<PAGE>
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
------------------------
FORM 10-Q
(MARK ONE)
<TABLE>
<S> <C>
/X/ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT
OF 1934
FOR THE QUARTERLY PERIOD ENDED JUNE 28, 1997
OR
/ / TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE
ACT OF 1934
</TABLE>
FOR THE TRANSITION PERIOD FROM TO
COMMISSION FILE NUMBER 1-10606
------------------------
CADENCE DESIGN SYSTEMS, INC.
(Exact name of registrant as specified in its charter)
<TABLE>
<S> <C>
DELAWARE 77-0148231
(State or other jurisdiction (I.R.S. Employer
of incorporation or organization) Identification No.)
555 RIVER OAKS PARKWAY, 95134
SAN JOSE, CALIFORNIA (Zip Code)
(Address of principal executive
offices)
</TABLE>
Registrant's telephone number, including area code: (408) 943-1234
Indicate by check mark whether the registrant (1) has filed all reports
required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the
registrant was required to file such reports), and (2) has been subject to such
filing requirements for the past 90 days.
Yes _X_ No ___
At July 31, 1997 there were 101,583,770 shares of the registrant's Common
Stock, $0.01 par value outstanding.
- --------------------------------------------------------------------------------
- --------------------------------------------------------------------------------
<PAGE>
CADENCE DESIGN SYSTEMS, INC.
INDEX
<TABLE>
<CAPTION>
PAGE
---------
<S> <C> <C>
</TABLE>
PART I. FINANCIAL INFORMATION
<TABLE>
<S> <C> <C>
Item 1. Financial Statements.........................................................
Condensed Consolidated Balance Sheets: 3
June 28, 1997 and December 28, 1996........................................
Condensed Consolidated Statements of Income: 4
Three and Six Months Ended June 28, 1997 and June 29, 1996.................
Condensed Consolidated Statements of Cash Flows: 5
Six Months Ended June 28, 1997 and June 29, 1996...........................
Notes to Condensed Consolidated Financial Statements......................... 6
Item 2. Management's Discussion and Analysis of 9
Financial Condition and Results of Operations..............................
</TABLE>
PART II. OTHER INFORMATION
<TABLE>
<S> <C> <C>
Item 1. Legal Proceedings............................................................ 15
Item 4. Submission of Matters to a Vote of Security Holders.......................... 15
Item 6. Exhibits and Reports on Form 8-K............................................. 16
Signatures................................................................... 17
</TABLE>
2
<PAGE>
PART I. FINANCIAL INFORMATION
Item 1. Financial Statements
CADENCE DESIGN SYSTEMS, INC.
CONDENSED CONSOLIDATED BALANCE SHEETS
(IN THOUSANDS)
<TABLE>
<CAPTION>
JUNE 28, DECEMBER
1997 28, 1996
----------- -----------
(UNAUDITED)
<S> <C> <C>
ASSETS
Current Assets
Cash and cash investments.......................................... $ 316,758 $ 284,512
Short-term investments............................................. 44,567 1,015
Accounts receivable, net........................................... 128,366 148,449
Inventories........................................................ -- 8,133
Prepaid expenses and other......................................... 58,705 49,026
----------- -----------
Total current assets............................................. 548,396 491,135
Property, Plant and Equipment, net................................... 188,683 160,927
Software Development Costs, net...................................... 17,954 21,295
Purchased Software and Intangibles, net.............................. 8,206 10,267
Other Non-Current Assets............................................. 70,009 33,377
----------- -----------
Total assets..................................................... $ 833,248 $ 717,001
----------- -----------
----------- -----------
LIABILITIES AND STOCKHOLDERS' EQUITY
Current Liabilities
Current portion of capital lease obligations....................... $ 1,421 $ 3,349
Accounts payable and accrued liabilities........................... 127,221 116,174
Income taxes payable............................................... 4,692 4,901
Deferred revenue................................................... 107,737 107,154
----------- -----------
Total current liabilities........................................ 241,071 231,578
----------- -----------
Long-Term Liabilities
Long-term debt..................................................... 2,165 20,292
Minority interest liability........................................ 968 15,205
Other long-term liabilities........................................ 25,978 22,378
----------- -----------
Total long-term liabilities...................................... 29,111 57,875
----------- -----------
Stockholders' Equity
Common stock and capital in excess of par value.................... 651,902 603,430
Treasury stock at cost............................................. (309,281) (325,637)
Retained earnings.................................................. 225,037 151,596
Accumulated translation adjustment................................. (4,592) (1,841)
----------- -----------
Total stockholders' equity....................................... 563,066 427,548
----------- -----------
Total liabilities and stockholders' equity......................... $ 833,248 $ 717,001
----------- -----------
----------- -----------
</TABLE>
The accompanying notes are an integral part of these condensed consolidated
financial statements.
