<PAGE>
SECURITIES AND EXCHANGE COMMISSION
Washington, D. C. 20549
Form 10-K
(MARK ONE)
[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934
FOR THE FISCAL YEAR ENDED APRIL 30, 1998
OR
[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES
EXCHANGE ACT OF 1934 [FEE REQUIRED]
FOR THE TRANSITION PERIOD FROM TO
------- -------
COMMISSION FILE NUMBER: 33-67532
SHEFFIELD STEEL CORPORATION
(Exact name of registrant as specified in its charter)
DELAWARE 74-2191557
(State or other (I.R.S. Employer
jurisdiction of incorporation) identification No.)
220 NORTH JEFFERSON STREET
SAND SPRINGS, OK 74063
(Address of principal executive offices)
(918) 245-1335
(Registrant's telephone number, including area code)
SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT: NONE
---------
SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE ACT: NONE
---------
Indicate by check mark whether the registrant (1) has filed all reports
required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the
registrant was required to file such reports), and (2) has been subject to such
filing requirements for the past 90 days.
Yes [X] No [_]
Indicate by check mark if disclosure of delinquent filers pursuant to Item
405 of Regulation S-K is not contained herein, and will not be contained, to the
best of registrant's knowledge, in definitive proxy or information statements
incorporated by reference in Part III of this Form 10-K or any amendment to this
Form 10-K [ ]
As of July 7, 1998, there were 3,570,125 shares of the Registrants $.01 par
value Common Stock outstanding. The aggregate market value of voting stock held
by nonaffiliates is unknown as the Registrant's stock is not traded on an
established public trading market.
DOCUMENTS INCORPORATED BY REFERENCE
1) Portions of the Registrants Proxy Statement dated July 31, 1998 are
incorporated by reference into Part III of this Report on Form 10-K.
<PAGE>
SHEFFIELD STEEL CORPORATION
FORM 10-K
TABLE OF CONTENTS
ITEM PAGE
- ---- ----
PART I
1. Business 1-10
2. Properties 10
3. Legal Proceedings 11
4. Submission of Matters to a Vote of Security Holders 11
PART II
5. Market for the Registrant's Common Equity and Related
Stockholder Matters 11
6. Selected Financial Data 12
7. Management's Discussion and Analysis of Financial Condition
and Results of Operations 13-20
8. Financial Statements and Supplementary Data 21-38
9. Changes In and Disagreements with Accountants on
Accounting and Financial Disclosure 39
PART III
10. Directors and Executive Officers of the Registrant 39
11. Executive Compensation 39
12. Security Ownership of Certain Beneficial Owners and Management 39
13. Certain Relationships and Related Transactions 39
PART IV
14. Exhibits, Financial Statement Schedules, and Reports on Form 8-K 40
<PAGE>
PART I
------
ITEM 1. BUSINESS
- ------- --------
OVERVIEW
Sheffield Steel Corporation ("the Company") is a leading regional mini-mill
producer of hot rolled steel bar products ("hot rolled bar"), concrete
reinforcing bar ("rebar"), fabricated products, including fabricated and
epoxy-coated rebar and steel fence posts, and various types of semi-finished
steel ("billets"). The Company and its predecessors have been in the
steelmaking business for over 69 years. The Company believes that it is among
the lowest cost producers of billets in the United States as a result of its
modern melt and cast operations, high labor productivity levels, low energy
costs and competitive steel scrap costs. The Company's low cost billets serve as
the feedstock for its downstream bar mill operations and finished products. The
Company shipped approximately 490,000 tons of steel in fiscal 1998, resulting in
sales of $185.1 million.
The Company's primary manufacturing facility is located in Sand Springs,
Oklahoma (the "Sand Springs Facility"), where it conducts a full range of
steelmaking activities, including the melting and casting of billets and the
rolling of billets into rebar, steel fence posts and a range of hot rolled bar
products. The Company currently has 600,000 tons of steelmaking capacity. The
Company installed a new rolling mill (the "Rolling Mill") at the Sand Springs
Facility in 1995 which has increased productivity and efficiency in the
manufacturing of rebar and has enabled the Company to produce certain higher
quality hot rolled bar products that it was previously unable to produce. In the
fourth quarter of fiscal 1998, the Company completed a project to eliminate a
production bottleneck at the Sand Springs Facility rolling mill ("Shear Line
Project") which is expected to significantly improve hot rolled bar production.
Although the Shear Line Project will improve production for all products, it is
expected to have the most significant impact on hot rolled bar products,
specifically rounds and flats. From the Sand Springs Facility, the Company also
transfers billets to its two rolling mills in Joliet, Illinois (the "Joliet
Facility"), where it produces high-end specialty hot rolled bar products. The
Company also operates two rebar fabrication plants, one in Kansas City,
Missouri (the "Kansas City Plant") and one in Independence, Missouri
("Waddell") and a short line railroad (the "Railway Company"). The Sand
Springs Facility and the Joliet Facility received ISO 9002 quality certification
in November 1995 and June 1996.
CAUTIONARY STATEMENT REGARDING FORWARD LOOKING STATEMENTS
This Annual Report on Form 10-K may contain forward-looking statements as that
term is defined in the Private Securities Litigation Reform Act of 1995. Such
statements are based on management's current expectations and are subject to a
number of factors and uncertainties which could cause results to differ
materially from those described in the forward-looking statements. There can be
no assurance that actual results or business conditions will not differ
materially from those anticipated or suggested in such forward-looking
statements as a result of various factors, including, but not limited to, the
following: the size and timing of significant orders, as well as deferral of
orders, over which the Company has no control; the variation in the Company's
sales cycles from customer to customer; increased competition posed by other
mini-mill producers; changes in pricing policies by the Company and its
competitors; the Company's success in expanding its sales programs and its
ability to gain increased market acceptance for its existing product lines; the
ability to scale up and successfully produce its products; the potential
1
<PAGE>
for significant quarterly variations in the mix of sales among the Company's
products; the gain or loss of significant customers; shortages in the
availability of raw materials from the Company's suppliers; fluctuations in
energy costs; the costs of environmental compliance and the impact of government
regulations; the Company's relationship with its work force; the restrictive
covenants and tests contained in the Company's debt instruments, which could
limit the Company's operating and financial flexibility; and general economic
conditions.
BUSINESS STRATEGY
The Company has formulated an operating strategy to strengthen its market
position and maximize profitability which has four major components: (i) improve
finished goods product mix; (ii) continue to focus on and extend strong customer
relationships; (iii) further modernize melt shop operations; and (iv) streamline
and strengthen organizational structure.
Improve Finished Goods Product Mix. With the addition of the Rolling Mill at
the Sand Springs Facility, the Company has substantially increased its hot
rolled bar production capacity. Accordingly, shipments of finished products have
increased significantly as less profitable third party billet sales have been
diverted to the production of hot rolled bars. Billet sales, which accounted
for 23.6% of tons shipped in fiscal 1994, accounted for only 7.5% of tons
shipped in fiscal 1998. Shifting away from third party billet sales by
increasing hot rolled bar production has also increased margins and reduced
sales volatility for the Company, since hot rolled bar products are
significantly more profitable than third party billet sales and demand is more
stable. As part of its strategy to further improve product mix, in the fourth
quarter of fiscal 1998, the Company substantially completed the Shear Line
Project which, when fully integrated, is expected to (i) increase hot rolled bar
production capacity by more than 100,000 tons per year; (ii) enable the Company
to more fully utilize its existing 600,000 tons of steelmaking capacity;
(iii) improve the quality of all mill products, especially hot rolled bar; and
(iv) improve product mix by further reducing billet sales to third parties.
Progress and improvement in the operation and performance of the shear line is
dependent on the successful integration of the new equipment into existing
operations.
Extend Strong Customer Relationships. The Company benefits from having a
number of long-standing customer relationships in each of its product markets.
The Company has built a reputation for providing consistent product quality,
reliable, prompt product delivery and service, product availability and flexible
scheduling to meet customer needs and a high level of follow up technical
assistance and service. The ISO 9002 certification at both the Sand Springs
Facility and the Joliet Facility is an indication of the Company's commitment to
producing quality products. The Company believes that its business strategy to
improve its finished product mix will strengthen its existing customer
relationships and will aid it in developing new customer relationships.
Modernize Melt Shop. The Company believes that it is among the lowest cost
producers of billets in the United States as a result of its efficient melt and
cast operations, high labor productivity levels, low energy costs and
competitive steel scrap costs. With the addition of the New Rolling Mill, which
can utilize a larger billet, together with improvements in general operating
practices, yields have improved, costs have been reduced and annual billet
production capacity has increased from 525,000 tons to 600,000 tons per year.
Through incremental capital investments, the Company intends to pursue
additional modernization measures, such as the
2
<PAGE>
installation of a ladle arc furnace in the melt shop, which will further enhance
production capability, increase production capacity, reduce manufacturing costs
and improve the quality of finished products.
Streamline and Strengthen Organizational Structure. The Company has improved
strategic planning, strengthened financial reporting systems and aligned
organizational structure and management incentives with the Company's business
strategies and objectives. In accordance with the collective bargaining
agreement reached in February 1997 that resulted in a 15% workforce reduction,
the Company has been able to implement multi-craft training and use greater
flexibility in job assignments. Additional initiatives to streamline operations
include the elimination of a centralized maintenance structure and close
coordination of the melt shop, casting and rolling mill operations which have
resulted in significant reductions in both billet and finished goods
inventories. The Company has also put in place a new management team to manage
the Sand Springs Facility manufacturing operations. These initiatives have made
the Company more flexible and responsive to customer needs and positioned it to
implement its business strategy of improving finished product mix.
PRODUCTS, CUSTOMERS AND MARKETS
Hot Rolled Bar. According to the American Iron and Steel Institute
("AISI"), the size of the hot rolled bar product market in the United States
was approximately 7 million tons in 1996. The demand for consistent quality is
very significant in this market, where quality is measured by the adherence to
specifications related to chemical composition, surface quality, product
integrity and size tolerances. The Company sells a variety of specialty hot
rolled bar products, including flats, squares, rounds and channels for end use
applications that include farm equipment, auto parts, conveyor assemblies, pole
line hardware, wrenches and construction machinery. The majority of hot rolled
bar products produced at the Joliet Facility is sold directly to original
equipment manufacturers and cold drawn bar finishers, while the remainder is
sold to steel service centers. Hot rolled bar products produced at the Sand
Springs Facility are sold to both end product manufacturers and steel service
centers. For fiscal 1998, sales of hot rolled bar products accounted for
approximately 46% of the Company's total revenues.
In the hot rolled bar market, the Company differentiates itself from its
competitors through the Joliet Facility's focus on specialty products and by
targeting customers with special requirements as to bar shape, size and chemical
composition and, in many cases, small volume needs. The Company believes that
its targeted customer focus often allows it to act as the sole supplier of
particular shapes, sizes or steel chemistries to certain customers, while in
other cases it competes with a limited number of producers of specialty hot
rolled bar products. The Company believes that these niche markets are
unattractive to larger volume producers. The Company's Sand Springs Facility
provides it with a competitive geographical advantage in the south-central
United States hot rolled bar market and enables the Company's customers to
benefit from lower freight costs, shorter lead times and more timely deliveries.
As a result of these competitive advantages and its strong reputation for
quality and service, the Company has developed a number of close relationships
with the region's hot rolled bar product customers. The Company also believes
that there are significant opportunities to sell standard hot rolled bar
products to customers for whom the Joliet Facility currently satisfies specialty
hot rolled bar product requirements.
3
<PAGE>
The Company also strives to provide its hot rolled bar product customers with
superior service. To permit a high level of service consistent with efficient
production scheduling, the Company carries a large customer-designated finished
goods inventory of hot rolled bar products at both the Joliet and Sand Springs
facilities. Both the Sand Springs Facility and the Joliet Facility have
implemented an internally developed bar-coded inventory tracking system which
permits quick and precise inventories to be taken at any time. The Joliet
Facility has also developed a customer query system which provides agents and
major customers with direct computer access to the status of their production
orders, the availability of inventory designated for them and the Joliet
Facility's production schedule for their products.
Rebar. According to the AISI, the size of the rebar market in the United
States was approximately 6.3 million tons in 1996. Rebar is a lower value,
higher volume commodity bar product for which price is an important competitive
factor. Geographic proximity to customers, which in turn determines both freight
costs and delivery times, is also a critical element in the rebar market, where
profit margins are tight and independent fabricators typically depend on quick
mill response rather than their own inventories to meet ever-changing
construction schedules. The Company sells rebar to leading independent
fabricators located in the south-central United States who then shear and bend
the rebar to meet engineering or architectural specifications for construction
projects. The Company produces rebar at the Sand Springs Facility rolling mill,
where the bars are rolled in standard diameters from #4 bar (1/2 inch or 13mm)
to #18 bar (2 1/4 inches or 57mm) and sheared to standard lengths from 20 feet
to 60 feet. To provide rapid response to customer needs, the Company usually
maintains a finished goods inventory of 25,000 to 35,000 tons of rebar.
Currently, inventories are at a lower level due to the outage for installation
of the Shear Line Project during the fourth fiscal quarter. Sales of rebar
constituted approximately 34% of total Company revenues in fiscal 1998.
Rebar demand is driven by trends in commercial and industrial construction and
infrastructure investment. During periods of overall reduced steel industry
demand, the Company has maintained relatively stable rebar sales volume due to
the level of public sector investment in roads, bridges, dams, airports and
public facilities in the south-central United States. The Company has worked
successfully to build and maintain long-term relationships with its customers by
providing them with competitive pricing, assured product availability and
reliable, prompt delivery and service. This strategy permits the fabricators to
compete successfully in the construction and infrastructure markets, thus
reinforcing the Company's relationships with such fabricators.
Due to the importance of pricing, freight costs and delivery response time,
sales of rebar tend to be concentrated within close geographic proximity to a
rebar manufacturer's mini-mill. The Company's rebar market is concentrated in
the geographic area surrounding the Sand Springs Facility. In the Company's
primary market area of Oklahoma, Kansas and portions of Nebraska, Missouri,
Arkansas, and northern Texas, the Company enjoys a freight advantage over its
competitors and believes it has a market share in excess of 50%. Approximately
half of the Company's rebar shipments are made in this primary market area. The
remaining rebar shipments are made in the adjacent regions of Nebraska,
Missouri, Arkansas, Texas, Louisiana, New Mexico, and Colorado.
Fabricated Products. The Company manufactures two fabricated steel products:
fence posts, which are sold to distributors and farm cooperatives, and
fabricated rebar, including
4
<PAGE>
epoxy-coated rebar. Fabricated products sales constituted approximately 11% of
total Company revenues in fiscal 1998. Fence posts are produced in a post
fabrication shop located adjacent to the New Rolling Mill in two weights
(1.25 pounds per foot and 1.33 pounds per foot), in orange and green colors and
various lengths from 4 feet to 8 feet. The majority of the Company's fence post
sales are concentrated in the Oklahoma, Kansas, Missouri, Texas and Arkansas
market area.
Fabricated rebar is shipped from the Kansas City Plant to highway and
construction contractors in Missouri, Kansas, Nebraska and in contiguous
markets. In recent years, the Company has experienced increased demand from
contractors bidding on infrastructure projects for fabricated rebar which is
epoxy-coated prior to fabrication to protect against corrosion in the field.
This has provided the Kansas City Plant with a competitive advantage and
contributed to a growth in shipments. The Company believes that its epoxy
coating line, the only one located in the Kansas City, Missouri market, provides
a competitive advantage in securing contracts.
On October 28, 1997, the Company acquired (the "Acquisition") all of the
issued and outstanding capital stock of Waddell's Rebar Fabricators, Inc.
("Waddell"), pursuant to a Stock Purchase Agreement among the Company, Waddell
and the former stockholders of Waddell. The Acquisition purchase price consisted
of approximately (i) $1,100,000 in cash, subject to post-closing adjustment
based upon the actual net worth of Waddell on the closing date, and (ii)
secured, subordinated promissory notes (the "Notes") in an aggregate principal
amount of $2,000,000, which Notes mature in four years and accrue interest at
NationsBank's prime rate minus 1/2 of one percent per annum. The Notes are
secured by the Company's pledge of the capital stock of Waddell. Waddell is a
rebar fabricator located in Independence, Missouri which specializes in smaller
volume, higher value added construction contracts. Although the Company will
maintain Waddell as a separate subsidiary for the foreseeable future, the
Company has integrated the management of Waddell with the management of the
Company's rebar fabrication plant in Kansas City, Missouri.
Billets. The Company sells billets to other steel mills or forgers for
conversion into finished products. Sales volume potential and pricing for
billets, particularly in the spot market, is highly variable. The dominant
competitive factors are availability and price. Billet sales to third parties
are dependent on the Company's own billet requirements and market conditions
that vary widely. In the past three fiscal years, billets sales to third parties
have ranged between 4.5% and 12% of the Company's total revenues. Billet sales
constituted approximately 4.5% of total Company revenues in fiscal 1998.
The Railway Company. The Railway Company operates approximately seven miles
of mainline rail line between Sand Springs and Tulsa, Oklahoma, serving
primarily the operations of the Sand Springs Facility and, to a lesser extent,
third parties. The Railway Company's revenues from third parties are immaterial
to the financial results of the Company.
MANUFACTURING PROCESS
The Company's primary manufacturing facility is the Sand Springs Facility,
where it conducts a full range of steelmaking activities, including the melting
and casting of billets and the rolling of billets into rebar, steel fence posts
and a range of hot rolled bar products. At the Sand Springs Facility, steel
scrap is conveyed by rail car from the Company's scrap yard to the facility's
melt shop, where the steel scrap is melted with electricity in two 85-ton
electric arc
5
<PAGE>
furnaces. During the scrap melting process, impurities are removed from the
molten steel. The molten steel is then poured into a ladle, where metal alloys
are added to obtain desired chemical compositions. The molten steel is then
conveyed to a six-strand continuous caster which casts various types of billets.
The continuous caster is capable of casting billets up to 6 inches square and
50 feet long. These billets are then reheated, rolled and shaped into various
finished steel products at the Sand Springs or Joliet rolling mills or, to a
lesser extent sold to third parties. The Sand Springs rolling mill produces
rebar, "T" sections (which are further processed into fence posts), and a
range of hot rolled bar products. The rolling mills at the Joliet Facility
produce an extensive range of hot rolled bar products. A portion of the rebar
from the Sand Springs Facility is epoxy coated and/or fabricated at either the
Kansas City Facility or Waddell.
