. Given the inherent difficulty in predicting with certainty the timing of contract signings and geographic areas into which equipment will be delivered in fiscal 2000 and beyond, the ultimate severity of the impact of this situation on the Company’s financial performance in fiscal 2000 and beyond is impossible to predict. The Company will continue to monitor the situation in the Asia-Pacific region. Notwithstanding the current economic conditions in the Asia-Pacific region, the Company believes that given world demographics and long term economic trends, the Asia-Pacific region will continue to represent a significant market for the Company’s products and it intends to continue its presence in this area.

Year 2000 Compliance

      Since March, 1998, the Company has had a committee reviewing issues and problems relating to potential year 2000 problems which may arise because computers, software and firmware programs, applications and information technology systems (the “IT Systems”) and items with embedded microchips (the “Non-IT Systems” and, together with the IT Systems, the “Systems”) only utilize two digits to refer to a year. The

12

Table of Contents

Company has recognized that this year 2000 problem, may cause many of the Systems to fail or perform incorrectly because they will not properly recognize a year that begins with “20” instead of the familiar “19.” If a computer system or software application used by the Company or by a third party dealing with the Company fails because of the inability of the system to properly read the year “2000,” this failure could have a material adverse effect on the Company.

      The Company’s review and assessment of the year 2000 problem has focused on four primary areas: (i) the Systems and their relationship to the Company’s operations, (ii) Glasstech systems currently being used by the Company’s customers and currently being sold by the Company, (iii) compliance by the Company’s 47 largest suppliers, and (iv) compliance by the suppliers of the Company’s building and utility systems. The Company has not incurred, and does not anticipate incurring, material costs related to year 2000 compliance.

The Systems

      The Company has completed its review of the Systems, including both the IT Systems and the Non-IT Systems. In reviewing the Systems, the Company found that some of them were not year 2000 compliant. The Company has purchased and installed upgraded versions of the IT Systems, including the software programs used for financial reporting, purchasing, order entry, payroll and product design/development that the Company has been assured are year 2000 compliant by the vendors of those programs. The majority of these upgrades were installed by December 1998 with the final upgrade completed in October 1999. The Company believes that, with the exception of one of its computer-aided design (“CAD”) systems, its manufacturing and design operations are year 2000 compliant. The Company has completed its review of the non-compliant CAD system and is expected to have an upgraded version operational during November 1999.

      Although there can be no assurance that the Company has identified and corrected, or will identify and correct, every year 2000 problem found in the Systems, the Company believes that it has a comprehensive program in place to identify and correct any such problems. The Company does have contingency plans developed in the event of a failure in any of the systems.

Glasstech Systems

      The Company assessed the year 2000 compliance of the Glasstech systems currently in service. The Company determined that the majority of the Glasstech systems currently in service should continue to operate after the year 2000; however, the internal date function on certain systems may not perform properly, which would require the end-user of a Glasstech system to make certain manual changes to the maintenance reports printed by the system. The Company has identified one type of software within certain Glasstech systems which, if not properly reset, may cause this type of Glasstech system to fail. The Company has addressed the year 2000 problems in all of the Glasstech systems currently being sold, and has put out a service bulletin on the Glasstech systems currently in service to inform customers of the problems. The Company has made software and hardware upgrades available to its customers that address these problems.

Suppliers

      The Company has completed a program to determine the year 2000 compliance efforts of its equipment and raw materials suppliers. The Company sent out questionnaires to its 47 largest suppliers and the Company has received responses from all of these suppliers. This program has not revealed any material problems. Unfortunately, the Company cannot fully control the conduct of its suppliers, and there can be no guarantee year 2000 problems originating with a supplier will not occur. The Company believes that it has made adequate arrangements with backup suppliers to avoid any material adverse effect that would occur if one of its primary suppliers were unable to fill the Company’s orders for any reason, including as a result of year 2000 problems.