3
<PAGE>
CADENCE DESIGN SYSTEMS, INC.
CONDENSED CONSOLIDATED STATEMENTS OF INCOME
(IN THOUSANDS, EXCEPT PER SHARE AMOUNTS)
(UNAUDITED)
<TABLE>
<CAPTION>
THREE MONTHS ENDED SIX MONTHS ENDED
---------------------- ----------------------
JUNE 28, JUNE 29, JUNE 28, JUNE 29,
1997 1996 1997 1996
---------- ---------- ---------- ----------
<S> <C> <C> <C> <C>
REVENUE
Product........................................................ $ 116,540 $ 98,376 $ 218,863 $ 188,558
Services....................................................... 39,614 26,529 73,368 49,627
Maintenance.................................................... 54,312 52,121 105,784 102,271
---------- ---------- ---------- ----------
Total revenue................................................ 210,466 177,026 398,015 340,456
---------- ---------- ---------- ----------
COSTS AND EXPENSES
Cost of product................................................ 10,090 12,885 19,043 23,772
Cost of services............................................... 27,868 18,605 52,062 36,202
Cost of maintenance............................................ 5,634 6,275 11,386 11,430
Marketing and sales............................................ 59,689 52,961 114,858 105,154
Research and development....................................... 33,799 29,221 65,052 55,234
General and administrative..................................... 13,638 13,646 25,842 26,658
Unusual items.................................................. 22,366 -- 34,114 --
---------- ---------- ---------- ----------
Total costs and expenses..................................... 173,084 133,593 322,357 258,450
---------- ---------- ---------- ----------
INCOME FROM OPERATIONS........................................... 37,382 43,433 75,658 82,006
Other income (expense), net...................................... 3,255 (764) 18,011 (1,159)
---------- ---------- ---------- ----------
Income before provision for income taxes......................... 40,637 42,669 93,669 80,847
Provision for income taxes....................................... 12,191 14,081 28,101 26,680
---------- ---------- ---------- ----------
NET INCOME....................................................... $ 28,446 $ 28,588 $ 65,568 $ 54,167
---------- ---------- ---------- ----------
---------- ---------- ---------- ----------
NET INCOME PER SHARE............................................. $ .27 $ .31 $ .64 $ .59
---------- ---------- ---------- ----------
---------- ---------- ---------- ----------
Weighted average common and common equivalent shares
outstanding.................................................... 106,458 91,841 103,055 91,557
---------- ---------- ---------- ----------
---------- ---------- ---------- ----------
</TABLE>
The accompanying notes are an integral part of these condensed consolidated
financial statements.
4
<PAGE>
CADENCE DESIGN SYSTEMS, INC.