SALES AND MARKETING
Hot rolled bar products produced at the Joliet Facility are sold by the
Company's sales personnel and through commissioned sales representatives under
exclusive agency agreements with the Company. Rebar and hot rolled bar products
produced at the Sand Springs Facility are sold through the Company's own sales
force and limited sales agencies which also service the Joliet Facility. The
Company markets fence post directly to farm cooperatives and to fence post
distributors. While some billets are sold through semi-finished steel brokers on
the "spot" market, most are sold directly by the Company. As a result of
increased production capacity directly related to the completion of the Shear
Line Project, the Company expects that internal billet requirements will
increase and the availability of billets for sale to third parties will decrease
accordingly. As a result of adverse weather conditions which impact construction
activities and a normal seasonal downturn in manufacturing levels, the Company
typically experiences lower sales volumes in its third fiscal quarter.
RAW MATERIALS
The Company's primary raw material is steel scrap, which is generated
principally from industrial, automotive, demolition, railroad, obsolete, and
other sources and is purchased by the Company in the open market through a
limited number of steel scrap brokers and dealers or by direct purchase. The
cost of steel scrap is subject to market forces, including demand by other steel
producers and export volumes. The cost of steel scrap to the Company can vary
significantly, and product prices generally cannot be adjusted in the short-term
to recover large increases in steel scrap costs. Over longer periods of time,
however, product prices and steel scrap prices have tended to move in the same
direction.
The long-term demand for steel scrap and its importance to the domestic steel
industry may be expected to increase as mini-mill producers continue to expand
steel scrap-based electric arc furnace capacity with additions to or
replacements of existing integrated facilities. For the foreseeable future,
however, the Company believes that supplies of steel scrap will continue to be
available in sufficient quantities. In addition, a number of technologies exist
for the processing of iron ore into forms which may be substituted for steel
scrap in electric arc furnace-based steelmaking. Such forms include direct-
reduced iron, iron carbide, hot-briquette iron and pig iron. A sustained
increase in the price of steel scrap could result in increased use of these
alternative materials. The Company has successfully employed scrap substitutes
in its manufacturing process to achieve quality characteristics and expects to
increase its usage of such substitutes in the future.
6
<PAGE>
ENERGY
The Company's manufacturing process in Sand Springs consumes large amounts of
electricity. The Company purchases its electrical needs at the Sand Springs
Facility from Public Service of Oklahoma ("PSO") under a real time pricing
tariff which is available only to PSO's largest customers. Under this tariff,
the Company purchases its base load at a contracted amount adjusted for fuel
costs and then purchases or sells power on an hour-by-hour basis at rates which
approximate PSO's incremental costs plus a small markup. Historically, the
Company has been adequately supplied with electricity and does not anticipate
any material curtailment in its operations resulting from energy shortages.
The Company believes that its utility rates from PSO are among the lowest in
the domestic mini-mill steel industry. PSO is able to generate electricity at
relatively low rates, as its electric load is generated using western coal and
local natural gas as compared to the higher costs of electric utilities that
generate electric load using oil or nuclear power.
The Company also uses natural gas to reheat billets, but is not considered a
large natural gas user. Since deregulation of the natural gas industry, natural
gas requirements generally have been provided through negotiated contract
purchases of well-head gas with supplemental transportation through local
pipeline distribution networks. Although increases in the price of natural gas
might have an adverse impact on the Company's cost structure, any such price
increase would likely have a similar affect on competitors using natural gas
and/or electricity generated by natural gas. The majority of the Company's
natural gas needs (both to reheat billets and as a consumer of the electricity
generated by natural gas) are at the Sand Springs Facility in Oklahoma, a state
with excess natural gas supplies. Historically, the Company has been adequately
supplied with natural gas and an adequate supply is expected to be available in
the future.
COMPETITION
The Company competes with a number of domestic mini-mills in each of its
market segments. There are common competitive factors in the steel bar business
- --price, proximity to market, quality and service, for example--although their
relative importance varies in the different market segments.
In the market for hot rolled bar products, the Joliet Facility occupies a
niche position at the specialty end of the product range. The Company believes
that it is the sole supplier of several particular shapes, sizes or steel
chemistries to certain customers. In other cases, the Company competes with a
limited number of other producers of specialty hot rolled bar products,
including Kentucky Electric Steel Incorporated, Calumet Steel Company, Laclede
Steel Company and Northwestern Steel and Wire Company. From Sand Springs and to
a much lesser degree from Joliet, the Company competes with mini-mill producers
of standard hot rolled bar products, including Chaparral Steel Company, North
Star Steel Company and Structural Metals, Incorporated. Competitors vary from
customer to customer depending on product specifications and requirements for
order sizes and inventory support.
Since pricing, freight costs and delivery times are the most important
competitive factors in the sale of rebar, sales tend to be concentrated within
about 350 miles of a mini-mill. In the
7
<PAGE>
south-central United States, the Company believes it enjoys a competitive
advantage as the closest mill serving an area comprising Oklahoma, Kansas,
western Missouri and Arkansas, and parts of northern Texas. The majority of the
Company's rebar tonnage was shipped to this area in fiscal 1998. The Company
competes in the rebar market with a number of other mini-mills, principally
Chaparral Steel Company and Structural Metals, Incorporated.
The Company is not in competition on a regular basis with foreign or
integrated steel producers. These mills have cost and freight disadvantages
compared to the Company and other domestic mini-mills which have effectively
precluded them from competing in the relatively low priced hot rolled bar
product and rebar markets.
Competitive factors in fence post sales include product quality measured by
durability, appearance, workmanship, delivery response time, price, and freight
costs. Competitors include Structural Metals, Incorporated and Chicago Heights
Steel Company.
For fabricated rebar, primary competitors are independent fabrication shops
which are furnished with rebar from other mini-mills in the Midwest. In recent
years, the Company believes that increased demand for epoxy-coated product from
contractors bidding on infrastructure projects has provided the Kansas City
Plant with a competitive advantage and contributed to growth in shipments. Other
competitive factors include delivery performance, engineering support, accurate
fabrication and competitive pricing. Waddell's focus is on small rebar
projects, generally under 200 tons each.
EMPLOYEES
As of April 30, 1998, there were approximately 623 employees of the Company.
Approximately 69% of the Company's employees are represented by one of three
bargaining units affiliated with the United Steelworkers of America (Sand
Springs, Joliet and Kansas City facilities). The Sand Springs Facility is party
to a collective bargaining agreement covering approximately 265 hourly-paid
production and maintenance employees. This agreement, which was negotiated as of
March 2, 1997, is for a three year period expiring on March 1, 2000. The
agreement included wage increases, certain benefit increases and changes to
local work rules. The agreement also allowed the Company to reduce and
reorganize its hourly workforce by approximately 70 positions, primarily
maintenance related. Of the 70 positions, 42 were eliminated through retirement
offers effective June 1, 1997 and the remaining positions have been eliminated
through attrition.
The Joliet Facility is also party to a collective bargaining agreement
covering approximately 148 hourly-paid production and maintenance employees,
which expires on March 1, 1999, and the Kansas City Plant has a collective
bargaining agreement covering approximately 20 employees which expires on
October 31, 1999. The Railway Company has approximately 14 employees who are
represented by various labor unions. The Company believes that it has maintained
good relationships with its labor unions in the past, but there can be no
assurance that the terms of any future collective bargaining agreements with any
labor unions will contain terms comparable to the terms contained in its
existing collective bargaining agreements.
Since the last national, industry-wide strike of steelworkers in 1959, the
Company has experienced only a five-day strike at the Sand Springs Facility in
May 1988 and a work stoppage
8
<PAGE>
at the Kansas City Plant after the expiration of its collective bargaining
agreement in September 1991. The Company has not experienced a protracted work
stoppage at either the Sand Springs Facility or the Joliet Facility, and
believes that it has good relations with its employees, but there can be no
assurance that work stoppages will not occur in the future, in connection with
labor negotiations or otherwise.
ENVIRONMENTAL COMPLIANCE
The Company is subject to a broad range of Federal, state and local
environmental requirements, including those governing air emissions and
discharges into water, and the handling and disposal of wastes. The Company has
spent substantial amounts to comply with these requirements. In addition, in the
event of a release of hazardous materials generated by the Company, the Company
could potentially be responsible for the remediation of contamination associated
with such a release.
Primarily because the melting process at the Sand Springs Facility generates
emission dust that contains lead, cadmium and other heavy metals, the Company is
classified, in the same manner as other similar mini-mills in its industry, as a
generator of hazardous waste. The Resource Conservation and Recovery Act of
1976, as amended ("RCRA"), regulates the management of emission control
sludge/dust from electric arc furnaces ("K061"), a waste stream generated in
significant quantities at the Sand Springs Facility. All of the K061 generated
at the Sand Springs Facility is shipped to Mexico, where a High Temperature
Metals Recovery processor, Zinc Nacional, S.A., recovers the zinc, lead and
cadmium and manufactures commercial and high purity zinc products. If a release
of K061 were to occur, the Company could be required to remediate such release.
Although current law permits the export of K061, there can be no assurance that
new United States legislation prohibiting the export of hazardous waste
materials or new Mexican legislation prohibiting the import of such materials,
including K061, will not be enacted. In that event, the Company would have to
find an alternative means of treatment or disposal of the K061 in compliance
with RCRA. The Company believes that it could properly dispose of the K061
generated at the Sand Springs Facility by constructing an on-site recovery or
chemical stabilization process or by shipping the K061 to a licensed domestic
treatment facility. However, there can be no assurance as to the availability of
such alternatives or that their construction and/or use would not result in
significant cost increases.
In accordance with the Clean Air Act Amendments of 1990 ("CAAA") and
Oklahoma's State Implementation Plan, the Sand Springs Facility submitted a
Title V application for an operating permit in January 1997 and received the
permit in March, 1998. One compliance audit has occurred since then, with no
resulting violations or outstanding issues. Additional or new air emission
control regulations or requirements applicable to the Company's operations may
be promulgated under the Clean Air Act in the future. The Company cannot at this
time accurately estimate the costs, if any, of compliance with such future Clean
Air Act regulations or requirements.
It is possible that EPA may identify violations of RCRA requirements as a
result of the Compliance Evaluation Inspection conducted by EPA at the Sand
Springs Facility in April 1997, and that EPA may seek penalties and/or
corrective action relating to the Solid Waste Management Units identified at the
Sand Springs Facility, including the three previously closed K061 landfills.
While the Company believes that any such RCRA violations that may be
9
<PAGE>
identified by EPA will not result in penalties which will have a material
adverse effect on the Company's results of operations or financial condition,
the costs of corrective action (if any is required) cannot be predicted at this
time and may be material. Apart from the issues associated with the April 1997
RCRA inspection conducted by EPA, the Company believes that it is currently in
substantial compliance with applicable environmental requirements and does not
anticipate the need to make substantial expenditures for environmental control
or remediation measures during the next three years.
ITEM 2. PROPERTIES AND FACILITIES
- ------- -------------------------
The Company owns the properties comprising the Sand Springs Facility, the
Joliet Facility, and Waddell. The Sand Springs Facility is located on
approximately 148 acres of land in Sand Springs, Oklahoma. The Joliet Facility
is located on approximately 30 acres of land in Joliet, Illinois. Waddell's
33,000 square feet building is located on approximately 2.1 acres of land in
Independence, Missouri. The Company leases 9 acres of land adjacent to the
Joliet Facility from the Metropolitan Water Reclamation District of Greater
Chicago under a long term lease expiring in 2053. The Company also leases the
Kansas City Plant, containing approximately 77,100 square feet. In addition, the
Company owns 4.5 acres of land in Oklahoma City, Oklahoma that formerly
comprised the Oklahoma City Mill.
The Sand Springs Facility comprises an aggregate of approximately 520,390
square feet of floor space and contains two 85-ton electric arc furnaces, a six
strand billet continuous caster, a rolling mill, two warehouses and a fence post
shop. The current total annual capacity of the Sand Springs Facility is
approximately 600,000 tons of billet, approximately 450,000 tons of rebar and
hot rolled bar and approximately 70,000 tons of fence post.
The Joliet Facility comprises an aggregate of approximately 334,305 square
feet of floor space and contains a 12 inch merchant bar mill and a 10 inch
merchant bar mill. The total annual capacity of the Joliet Facility is
approximately 155,000 tons of hot rolled bar products.
The Railway Company provides freight service between Sand Springs and Tulsa on
seven miles of mainline track and 21 miles of spur line which connect customer
facilities with the main line. The Railway Company owns the mainline track and
three locomotives and operates a maintenance shop for normal repairs and upkeep.
The Railway Company own approximately 10 acres and leases and operates a
transload facility and warehouse.
The Railway Company has granted a security interest in substantially all of
its assets to the Bank of Oklahoma as security for the Railway Company's
obligations under the Railway Revolving Credit Facility and the Railway Term
Loan.
The Company has granted a first priority lien on substantially all of
Sheffield's real property and equipment in favor of the Trustee for the benefit
of the holders of the First Mortgage Notes.
10
<PAGE>
ITEM 3. LEGAL PROCEEDINGS
- ------- -----------------
The Company is not a party to any significant pending legal proceedings other
than litigation incidental to its business which the Company believes will not
materially affect its financial position or results of operations. Such claims
against the Company are ordinarily covered by insurance. There can be no
assurance, however, that insurance will be available in the future at reasonable
rates.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
- ------- ---------------------------------------------------
Not applicable.
PART II
-------
ITEM 5. MARKET FOR REGISTRANT'S COMMON STOCK AND RELATED
- ------- ------------------------------------------------
STOCKHOLDER MATTERS
-------------------
The Company's Common Stock, par value $.01 per share, is not traded on an
established public trading market. As of the date of this filing, there were
nine stockholders of record. The Company paid dividends of $10,000,000, or
$2.80 per share, to stockholders in fiscal 1998. There were no dividends paid
during the year ended April 30, 1997. Certain of the Company's loan agreements
contain limitations on the ability of the Company to pay cash dividends on
Common Stock.
11
<PAGE>
ITEM 6. SELECTED FINANCIAL DATA
- ------ -----------------------
The following selected consolidated financial data for the five years ended
April 30, 1998 has been derived from the Company's financial statements audited
by KPMG Peat Marwick LLP, independent auditors. The Company's financial
statements and the report thereon are included elsewhere in this Annual Report
on Form 10-K. The information below should be read in conjunction with the
Company's financial statements and the related notes thereto and "Management's
Discussion and Analysis of Financial Condition and Results of Operations,"
included in Item 7.
<TABLE>
<CAPTION>
(Dollars in thousands except per share and per ton data)
Fiscal Year Ended April 30,
-----------------------------------------------------------
1994 1995 1996 1997 1998
<S> <C> <C> <C> <C> <C>
STATEMENT OF EARNINGS DATA:
Sales..................................................... $165,920 $175,753 $172,317 $170,865 $185,077
Cost of sales............................................. 141,215 144,385 143,121 140,234 148,496
-------- -------- -------- -------- --------
Gross profit.............................................. 24,705 31,368 29,196 30,631 36,581
Selling, general and administrative expense............... 10,682 12,156 11,737 11,923 13,006
Depreciation and amortization............................. 4,941 5,930 6,567 6,775 7,112
Postretirement benefit expense other
than pensions......................................... 4,248 3,153 2,776 2,353 2,681
Restructuring charge [a].................................. - - - 1,320 -
-------- -------- -------- -------- --------
Operating income (loss)................................... 4,834 10,129 8,116 8,260 13,782
Interest expense.......................................... (7,147) (8,049) (11,733) (11,769) (12,300)
Other income (expense).................................... (40) (58) 526 - (180)
-------- -------- -------- -------- --------
Income (loss) before income taxes and
extraordinary item.................................... (2,353) 2,022 (3,091) (3,509) 1,302
Income tax (expense) benefit.............................. 949 (197) - - 495
-------- -------- -------- -------- --------
Income (loss) from continuing operations.................. (1,404) 1,825 (3,091) (3,509) 1,797
Extraordinary item - loss on retirement of
long-term debt, net of income tax benefit
of $1,346 and $0 in 1994 and 1998, respectively....... (3,966) - - - (8,023)
-------- -------- -------- -------- --------
Net income (loss)......................................... $ (5,370) $ 1,825 $ (3,091) $ (3,509) $ (6,226)
======== ======== ======== ======== ========
EARNINGS PER SHARE: [b]
Basic:
Income (loss) from operations before extraordinary item... $ (.42) $.54 $ (.92) $ (1.04) $ .53
Net income (loss)......................................... (1.60) .54 (.92) (1.04) (1.82)
Diluted:
Income (loss) from operations before extraordinary item... $ (.42) $.52 $ (.92) $ (1.04) $ .47
Net income (loss)......................................... (1.60) .52 (.92) (1.04) (1.64)
DIVIDENDS PER COMMON SHARE................................. $ .15 $.18 $ .52 $ - $ 2.80
BALANCE SHEET DATA (AT END OF PERIOD):
Total assets.............................................. $115,958 $146,459 $143,182 $136,627 $143,618
Long-term debt (including current portion)................ 72,629 93,170 97,041 96,550 114,384
Stockholders' equity...................................... 10,558 11,395 6,385 2,156 (14,126)
OTHER DATA:
Capital expenditures...................................... $ 1,667 $ 24,220 $ 4,978 $ 3,695 $ 9,023
Net tons shipped.......................................... 519,043 500,151 477,005 473,755 490,128
Average price per ton shipped............................. $ 314 $ 351 $ 361 $ 361 $ 378
Average production cost per ton shipped................... 271 290 300 296 303
Number of active employees at end of period............... 708 718 705 670 623
Ratio of earnings to fixed charges [c].................... - 1.19 - - 1.10
</TABLE>
- -----------------------------------
[a] A restructuring charge of $1.3 million was recognized in fiscal 1997 as a
result of early retirement incentives included in a collective bargaining
agreement and salaried workforce reductions in Sand Springs.
[b] Earnings per share have been restated for all periods presented to reflect
the adoption of Statement of Financial Accounting Standards No. 128,
"Earnings Per Share". See Note 1 of Notes to Consolidated Financial
Statements.
[c] Ratio of earnings to fixed charges is defined as income before income
taxes, extraordinary item, and cumulative effect of change in accounting
principle plus amortization of debt issuance cost and interest expense
divided by the sum of interest expense plus amortization of debt issuance
costs. Earnings were insufficient to cover fixed charges in 1993, 1994,
1996 and 1997 by approximately $10,503, $2,353, $3,091 and $3,509,
respectively.
12
<PAGE>
ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL
- ------- -------------------------------------------------
CONDITION AND RESULTS OF OPERATIONS
-----------------------------------
The following discussion should be read in conjunction with the Consolidated
Financial Statements of the Company and the notes thereto included in item 8 of
this Form 10-K.