Building and Utility Suppliers

      The Company has completed reviews of its building and utility systems (gas, electrical, telephone, etc.) for the impact of the year 2000 problem. These suppliers have stated they are year 2000 compliant. If the Company

13

Table of Contents

did not receive utility service from certain of these suppliers, the Company may be unable to produce Glasstech systems or take orders for new systems. While the Company continues working diligently with all of its utility suppliers and has no reason to expect that they will not be able to provide service after the year 2000, there can be no assurance that these suppliers will be able to meet the Company’s requirements. In the case of these suppliers, an acceptable contingency plan has not yet been developed. Because of the nature of these suppliers and the fact that they are often the only suppliers of a given service available in the Company’s geographic region, management believes that it may prove impossible to develop an acceptable contingency plan for certain of the building and utility systems. The failure of any such supplier to fully remediate its systems for year 2000 compliance could cause a shut down of the Company’s manufacturing and design facility, which could impact the Company’s ability to meet its obligations to supply Glasstech systems to its customers and could have a material adverse affect on the Company.

14

Table of Contents

PART II — OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

      The Company is subject to legal proceedings and claims that arise in the ordinary course of business. In the opinion of management, the amount of any ultimate liability with respect to these actions will not materially affect the financial statements of the Company.

ITEM 5. OTHER INFORMATION

      The Company may, from time to time, repurchase its Senior Notes in the open market, in privately negotiated transactions or by other means, depending on market conditions. To date, the Company has not purchased any Senior Notes.

ITEM 6. EXHIBITS AND REPORTS ON FORM 8-K

(a) Exhibits

2.1(a)		Agreement and Plan of Merger
2.2(a)		Amendment to Agreement and Plan of Merger
3.1(a)		Restated Certificate of Incorporation of the Registrant
3.2(a)		By-laws of the Registrant
4.1(a)		Indenture (including form of Note)
4.2(a)		First Supplemental Indenture
10.1(a)		Financing and Security Agreement between Bank of America, N.A. (f/k/a NationsBank, N.A.) and the Registrant
10.1.1(b)		Second Amendment to Financing and Security Agreement between Bank of America, N.A. (f/k/a NationsBank N.A.) and the Registrant
10.1.2(c)		Third Amendment to Financing and Security Agreement between Bank of America, N.A. (f/k/a NationsBank N.A.) and the Registrant
10.2(a)		Plant and Office Lease
10.3(a)		Warehouse Lease
10.4(a)		Advisory Agreement between the Registrant and Key Equity Capital Corporation
10.5(a)		Form of Exchange Agent Agreement between United States Trust Company of New York and the Registrant
10.6(a)		Employment Agreement among Glasstech Holding Co., the Registrant and John S. Baxter
10.7(a)		Employment Agreement among Glasstech Holding Co., the Registrant and Mark D. Christman
10.8(a)		Employment Agreement among Glasstech Holding Co., the Registrant and Larry E. Elliott
10.9(a)		Employment Agreement among Glasstech Holding Co., the Registrant and Ronald A. McMaster
10.10(a)		Employment Agreement among Glasstech Holding Co., the Registrant and James P. Schnabel, Jr.
10.11(a)		Employment Agreement among Glasstech Holding Co., the Registrant and Diane S. Tymiak
10.12(a)		Employment Agreement among Glasstech Holding Co., the Registrant and Kenneth H. Wetmore
10.13(a)		Securities Purchase Agreement between the Registrant, as successor to Glasstech Sub Co., and CIBC Wood Gundy Securities Corp.
10.14(a)		Registration Rights Agreement between the Registrant, as successor to Glasstech Sub Co., and CIBC Wood Gundy Securities Corp.
27.1(d)		Financial Data Schedule

(b) No reports on Form 8-K were filed during the fiscal quarter covered by this report.

15

Table of Contents

ITEM 7(a). MARKET RISK EXPOSURES

      Based on the Company’s current operations and business practices, the Company does not believe that it has any significant exposure to interest rate, foreign currency, commodity price, or equity price market risks.

16

Table of Contents

SIGNATURES

      Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

17