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(IN THOUSANDS)
(UNAUDITED)
<TABLE>
<CAPTION>
SIX MONTHS ENDED
--------------------
JUNE 28, JUNE 29,
1997 1996
--------- ---------
<S> <C> <C>
CASH AND CASH INVESTMENTS AT BEGINNING OF PERIOD............................................ $ 284,512 $ 84,867
--------- ---------
CASH FLOWS FROM OPERATING ACTIVITIES
Net income.................................................................................. 65,568 54,167
Adjustments to reconcile net income to net cash provided by operating activities:
Depreciation and amortization............................................................. 22,959 24,665
Deferred income taxes, noncurrent......................................................... (4,242) (3,408)
Write-offs of equipment and other long-term assets........................................ 1,834 1,690
Other long-term liabilities and minority interest expense................................. 2,798 17
Gain on sale of subsidiary stock.......................................................... (13,061) --
Write-off of in-process research and development.......................................... 4,860 --
Changes in current assets and liabilities:
Accounts receivable..................................................................... 6,848 (14,390)
Inventories............................................................................. -- (2,229)
Prepaid expenses and other.............................................................. (1,727) (678)
Accrued liabilities and payables........................................................ 17,615 8,406
Income taxes payable.................................................................... 26,139 11,755
Deferred revenue........................................................................ (3,578) 23,680
--------- ---------
Net cash provided by operating activities............................................. 126,013 103,675
--------- ---------
CASH FLOWS FROM INVESTING ACTIVITIES
Maturities of short-term investments.................................................... 13,059 8,200
Purchases of short-term investments..................................................... (57,625) (6,859)
Purchases of property and equipment..................................................... (46,147) (24,554)
Capitalization of software development costs............................................ (6,800) (6,897)
Purchased software and intangibles and other assets..................................... (17,113) (14,459)
Net proceeds from sale of subsidiary stock.............................................. 18,582 --
Effect of IMS deconsolidation on cash................................................... (9,536) --
Effect of CCT acquisition on cash....................................................... 42,358 --
Sale of put warrants.................................................................... -- 3,425
Purchase of call options................................................................ -- (3,425)
--------- ---------
Net cash used for investing activities................................................ (63,222) (44,569)
--------- ---------
CASH FLOWS FROM FINANCING ACTIVITIES
Principal payments on capital lease obligations and long-term debt...................... (20,768) (1,016)
Net proceeds from issuance of long-term debt............................................ -- 19,763
Increase in leases...................................................................... 1,239 --
Sale of common stock.................................................................... 12,693 13,169
Purchase of treasury stock.............................................................. (21,079) (80,905)
Purchase of warrant..................................................................... -- (4,347)
--------- ---------
Net cash used for financing activities................................................ (27,915) (53,336)
--------- ---------
EFFECT OF EXCHANGE RATE CHANGES ON CASH..................................................... (2,630) (1,991)
--------- ---------
INCREASE IN CASH AND CASH INVESTMENTS....................................................... 32,246 3,779
--------- ---------
CASH AND CASH INVESTMENTS AT END OF PERIOD.................................................. $ 316,758 $ 88,646
--------- ---------
--------- ---------
</TABLE>
The accompanying notes are an integral part of these condensed consolidated
financial statements.
5
<PAGE>
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(UNAUDITED)
BASIS OF PRESENTATION
The condensed consolidated financial statements included herein have been
prepared by the Company, without audit, pursuant to the rules and regulations of
the Securities and Exchange Commission. Certain information and footnote
disclosures normally included in financial statements prepared in accordance
with generally accepted accounting principles have been condensed or omitted
pursuant to such rules and regulations. However, the Company believes that the
disclosures are adequate to make the information presented not misleading. These
condensed consolidated financial statements should be read in conjunction with
the financial statements and the notes thereto included in the Company's annual
report on Form 10-K for the fiscal year ended December 28, 1996.
The unaudited condensed consolidated financial statements included herein
reflect all adjustments (which include only normal, recurring adjustments) that
are, in the opinion of management, necessary to state fairly the results for the
periods presented. The results for such periods are not necessarily indicative
of the results to be expected for the full fiscal year.
The preparation of financial statements in conformity with generally
accepted accounting principles requires management to make estimates and
assumptions that affect the reported amounts of assets and liabilities and
disclosure of contingent assets and liabilities at the date of the financial
statements and the reported amounts of revenues and expenses during the
reporting period. Actual results could differ from those estimates.