GENERAL
The Company's products are grouped into four categories: (i) hot rolled bar
products, which the Company produces in the form of flats, squares, rounds and
channels, typically to meet specified customer requirements; (ii) rebar, which
is principally sold to independent fabricators who shear and bend the rebar to
meet engineering or architectural specifications for construction projects;
(iii) fabricated products, consisting of fence post (sold principally to
distributors and farm cooperatives) and fabricated rebar, including epoxy-coated
rebar (typically sold to highway and construction contractors); and (iv)
billets, made by casting molten steel into square strands of various lengths in
a continuous casting process, which are either reheated, rolled and sheared by
the Company into various finished steel products described above or sold to
third parties. The Company's strategy includes improving its product mix by
utilizing billets in production instead of selling billets to third parties. The
Company's cost components are ferrous scrap, energy, labor, warehousing and
handling, and freight costs. The following table gives summary operating data
for the Company by its principal product categories for the periods indicated:
<TABLE>
<CAPTION>
Fiscal Year Ended April 30,
------------------------------------------------------------------
1994 1995 1996 1997 1998
------------ ------------ ------------- ----------- ----------
<S> <C> <C> <C> <C> <C>
TONS SHIPPED:
Hot Rolled Bars....................... 154,362 157,610 159,688 174,290 185,700
Rebar................................. 193,475 161,198 169,316 185,745 212,159
Fabricated Products................... 48,526 48,325 54,444 53,208 55,511
-------- -------- -------- -------- --------
Total finished products............... 396,363 367,133 383,448 413,243 453,370
Billets............................... 122,680 133,017 93,557 60,512 36,758
-------- -------- -------- -------- --------
Total tons shipped.................... 519,043 500,150 477,005 473,755 490,128
======== ======== ======== ======== ========
PRICE PER TON:
Hot Rolled Bars....................... $ 424 $ 462 $ 461 $ 435 $ 456
Rebar................................. 263 290 293 292 297
Fabricated Products................... 407 447 461 460 468
Billets............................... 218 236 225 214 229
Average price per ton shipped......... 320 351 361 361 378
Average production cost per ton....... 272 289 300 296 303
</TABLE>
On March 2, 1997, the Company completed negotiation of a collective bargaining
agreement with the United Steelworkers of America which covered approximately
315 hourly-paid production and maintenance employees at the Sand Springs
Facility. The new contract is for a term of three years, expiring March 1, 2000.
This collective bargaining agreement included wage increases, certain benefit
increases and changes to local work rules allowing greater flexibility. The
contract also allowed the Company to reduce and reorganize its hourly workforce
by approximately 70 hourly positions, primarily maintenance related. Of the 70
positions, 42 employees were eliminated through retirement offers effective
June 1, 1997 and the remaining positions have been eliminated through attrition.
13
<PAGE>
RESULTS OF OPERATIONS
FISCAL 1998 AS COMPARED TO FISCAL 1997
SALES. Sales for the Company for fiscal 1998 were approximately $185.1
million as compared to sales of approximately $170.9 million for fiscal 1997, an
increase of approximately $14.2 million or 8.3%. The increase was primarily the
result of an increase in the tons shipped from 473,755 to 490,128, as well as an
increase in the average price per ton shipped from $361 to $378 per ton. The
Company experienced increased shipments and sales prices in all product lines
with the exception of billets.
Hot Rolled Bar Products. Shipments in fiscal 1998 were 185,700 tons compared
to 174,290 tons in fiscal 1997, an increase of 11,410 tons or 6.6%. Shipments of
hot rolled bars produced at the Sand Springs Facility were up approximately 5.3%
in fiscal 1998 over the previous year due to continued improvements in operation
of the New Rolling Mill and the Company's implementation of its business
strategy to improve finished product mix. The Joliet Facility also increased
shipments of hot rolled bar due primarily to improved market conditions over the
prior fiscal year. The average price per ton for hot rolled bar products
increased to $456 per ton in fiscal 1998 from $435 per ton in fiscal 1997. The
increase in average price per ton is due to increases in prices at both the
Joliet Facility and the Sand Springs Facility.
Rebar. Rebar shipments for fiscal 1998 were 212,159 tons as compared to
185,745 tons in fiscal 1997, an increase of 26,414 tons or 14.22%. The increase
in tons shipped was primarily due to strong market demand. The average price
per ton for rebar increased to $297 for fiscal 1998 from $292 per ton in fiscal
1997.
Fabricated Products. Shipments of fabricated products in fiscal 1998 were
55,511 tons, up from 53,208 tons in fiscal 1997. Shipments of fabricated
products from the Kansas City Plant decreased slightly. However, due to the
acquisition of Waddell, total shipments for the Kansas City area market
increased approximately 6.8%. Shipments of fence posts increased slightly from
the prior year due to market demand and improved production rates. The average
price per ton for fabricated products increased to $468 per ton in fiscal 1998
from $460 per ton in fiscal 1997 due to the addition of Waddell, which
specializes in smaller volume, higher value added construction contracts.
Billets. Shipments of billets to third parties for fiscal 1998 were 36,758
tons as compared to 60,512 tons in fiscal 1997. The decrease of 23,754 tons or
39.3% was due to the Company's continuing implementation of its business
strategy to utilize billets internally for the production of higher value added
finished products instead of selling billets to third parties. The average price
per ton for billets increased to $229 per ton in fiscal year 1998 from $214 per
ton in fiscal 1997. The increase in the average price per ton of billets was
due to selling a lower proportion of commodity grade steel.
COST OF SALES. The cost of sales for fiscal year 1998 was approximately
$148.5 million as compared to approximately $140.2 million for the fiscal year
ended 1997. Cost of sales on an average per-ton basis increased from the prior
year to $303 from $296. The increase was due to an increase in scrap raw
material costs and an increase in the mix of finished steel product sales. In
fiscal 1998, billet shipments decreased 23,754 tons and the decrease of these
lower cost products in the mix caused the average cost per ton to increase.
14
<PAGE>
GROSS PROFIT. Gross profit for fiscal 1998 was approximately $36.6 million
as compared to approximately $30.6 million for fiscal 1997, an increase of
approximately $6.0 million or 19.4%. Gross profit as a percentage of net sales
for fiscal 1998 was 19.8% as compared to 17.9% for fiscal 1997. The increase in
gross profit in fiscal 1998 is primarily due to the increase in sales prices as
well as an increase in the sales mix of higher margin products.
SELLING, GENERAL AND ADMINISTRATIVE EXPENSE. Selling, general and
administrative expense for fiscal 1998 was approximately $13.0 million,
reflecting an increase of approximately $1.1 million from 1997 levels. This
increase is due to the addition of Waddell, additional environmental consulting
expenditures and payments on performance incentive plans.
DEPRECIATION AND AMORTIZATION. Depreciation and amortization for 1998 was
approximately $7.1 million as compared to approximately $6.8 million for 1997,
an increase of approximately $0.3 million or 5.0%. The increase in depreciation
expense was primarily the result of depreciation on capital expenditures made in
both fiscal 1997 and 1998. In addition, amortization expense increased as a
result of increased intangible assets associated with the acquisition of Waddell
and debt issuance costs.
POST-RETIREMENT BENEFIT EXPENSE. Post-retirement benefit expense increased
to approximately $2.7 million for fiscal 1998 from approximately $2.4 million in
1997. The increase is primarily due to a decrease in the discount rate as
determined by an independent actuary.
OPERATING INCOME. Operating income was approximately $13.8 million for
fiscal 1998 as compared to operating income of approximately $8.3 million for
fiscal 1997, an increase of approximately $5.5 million or 66.9%. Operating
income as a percentage of sales for fiscal 1998 was 7.4% as compared to 4.8% for
fiscal 1997. The increase is a result of higher gross profit as described above,
offset by higher administrative, depreciation and amortization and post-
retirement expenses.
INTEREST EXPENSE. Interest expense for fiscal 1998 was approximately $12.3
million as compared to approximately $11.8 million for fiscal 1997. The
increase is a result of the level of outstanding debt during the fiscal year.
FISCAL 1997 AS COMPARED TO FISCAL 1996
SALES. Sales for the Company for fiscal 1997 were approximately $170.9
million as compared to sales of approximately $172.3 million for fiscal 1996, a
decrease of approximately $1.5 million or 0.8%. This decrease was primarily the
result of a decrease in the tons shipped from 477,005 to 473,755, as the average
price per ton shipped remained unchanged at $361 per ton. The decrease in sales
was primarily a result of decreased shipments of billets.
Hot Rolled Bar Products. Shipments in fiscal 1997 were 174,290 tons compared
to 159,688 tons in fiscal 1996, an increase of 14,602 tons or 9.1%. Shipments of
hot rolled bars produced at the Sand Springs Facility were up approximately 66%
in fiscal 1997 over the previous year due to continued improvements in operation
of the New Rolling Mill and the Company's implementation of its business
strategy to improve finished product mix. This increase was partially offset by
decreased sales of hot rolled bar products from the Joliet Facility which were
primarily due to weak market conditions. The average price per ton for hot
rolled bar products decreased to $435 per ton in fiscal 1997 from $461 per ton
in fiscal 1996. The decrease in
15
<PAGE>
average price per ton is due to the increased proportion of the Company's hot
rolled bar products being produced at the New Rolling Mill at the Sand Springs
Facility which have a lower selling price than the more specialized products
produced at the Joliet Facility.
Rebar. Rebar shipments for fiscal 1997 were 185,745 tons as compared to
169,316 tons in fiscal 1996, an increase of 16,429 tons or 9.7%. The increase in
tons shipped was primarily due to increased production. Rebar shipments in the
previous year were limited because mill time was allocated to the development of
new hot rolled bar business in accordance with the Company's business strategy
to improve product mix. The average price per ton for rebar decreased to $292
for fiscal 1997 from $293 per ton in fiscal 1996.
Fabricated Products. Shipments of fabricated products in fiscal 1997 were
53,208 tons, down from 54,444 tons in fiscal 1996. Shipments of fabricated
products from the Kansas City Plant decreased from the prior year, primarily due
to weak market demand in the fourth quarter. Shipments of fence posts were
consistent with the prior year. The average price per ton for fabricated
products decreased slightly to $460 per ton in fiscal 1997 from $461 per ton in
fiscal 1996.
Billets. Shipments of billets to third parties in fiscal 1997 were 60,512
tons as compared to 93,557 tons in fiscal 1996. The decrease of 33,045 tons or
35.3% was due to the Company's implementation of its business strategy to
utilize billets internally for the production of higher value added finished
products instead of selling billets to third parties. The average price per ton
for billets decreased to $214 per ton in fiscal year 1997 from $225 per ton in
fiscal 1996. The decrease in the average price per ton of billets was partially
due to weak market demand and partially due to selling a higher proportion of
commodity grade steel.
COST OF SALES. The cost of sales for fiscal year 1997 was approximately
$140.2 million as compared to approximately $143.1 million for the fiscal year
ended 1996. Cost of sales on an average per-ton basis decreased slightly from
the prior year to $296 from $300. The decrease in cost of sales per ton is due
to improved production rates and a decrease in scrap raw material costs from the
prior year. The decrease was partially offset by slightly higher conversion
costs per ton in both the melt shop and the New Rolling Mill due to an electric
furnace transformer failure and higher energy costs in comparison to the prior
year. Although the electric furnace transformer failure curtailed melt shop
operations by approximately 40% for a four month period, the Company purchased
billets from third party suppliers and met its finished product requirements.
The Company's relationships with its customers were not disrupted and the
Company's insurance policy covered its costs of purchasing billets and repairing
the transformer.
GROSS PROFIT. Gross profit in fiscal 1997 was approximately $30.6 million as
compared to approximately $29.2 million in fiscal 1996, an increase of
approximately $1.4 million or 4.9%. Gross profit as a percentage of net sales
for fiscal 1997 was 17.9% as compared to 16.9% for fiscal 1996. The increase in
gross profit in fiscal 1997 is due to the decrease in cost of sales and the
increase in sales as discussed above.
SELLING, GENERAL AND ADMINISTRATIVE EXPENSE. Selling, general and
administrative expense for fiscal 1997 was approximately $11.9 million,
reflecting an increase of approximately $0.2 million from 1996 levels. This
increase is due to additional selling expenses related to the expanded sales
efforts for hot rolled bar products.
DEPRECIATION AND AMORTIZATION. Depreciation and amortization for 1997 was
approximately $6.8 million as compared to approximately $6.6 million for 1996,
an increase of
16
<PAGE>
approximately $0.2 million or 3.2%. The increase in depreciation expense was
primarily the result of depreciation on capital expenditures made in both fiscal
1996 and 1997.
POST-RETIREMENT BENEFIT EXPENSE. Post-retirement benefit expense decreased
to approximately $2.4 million for fiscal 1997 from approximately $2.8 million in
1996. The decrease is primarily due to a decrease in the health care cost trend
rates as determined by an independent actuary.
RESTRUCTURING EXPENSE. A restructuring charge of $1.3 million, $1.0 million
of which was non-cash, was recognized in fiscal 1997 as a result of early
retirement incentives included in a collective bargaining agreement and salaried
workforce reductions in Sand Springs.
OPERATING INCOME. Operating income was approximately $8.3 million for fiscal
1997 as compared to operating income of approximately $8.1 million for fiscal
1996, an increase of approximately $0.1 million or 1.8%. Operating income as a
percentage of sales for fiscal 1997 was 4.8% as compared to 4.7% for fiscal
1996. The slight increase is a result of higher gross profit as described above,
offset by higher administrative expenses and the restructuring charge as
explained above.
INTEREST EXPENSE. Interest expense for fiscal 1997 was approximately $11.8
million as compared to approximately $11.7 million for fiscal 1996.
LIQUIDITY AND CAPITAL RESOURCES
As of April 30, 1998, the Company's long term indebtedness was $114.4 million.
The Company had approximately $29.6 million of borrowing availability at
April 30, 1998 under its revolving credit agreements and approximately
$4 million available under an equipment financing agreement. The Company was in
compliance with its debt covenants under its long-term debt instruments as of
April 30, 1998.
Borrowings under the revolving credit agreements bear interest at a floating
rate. To the extent that such interest rate increases, and to the extent that
amounts outstanding under the revolving credit agreements increase, there will
be corresponding increases in the Company's interest obligations. In addition
to borrowings under the revolving credit agreements, the Company has
historically used cash flow from operations and equipment financing agreements
to fund its investing activities, including capital expenditures.
On November 26, 1997, the Company offered an aggregate of $110,000,000 of
First Mortgage Notes in a private offering ("Offering") to institutional
investors. The Offering was made under Rule 144A of the Securities Act of 1933,
as amended. The net proceeds from the Offering were used primarily to redeem
the Company's $75 million outstanding principal amount of First Mortgage Notes
due 2001 ("2001 Notes"), to pay dividends to stockholders and to reduce
outstanding indebtedness under the Company's revolving credit facilities. On
January 28, 1998, the Company exchanged the aforementioned First Mortgage Notes
for New First Mortgage Notes which are identical in all material respects except
that the New First Mortgage Notes ("First Mortgage Notes") have been registered
under the Securities Act of 1933, as amended.
Cash flow from operating activities was $14.0 million in fiscal 1998, compared
with cash flow from operating activities of $4.7 million in fiscal 1997. The
increase in cash provided by operations is due to improved operations, decreases
in inventories, and increases in accounts
17
<PAGE>
payable. Earnings before interest, taxes, depreciation, amortization,
restructuring expense, extraordinary item and the non-cash portion of the post-
retirement expense ("EBITDA") was approximately $22.8 million at April 30, 1998
as compared to $17.6 million in the prior year. Management of the Company
believes that EBITDA is a valuable measure of operating cash flow and is an
indicator of the Company's ability to meet interest payments and fund capital
expenditures. EBITDA does not represent and should not be considered as an
alternative to net income or cash flow from operations as determined by
generally accepted accounting principles and EBITDA does not necessarily
indicate whether cash flow will be sufficient for cash requirements. The Company
excludes restructuring expense, extraordinary items and gain or loss on
retirements from EBITDA due to the non-recurring nature of these items.
Cash used in investing activities in fiscal 1998 was $11.4 million, consisting
principally of the purchase of Waddell and capital improvements. In fiscal 1998,
cash provided by financing activities consisted of proceeds from the First
Mortgage Notes offering and the debt related to the purchase of Waddell. Cash
used in financing activities included payment of offering costs, payments on the
revolving credit facilities, payment of the 2001 Notes and payment of dividends.
Cash flow from operating activities was $4.7 million in fiscal 1997, compared
with cash flow from operating activities of $3.1 million in fiscal 1996. Cash
used in investing activities in fiscal 1997 was $3.7 million, consisting
principally of replacement and environmental expenditures and other capital
improvements. In fiscal 1997, approximately $1.1 million of cash flow from
operating activities was used in financing activities, principally to repay
long-term debt and make payments to retired executives of the Company in respect
of stock appreciation rights.
The Company's cash flow from operating activities and borrowings under the
revolving credit facilities are expected to be sufficient to fund capital
improvements and meet any near-term working capital requirements. On a longer
term basis, the Company has significant future debt service obligations. The
Company's ability to satisfy these obligations and to secure adequate capital
resources in the future will be dependent on its ability to generate adequate
operating cash flow. The Company expects that its cash flow from operations and
borrowing availability under its revolving credit facilities will be sufficient
to fund the repayment of the First Mortgage Notes and other investing
activities. This will be dependent on its overall operating performance and be
subject to general business, financial and other factors affecting the Company
and the domestic steel industry, as well as prevailing economic conditions,
certain of which are beyond the control of the Company. The leveraged position
of the Company and the restrictive covenants contained in the Indenture and the
revolving credit facilities could significantly limit the Company's ability to
withstand competitive pressures or adverse economic conditions.
CAPITAL EXPENDITURES
Capital expenditures for fiscal 1998 were approximately $9 million, including
approximately $5.3 million for the Shear Line Project at the Sand Springs
Facility. The Company estimates annual maintenance capital expenditures to be
approximately $3 million.
18
<PAGE>
COMPLIANCE WITH ENVIRONMENTAL LAWS AND REGULATIONS
The Company is subject to a broad range of federal, state and local
environmental regulations and requirements, including those governing air
emissions and discharges into water, and the handling and disposal of solid
and/or hazardous wastes. As part of its normal course of business, the Company
incurs expenses, primarily for the disposal of bag house dust, to comply with
these regulations and requirements. Expenses were approximately $1.7 million,
$2.1 million and $2.0 million in fiscal 1996, 1997, and 1998. Capital
expenditures incurred by the Company to comply with these requirements were
approximately $0.7 million and $0.3 million in fiscal 1997 and 1998. In
addition, in the event of a release of a hazardous substance generated by the
Company, the Company could be responsible for the remediation of contamination
associated with such a release. The Company believes that it is currently in
substantial compliance with all known material and applicable environmental
regulations.
