SI DIAMOND TECHNOLOGY INC
8-K, 1998-09-30
GENERAL INDUSTRIAL MACHINERY & EQUIPMENT
Previous: VANGUARD ADMIRAL FUNDS INC, N-30D, 1998-09-30
Next: FIRST TRUST SPECIAL SIT TR SER 43 NEB GRO & TRE SEC TR SER 2, 485BPOS, 1998-09-30



<PAGE>   1


                       SECURITIES AND EXCHANGE COMMISSION
                             Washington, D.C. 20549


                                    FORM 8-K


               CURRENT REPORT PURSUANT TO SECTION 13 OR 15(D) OF
                    THE SECURITIES AND EXCHANGE ACT OF 1934


      Date of Report (Date of Earliest Event Reported): September 14, 1998


                          SI DIAMOND TECHNOLOGY, INC.
             (Exact Name of Registrant as Specified in its Charter)

                                     Texas
                 (State or Other Jurisdiction of Incorporation)


           1-11602                                    76-0273345
     (Commission File No.)               (I.R.S. Employer Identification No.)

                            3006 Longhorn Boulevard
                                   Suite 107
                              Austin, Texas 78758
                    (Address of Principal Executive Offices)

                                 (512) 339-5020
              (Registrant's Telephone Number, Including Area Code)
<PAGE>   2



Item 5.  Other Events

     On September 14, 1998, Electronic Billboard Technology, Inc. ("EBT"), a
Delaware corporation and a wholly-owned subsidiary of SI Diamond Technology
("SIDT"), entered into a Letter of Intent setting forth the general terms and
conditions of a possible transaction under which EBT Acquisition Company ("EBT
Acquisition"), a Delaware corporation would purchase the assets and assume
certain liabilities of EBT at the price and on the terms and conditions
specified. EBT Acquisition would assume only the accounts payable incurred by
EBT in the ordinary course of business. EBT Acquisition would not assume or
become liable or responsible for any other liability, obligation or commitment
of EBT. The price to be paid for the purchased assets would be Five Million
Dollars ($5,000,000). SIDT would also have the right to acquire warrants that,
if exercised, would result in SIDT owning approximately eight (8) percent of
EBT Acquisition.


Item 7.  Financial Statements and Exhibits.

     (c)  Exhibits:

          (99.1)  Letter of Intent to the Shareholders and Board of Directors of
                  Electronic Billboard Technology, Inc., dated September 14,
                  1998.

          (99.2)  News Release, "SI Diamond Technology, Inc. Announces Letter of
                  Intent To Sell Electronic Billboard Technology, Inc.
                  Subsidiary," dated September 17, 1998.


                                   SIGNATURES

     Pursuant to the requirements of the Securities Exchange Act of 1934, the
Registrant has duly caused this report to be signed on its behalf by the
undersigned, thereunto duly authorized.


                                        SI DIAMOND TECHNOLOGY, INC.


                                        By  /s/  Douglas P. Baker 
                                          ------------------------------------
                                                 Douglas P. Baker
                                                Vice President and
                                              Chief Financial Officer

Dated: September 14, 1998

<PAGE>   1
                                                                    EXHIBIT 99.1

                            EBT ACQUISITION COMPANY
                              5535 LOCH MOOR DRIVE
                              CLARKSTON, MI 48346


                               September 14, 1998



The Shareholders and Board of Directors
Electronic Billboard Technology, Inc.
3006 Longhorn Boulevard, Suite 107
Austin, TX 78758

     In Re: Letter of Intent

Gentlemen:

     This letter summarizes the prior discussions between Electronic Billboard
Technology, Inc., a Delaware corporation (the "Seller") and EBT Acquisition
Company, a Delaware corporation (the "Buyer"), and sets forth the general
terms and conditions of a possible transaction under which Buyer would purchase
the assets and assume certain of the liabilities described below of Seller at
the price and on the terms and conditions set forth below (hereinafter referred
to as the "Transaction").

     1.  ASSETS TO BE PURCHASED.  Buyer would purchase all of the tangible and
intangible assets of Seller, including but not limited to the trade name,
customer lists, inventories of raw materials, work in process and finished
goods, machinery, equipment, tools, furniture, accounts and notes receivable,
leases, security deposits, contract rights, vehicles, software, proprietary and
product or service information and materials, licenses and permits, trademarks,
service marks, slogans, trade names (including, without limitation, the name
"Electronic Billboard Technology"), license agreements, blueprints, drawings,
telephone number(s) of the business and data and information, processes,
marketing information, manuals, technical licenses, patents and permits used in
conducting Seller's business, but excluding those assets to be designated by
Buyer on an exhibit to be attached to the Purchase Agreement referred to below
(collectively, the "Purchased Assets").