In February 1997, the Company and its subsidiary, Integrated Measurement
Systems, Inc. (IMS), sold to the public 1.7 million shares of common stock which
reduced the Company's ownership in IMS to approximately 37% from 55%. Thus, for
the three months and six months ended June 28, 1997, the Company's investment in
IMS is recorded using the equity method of accounting. For the comparable
periods of the prior year, the results of IMS are consolidated with the
Company's results.
In May 1997, the Company merged with Cooper & Chyan Technology, Inc. (CCT),
as described below, which merger was treated as a pooling of interests for
accounting purposes.
The Company's fiscal year is determined based upon the 52 - 53 week period
ending on the Saturday closest to December 31.
ACQUISITION
On May 7, 1997, the Company merged with CCT, the software products of which
are used to design sophisticated integrated circuits and high-speed printed
circuit boards. In connection therewith, the Company issued approximately 11.4
million shares of common stock. In addition, approximately 1.9 million shares of
the Company's common stock may be issued in connection with the exercise of CCT
stock options assumed by the Company. The acquisition was accounted for as a
pooling of interests. Results for prior periods have not been restated due to
immateriality.
NEW ACCOUNTING STANDARDS
In February 1997, the Financial Accounting Standards Board (FASB) issued
Statement of Financial Accounting Standard (SFAS) No. 128, "Earnings per Share",
which will be adopted by the Company in the fourth quarter of 1997. SFAS No. 128
requires companies to compute net income per share under two different methods,
basic and diluted, and to disclose the methodology used for the calculation. If
SFAS No. 128 had been applied by the Company for the three months and six months
ended June 28, 1997, basic net income per share would have been $0.29 and $0.71,
respectively, and diluted net income per share would have been $0.27 and $0.64,
respectively. For the three months and six months ended June 29, 1996, basic net
income per share for would have been $0.37 and $0.70, respectively, and diluted
net income per share would have been $0.31 and $0.59, respectively.
6
<PAGE>
In February 1997, the FASB issued SFAS No. 129 "Disclosure of Information
About Capital Structure", which will be adopted by the Company in the fourth
quarter of 1997. SFAS No. 129 requires companies to disclose certain information
about their capital structure. The Company anticipates that SFAS No. 129 will
not have a material impact on its financial statement disclosures.
NET INCOME PER SHARE
Net income per share for each period is calculated by dividing net income by
the weighted average shares of common stock and common stock equivalents
outstanding during the period using the modified treasury stock method. Common
stock equivalents consist of shares issuable upon the exercise of outstanding
common stock options and warrants. Fully diluted net income per share is
substantially the same as primary net income per share.
INVENTORIES
Due to the change in accounting for IMS described above, no inventories were
recorded at June 28, 1997. Inventories totaling $8.1 million at December 28,
1996, consisting primarily of test equipment, were stated at the lower of cost
(first-in, first-out method) or market. Cost included labor, material, and
manufacturing overhead. Inventories consisted of the following (in millions):
raw materials and supplies - $4.0; work-in-process - $3.0, and finished goods -
$1.1.
NOTE PAYABLE
In April 1997, the Company repaid a real estate loan which was classified as
short-term and had an outstanding balance of $19.3 million at the date of
repayment. The original repayment schedule required various quarterly principal
payments through the year 2005.
COMMITMENTS AND CONTINGENCIES
The Company filed a complaint in the United States District Court for the
Northern District of California on December 6, 1995 against Avant! Corporation
(a company formed by a merger of companies formerly known as ArcSys, Inc. and
ISS, Inc. (Avant!)) and certain of its employees for misappropriation of trade
secrets, copyright infringement, conspiracy and other illegalities.
On January 16, 1996, Avant! filed various counterclaims against the Company
and the Companys President and CEO, and on April 12, 1996, Avant! filed a First
Amended Counterclaim. The amended counterclaim alleges, INTER ALIA, that the
Company and its President and CEO had cooperated with the Santa Clara County
District Attorney and initiated and pursued its complaint against Avant! for
anticompetitive reasons, engaged in wrongful activity in an attempt to
manipulate Avant!'s stock price and utilized certain pricing policies and other
acts to unfairly compete against Avant! in the marketplace. The amended
counterclaim also alleges that certain Company insiders engaged in illegal
insider trading with respect to Avant!'s stock. The Company and its President
and CEO believe that each has meritorious defenses to Avant!'s claims, and each
intends to defend such action vigorously. By an order dated July 13, 1996, the
court bifurcated Avant!'s counterclaim from the Company's complaint.