INFLATION
The Company has not experienced any material adverse effects on operations in
recent years because of inflation, though margins can be affected by
inflationary conditions. The Company's primary cost components are ferrous
scrap, energy and labor, all of which are susceptible to domestic inflationary
pressures. Finished product prices, however, are influenced by general economic
conditions and competitive factors within the steel industry. While the Company
generally has been successful in passing on cost increases to its customers
through price adjustments, the effect of steel imports, severe market price
competition and under-utilized industry capacity has in the past, and could in
the future, limit the Company's ability to adjust pricing.
YEAR 2000 COMPLIANCE
The Company has been reviewing potential issues associated with the computer
applications that could fail or generate erroneous results by or at the year
2000 ("Year 2000") and expects to conclude its review of all these issues during
1998. A significant number of the Company's critical business applications have
already been modified and tested to ensure Year 2000 compliance. The remaining
Year 2000 projects are scheduled for completion and testing during 1998 and
1999. The total cost of converting internal systems to achieve Year 2000
compliance is not expected to be material to the Company. The Company has
formed a project team that has inventoried the operating and other systems and
has acquired written assurance from vendors that they have addressed or will
address the Year 2000 issue before Year 2000. The Company is also assessing the
business impact of Year 2000 issues related to vendors, major customers, service
suppliers, communications providers, and banks.
ACCOUNTING PRONOUNCEMENTS
In June 1997, the Financial Accounting Standards Board ("FASB") issued
Statement of Financial Accounting Standards ("Statement") No. 130 "Reporting
Comprehensive Income". Statement No. 130 establishes standards for reporting
and display of comprehensive income and its components in the financial
statements. Statement No. 130 is effective for fiscal years beginning after
December 15, 1997. Reclassification of financial statements for earlier periods
provided for comparative purposes is required. The Company plans to adopt
Statement No. 130 in the quarter ended July 31, 1998.
19
<PAGE>
Also in June 1997, the FASB issued Statement No. 131, "Disclosures about
Segments of an Enterprise and Related Information". Statement No. 131,
establishes standards for the way that public business enterprises report
information about operating segments in annual financial statements and requires
that those enterprises report selected information about operating segments in
interim financial reports issued to shareholders. It also establishes standards
for related disclosures about products and services, geographic areas and major
customers. Statement No. 131 is effective for financial statements for fiscal
years beginning after December 15, 1997. Financial statement disclosures for
prior periods are required to be restated. The Company plans to adopt Statement
No. 131 for the year ended April 30, 1999.
The adoption of Statements No. 130 and No. 131 is not expected to have a
material impact on the Company's consolidated results of operations, financial
position or cash flows.
20
<PAGE>
ITEM 8. FINANCIAL STATEMENTS
- ------- --------------------
21
<PAGE>
INDEPENDENT AUDITORS' REPORT
The Board of Directors and Stockholders
Sheffield Steel Corporation:
We have audited the accompanying consolidated balance sheets of Sheffield Steel
Corporation and subsidiaries as of April 30, 1997 and 1998, and the related
consolidated statements of operations, stockholders' equity (deficit), and cash
flows for each of the years in the three-year period ended April 30, 1998. In
connection with our audits of the consolidated financial statements, we have
also audited the financial statement schedule listed in the index at Item
14(a)2. These consolidated financial statements and schedule are the
responsibility of the Company's management. Our responsibility is to express an
opinion on these consolidated financial statements and schedule based on our
audits.
We conducted our audits in accordance with generally accepted auditing
standards. Those standards require that we plan and perform the audit to obtain
reasonable assurance about whether the financial statements are free of material
misstatement. An audit includes examining, on a test basis, evidence supporting
the amounts and disclosures in the financial statements. An audit also includes
assessing the accounting principles used and significant estimates made by
management, as well as evaluating the overall financial statement presentation.
We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the consolidated financial statements referred to above present
fairly, in all material respects, the financial position of Sheffield Steel
Corporation and subsidiaries at April 30, 1997 and 1998, and the results of
their operations and their cash flows for each of the years in the three-year
period ended April 30, 1998, in conformity with generally accepted accounting
principles. Also in our opinion, the related financial statement schedule, when
considered in relation to the basic consolidated financial statements taken as a
whole, presents fairly, in all material respects, the information set forth
therein.
KPMG Peat Marwick LLP
Tulsa, Oklahoma
June 27, 1998
22
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
(In thousands, except share and per share data)
<TABLE>
<CAPTION>
APRIL 30,
----------------------
ASSETS 1997 1998
- ------ ---- ----
<S> <C> <C>
Current assets:
Cash and cash equivalents $ 15 2,590
Accounts receivable, less allowance for doubtful
accounts of $658 at April 30, 1997 and 1998 20,856 20,994
Inventories 37,112 33,548
Prepaid expenses and other 1,452 861
Deferred income tax asset 2,689 2,942
-------- -------
Total current assets 62,124 60,935
Property, plant and equipment, net 65,885 68,730
Property held for sale 439 439
Intangible asset, less accumulated amortization of
$1,673 and $834 in 1997 and 1998, respectively 3,314 8,672
Other assets 290 94
Receivable from parent 2,705 2,705
Deferred income tax asset 1,817 2,043
-------- -------
$136,574 143,618
======== =======
LIABILITIES AND STOCKHOLDERS' EQUITY (DEFICIT)
- ----------------------------------------------
Current liabilities:
Current portion of long-term debt $ 936 1,702
Accounts payable 16,475 19,745
Accrued interest payable 4,500 5,151
Accrued liabilities 5,601 6,290
Due to affiliated company 49 85
-------- -------
Total current liabilities 27,561 32,973
Long-term debt, excluding current portion, less
unamortized discount of $1,696 at April 30, 1997 95,614 112,682
Accrued post-retirement benefit costs 9,095 10,988
Other liabilities 2,148 1,101
-------- -------
Total liabilities 134,418 157,744
-------- -------
Stockholders' equity (deficit):
Common stock, $.01 par value, authorized 10,000,000
shares, issued and outstanding 3,570,125 shares 34 36
Additional paid-in capital 2,536 2,536
Retained earnings (deficit) 528 (15,698)
-------- -------
Total stockholders' equity (deficit) 3,098 (13,126)
Less loans to stockholders 942 1,000
-------- -------
2,156 (14,126)
Commitments and contingencies
-------- -------
$136,574 143,618
======== =======
</TABLE>
See accompanying notes to consolidated financial statements.
23
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
<TABLE>
<CAPTION>
YEAR ENDED APRIL 30,
-------------------------------------------------
1996 1997 1998
---- ---- ----
<S> <C> <C> <C>
Sales $172,317 170,865 185,077
Cost of sales 143,121 140,234 148,496
-------- ------- -------
Gross profit 29,196 30,631 36,581
Selling, general and administrative expense 11,737 11,923 13,006
Depreciation and amortization expense 6,567 6,775 7,112
Postretirement benefit expense other than pensions 2,776 2,353 2,681
Restructuring expense - 1,320 -
-------- ------- -------
Operating income 8,116 8,260 13,782
-------- ------- -------
Other (expense) income:
Interest expense, net (11,733) (11,769) (12,300)
Other 526 - (180)
-------- ------- -------
(11,207) (11,769) (12,480)
-------- ------- -------
Income (loss) from operations before
income taxes and extraordinary item (3,091) (3,509) 1,302
Income tax benefit - - 495
-------- ------- -------
Income (loss) from operations before
extraordinary item (3,091) (3,509) 1,797
Extraordinary item - loss on retirement of debt - - (8,023)
-------- ------- -------
Net loss $ (3,091) (3,509) (6,226)
======== ======= =======
Basic earnings (loss) per share:
Income (loss) from operations before extraordinary item $ (.92) (1.04) .53
Extraordinary item - loss on retirement of debt - - (2.35)
-------- ------- -------
Net loss $ (.92) (1.04) (1.82)
======== ======= =======
Diluted earnings (loss) per share:
Income (loss) from operations before extraordinary item $ (.92) (1.04) .47
Extraordinary item - loss on retirement of debt - - (2.11)
-------- ------- -------
Net loss $ (.92) (1.04) (1.64)
======== ======= =======
</TABLE>
See accompanying notes to consolidated financial statements.
24
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY (DEFICIT)
(In thousands, except share data)
<TABLE>
<CAPTION>
YEAR ENDED APRIL 30,
----------------------------------------------
1996 1997 1998
---- ---- ----
<S> <C> <C> <C>
Common stock:
Balance at beginning of year $ 34 34 34
Common stock warrants
exercised (245,250 shares) - - 2
------- ------ -------
Balance at end of year 34 34 36
------- ------ -------
Additional paid-in capital:
Balance at beginning of year 3,685 3,591 2,536
Agreement to repurchase common stock - (1,055) -
Repurchase of common stock warrants (94) - -
------- ------ -------
Balance at end of year 3,591 2,536 2,536
------- ------ -------
Retained earnings (deficit):
Balance at beginning of year 8,877 4,037 528
Net loss (3,091) (3,509) (6,226)
Dividends (1,749) - (10,000)
------- ------ -------
Balance at end of year 4,037 528 (15,698)
------- ------ -------
Total stockholders' equity (deficit) $ 7,662 3,098 (13,126)
======= ====== =======
</TABLE>
See accompanying notes to consolidated financial statements.
25
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
<TABLE>
<CAPTION>
YEAR ENDED APRIL 30,
-----------------------------------------
1996 1997 1998
---- ---- ----
<S> <C> <C> <C>
Cash flows from operating activities:
Net loss $(3,091) (3,509) (6,226)
Adjustments to reconcile net loss to net cash
provided by operating activities:
Depreciation and amortization 6,711 6,919 7,409
Loss (gain) on sale or retirement of assets (526) - 160
Accrual of postretirement benefits other than
pensions, net of cash paid 1,747 1,272 1,893
Non-cash portion of extraordinary item - - 2,995
Deferred income taxes - - (495)
Changes in assets and liabilities, net of effects
of acquisition of business:
Accounts receivable 1,564 751 726
Inventories (303) 3,209 3,779
Prepaid expenses and other (301) (538) 677
Other assets 177 (54) (16)
Accounts payable (2,624) (4,020) 2,899
Accrued interest payable - - 651
Accrued liabilities (172) (680) 373
Due to affiliated company - 2 36
Income taxes payable (123) - -
Other liabilities 8 1,377 (875)
------- ------ -------
Total adjustments 6,158 8,238 20,212
------- ------ -------
Net cash provided by operating activities 3,067 4,729 13,986
------- ------ -------
Cash flows from investing activities:
Capital expenditures (4,978) (3,695) (9,023)
Acquisition of business, net of cash acquired - - (2,414)
Proceeds from sale of fixed assets 538 18 -
------- ------ -------
Net cash used in investing activities (4,440) (3,677) (11,437)
</TABLE>
(Continued)
26
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS, CONTINUED
(In thousands)
<TABLE>
<CAPTION>
YEAR ENDED APRIL 30,
-----------------------------------------
1996 1997 1998
---- ---- ----
<S> <C> <C> <C>
Cash flows from financing activities:
Net increase (decrease) under revolving lines of credit $ 2,081 (1,995) (19,684)
Proceeds from issuance of long-term debt 2,195 2,075 112,213
Repayment of long-term debt (549) (715) (76,502)
Payment of debt issuance costs (75) - (6,001)
Payments in respect of stock appreciation rights (416) (448) -
Dividends paid (1,749) - (10,000)
Repurchase of common stock warrants (94) - -
------- ------ -------
Net cash provided by (used in) financing activities 1,393 (1,083) 26
------- ------ -------
Net (decrease ) increase in cash and cash equivalents 20 (31) 2,575
Cash and cash equivalents at beginning of year 26 46 15
------- ------ -------
Cash and cash equivalents at end of year $ 46 15 2,590
======= ====== =======
Supplemental Disclosure of Cash Flow Information
- --------------------------------------------------------------
Cash paid during the year for:
Interest $11,611 11,625 11,352
======= ====== =======
Income taxes $ 174 - -
======= ====== =======
Noncash items:
Change in unfunded accumulated benefit obligation
included in other assets and other liabilities $ 558 53 172
======= ====== =======
Decrease in paid-in capital for stock repurchase agreement $ - 1,055 -
======= ====== =======
Increase in other liabilities for stock repurchase agreement $ - 662 -
======= ====== =======
Decrease in loans to stockholders related to stock
repurchase agreement $ - 393 -
======= ====== =======
</TABLE>
See accompanying notes to consolidated financial statements.
27
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
APRIL 30, 1996, 1997 AND 1998
(In thousands, except share data)
(1) SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
ORGANIZATION AND NATURE OF BUSINESS
The consolidated financial statements of Sheffield Steel Corporation (the
Company) include the accounts of its divisions, Sheffield Steel-Sand Springs
(Sand Springs), Sheffield Steel-Kansas City (Kansas City), and Sheffield Steel-
Joliet (Joliet) and its wholly owned subsidiaries, Sheffield Steel Corporation-
Oklahoma City (Oklahoma City), Waddell's Rebar Fabricators, Inc. (Waddell)
since October 28, 1997, and Sand Springs Railway Company (the Railway). HMK
Enterprises, Inc. (HMK) owns approximately 90% of the currently issued and
outstanding common stock of the Company. All material intercompany transactions
and balances have been eliminated in consolidation.
The Company's primary business is the production of concrete reinforcing bar,
fence posts, and a range of hot rolled bar products including rounds, flats and
squares. The Company operates in an economic environment wherein the commodity
nature of both its products for sale and its primary raw materials cause sales
prices and purchase costs to fluctuate, often on a short-term basis, due to the
worldwide supply and demand situation for those commodities. The supply and
demand factors for its products for sale and the supply and demand factors for
its primary raw materials correlate to a degree, but are not necessarily the
same. Therefore, margins between sales price and production costs can fluctuate
significantly on a short-term basis.
The Company sells to customers located throughout the continental United States.
The Company had one customer that accounted for approximately 12% of sales for
the year ended April 30, 1998 and no customers that accounted for greater than
10% of sales for the years ended April 30, 1996 and 1997. The Company grants
credit to customers under normal industry standards and terms. Policies and
procedures have been established which allow for proper evaluation of each
customer's creditworthiness as well as general economic conditions.
Consequently, an adverse change in those factors could effect the Company's
estimate of its bad debts.
CASH EQUIVALENTS
The Company considers all highly liquid debt instruments with a maturity of
three months or less when purchased to be cash equivalents.
INVENTORIES
Inventories are stated at the lower of cost (as determined by the first-in
first-out method) or market. The cost of work-in-process and finished goods
inventories is based on standards which approximate cost. Work-in-process and
finished goods include direct labor and allocated overhead.
INTANGIBLE ASSETS
Intangible assets consist primarily of goodwill and debt issuance costs. The
cost of goodwill is being amortized on a straight-line basis over a period of 40
years. Debt issuance costs are amortized over the term of the related
indebtedness. It is the Company's policy to recognize an impairment of the
carrying value of goodwill when management's best estimate of undiscounted
future cash flows over the remaining amortization period is less than the
carrying amount.
28
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
PROPERTY, PLANT AND EQUIPMENT
Property, plant and equipment are recorded at cost. Depreciation is provided
over the estimated useful lives of the individual assets using the straight-line
method. The useful lives of the property and equipment range from three to
forty years. Significant renewals and betterments are capitalized; costs of
maintenance and repairs are charged to expense as incurred. Interest costs for
the construction of certain long-term assets are capitalized and amortized over
the estimated useful lives of the related assets.
INCOME TAXES
Deferred tax assets and liabilities are recognized for the estimated future tax
consequences attributable to differences between the financial statement
carrying amounts of existing assets and liabilities and their respective tax
bases. Deferred tax assets and liabilities are measured using enacted tax rates
in effect for the year in which those temporary differences are expected to be
recovered or settled. The effect on deferred tax assets and liabilities of a
change in tax rates is recognized in income in the period that includes the
enactment date.
The Company is a member of a group that files a consolidated income tax return
with HMK (the Group). The Group's tax-sharing agreement provides that current
and deferred income taxes be determined as if each member of the Group were a
separate taxpayer. All income taxes payable or receivable are due to or from
HMK.
POSTRETIREMENT BENEFITS
The Company provides postretirement benefits to certain retirees and their
beneficiaries, generally for the remainder of their lives. The Company measures
the cost of its obligation based on an actuarially determined present liability,
the accumulated postretirement benefit obligation (APBO). The net periodic
costs are recognized as employees render the services necessary to earn the
postretirement benefits.
ENVIRONMENTAL COMPLIANCE COSTS
The Company accrues the cost of environmental remediation liabilities when the
criteria of Statement of Financial Accounting Standards (SFAS) No. 5, Accounting
for Contingencies, have been met. Environmental remediation costs have not had a
material impact on the Company's financial position, results of operations, or
liquidity.
REVENUE RECOGNITION
Revenues from sales are recognized when products are shipped to customers,
except the Railway which recognizes revenues when services are performed.
EARNINGS PER SHARE
Effective January 31, 1998, the Company adopted the guidelines established by
Statement of Financial Accounting Standard (SFAS) No. 128, "Earnings Per Share".
All references in the financial statements to earnings per share amounts have
been restated to conform with the requirements of SFAS No. 128. All options and
warrants were excluded from computations for the years ended April 30, 1996 and
1997 since their effect on loss per share was anti-dilutive.
USE OF ESTIMATES
The preparation of financial statements in conformity with generally accepted
accounting principles requires management to make estimates and assumptions that
affect the reported amounts of assets and liabilities and disclosure of
contingent assets and liabilities at the date of the financial statements and
the reported amounts of revenues and expenses during the reporting period.
Actual results could differ from those estimates.
29
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
STOCK OPTION PLAN
Prior to May 1, 1996, the Company accounted for its stock option plan in
accordance with the provisions of Accounting Principles Board ("APB") Opinion
No. 25, Accounting for Stock Issued to Employees, and related interpretations.
As such, compensation expense would be recorded on the date of grant only if the
current market price of the underlying stock exceeded the exercise price. On
May 1, 1996, the Company adopted SFAS No. 123, Accounting for Stock-Based
Compensation, which permits entities to recognize as expense over the vesting
period the fair value of all stock-based awards on the date of grant.
Alternatively, SFAS No. 123 also allows entities to continue to apply the
provisions of APB Opinion No. 25 and provide pro forma net income and pro forma
earnings per share disclosures for employee stock option grants as if the fair-
value-based method defined in SFAS No. 123 had been applied. The Company has
elected to continue to apply the provisions of APB Opinion No. 25 and provide
the pro forma disclosure provisions of SFAS No. 123.