     2.  LIABILITIES TO BE ASSUMED.  The liabilities, obligations and
commitments of Seller to be assumed by Buyer are only those accounts payable
incurred by Seller in the ordinary course of business (the "Assumed
Liabilities") and Buyer shall not assume and shall not otherwise become liable
or responsible for any liability, obligation or commitment of Seller
whatsoever, either fixed or contingent, other than the Assumed Liabilities.
<PAGE>   2

September 14, 1998
Page 2



     3.  PURCHASE PRICE.  The price to be paid for the Purchased Assets would
be Five Million and No/100 Dollars ($5,000,000.00) (the "Base Consideration"),
subject to the adjustments described below (the "Purchase Price").

     4.  ESCROW AT CLOSING.  At the closing, ten percent (10%) of the Base
Consideration would be delivered by Buyer to an escrow agent, which would be a
national banking association, state-chartered bank, savings and loan
association, thrift institution or trust company determined by the mutual
agreement of Buyer and Seller, to be held by the Escrow Agent in accordance with
the terms of a mutually acceptable escrow agreement (the "Escrow Agreement").
The amount paid to the Escrow Agent would represent the "Escrow Amount" and
would be held by the Escrow Agent (i) to satisfy any indemnification liabilities
of Seller to Buyer arising out of the breach of any representation or warranty
of Seller or any other provision contained in the Purchase Agreement, and (ii)
to reimburse Buyer for the amount of any receivable of Seller which remain
unpaid more than 90 days after its creation (upon receiving reimbursement, Buyer
would convey all right, title and interest in each such receivable to Seller).
The Escrow Amount would be held until expiration of the post-closing survival
period for representations and warranties under the definitive agreement. At the
end of that period, the Escrow Amount, less any amounts for which claims had
been made by Buyer, would be delivered by the Escrow Agent to Seller. The
Purchase Agreement would contain provisions pursuant to which disputes regarding
claims against the Escrow Amount would be determined. In the event the Escrow
Amount was insufficient to satisfy Seller's indemnification or reimbursement
liabilities to Buyer, Seller would remain liable for the deficiency.

     5.  PAYMENT OF PURCHASE PRICE.  The Purchase Price (less the Escrow Amount)
would be payable by Buyer to Seller at the Closing by certified check or wire
transfer to an account designated by Seller.

     6.  PURCHASE AGREEMENT.  Upon execution of this letter, the parties would
begin to negotiate a mutually satisfactory definitive purchase agreement (the
"Purchase Agreement"). If successfully negotiated, the Purchase Agreement would
provide for the closing of the sale of the Purchased Assets as soon as
practicable after the satisfaction of the conditions to closing therein
specified. The Purchase Agreement would contain representations or warranties
by Seller and Seller's parent company, SI Diamond Technology, Inc. ("SIDT"), as
are customary in a transaction such as the Transaction, including but not
limited to representations and warranties related to the ownership and
condition of the Purchased Assets, the absence of liens or encumbrances
thereon, the absence of environmental liabilities, Seller's financials and
operating information, Seller's obligations, liabilities, contracts,
agreements, compliance with laws. The representations and warranties would
survive the closing, for the periods specified in the Purchase 


<PAGE>   3


September 14, 1998
Page 3


Agreement. The Purchase Agreement would also contain covenants of Seller and
SIDT customary for transactions of this type, including but not limited to the
operation of Seller's business in the ordinary course through the closing date.
The Purchase Agreement would obligate Seller and SIDT to indemnify Buyer for
breaches of Seller's and SIDT's representations and warranties discovered after
the closing and for obligations existing prior to closing not assumed by Buyer.

     7.  CONDITIONS.  The Purchase Agreement would specify conditions to the
obligation of Buyer to close the Transaction, including but not limited to the
following:

         a.  Buyer having successfully raised at least $7,000,000.00 in cash
     pursuant to the terms of a private placement offering of Class B common
     stock of the Buyer.

         b.  The absence of any effective injunction or restraining order
     prohibiting the Transaction.

         c.  The absence of any material adverse change in the business or
     financial condition of Seller and of any material loss or casualty to the
     Purchased Assets, since the date of the Purchase Agreement.

         d.  The truth, correctness and accuracy of Seller's representations and
     warranties as of the closing date and Seller's performance of or compliance
     with all covenants and other obligations required to be performed or
     complied with by or as of the closing date.

     8.  ACCESS.  After the execution of this Letter by the Seller, and until
the Closing of the Transaction or the termination of the Purchase Agreement in
accordance with its terms, the Seller shall provide to the Buyer and its
designees complete access to such information concerning Seller and its
business and assets as Buyer shall request, and shall permit Buyer and its
designees to conduct any examinations or investigations at such reasonable
times and upon such reasonable terms as Buyer shall request.