(2) FAIR VALUE OF FINANCIAL INSTRUMENTS
The Company defines the fair value of a financial instrument as the amount at
which the instrument could be exchanged in a current transaction between willing
parties. The carrying value of cash and cash equivalents, trade accounts
receivable and trade accounts payable approximates the fair value because of the
short maturity of those instruments. The carrying amounts of notes payable to
banks and an equipment financing company (see Note 5) approximates the fair
value due to these debt instruments having variable interest rates similar to
those that are currently available to the Company. The fair value of the first
mortgage notes (see Note 5) at April 30, 1998, based on the currently offered
market price, is approximately $114.4 million versus a carrying value of
approximately $110.0 million.
(3) INVENTORIES
The components of inventories are as follows:
<TABLE>
<CAPTION>
APRIL 30,
---------------------
1997 1998
------- --------
<S> <C> <C>
Raw materials and storeroom supplies $10,924 10,673
Work in process 10,978 11,721
Finished goods 15,210 11,154
------- ------
$37,112 33,548
======= ======
</TABLE>
(4) PROPERTY, PLANT AND EQUIPMENT
The components of property, plant and equipment are as follows:
<TABLE>
<CAPTION>
APRIL 30,
---------------------
1997 1998
------- --------
<S> <C> <C>
Land and buildings $ 16,483 17,264
Machinery and equipment 92,607 94,872
Roadbed and improvements 5,197 5,303
Construction in process 2,727 7,562
-------- -------
117,014 125,001
Less accumulated depreciation and amortization 51,129 56,271
-------- -------
$ 65,885 68,730
======== =======
</TABLE>
Depreciation and amortization of property, plant and equipment charged to
operations in 1996, 1997 and 1998 was $6,021, $6,271 and $6,605, respectively.
Approximately $25 of interest costs were capitalized as part of property, plant
and equipment in 1996. No interest costs were capitalized in 1997 or 1998.
30
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
The range of estimated useful lives for determining depreciation and
amortization of the major classes of assets are:
Buildings 5-25 years
Machinery and equipment 3-25 years
Roadbed and improvements 3-40 years
(5) LONG-TERM DEBT
Long-term debt is comprised of the following:
<TABLE>
<CAPTION>
APRIL 30,
-----------------------
1997 1998
------- -------
<S> <C> <C>
First mortgage notes [a] $ - 110,000
2001 Notes, net of unamortized discount,
effective rate 12.5% [a] 73,304 -
Revolving credit agreement [b] 18,417 -
Railway term loan [c] 2,000 1,500
Railway revolving credit agreement [c] 1,267 -
Equipment notes [d] 1,562 1,050
Notes payable [e] - 1,834
------- -------
96,550 114,384
Less current portion 936 1,702
------- -------
$95,614 112,682
======= =======
</TABLE>
[a] At April 30, 1997 the Company had $75 million of 12% first mortgage notes
due 2001 (2001 Notes) with warrants to purchase 10% of the Company's common
stock. The notes were sold in units consisting of $1,000 principal amount
and five warrants. Each warrant entitled the holder to purchase one share
of the Company's common stock through November 1, 2001, at an exercise
price of $.01 per share, subject to adjustment.
Effective November 26, 1997, the Company offered $110,000,000 of 11.5%
First Mortgage Notes due 2005. The proceeds from the offering were used
primarily to redeem the Company's 2001 Notes, to pay dividends to
stockholders and to reduce outstanding indebtedness under the Company's
revolving credit facilities. On January 28, 1998, the Company exchanged the
aforementioned First Mortgage Notes for New First Mortgage Notes which are
identical in all material respects except that the New First Mortgage Notes
have been registered under the Securities Act of 1933, as amended.
Interest on the New First Mortgage Notes is payable semi-annually on June 1
and December 1 of each year at the rate of 11.5% per annum. The New First
Mortgage Notes are secured by a first priority lien on substantially all
existing and future real property and equipment. The Company is subject to
certain covenants including certain limitations on additional indebtedness
and restricted payments, such as dividends and purchases of stock.
[b] The revolving credit agreement with a bank provides for maximum borrowings
of $40 million based on a percentage of eligible accounts receivable and
inventory. Borrowings are secured by a first priority lien on inventory,
accounts receivable and related intangibles. Interest is computed at prime
plus a variable margin (based on the achievement of certain interest
coverage ratios) from 0% to 1% and is payable monthly. At April 30, 1998,
the interest rate was 8.5%. An annual commitment fee of.25% is charged on
the unused portion of the revolving credit agreement. The agreement
continues through November 1, 2000 and thereafter on a year-to-year basis
until terminated by the Company or the lender.
31
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
[c] The Railway credit agreement with a bank is comprised of two notes; a
$2 million term loan with $0.5 million principal payments each year with
the final payment on July 31, 2000, and a $1.5 million line of credit
maturing July 31, 1999. Obligations under the notes are secured by all of
the assets and capital stock of the Railway. Interest is computed at prime
plus a variable margin (based on the achievement of certain interest
coverage ratios) from 0% to 1% and is payable quarterly. At April 30, 1998,
the interest rate was 9.0%.
[d] Equipment notes are notes payable to equipment financing companies and
vendors related primarily to the financing of equipment purchases. The
notes are payable in monthly principal installments of $57 plus interest
payable at variable rates. The notes mature on various dates through 2002
and are secured by equipment.
[e] Notes payable consists of $1,750 million payable in quarterly installments
over four years to the former shareholders of Waddell (see Note 16). The
notes are secured by the capital stock of Waddell and bear interest at
NationsBank prime rate minus one-half of one percent. At April 30, 1998,
the interest rate was 8%. In addition, the Company assumed a note payable
to a bank in conjunction with the acquisition of Waddell.
The aggregate maturities of long-term debt for the years ended April 30, are as
follows:
<TABLE>
<S> <C>
1999 $ 1,702
2000 1,294
2001 1,080
2002 308
2003 110,000
--------
Total maturities $114,384
========
</TABLE>
Interest costs incurred in 1996, 1997 and 1998 were $11,758, $11,769 and
$12,164, respectively. Various agreements contain restrictive covenants
including limitations on additional borrowings, dividends and other
distributions and the retirement of stock. Additionally, certain agreements
require maintenance of specified performance ratios. In the event of default
of the restrictive covenants or failure to maintain the specified performance
measures, the commitments related to the credit agreements can be withdrawn by
the lender.
6) INCOME TAXES
The Company had no income tax expense or benefit for the years ended April 30,
1996 and 1997. Income tax benefit for the year ended April 30, 1998 consists of
deferred tax benefit for federal and state purposes of $421 and $74,
respectively. Income taxes attributable to operations differed from the amounts
computed by applying the U.S. federal income tax rate of 34% as a result of the
following:
<TABLE>
<CAPTION>
Year Ended April 30,
--------------------------------------
1996 1997 1998
------- ------ ----
<S> <C> <C> <C>
Computed "expected" tax benefit (expense) $ 1,050 1,193 (443)
State income taxes, net of federal benefit 124 140 (52)
Change in valuation allowance for deferred tax assets
allocated to income tax benefit (expense) (1,231) (1,032) 872
Other, net 57 (301) 118
------- ------ ----
$ - - 495
======= ====== ====
</TABLE>
32
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
The tax effects of temporary differences that gave rise to significant portions
of the deferred tax assets and deferred tax liabilities are presented below:
<TABLE>
APRIL 30,
-----------------------
1997 1998
-------- -------
<S> <C> <C>
Deductible temporary differences, excluding
postretirement benefit costs:
Inventories $ 1,338 957
Allowance for doubtful accounts 250 250
Accrued liabilities not deductible until paid 1,689 1,769
Restructuring charge 560 520
Net operating loss carryforwards 10,848 13,847
Alternative minimum tax credit carryforwards 962 962
Investment tax credit carryforwards 3,224 3,298
-------- -------
18,871 21,603
Less valuation allowance 6,809 8,986
-------- -------
12,062 12,617
Taxable temporary difference - plant and equipment (11,012) (11,807)
--------
Net deferred tax asset, excluding postretirement
benefit costs 1,050 810
Postretirement benefit costs 3,456 4,175
-------- -------
Net deferred tax asset $ 4,506 4,985
======== =======
</TABLE>
At April 30, 1998 the Company had available net operating loss (NOL)
carryforwards for regular federal tax purposes of approximately $36,700 which
will expire as follows: $1,400, $400, $3,700, $4,200, $5,600, $7,400, $6,300,
and $7,700 in the years ended 2000, 2002, 2007, 2008, 2009, 2011, 2012, and
2013, respectively. The Company has investment tax credit carryforwards for
federal and state tax purposes of $520 and $2,778, respectively, which the
Company has fully reserved as it is likely that those tax credits will not be
utilized prior to their expiration. The credits expire in various periods
through 2007. Company also has available $962 of alternative minimum tax (AMT)
credit carryforwards which may be used indefinitely to reduce future federal
regular income tax obligations.
A valuation allowance is required when it is more likely than not that all or a
portion of the deferred tax assets will not be realized. The ultimate
realization of the deferred tax assets is dependent upon future profitability.
Fiscal 1990 capped a three-year period in which the Company generated
approximately $19 million and $11.5 million in book and tax earnings,
respectively. During fiscal 1991 through fiscal 1994, the Company incurred
approximately $12.4 million in taxable losses as a result of steel bar prices,
significant losses from operations at Oklahoma City, and a $5.3 million loss on
the early retirement of debt. A recovery of steel bar prices which began in
fiscal 1994 and continued into 1995 resulted in the Company generating $3.6
million in taxable income. In 1995, the Company started up a new rolling mill
which passed the required performance tests and was accepted during fiscal 1997.
During 1998, the Company improved mill productivity and operating performance
achieving profitability before the extraordinary charge related to issuance of
the First Mortgage Notes. The Company continues to introduce new mill products
and make progress toward achieving the anticipated potential of the mill.
However, there can be no assurance that the mill will reach the forecasted
production goals or that the Company will achieve future profitability.
Accordingly, a valuation allowance has been established at April 30, 1998, to
reduce the deferred tax assets to a level which, more likely than not, will be
realized.
Future annual postretirement benefit costs are expected to exceed deductible
amounts for many years and it is anticipated that all of the deferred tax assets
related thereto will be utilized as such amounts become deductible.
Accordingly, management did not establish a valuation allowance for the deferred
tax asset related to future annual postretirement benefit costs. In order to
fully realize the remaining net deferred tax asset, the Company will need to
generate future taxable income of approximately $6,900. Based upon
33
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
historical taxable income trends and projections for future taxable income over
the periods which the deferred tax assets are deductible, management believes it
is more likely than not that the Company will realize the benefits of the net
deferred assets, net of the existing valuation allowance, at April 30, 1998.
(7) EMPLOYEE BENEFIT PLANS
Sand Springs and Joliet have defined benefit plans covering substantially all of
their employees. Benefits are generally based on years of service and the
employee's compensation during the last ten years of employment. The Company's
funding policy is to contribute annually at least the minimum amount necessary
to avoid a deficiency in the funding standard. The Company received a waiver of
the minimum funding standard in the amount of $776 for the plan year ended
December 31, 1984, which is being amortized over 15 years. Net periodic pension
expense for these plans included the following:
<TABLE>
<CAPTION>
Year Ended April 30,
-----------------------------------------------
1996 1997 1998
------- ------ ------
<S> <C> <C> <C>
Service cost $ 653 747 735
Interest cost 1,306 1,462 1,591
Net amortization and deferral 2,575 420 3,867
Actual return on plan assets (3,420) (1,483) (5,178)
------
$ 1,114 1,146 1,015
======= ====== ======
</TABLE>
The following table sets forth the funded status of the Company's plans, as
determined by an independent actuary:
<TABLE>
<CAPTION>
April 30, 1997 April 30, 1998
----------------------------------- ---------------------------------
Accumulated Assets Accumulated Assets
Benefits Exceed Benefits Exceed
Exceed Accumulated Exceed Accumulated
Assets Benefits Assets Benefits
----------------- ---------------- ---------------- ----------------
<S> <C> <C> <C> <C>
Actuarial present value of vested benefit
obligation $2,527 15,658 3,013 18,691
====== ====== ===== ======
Accumulated benefit obligation $2,556 15,998 3,060 19,559
====== ====== ===== ======
Projected benefit obligation 2,737 18,451 3,283 21,937
Plan assets at fair value 2,313 19,340 2,822 23,705
------ ------ ----- ------
Projected benefit obligation in excess of
plan assets 424 (889) 461 (1,768)
Unrecognized net gain 151 2,371 240 3,612
Unrecognized prior service cost (494) 94 (453) (144)
Unrecognized net transition liability (11) (2,774) (9) (2,083)
Adjustment required to recognize
minimum liability 173 - - -
------ ------ ----- ------
Net pension liability (asset) $ 243 (1,198) 239 (383)
====== ====== ===== ======
</TABLE>
Plan assets consist primarily of U.S. government obligations and marketable
equity securities. The unrecognized net transition obligations are being
amortized over periods of 14-15 years.
Major assumptions used in the accounting for the pension plans were as follows:
<TABLE>
<CAPTION>
1997 1998
---- ----
<S> <C> <C>
Discount rate 7.50% 7.0%
Rate of increase in compensation levels 0%-4% 0%-4%
Expected long-term rate of return on assets 8.0% 8.0%
</TABLE>
34
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
Certain divisions of the Company maintain defined contribution plans in which
various groups of employees participate. Total Company contributions for these
plans amounted to $85, $81, and $89 in 1996, 1997, and 1998, respectively.
(8) POSTRETIREMENT BENEFITS OTHER THAN PENSIONS
The Company provides postretirement health and life insurance benefits to
certain retirees and their beneficiaries, generally for the remainder of their
lives. The Plan is contributory, with retiree contributions adjusted annually,
and contains other cost-sharing features such as deductibles, co-insurance, and
Medicare. The Company's policy is to fund accumulated postretirement benefits on
a "pay-as-you-go" basis. Net periodic postretirement benefit costs for 1996,
1997 and 1998 include the following components:
<TABLE>
<CAPTION>
Year Ended April 30,
-------------------------------------------
1996 1997 1998
------ ----- -----
<S> <C> <C> <C>
Service cost $ 326 321 292
Interest cost 1,690 1,372 1,539
Net amortization 760 660 850
------ ----- -----
$2,776 2,353 2,681
====== ===== =====
</TABLE>
The following table sets forth the APBO and the amount of the net postretirement
benefit liability as determined by an independent actuary and recognized in the
balance sheet at April 30, 1997 and 1998:
<TABLE>
<CAPTION>
1997 1998
-------- ------
<S> <C> <C>
Retirees $ 10,173 14,288
Fully eligible active plan participants 4,522 3,175
Other active plan participants 4,848 5,520
-------- -------
Accumulated post retirement benefit
obligation 19,543 22,983
Unrecognized transition obligation (22,956) (21,521)
Unrecognized net gain 12,508 9,526
-------- -------
Accrued postretirement benefit cost $ 9,095 10,988
======== =======
</TABLE>
The annual discount rate used in determining the APBO was 7.5% and 7.0% at
April 30, 1997 and 1998, respectively. Also, for measurement purposes, the
medical trend rates used for HMO and PPO/indemnity plans were 6.2% and 10.4%,
respectively. The medical and HMO trend rates are assumed to decline one-half
percent per year to an ultimate level of 5.5%. The health care cost trend rate
assumption has a significant effect on the amounts reported. For example,
increasing the assumed health care cost trend rates by one percentage point in
each year would increase the APBO as of April 30, 1998, by $2,933 and the
aggregate service and interest cost components of net periodic postretirement
benefit costs by $249.
(9) OPERATING LEASES
The Company is obligated under various noncancelable operating leases for
certain land and buildings. These leases generally contain inflationary rent
escalations and require the Company to pay all executory costs such as
maintenance and insurance. Rental expense for operating leases (except those
with lease terms of a month or less that were not renewed) was $277, $313 and
$315 for the years ended April 30, 1996, 1997 and 1998, respectively.
35
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
Future minimum lease payments under noncancelable operating leases (with initial
or remaining lease terms in excess of one year) for the years ending April 30,
are as follows:
<TABLE>
<S> <C>
1999 $ 328
2000 337
2001 353
2002 353
2003 275
Later years 295
------
Total $1,941
======
</TABLE>
(10) COMMITMENTS AND CONTINGENCIES
The Company is partially self-insured for certain risks consisting primarily of
employee health insurance programs and workers' compensation. Probable losses
and claims are accrued as they become estimable. The Company maintains letters
of credit totaling approximately $2.2 million in accordance with workers'
compensation arrangements.
The Company is involved in claims and legal actions arising in the ordinary
course of business. In the opinion of management, the ultimate disposition of
these matters will not have a material adverse effect on the Company's financial
position, results of operations, or liquidity.
(11) RELATED PARTY TRANSACTIONS
An affiliated company provides management and business services to the Company,
including, but not limited to, financial, marketing, executive personnel,
corporate development, human resources, and limited legal services. The Company
believes that transactions with related parties are at costs that could be
obtained from third parties. Management fees charged during the years ended
April 30, 1996, 1997 and 1998, were approximately $573, $569 and $720,
respectively. In addition, the Company purchases general liability, workers'
compensation and other insurance through an affiliated company which provides
risk management services, including procuring and maintaining property and
casualty insurance coverage; reviewing and recommending alternative financing
methods for insurance coverage; identifying and evaluating risk exposures, and
preparing and filing proof of loss statements for insured claims. Total fees
paid for insurance services during the years ended April 30, 1996, 1997 and
1998, were approximately $115, $115 and $142, respectively.
During fiscal year 1993, certain minority shareholders issued $1,000 of notes
receivable to the Company. The notes bear interest at an annual rate of 7.61%
and are secured by common stock of the Company. Principal and interest are due
on February 1, 2007, unless extended at the Company's option until February 1,
2012. The principal balance outstanding was $700 as of April 30, 1997 and 1998.
On September 30, 1996, the Company signed an agreement to repurchase 50,625
shares of the Company's common stock from two minority shareholders who formerly
were officers of the Company. The stock repurchase is pursuant to the Amended
and Restated Stockholder's Agreement dated September 15, 1993 and the stock
purchase price was calculated in accordance with said agreement. As a result of
this transaction, $393 of notes receivable from the former shareholders was
satisfied, the Company recorded a note payable in the amount of $662 and
decreased paid-in capital by $1,055. The notes payable accrue simple interest
at 6.02% and are being repaid in five annual installments which began December
12, 1997. The principal balance outstanding at April 30, 1997 and 1998 was $662
and $530, respectively.
The Company has a receivable of $2,205 from HMK related to certain tax
attributes allocated to the Company. Under an agreement with HMK, the
receivable will be realized by reducing future income taxes otherwise payable by
the Company to HMK. In addition, the Company advanced $500 to HMK to secure a
letter of credit for the Joliet insurance program.
36
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
(12) STOCK OPTIONS
On September 15, 1993, the Board of Directors adopted, and the stockholders of
the Company approved, the Company's 1993 Employee, Director and Consultant Stock
Option Plan (the Stock Option Plan). The Stock Option Plan provides for the
grant of incentive options to key employees of the Company and nonqualified
stock options to key employees, directors, and consultants of the Company.
A total of 580,000 shares of the Company's common stock, which would represent
approximately 15.3% of the Company's common stock on a fully diluted basis, have
been reserved for issuance under the Stock Option Plan. The options vest in
three years after the date of grant and may be exercised within 10 years or
20 years from the grant date for incentive and non-qualified options,
respectively, at a price not less than the fair market value of the stock at the
time the options are granted. Fair market value for purposes of determining the
exercise price is determined by the performance-based formula prescribed in the
Stock Option Plan. At April 30, 1998, there were 124,000 additional shares
available for grant under the Plan.
The Company applies APB Opinion No. 25 in accounting for its Plan and,
accordingly, no compensation cost has been recognized for its stock options in
the financial statements. Had the Company determined compensation cost based on
the fair value at the grant date for its stock options under SFAS No. 123, the
Company's net loss would have been reduced to the pro forma amounts indicated
below:
<TABLE>
<S> <C> <C>
1997 1998
------- -----
Pro forma net loss $(3,578) (6,303)
Pro forma loss per share:
Basic $ (1.06) (1.84)
Diluted $ (1.06) (1.66)
</TABLE>
The per share weighted-average fair value of stock options granted during 1997
and 1998 was $4.83 and $4.66, respectively, on the date of grant using the
minimum value method with the following assumptions: expected dividend yield of
approximately 1.0%, risk-free interest rate of 6.38%, and an expected life of
five years. Pro forma net income reflects only options granted in 1997 and
1998.
The options outstanding and activity during the periods indicated is as follows:
<TABLE>
<CAPTION>
Weighted Average
Options Exercise Price
-------- ----------------
<S> <C> <C>
At April 30, 1995 474,609 $ 7.41
Canceled (69,609) -
-------
At April 30, 1996 405,000 7.41
Granted 51,000 20.52
-------
At April 30, 1997 456,000 8.87
Granted 5,000 19.88
Canceled (5,000) 20.52
-------
At April 30, 1998 456,000 8.87
=======
</TABLE>
Exercise prices for options outstanding as of April 30, 1998 ranged from $7.41
to $20.52. The weighted-average remaining contractual life of those options is
13.6 years. There were 405,000 shares exercisable as of April 30, 1996, 1997
and 1998. There were no shares exercisable at April 30, 1995.
In connection with the adoption of the Stock Option Plan, the Company elected to
terminate its Stock Appreciation Rights Plan (SAR). Existing liabilities under
the SAR plan were frozen at their current level. All vested rights become
exercisable upon the participants' termination. Included in other liabilities
at April 30, 1997 and 1998 is $368 which represents the present value of the
SAR's based on vesting and retirement dates.
37
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
(13) RESTRUCTURING EXPENSE
During 1997, the Company recognized costs related to workforce reductions.
Approximately 42 hourly employees accepted early retirement incentives resulting
in costs of approximately $1,070 during the fourth quarter. In addition, 14
salaried employees were involuntarily terminated in the third quarter resulting
in severance costs totaling approximately $250.
(14) EARNINGS (LOSS) PER SHARE
The following information reconciles the number of shares used to compute basic
earnings (loss) per share to those used to compute diluted earnings (loss) per
share. The numerator amounts for each period presented are as shown on the
consolidated condensed statements of operations.
<TABLE>
<CAPTION>
Year Ended April 30,
-------------------------------------------
1996 1997 1998
--------- --------- ---------
<S> <C> <C> <C>
Weighted average number of shares outstanding 3,375,000 3,375,000 3,420,459
Effect of dilutive securities:
Stock Options - - 222,675
Warrants - - 159,962
--------- --------- ---------
Weighted average number of shares and
dilutive potential shares outstanding 3,375,000 3,375,000 3,803,096
========= ========= =========
</TABLE>
(15) EXTRAORDINARY ITEM
The Company incurred a $8,023 extraordinary loss related to the First Mortgage
Note offering completed during the third fiscal quarter. The extraordinary
charge relates primarily to a redemption premium, unamortized discount and debt
issue costs associated with the 2001 Notes.
(16) ACQUISITION
On October 28, 1997, the Company acquired all of the outstanding capital stock
of Waddell's Rebar Fabricators, Inc. The purchase price of the stock was
$3,137, subject to certain potential performance related payments. The Company
paid approximately $1,100 in cash and incurred $2,000 in debt related to this
acquisition. The acquisition was accounted for in accordance with the purchase
method. The fair value of tangible assets acquired and liabilities assumed was
$2,490 and $812, respectively. In addition, the Company recorded $1,459 as
excess of cost over net assets acquired (goodwill).
The following pro forma financial information reflects the results of operations
for the Company for the years ended April 30, 1997 and 1998 as though the
operations of Waddell had been considered combined as of May 1, 1996:
<TABLE>
<CAPTION>
Year Ended April 30,
--------------------------
<S> <C> <C>
1997 1998
-------- -------
Sales $173,880 186,656
======== =======
Income (loss) from operations before extraordinary item $ (3,278) 1,954
======== =======
Net loss $ (3,278) (6,069)
======== =======
Net loss per share:
Basic $ (.97) (1.77)
======== =======
Diluted $ (.97) (1.60)
======== =======
</TABLE>
38
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS, CONTINUED
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON
- ------- -------------------------------------------------------
ACCOUNTING AND FINANCIAL DISCLOSURE
--------------------------------------
None
PART III
--------
ITEM 10. DIRECTORS AND EXECUTIVE OFFICERS
- -------- --------------------------------
The information included under the caption entitled "Management" in Sheffield
Steel Corporation's Proxy Statement dated July 31, 1998, with respect to
directors and executive officers of the Company is incorporated herein by
reference in response to this item.
Because the Company does not have a class of securities registered under the
Securities and Exchange Act of 1934, as amended (the "Exchange Act"), none of
its directors, executive officers or ten percent or greater securityholders are
subject to the reporting requirements of Section 16(a) of the Exchange Act.
Accordingly, disclosure of delinquent filers pursuant to Item 405 of Regulation
S-K is not applicable.
ITEM 11. EXECUTIVE COMPENSATION
- -------- -----------------------
The information regarding compensation of the Company's executive officers is
included under the caption entitled "Executive Compensation" in Sheffield Steel
Corporation's Proxy Statement dated July 31, 1998, and is incorporated herein by
reference in response to this item.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND
- -------- ---------------------------------------------------
MANAGEMENT
----------
The information regarding beneficial ownership of the Company's Common Stock
by certain beneficial owners and by management is included under the caption
entitled "Share Ownership" in Sheffield Steel Corporation's Proxy Statement
dated July 31, 1998, and is incorporated herein by reference in response to this
item.
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS
- -------- --------------------------------------------------
The information regarding certain relationships and related transactions with
management and others is included under the caption entitled "Certain
Transactions" in Sheffield Steel Corporation's Proxy Statement dated July 31,
1998, and is incorporated herein by reference in response to this item.
39
<PAGE>
PART IV
-------
ITEM 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K
- -------- ---------------------------------------------------------------
ITEM 14(a)1. INDEX TO CONSOLIDATED FINANCIAL STATEMENTS COVERED BY
- ------------ ----------------------------------------------------------
REPORT OF INDEPENDENT AUDITORS
---------------------------------
The Consolidated Financial Statements of Sheffield Steel Corporation are
included in Item 8:
Independent Auditors' Report
Consolidated Balance Sheets - April 30, 1997 and 1998
Consolidated Statements of Operations - Years ended April 30, 1996, 1997
and 1998
Consolidated Statements of Stockholders' Equity - Years Ended April 30,
1996, 1997 and 1998
Consolidated Statements of Cash Flows - Years Ended April 30, 1996, 1997
and 1998
Notes to Consolidated Financial Statements - April 30, 1996, 1997 and
1998
ITEM 14(a)2. INDEX TO CONSOLIDATED FINANCIAL STATEMENT SCHEDULES
- ------------ --------------------------------------------------------
The following consolidated financial statement schedules of Sheffield Steel
Corporation are included in Item 14(d):
<TABLE>
<CAPTION>
Form 10-K Schedules Description Page Number
------------------- ----------- -----------
<S> <C> <C>
II Valuation and Qualifying Accounts 46
</TABLE>
Schedules other than those listed above have been omitted because they are
not applicable. Columns omitted from schedules filed have been omitted because
the information is not applicable.
40
<PAGE>
ITEM 14(a)3. EXHIBITS
- ------------ --------
The exhibits listed on the Exhibit Index below are filed or incorporated by
reference as part of this report and such Exhibit Index is hereby incorporated
herein by reference.
EXHIBIT INDEX
<TABLE>
<CAPTION>
Exhibit Sequentially
No. Description numbered page
------- ----------- -------------
<C> <S>
3.1 Certificate of Incorporation of the Registrant, as amended (Incorporated by reference to Exhibit
3.1 to Amendment No. 2 to the Registrant's Registration Statement on Form S-1 filed on
October 21, 1993).
3.2 By-Laws of the Registrant (Incorporated by reference to Exhibit 3.2 to Amendment No. 2 to the
Registrant's Registration Statement on Form S-1 filed on October 21, 1993).
4.1 Indenture for First Mortgage Notes (including form of First Mortgage Note issued thereunder),
dated as of December 1, 1997, between Sheffield Steel Corporation and State Street Bank and
Trust Company, as Trustee (Incorporated by reference to Exhibit 4.1 to the Registrant's
Regristration Statement on Form S-1 filed on January 9, 1998).
4.2 Form of New First Mortgage Note (Incorporated by reference to Exhibit 4.2 to the Registrant's
Regristration Statement on Form S-1 filed on January 9, 1998).
4.3 Intercreditor Agreement, dated December 1, 1997, among Sheffield Steel Corporation, NationsBank,
N.A. and State Street Bank and Trust Company, as Trustee (Incorporated by reference to Exhibit
4.2 to the Registrant's Registration Statement on Form S-1 filed on January 9, 1998).
4.4 Receivable and Inventory Financing Agreement, dated as of January 16, 1992, between HMK
Industries of Oklahoma, Inc., Sheffield Steel Corporation, Sheffield Steel Corporation-Joliet,
Sheffield Steel Corporation-Oklahoma City and NationsBank of Georgia, N.A. (Incorporated by
reference to Exhibit 4.2 to the Registrant's Registration Statement on Form S-1 filed on
August 17, 1993).
4.5 Guaranty, dated January 16, 1992, from HMK Industries of Oklahoma, Inc. to NationsBank of
Georgia, N.A. (Incorporated by reference to Exhibit 4.3 to the Registrant's Registration
Statement on Form S-1 filed on August 17, 1993).
4.6 Mortgage and Security Agreement, dated January 16, 1992, between Sheffield Steel Corporation and
NationsBank of Georgia, N.A. (Incorporated by reference to Exhibit 4.4 to the Registrant's
Registration Statement on Form S-1 filed on August 17, 1993).
4.7 Mortgage and Security Agreement, dated January 16, 1992, between Sheffield Steel
Corporation-Joliet and NationsBank of Georgia, N.A. (Incorporated by reference to Exhibit 4.5 to
the Registrant's Registration Statement on Form S-1 filed on August 17, 1993).
4.8 Stock Pledge Agreement, dated January 16, 1992, between HMK Industries of Oklahoma, Inc. and
NationsBank of Georgia, N.A. (Incorporated by reference to Exhibit 4.6 to the Registrant's
Registration Statement on Form S-1 filed on August 17, 1993).
</TABLE>
41
<PAGE>
<TABLE>
<C> <S>
4.9 First Amendment to Receivable and Inventory Financing Agreement, dated August 13, 1993 between
HMK Industries of Oklahoma, Inc., Sheffield Steel Corporation, Sheffield Steel
Corporation-Joliet, Sheffield Steel Corporation-Oklahoma City and NationsBank of Georgia, N.A.
(Incorporated by reference to Exhibit 4.24 to the Registrant's Registration Statement on Form
S-1 filed on October 6, 1993).
4.10 Warrant Agreement, dated November 1, 1993, between Sheffield Steel Corporation and Shawmut Bank
Connecticut, N.A., as Warrant Agent (Incorporated by reference to Exhibit 4.8 to the
Registrant's Quarterly Report on Form 10-Q for the quarter ended October 31, 1993).
4.13 Second Amendment to Receivable and Inventory Financing Agreement, dated November 1, 1993 between
Sheffield Steel Corporation-Oklahoma City, Sheffield Steel Corporation, and NationsBank of
Georgia, N.A. (Incorporated by reference to Exhibit 4.13 to the Registrant's Quarterly Report on
Form 10-Q for the quarter ended October 31, 1993).
4.14 Third Amendment to Receivable and Inventory Financing Agreement, dated December 13, 1994 between
Sheffield Steel Corporation and NationsBank of Georgia, N.A. (Incorporated by reference to
Exhibit 4.14 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended October 31,
1993).
4.15 Fourth Amendment to Receivable and Inventory Financing Agreement, dated October 30, 1995 between
Sheffield Steel Corporation and NationsBank of Georgia, N.A. (Incorporated by reference to
Exhibit 4.15 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended October 31,
1995).
4.16 Fifth Amendment to Receivable and Inventory Financing Agreement, dated April 19, 1996 between
Sheffield Steel Corporation and NationsBank of Georgia, N.A. (Incorporated by reference to
Exhibit 4.16 of the Registrant's Annual Report on Form 10-K for the fiscal year ended April 30,
1996).
4.17 Sixth Amendment to Receivable and Inventory Financing Agreement, dated December 1, 1997 between
Sheffield Steel Corporation and NationsBank, N.A. (Incorporated by reference to Exhibit 4.1 to
the Registrant's Regristration Statement on Form S-1 filed on January 9, 1998).
10.1 Income Tax Expense Allocation Policy and Tax Sharing Agreement, effective May 1, 1991 between
HMK Enterprises, Inc. and Sheffield Steel Corporation, Sheffield Steel Corporation-Joliet,
Sheffield Steel Corporation-Oklahoma City and Sand Springs Railway Company (Incorporated by
reference to Exhibit 10.2 to the Registrant's Registration Statement on Form S-1 filed on
August 17, 1993).
10.2 Form of Master Loan and Security Agreement between Sheffield Steel Corporation and the CIT
Group/Equipment Financing, Inc. dated July 14, 1994 (Incorporated by reference to Exhibit 10.6
to the Registrant's Annual Report on Form 10-K for the year ended April 30, 1994).
10.3 Restated Credit Agreement, dated April 23, 1991, between Sand Springs Railway Company and Bank
of Oklahoma (Incorporated by reference to Exhibit 4.7 to the Registrant's Registration Statement
on Form S-1 filed on August 17, 1993).
10.4 Amendment to Restated Credit Agreement, dated May 31, 1992, between Sand Springs Railway Company
and Bank of Oklahoma (Incorporated by reference to Exhibit 4.8 to the Registrant's Registration
Statement on Form S-1 filed on August 17, 1993).
10.5 Amendment to Assignment of Transportation Agreement, dated April 23, 1991 between Sand Springs
Railway Company and Bank of Oklahoma (Incorporated by reference to Exhibit 4.10 to the
Registrant's Registration Statement on Form S-1 filed on August 17, 1993).
</TABLE>
42
<PAGE>
<TABLE>
<C> <S>
10.6 Amendment to Assignment of User Contracts, dated April 23, 1991 between Sand Springs Railway
Company and Bank of Oklahoma (Incorporated by reference to Exhibit 4.11 to the Registrant's
Registration Statement on Form S-1 filed on August 17, 1993).
10.7 Amendment to Pledge and Security Agreement, dated April 23, 1991 between Sand Springs Railway
Company and Bank of Oklahoma (Incorporated by reference to Exhibit 4.12 to the Registrant's
Registration Statement on Form S-1 filed on August 17, 1993).
10.8 Amendment to Security Agreements, dated April 23, 1991 between Sand Springs Railway Company and
Bank of Oklahoma (Incorporated by reference to Exhibit 4.13 to the Registrant's Registration
Statement on Form S-1 filed on August 17, 1993).
10.9 Amendment to Real Estate Mortgage and Security Agreement, dated April 23, 1991 between Sand
Springs Railway Company and Bank of Oklahoma (Incorporated by reference to Exhibit 4.14 to the
Registrant's Registration Statement on Form S-1 filed on August 17, 1993).
10.10 Amendment to Real Estate Mortgage and Security Agreement, dated April 23, 1991 between Sand
Springs Railway Company and Bank of Oklahoma (Incorporated by reference to Exhibit 4.15 to the
Registrant's Registration Statement on Form S-1 filed on August 17, 1993).
10.11 Assignment of Transportation Agreement, dated December 10, 1987 between Sand Springs Railway
Company and Bank of Oklahoma (Incorporated by reference to Exhibit 4.16 to the Registrant's
Registration Statement on Form S-1 filed on August 17, 1993).
10.12 Assignment of User Contracts, dated December 10, 1987 between Sand Springs Railway Company and
Bank of Oklahoma (Incorporated by reference to Exhibit 4.17 to the Registrant's Registration
Statement on Form S-1 filed on August 17, 1993).
10.13 Security Agreement, dated December 10, 1987 between Sand Springs Railway Company and Bank of
Oklahoma (Incorporated by reference to Exhibit 4.18 to the Registrant's Registration Statement
on Form S-1 filed on August 17, 1993).
10.14 Security Agreement, dated December 10, 1987 between Sand Springs Railway Company and Bank of
Oklahoma (Incorporated by reference to Exhibit 4.19 to the Registrant's Registration Statement
on Form S-1 filed on August 17, 1993).
10.15 Real Estate Mortgage and Security Agreement, dated December 10, 1987 between Sand Springs
Railway Company and Bank of Oklahoma (Incorporated by reference to Exhibit 4.20 to the
Registrant's Registration Statement on Form S-1 filed on August 17, 1993).
10.16 Real Estate Mortgage and Security Agreement, dated December 10, 1987 between Sand Springs
Railway Company and Bank of Oklahoma (Incorporated by reference to Exhibit 4.21 to the
Registrant's Registration Statement on Form S-1 filed on August 17, 1993).
10.17 Pledge and Security Agreement, dated December 10, 1987 between Sand Springs Railway Company and
Bank of Oklahoma (Incorporated by reference to Exhibit 4.22 to the Registrant's Registration
Statement on Form S-1 filed on August 17, 1993).
10.18 Guaranty Agreement, dated December 10, 1987 between HMK Industries of Oklahoma, Inc. and Sand
Springs Railway Company (Incorporated by reference to Exhibit 4.23 to the Registrant's
Registration Statement on Form S-1 filed on August 17, 1993).