     9.  CLOSING.  The closing would take place as soon as possible following
execution of a Purchase Agreement between the parties, but in any event no
later than three (3) days after fulfillment of all of the closing conditions
set forth therein unless (a) the time for closing was extended by the mutual
agreement of the parties in writing, or (b) receipt of required regulatory
approvals or licenses or termination of applicable waiting periods remained
pending, in which case the time for closing would be extended until the grant
or denial of necessary approvals or licenses or the expiration of such waiting
periods.
<PAGE>   4
September 14, 1998
Page 4



     10.  CONFIDENTIALITY.  The existence of this Letter, its contents,
previous discussions between the parties regarding the possibility of the
Transaction shall not be disclosed by any party except to those officers,
employees, directors, attorneys, accountants or financial advisers who need to
know such information for the purpose of assisting such party in connection
with the subject matter and the Transaction hereby contemplated, or except as
may be required upon advice of counsel in compliance with applicable
securities laws or stock exchange regulations. The Seller and the Buyer shall
consult with the other prior to making any public announcement which may be so
required.

     11.  BINDING NATURE.  This Letter is not contractual in nature and
reflects only the intentions of the parties to proceed toward the negotiation
of a Purchase Agrement and, if the Purchase Agreement is executed and subject
to the terms thereof, the consummation of the Transaction. No party shall have
any obligation to any other party hereunder and the parties shall have only
those obligations, and shall make only those representations, warranties and
covenants, as may be set forth in the Purchase Agreement, if any, which has
been executed and delivered. No party shall have any obligation or liability
based upon or arising under this Letter to any other party by reason of the
fact that a Purchase Agreement is not prepared, authorized, executed or
delivered. Each party shall pay its own expenses and those of its accountants,
attorneys and other agents in connection with this Letter, the Purchase
Agreement, any other agreements and transactions contemplated herein, whether
or not the Transaction is consummated.

     To confirm that the foregoing accurately memorializes our previous
discussions, please sign a copy of this Letter in the space set forth below and
return it to the undersigned at 5535 Loch Moor Drive, Clarkston, MI 48346. This
Letter may be signed in counterparts, and all counterparts taken together shall
constitute the same Letter.

                                        EBT ACQUISITION COMPANY, a Delaware
                                        corporation


                                        By: /s/  Douglas P. Baker
                                            -----------------------------------

                                        Its: Secretary
<PAGE>   5
September 14, 1998
Page 5


ACCEPTED AND AGREED:

ELECTRONIC BILLBOARD TECHNOLOGY, INC.,
a Delaware corporation


By:  /s/  Marc W. Eller
    -----------------------------

Its: Chief Executive Officer

<PAGE>   1
                                                                    EXHIBIT 99.2


                                                                    NEWS RELEASE


COMPANY CONTACT
Sara Breuer, Corporate Communications Manager
SI Diamond Technology, Inc.
512.339.5020 x104


FOR IMMEDIATE RELEASE


                     SI DIAMOND TECHNOLOGY, INC. ANNOUNCES

         LETTER OF INTENT TO SELL ELECTRONIC BILLBOARD TECHNOLOGY, INC.

                                   SUBSIDIARY


AUSTIN, Texas, September 17, 1998 -- SI Diamond Technology, Inc. (OTCBB: SIDT)
announced today that it has signed a letter of intent to sell its Electronic
Billboard Technology, Inc. subsidiary for a total of approximately $5,000,000
in cash, subject to minor working capital adjustments, to EBT Acquisition
Company. SIDT will also have the right to acquire warrants that, if exercised,
would result in SIDT owning approximately 8% of EBT Acquisition Company. EBT
Acquisition Company is a newly-formed Delaware corporation. Certain Directors,
Officers, and employees of SIDT will be shareholders of EBT Acquisition
Company. The sale is contingent upon EBT Acquisition Company raising sufficient
capital to complete the transaction and the receipt of a favorable fairness
opinion to be issued by an investment banker retained by SIDT.

     SIDT will use the proceeds from this transaction to fully capitalize its
remaining subsidiary, FEPET, and buy back shares of its common stock in the
open market.

     "This transaction will be a tremendous win/win situation for both
subsidiaries. EBT is moving into a stage of needing significant capital (which
will be easier to raise as a private company) to produce and promote its
products, while FEPET is very close to becoming self sufficient," said Marc
Eller, Chairman and CEO of SI Diamond. "Furthermore, by using a significant
portion of the funds to buy back shares, SI Diamond will offset a portion of
the substantial dilution that was created by the issuance of convertible
preferred securities," added Eller.

     An SIDT investor conference call is set for Friday, September 18, 1998 at
10:30 a.m. E.S.T. to discuss this release. Interested participants should call
(719) 457-0700 five to ten minutes before the scheduled start time.

     SI Diamond Technology is a holding company consisting of two subsidiaries.
The Field Emission Picture Element Technology subsidiary utilizes SIDT's
proprietary technology for the development of diamond films for use in flat
panel displays -- the display of the future. The Electronic Billboard
Technology subsidiary is geared toward the commercialization of electronic
digitized sign technology.

                                      ###



© 2022 IncJournal is not affiliated with or endorsed by the U.S. Securities and Exchange Commission