10.19 Second Amendment to Restated Credit Agreement, dated September 24, 1993 between Sand Springs
Railway Company and Bank of Oklahoma (Incorporated by reference to Exhibit 4.25 to the
Registrant's Registration Statement on Form S-1 filed on August 17, 1993).
</TABLE>
43
<PAGE>
<TABLE>
<C> <S>
10.20 Subordination Agreement dated November 10, 1995, between Sheffield Steel Corporation and the CIT
Group/Equipment Financing, Inc. (Incorporated by reference to Exhibit 10.25 to the Registrant's
Annual Report on Form 10-K for the fiscal year ended April 30, 1996).
10.21 First Amendment to Master Loan and Security Agreement between Sheffield Steel Corporation and
the CIT Group/Equipment Financing, Inc. dated April 25th, 1995. (Incorporated by reference to
Exhibit 10.26 to the Registrant's Annual Report on Form 10-K for the fiscal year ended April 30,
1996).
10.22 Second Amendment to Master Loan and Security Agreement between Sheffield Steel Corporation and
the CIT Group/Equipment Financing, Inc. dated July 2, 1996. (Incorporated by reference to
Exhibit 10.27 to the Registrant's Annual Report on Form 10-K for the fiscal year ended April 30,
1996).
*10.23 Sheffield Steel Corporation 1993 Employee, Director and Consultant Stock Option Plan.
(Incorporated by reference to Exhibit 10.1 to the Registrant's Registration Statement on Form
S-1 filed on October 21, 1993).
10.24 Second Amendment to Real Estate Mortgage and Security Agreement, dated July 31, 1996 between
Sand Springs Railway Company and Bank of Oklahoma, N.A. (Incorporated by reference to Exhibit
10.29 to the Registrant's Quarterly Report on Form 10-Q for the quarter ended July 31, 1996).
10.25 Third Amendment to Real Estate Mortgage and Security Agreement, dated July 31, 1996 between Sand
Springs Railway Company and Bank of Oklahoma, N.A. (Incorporated by reference to Exhibit 10.30
to the Registrant's Quarterly Report on Form 10-Q for the quarter ended July 31, 1996).
10.26 Fourth Amendment to Restated Credit Agreement, date July 31, 1996 between Sand Springs Railway
Company and Bank of Oklahoma, N.A. (Incorporated by reference to Exhibit 10.31 to the
Registrant's Quarterly Report on Form 10-Q for the quarter ended July 31, 1996).
10.27 Real Time Pricing Program Agreement dated June 1, 1996 between Sheffield Steel Corporation and
Public Service Company of Oklahoma. (Incorporated by reference to Exhibit 10.34 to the
Registrant's Quarterly Report on Form 10-Q for the quarter ended July 31, 1996).
10.28 Agreement between the United Steelworkers of America and the Sand Springs Division of Sheffield
Steel Corporation dated March 2, 1997. (Incorporated by reference to Exhibit 10.35 to the
Registrant's Annual Report on Form 10-K for the fiscal year ended April 30, 1997).
10.29 Fifth Amendment to Restated Credit Agreement, dated July 31, 1997 between Sand Springs Railway
Company and Bank of Oklahoma, N.A. (Incorporated by reference to Exhibit 10.36 to the
Registrant's Annual Report on Form 10-Q for the quarter ended July 31, 1997).
10.30 Management Services Agreement, dated December 5, 1997 between HMK Enterprises, Inc. and
Sheffield Steel Corporation. (Incorporated by reference to Exhibit 10.32 to the Registrant's
Registration Statement on Form S-1 filed on January 9, 1998).
10.31 Insurance Services Agreement, dated December 1, 1997 between Risk Management Solutions, Inc. and
Sheffield Steel Corporation. (Incorporated by reference to Exhibit 10.33 to the Registrant's
Registration Statement on Form S-1 filed on January 9, 1998).
10.32 Security Agreement between Sheffield Steel Corporation and Heller Financial, Inc. dated October 3, 1997.
(Incorporated by reference to Exhibit 37 to the Registrant's Quarterly Report on Form 10Q for the Quarter
ended October 31, 1997.)
</TABLE>
44
<PAGE>
<TABLE>
<C> <S>
10.33 Stock Purchase Agreement between Sheffield Steel Corporation, Waddell's Rebar Fabricators, Inc.
and the Stockholders of Waddell's Rebar Fabricators, Inc. dated October 27, 1997.
(Incorporated by reference to Exhibit 38 to the Registrant's Quarterly Report on Form 10Q for
the Quarter ended October 31, 1997.)
** 10.34 Master Loan and Security Agreement between Sheffield Steel Corporation and Sanwa Business Credit 49
Corporation dated June 30, 1998.
** 12 Statement re Computation of Ratio of Earnings to Fixed Charges. 57
** 13 Statement re Computation of EBITDA. 58
21 Subsidiaries of the Registrant (Incorporated by reference to Exhibit 21 to the Registrant's
Registration Statement on Form S-1 filed on August 17, 1993).
** 27 Financial Data Schedule.
** 99 Proxy Statement, dated July 31, 1998, in connection with the 1998 Annual Meeting of Stockholders
</TABLE>
* Executive Compensation Plans and Arrangements
** Filed herewith.
ITEM 14(b). REPORTS ON FORM 8-K
- ---------- -------------------
No reports on Form 8-K were filed during the fourth quarter ended April 30,
1998.
ITEM 14(c). EXHIBITS
- ---------- --------
The response to this portion of item 14 is submitted as a separate section of
this report.
ITEM 14(d). CONSOLIDATED FINANCIAL STATEMENT SCHEDULE
- ---------- -----------------------------------------
45
<PAGE>
Schedule II
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
Valuation and Qualifying Accounts
Years ended April 30, 1998, 1997 and 1996
(In thousands)
<TABLE>
<CAPTION>
Balance Charged to Balance
April 30, Costs and Deductions - April 30,
1997 Expenses Write-offs 1998
-------- ---------- ------------ ---------
<S> <C> <C> <C> <C>
Accounts receivable - allowance for
doubtful accounts $658 - - $658
==== ==== ==== ====
</TABLE>
<TABLE>
<CAPTION>
Balance Charged to Balance
April 30, Costs and Deductions - April 30,
1996 Expenses Write-offs 1997
-------- ---------- ------------ ---------
<S> <C> <C> <C> <C>
Accounts receivable - allowance for
doubtful accounts $658 - - $658
==== ==== ==== ====
</TABLE>
<TABLE>
<CAPTION>
Balance Charged to Balance
April 30, Costs and Deductions - April 30,
1995 Expenses Write-offs 1996
-------- ---------- ------------ ---------
<S> <C> <C> <C> <C>
Accounts receivable - allowance for
doubtful accounts $461 197 - $658
==== ==== ==== ====
</TABLE>
46
<PAGE>
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange
Act of 1934, the Registrant has duly caused this report to be signed on its
behalf by the undersigned thereunto duly authorized.
SHEFFIELD STEEL CORPORATION
July 25, 1998 /s/ Robert W. Ackerman
- -------------------------- -----------------------------
Date Robert W. Ackerman, President
and Chief Executive Officer
July 25, 1998 /s/ Stephen R. Johnson
- -------------------------- -----------------------------
Date Stephen R. Johnson, Vice President
and Chief Financial Officer
Pursuant to the requirements of the Securities Exchange Act of 1934, this report
has been signed below by the following persons on behalf of the registrant in
the capacity and on the dates indicated.
July 25, 1998 /s/ Robert W. Ackerman
- -------------------------- -------------------------------
Date Robert W. Ackerman, Director
July 25, 1998 /s/ Steven E. Karol
- -------------------------- -------------------------------
Date Steven E. Karol, Director
July 25, 1998 /s/ Dale S. Okonow
- -------------------------- -------------------------------
Date Dale S. Okonow, Director
July 25, 1998 /s/ Jane M. Karol
- -------------------------- -------------------------------
Date Jane M. Karol, Director
July 25, 1998 /s/ Howard H. Stevenson
- -------------------------- -------------------------------
Date Howard H. Stevenson, Director
July 25, 1998 /s/ John D. Lefler
- -------------------------- -------------------------------
Date John D. Lefler, Director
47
<PAGE>
================================================================================
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
Exhibits
to
Annual Report
on
Form 10-K
for the Fiscal Year Ended
April 30, 1998
SHEFFIELD STEEL CORPORATION
================================================================================
<PAGE>
EXHIBIT 10.34
MASTER LOAN AND SECURITY AGREEMENT
No. 00100
SECURED PARTY: SANWA BUSINESS CREDIT CORPORATION, One South Wacker Drive,
Chicago, IL, 60606.
DEBTOR: SHEFFIELD STEEL CORPORATION, 220 North Jefferson, Sand Springs, OK,
74063.
1. GRANT OF SECURITY INTEREST
For value received, the undersigned ("Debtor") hereby grants Sanwa Business
Credit Corporation ("Secured Party") a security interest in the items of
equipment set forth from time to time in each Loan Schedule and Supplemental
Security Agreement issued pursuant to this Master Loan and Security Agreement
including, without limitation, all accessories, additions, accessions,
alterations, attachments, parts, and repairs now or hereafter affixed thereto or
used in connection therewith and substitutions and replacements thereof or of
any part thereof and all proceeds of the foregoing (collectively, the
"Equipment") including, without limitation, the proceeds of any insurance
payable to Debtor or Secured Party with respect to the foregoing; and any cash
or cash equivalent deposits made by Debtor to Secured Party from time to time to
secure Debtor's obligations under all Installment Notes (the "Note" or "Notes")
issued pursuant to this Security Agreement and the obligations hereunder and the
obligations under any other agreement with Secured Party (collectively called
"Liabilities"), and Additional Collateral, as defined, and set forth from time
to time in each Loan Schedule and Supplemental Security Agreement issued
pursuant to this Master Loan and Security Agreement. The Equipment and
Additional Collateral are referred to herein as the "Collateral". The terms
"the Security Agreement," "this Security Agreement", the "Agreement" or "any
Security Agreement" shall mean and refer to any Loan Schedule and Supplemental
Security Agreement which incorporates the terms of this Master Loan and Security
Agreement, together with all exhibits, addenda, schedules, certificates, riders
and other documents and instruments executed and delivered in connection with
such Loan Schedule and Supplemental Security Agreement, all as the same may be
amended or modified from time to time. Each Loan Schedule shall constitute a
separate, distinct and independent security agreement and contractual obligation
of Debtor.
The security interest granted herein shall attach to each item of Collateral at
the earlier of (i) Debtor's execution and delivery of the Note, Loan Schedule
and Supplemental Security Agreement with respect to such item of Collateral; or
(ii) the time that Secured Party advances any funds to or on behalf of Debtor in
complete or partial payment for items of Equipment set forth on the respective
Loan Schedule and Supplemental Security Agreement.
2. DELIVERY OF NOTES
Subject to the terms and conditions hereof and of each Loan Schedule, Secured
Party agrees to make loans to Debtor with respect to the Equipment described on
any Loan Schedule and Supplemental Security Agreement, from time to time prior
to the Commitment Expiration Date set forth on such Loan Schedule, in an
aggregate principal amount not to exceed the amount of Secured Party's
Commitment set forth on such Loan Schedule, and with each such loan to be in an
amount not less than the Minimum Loan Amount set forth on such Loan Schedule.
The proceeds of each loan shall be applied by Debtor solely in payment of the
cost of (or in reimbursement to Debtor for payment of the cost of) the Equipment
identified in the Supplemental Security Agreement to which such loan relates.
The Equipment shall be satisfactory to Secured Party and,
<PAGE>
together with the Additional Collateral shall be more specifically described in
the applicable Supplemental Security Agreement.
Each loan shall be evidenced by a Note in the form of Exhibit A. Each Note
shall (i) be dated the date on which the loan evidenced thereby is made; (ii) be
payable in such number and type of installments of principal and interest and
bear such interest rate on the unpaid principal amount thereof as is specified
in the Note relating to such loan; and (iii) be payable on the dates and in the
amounts set forth therein and (iv) be in form and substance satisfactory to
Secured Party. No voluntary partial prepayment of any Note shall be permitted
and voluntary full prepayment of any Note shall, if permitted, be as set forth
in such Note.
3. CONDITIONS OF BORROWING.
Secured Party shall not be required to make any loan hereunder unless on the
closing date thereof all legal matters with respect to, and all legal documents
executed in connection with, the contemplated transactions are satisfactory to
Secured Party and all of the following conditions are met to the satisfaction of
Secured Party (except that (a), (b) and (c) are required in connection with the
initial loan only): (a) Secured Party has received a certificate signed by
Debtor's Secretary or Assistant Secretary, certifying the corporate proceedings
of Debtor authorizing the execution, delivery and performance of this Agreement
and the other documents to be executed in conjunction herewith and the
transactions contemplated hereby and thereby, and certifying the names of the
officers of Debtor authorized to execute this Agreement and the other documents
to be executed in conjunction herewith, and any related documents, together with
their specimen signatures; (b) the Guaranty, if any be required by Secured
Party, has been duly executed and delivered by the Guarantor thereunder and
Secured Party has received an executed counterpart thereof, together with a
certificate signed by Guarantor's Secretary or Assistant Secretary, certifying
the corporate proceedings of Guarantor authorizing the execution, delivery and
performance of the Guaranty, and certifying the names of the officers of
Guarantor authorized to execute the Guaranty and any related documents, together
with their specimen signatures; (c) if requested, Secured Party has received the
written opinions addressed to it of counsel for Debtor and Guarantor, if any, as
to such matters incident to the contemplated transactions as Secured Party may
reasonably request; (d) Debtor has executed and delivered to Secured Party a
Loan Schedule in the form of Exhibit B hereto with respect to the Equipment to
be financed by such loan; (e) Debtor has executed and delivered to Secured Party
the Note evidencing such loan, and a Supplemental Security Agreement in the form
of Exhibit C and a Delivery and Acceptance Certificate in the form of Exhibit D,
each describing the Equipment to be financed by such loan, and a Pay Proceeds
Letter in the form of Exhibit E describing in detail satisfactory to Secured
Party the amount(s), the payee(s) of the loan proceeds and the method of
payment; (f) the Equipment being financed by such loan has been delivered to and
accepted by Debtor, and Secured Party has received satisfactory evidence that it
is insured in accordance with the provisions hereof and that the Total Cost
thereof as set forth on Schedule A to the Supplemental Security Agreement has
been, or concurrently with the making of the loan shall be, fully paid; (g)
Secured Party has received copies of the invoices and bills of sale, if any
(including manufacturers' statements of origin in the case of titled vehicles),
covering Debtor's acquisition of the Equipment being financed with such loan and
showing Debtor as the owner thereof; (h) all filings, recordings, notations of
lien and other actions (including the obtaining of landlord and/or mortgagee
waivers) deemed necessary or desirable by Secured Party in order to perfect a
valid first priority security interest in the Equipment being financed by such
loan and Additional Collateral have been duly effected, and all fees, taxes and
other charges relating thereto have been paid; (i) the representations and
warranties contained in this Security Agreement and in any Guaranty are true and
correct with the same effect as if made on and as of such closing date and no
Default is in existence on such closing date or shall occur as a result of such
loan; (j) in the reasonable judgment of Secured Party, there has been no
material adverse change in the financial condition, business or operations of
Debtor or any Guarantor since the date of the then most recent financial
statement of
<PAGE>
Debtor or any Guarantor delivered to Secured Party; (k) Secured Party has
received from Debtor and any Guarantor such other documents and information as
Secured Party has reasonably requested; (l) the amount of such loan is not less
than the Minimum Loan Amount specified on the related Loan Schedule, and such
loan, when added to the aggregate amount of all loans theretofore made with
respect to the Equipment covered by such Loan Schedule, will not cause the
amount of Secured Party's Commitment specified on such Loan Schedule to be
exceeded; and (m) the Closing Date for such loan is a date not later than the
Commitment Expiration Date specified on the related Loan Schedule.
4. REPRESENTATIONS AND WARRANTIES
Debtor hereby warrants and agrees that (1) the Equipment (except any thereof
which, prior to the execution of this Agreement, Debtor shall have advised
Secured Party in writing consists of Equipment normally used in more than one
state) will be kept only at its address shown below (or if any other location is
shown with respect to any such Equipment in the description thereof herein, then
at such other location), unless Secured Party shall otherwise consent in
writing, provided that Equipment which is of a type normally used at more than
one location may be used throughout any jurisdictions agreed to by Secured Party
in writing so long as the principal place where such Equipment is kept does not
change; (2) it will immediately give written notice to Secured Party of any
change in the location of its chief executive office or chief place of business
and of any use of any of the Equipment in any jurisdiction other than a state in
which Secured Party shall have previously consented to the use of such
Equipment; (3) it has, or forthwith will acquire, full title to the Equipment
and the Additional Collateral, and will at all times keep the Equipment and the
Additional Collateral free of all liens and claims whatsoever, other than the
security interest hereunder; (4) no financing statement (other than (i) any
which may have been filed on behalf of Secured Party covering any of the
Equipment or Additional Collateral and (ii) those filed by State Street Bank
and Trust Company which , pursuant to the Indenture with Debtor dated as of
December 5, 1997 and pursuant to such financing statements, exclude the
Equipment) is on file in any public office; (5) it will from time to time,
execute such financing statements and other documents and pay the cost of filing
or recording the same and do such other acts and things at its expense, all as
Secured Party may request in its sole discretion, to establish and maintain a
valid perfected security interest in the Equipment and the Additional
Collateral, free of all other liens and claims whatsoever, to secure the payment
of the Liabilities, and any carbon, photographic or other reproduction of this
Agreement or of any such financing statement shall be sufficient for filing as a
financing statement; (6) it will not sell, transfer, lease or otherwise dispose
of any of the Collateral or any interest therein except with the prior written
consent of Secured Party; (7) it will at all times keep the Equipment and the
Additional Collateral in first class order and repair in accordance with
manufacturer's instructions, excepting any loss, damage or destruction which is
fully covered by proceeds of insurance; (8) it will at all times keep the
Equipment insured against loss, damage, theft and other risks, in such amounts,
with such companies and under policies in such form, all as shall be reasonably
satisfactory to Secured Party, which policies shall provide that loss thereunder
shall be payable to Secured Party as loss payee for property insurance and as
additional insured for liability insurance and Secured Party may apply any
proceeds of insurance which may be received by it toward payment of the
Liabilities, whether or not due, in such order of application as Secured Party
may determine and such policies or certificates thereof shall, if Secured Party
so requests, be deposited with Secured Party; (9) Secured Party may examine and
inspect the Equipment or any thereof, wherever located, at any reasonable time
or times; (10) Secured Party may from time to time, at its option, perform any
agreement of Debtor hereunder which Debtor shall fail to perform and take any
other action which Secured Party deems necessary for the maintenance or
preservation of any of the Collateral or its interest therein, and Debtor agrees
to forthwith reimburse Secured Party for all expenses of Secured Party in
connection with the foregoing, together with interest thereon at a rate equal to
the lesser of (i) two percent (2%) per annum over the rate of interest set
forth in the Note or (ii) the maximum rate permitted by applicable law, from the
date incurred until reimbursed by Debtor; and (11) none of the Equipment is or
will be fixtures or so related to particular real estate that an interest in
them arises under real estate law.
<PAGE>
5. COVENANTS
Debtor covenants and agrees that from and after the date hereof and so long as
Secured Party's Commitment hereunder or any of the Notes is outstanding:
A. Debtor will: (1) promptly give written notice to Secured Party of the
occurrence of any event of loss, damage or destruction of or to the Equipment or
Default, of the commencement or threat of any material litigation or proceedings
affecting Debtor or the Collateral, or of any dispute between Debtor and any
governmental regulatory body or other party that involves any of the Collateral;
(2) observe all requirements of any governmental authorities relating to the
performance of its obligations hereunder and to the use, operation or ownership
of the Equipment; (3) maintain its existence as a legal entity and obtain and
keep in full force and effect all rights, franchises, licenses and permits which
are necessary to the proper conduct of its business, and pay all fees, taxes,
assessments and governmental charges or levies imposed upon any of the
Collateral; (4) permit Secured Party or its authorized representative at any
reasonable time or times to inspect the Equipment and, following the occurrence
and during the continuation of a Default , at any reasonable time or times to
inspect the books and records of Debtor; (5) keep proper books of record and
account in accordance with generally accepted accounting principles; (6) furnish
to Secured Party the following financial statements all in reasonable detail,
prepared in accordance with generally accepted accounting principles applied on
a basis consistently maintained throughout the periods involved: (a) as soon as
available, but not later than 120 days after the end of each fiscal year, its
consolidated balance sheet as of the end of such fiscal year, and its
consolidated statements of income and changes in financial position for such
fiscal year, audited by certified public accountants acceptable to Secured Party
certified by its chief financial officer together with a compliance certificate
prepared by Debtor stating Debtor's compliance with this Security Agreement; (b)
as soon as available, but not later than 60 days after the end of each of the
first three quarterly periods of each fiscal year, its consolidated balance
sheet as of the end of such quarter and its consolidated statement of income for
such quarter and for the portion of the fiscal year then ended, certified by
Debtor's chief financial officer together with a compliance certificate prepared
by Debtor stating Debtor's compliance with this Security Agreement ; and (c)
promptly, such additional financial and other information as Secured Party may
from time to time reasonably request; (7) promptly, at its expense, execute and
deliver to Secured Party such instruments and documents, and take such action,
as Secured Party may from time to time reasonably request in order to carry out
the intent and purpose of this Agreement and to establish and protect the
rights, interests and remedies created, or intended to be created, in favor of
Secured Party hereby, including, without limitation, the execution, delivery,
recordation and filing of financing statements and continuation statements, and
Debtor hereby grants to Secured Party a power of attorney to effect any such
recordation or filing of financing statements; (8) warrant and defend its good
and marketable title to the Equipment, and Secured Party's perfected first
priority security interest in the Equipment and the Additional Collateral,
against all claims and demands whatsoever; (9) at its expense, take such action
(including the obtaining and recording of waivers) as may be necessary to
prevent any third party from acquiring any right or interest in the Collateral
by virtue of its being deemed to be real property, a part of real property, or a
part of other personal property (Debtor hereby agreeing that the Collateral
shall be and at all times remain separately identifiable personal property), and
if at any time any person shall claim any such right or interest, Debtor will
cause such claim to be waived in writing or otherwise eliminated to Secured
Party's satisfaction within 30 days after such claim shall have first become
known to it; (10) at its expense, if requested by Secured Party in writing,
attach to such item of Collateral a notice satisfactory to Secured Party
disclosing Secured Party's security interest in such item of Collateral; (11)
use the Equipment in a careful and proper manner, in accordance with the
manufacturer's or supplier's instructions or manuals, and only by competent and
duly qualified personnel.
<PAGE>
B. Debtor will not: (1) sell, convey, transfer, exchange, lease or otherwise
relinquish possession or dispose of any of the Collateral or attempt or offer to
do any of the foregoing; (2) create, assume or suffer to exist any lien upon the
Collateral except for the security interest created hereby and by each
Supplemental Security Agreement (other than those filed by State Street Bank and
Trust Company which , pursuant to the Indenture with Debtor dated as of
December 5, 1997 and pursuant to such financing statements, exclude the
Equipment) (3)(a) enter into any transaction of merger or consolidation unless
it is the surviving corporation and after giving effect to such merger or
consolidation its net worth equals or exceeds that which existed prior to such
merger or consolidation; (b) liquidate or dissolve; (c) sell, transfer or
otherwise dispose of all cumulative and in addition to any other remedy referred
to herein or otherwise available to Secured Party at law or in equity; and the
exercise by Secured Party of any one or more of such remedies shall not preclude
the simultaneous or later exercise by Secured Party of any or all such other
remedies. No express or implied waiver by Secured Party of a Default shall in
any way be, or be construed to be, a waiver of any other or subsequent Default.
The acceptance by Secured Party of any regular installment payment or any other
sum owing hereunder shall not constitute a waiver of any Default in existence at
the time, regardless of Secured Party's knowledge or lack of knowledge thereof
at the time of such acceptance, and shall not constitute a reinstatement of the
Security Agreement if Secured Party has sent Debtor a notice of default, unless
Secured Party shall have agreed in writing to reinstate the Security Agreement
and waive the Default.
6. MANDATORY PREPAYMENTS
In the event that an item of Equipment becomes destroyed, confiscated
or unfit for use for any reason whatsoever, Debtor will prepay and apply, and
there shall become due and payable, a principal amount of the outstanding loan
made to finance such item of Equipment that is equal to the Loan Value
(hereinafter defined) of such item of Equipment, together with accrued and
unpaid interest on the amount so prepaid. For purposes of this Section 5, the
"Loan Value" in respect of any item of Equipment, shall be an amount equal to
the product of (A) a fraction, the numerator of which is an amount equal to the
Total Cost of such item of Equipment for which settlement is then being made, as
set forth on the respective Loan Schedule and the denominator of which is the
aggregate Total Cost of all items of Equipment to which said Note relates, times
(B) the unpaid principal amount of the Note being prepaid immediately prior to
such prepayment.
7. DEFAULT; REMEDIES
The occurrence of any of the following events shall constitute a
Default (as such term is used herein): (a) within 5 days of Secured Party's
giving notice thereof to Debtor of amounts due, non-payment of any amount
payable under the Security Agreement or on any of the Liabilities or failure to
perform any agreement of Debtor contained herein; (b) if any statement,
representation or warranty of Debtor herein or in any other writing at any time
furnished by Debtor to Secured Party is untrue in any material respect as of the
date made and such Default is not cured by Debtor within fifteen days of Secured
Party's giving notice thereof to Debtor; (c) if any Obligor (which term, as used
herein, shall mean Debtor and each other party primarily or secondarily liable
on any of the Liabilities) becomes insolvent or unable to pay debts as they
mature or makes an assignment for the benefit of creditors, or any proceeding is
instituted by or against any Obligor alleging that such Obligor is insolvent or
unable to pay debts as they mature; (d) entry of any judgment against any
Obligor in excess of $100,000.00; (e) death of any Obligor who is a natural
person or of any general partner of any Obligor which is a partnership; (f)
dissolution, merger or consolidation, or transfer of a substantial part of the
property of any Obligor which is a corporation or a partnership; (g) default by
Debtor in any payment of principal or interest on any obligation for borrowed
money in excess of $100,000.00 or in any payment on any lease obligations,
beyond any period of grace provided with respect thereto or if Debtor shall
default in the performance of any other agreement, term or condition contained
in any agreement under which such obligation is created, if the effect of such
default is to cause or permit the holder or holders of such obligations to cause
such obligations to become due
<PAGE>
prior to stated maturity; (h) if Debtor is a corporation, if the current owners
of Debtor's voting stock shall at any time fail to own and control a majority of
Debtor's outstanding issued voting stock; or (i) there is a material adverse
change in Debtor's or any Obligor's financial condition or performance after
Debtor's execution of this Security Agreement. Whenever a Default shall be
existing, all Notes and all other Liabilities may, notwithstanding any
provisions thereof, at the option of Secured Party and without demand or notice
of any kind, be declared, and thereupon immediately shall become, due and
payable, and Secured Party may exercise from time to time any rights and
remedies available to it under applicable law. Debtor agrees, in case of
Default, to assemble, at its expense, all the Collateral at a convenient place
acceptable to Secured Party and to pay all costs of Secured Party of collection
of all Notes and all other Liabilities, and enforcement of rights hereunder,
including reasonable attorney's fees and legal expenses, and expenses of any
repairs to any realty or other property to which any of the Collateral may be
affixed or be a part. Without limiting the foregoing, upon Default Secured Party
may, to the fullest extent permitted by applicable law, without notice,
advertisement, hearing or process of law of any kind, (a) enter upon any
premises where any of the Collateral may be located and take possession of and
remove such Collateral, (b) sell any or all of the Collateral, free of all
rights and claims of Debtor therein and thereto, at any public or private sale,
and (c) bid for and purchase any or all of the Collateral at any such sale.
Debtor hereby expressly waives, to the fullest extent permitted by applicable
law, any and all notices, advertisements, hearings or process of law in
connection with the exercise by Secured Party of any of its rights and remedies
upon Default. If any notification of intended disposition of any of the
Collateral is required by law, such notification, if mailed, shall be deemed
reasonably and properly given if mailed at least five days before such
disposition, postage prepaid, addressed to Debtor either at the address shown
below or at any other address of Debtor appearing on the records of Secured
Party. Any notice to Debtor may, if there is more than one undersigned, be given
to all of the undersigned care of any one of the undersigned selected by Secured
Party. Any proceeds of any of the Collateral may be applied by Secured Party to
the payment of expenses in connection with the repossession, storage, sale,
preparation for sale and the like, of the Collateral, including reasonable
attorney's fees and legal expenses, and any balance of such proceeds may be
applied by Secured Party toward the payment of such of the Liabilities, and in
such order or application, as Secured Party may from time to time elect and
Debtor shall remain liable for any deficiency.
8. NOTICES
All notices and other communications hereunder shall be in writing and shall be
transmitted by hand, overnight courier, United States first class mail or
certified mail (return receipt requested), postage prepaid. Such notices and
other communications shall be addressed to the respective party at the address
set forth above or at such other address as any party may from time to time
designate by notice duly given in accordance with this section. Notices shall
be deemed received on the earlier of (i) three days after deposit, postage
prepaid, in the United States mail, if sent by United States first class,
certified, or registered mail; (ii) the next day after delivery to an overnight
courier, expenses prepaid, or (iii) the date of actual delivery if delivered by
hand.
9. NO WAIVER OF RIGHTS
No delay on the part of Secured Party in the exercise of any right or
remedy shall operate as a waiver thereof, and no single or partial exercise by
Secured Party of any right or remedy shall preclude other or further exercise
thereof or the exercise of any other right or remedy. If more than one party
shall execute this Agreement, the terms "undersigned" and "Debtor" shall mean
all parties signing this Agreement and each of them, and all such parties shall
be jointly and severally obligated hereunder. The neuter pronoun, when used
herein, shall include the masculine and feminine and also the plural. If this
Agreement is not dated when executed by Debtor, Secured Party is authorized,
without notice to Debtor, to date this Agreement. The rights and privileges of
Secured Party hereunder shall inure to the benefit of its successors and
assigns.
<PAGE>
10. WAIVER OF JURY TRIAL
Debtor and Secured Party waive any right to a trial by jury in any action to
enforce or defend any matter arising from or related to (i) this Agreement; (ii)
any Note; or (iii) any documents or agreements evidencing or relating to this
Agreement or any Note.
11. GOVERNING LAW; JURISDICTION
THIS AGREEMENT HAS BEEN DELIVERED AT CHICAGO, ILLINOIS AND SHALL BE
GOVERNED BY AND CONSTRUED IN ACCORDANCE WITH THE LAWS OF THE STATE OF ILLINOIS.
Debtor hereby irrevocably submits to the jurisdiction of any state or federal
courts located in Cook County, Illinois, over any action or proceeding to
enforce or defend any matter arising from or related to (i) this Agreement;
(ii) any Note; or (iii) any document or agreement evidencing or relating to this
Agreement or any Note. Debtor hereby irrevocably waives, to the fullest extent
it may effectively do so, the defense of an inconvenient forum to the
maintenance of any such action or proceeding. Debtor agrees that a final
judgment in any such action or proceeding shall be conclusive and may be
enforced in any other jurisdiction by suit on the judgment or in any other
manner provided by law. Debtor agrees not to institute any legal action or
proceeding against Secured Party or any director, officer, employee, agent or
property of Secured Party, concerning any matter arising out of or relating to
this Agreement, any Note, or any document or agreement evidencing or relating to
this Agreement or any Note in any court other than one located in Cook County,
Illinois. Nothing in this paragraph shall affect or impair Secured Party's right
to serve legal process in any manner permitted by law, or Secured Party's right
to bring any action or proceeding against Debtor, or the property of Debtor, in
the courts of any other jurisdiction. Wherever possible each provision of this
Agreement shall be interpreted in such manner as to be effective and valid under
applicable law, but if any provision of this Agreement shall be prohibited by or
invalid under applicable law, such provision shall be ineffective to the extent
of such prohibition or invalidity, without invalidating the remainder of such
provisions or the remaining provisions of this Agreement.
[REMAINDER OF PAGE INTENTIONALLY LEFT BLANK]
<PAGE>
IN WITNESS WHEREOF, this Security Agreement has been duly executed as of the
30th day of June, 1998.
DEBTOR:
SHEFFIELD STEEL CORPORATION
BY: /s/ Stephen R. Johnson
-----------------------------------
NAME: Stephen R. Johnson
---------------------------------
TITLE: V.P. and CFO
--------------------------------
CORPORATE SEAL
Address: 220 N. Jefferson
------------------------------
Sand Springs, OK 74063
- ----------------------------------------
- ----------------------------------------
SECURED PARTY:
SANWA BUSINESS CREDIT CORPORATION
BY: /s/ David G. Roeder
------------------------------------
NAME: David G. Roeder
----------------------------------
TITLE: Vice-President
----------------------------------
<PAGE>
EXHIBIT 12
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
COMPUTATION OF RATIO OF EARNINGS TO FIXED CHARGES
(In thousands, except ratios)
<TABLE>
<CAPTION>
Years Ended April 30,
--------------------------------------------------------------------------
1994 1995 1996 1997 1998
------------- ------------- -------------- ------------- -------------
<S> <C> <C> <C> <C> <C>
Fixed charges, as defined:
Interest on long-term debt $ 7,384 $10,127 $11,758 $11,769 $12,300
Amortization of debt issue costs 422 474 476 368 383
------- ------- ------- ------- -------
Total fixed charges $ 7,806 $10,601 $12,234 $12,137 $12,683
======= ======= ======= ======= =======
Earnings, as defined:
Income (loss) before income taxes
and extraordinary item $(2,353) $ 2,022 $(3,091) $(3,509) $ 1,302
Fixed charges (as shown above) 7,806 10,601 12,234 12,137 12,683
------- ------- ------- ------- -------
Earnings available for fixed $ 5,453 $12,623 $ 9,143 $ 8,628 $13,985
charges ======= ======= ======= ======= =======
Ratio of earnings to fixed charges .70x 1.19x .75x .71x 1.10x
======= ======= ======= ======= =======
</TABLE>
<PAGE>
EXHIBIT 13
SHEFFIELD STEEL CORPORATION AND SUBSIDIARIES
COMPUTATION OF EARNINGS BEFORE INTEREST, TAXES, DEPRECIATION,
AMORTIZATION, AND NON-CASH POST-RETIREMENT BENEFIT EXPENSE (EBITDA)
(IN THOUSANDS)
<TABLE>
<CAPTION>
Years Ended April 30,
----------------------------------------------
1996 1997 1998
------- ------- -------
<S> <C> <C> <C>
Net income (loss) before extraordinary item $(3,091) (3,509) 1,302
Interest expense 11,733 11,769 12,300
Income tax expense - - -
Depreciation and amortization 6,567 6,775 7,112
Loss on retirement of equipment - - 180
Accrual of post-retirement benefit
expense, net of cash paid 1,747 1,272 1,893
------- ------- -------
EBITDA $16,956 $16,307 $22,787
======= ======= =======
Restructuring expense - 1,320 -
------- ------- -------
EBITDA, excluding restructuring expense $16,956 $17,627 $22,787
======= ======= =======
</TABLE>
<TABLE> <S> <C>
<PAGE>
<ARTICLE> 5
<LEGEND>
THIS SCHEDULE CONTAINS SUMMARY FINANCIAL INFORMATION EXTRACTED FROM FINANCIAL
STATEMENTS FOR THE TWELVE MONTHS ENDED APRIL 30, 1998 AND IS QUALIFIED IN ITS
ENTIRETY BY REFERENCE TO SUCH FINANCIAL STATEMENTS.
</LEGEND>
<MULTIPLIER> 1,000
<S> <C>
<PERIOD-TYPE> YEAR
<FISCAL-YEAR-END> APR-30-1998
<PERIOD-START> MAY-01-1997
<PERIOD-END> APR-30-1998
<CASH> 2,590
<SECURITIES> 0
<RECEIVABLES> 20,994
<ALLOWANCES> 658
<INVENTORY> 33,548
<CURRENT-ASSETS> 60,935
<PP&E> 68,730
<DEPRECIATION> 56,271
<TOTAL-ASSETS> 143,618
<CURRENT-LIABILITIES> 32,973
<BONDS> 112,682
0
0
<COMMON> 36
<OTHER-SE> (13,162)
<TOTAL-LIABILITY-AND-EQUITY> 143,618
<SALES> 185,077
<TOTAL-REVENUES> 185,077
<CGS> 148,496
<TOTAL-COSTS> 148,496
<OTHER-EXPENSES> 7,112
<LOSS-PROVISION> 0
<INTEREST-EXPENSE> 12,300
<INCOME-PRETAX> 1,302
<INCOME-TAX> 495
<INCOME-CONTINUING> 1,797
<DISCONTINUED> 0
<EXTRAORDINARY> (8,023)
<CHANGES> 0
<NET-INCOME> (6,226)
<EPS-PRIMARY> (1.82)
<EPS-DILUTED> (1.64)
</TABLE>