On April 19, 1996, the Company filed a motion seeking a preliminary
injunction to prevent further use of Cadence copyrighted code and trade secrets
by Avant!. On March 18, 1997, the Court issued an order in which it granted in
part and denied in part that motion. The Company has filed an appeal as to
certain aspects of the Court's order. The Court has not yet set a trial date. By
an order dated July 22, 1997, the Court stayed most activity in the case pending
in Federal District Court and ordered Avant! to post a $5 million bond, in light
of criminal proceedings pending against Avant! and several of its executives.
The Company intends to pursue its claim vigorously.
MANAGEMENT BELIEVES THAT THE ULTIMATE RESOLUTION OF THE DISPUTES AND
LITIGATION MATTERS DISCUSSED ABOVE WILL NOT HAVE A MATERIAL ADVERSE IMPACT ON
THE COMPANY'S FINANCIAL POSITION OR RESULTS OF OPERATIONS.
7
<PAGE>
DERIVATIVES AND OTHER FINANCIAL INSTRUMENTS
The Company has a seasoned authorized stock repurchase program under which
it repurchases common stock to satisfy estimated requirements for shares to be
issued under its Employee Stock Purchase Plan (ESPP). Such repurchases are
intended to cover the Company's expected re-issuances under the ESPP for the
next 12 months. The Company also had an unseasoned systematic repurchase program
for anticipated re-issuances of stock under the Company's stock option plans. In
connection with the merger with CCT described above, the Company rescinded its
stock repurchase program, with the exception of continued systematic stock
repurchases under its seasoned stock repurchase program for the Company's ESPP.
Since 1994, as part of its authorized stock repurchase program, the Company
has sold put warrants through private placements. As of June 28, 1997, there
were outstanding 0.7 million put warrants which entitle the holder to sell one
share of common stock to the Company on a specified date at a specified price
ranging from $35.27 to $36.11 per share. Additionally, during this same period,
the Company purchased call options that entitle the Company to buy, on a
specified date, one share of common stock at a specified price. As of June 28,
1997, the Company had 0.5 million outstanding call options at prices ranging
from $35.52 to $36.36 per share to satisfy anticipated stock repurchase
requirements under the Company's seasoned systematic repurchase program.
The Company has the right to settle the put warrants with stock, cash or a
combination of stock and cash equal to the difference between the exercise price
and the fair value at the date of exercise. Settlement of the put warrants with
stock could cause the Company to issue a substantial number of shares, depending
on the exercise price of the put warrants and the per share fair value of the
Company's common stock at the time of exercise. In addition, settlement of put
warrants in stock or cash could lead to the disposition by put warrant holders
of shares of the Company's common stock that such holders may have accumulated
in anticipation of the exercise of the put warrants or call options, which may
impact the trading price of the Company's common stock. At June 28, 1997, the
Company had both the unconditional right and the intent to settle these put
warrants with stock and, therefore, no amount was classified out of
stockholders' equity in the accompanying balance sheet. The effect of the
exercise of these put warrants and call options is reported in stockholders'
equity.
The Company enters into certain foreign currency forward exchange contracts
(forward contracts) to hedge the impact of foreign currency fluctuations. Due to
the short-term nature of these forward contracts, the unrealized gains and
losses were not material at June 28, 1997, and will be recorded when realized.
The Company classifies its short-term investments in debt securities as
"held-to-maturity." Accordingly, these investments are valued using the
amortized cost method.
8
<PAGE>
Item 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND
RESULTS OF OPERATIONS
Except for the historical information contained herein, the following
discussion contains forward looking statements that involve risks and
uncertainties. The Company's actual results could differ materially from those
discussed herein. Factors that could cause or contribute to such differences
include, but are not limited to, those discussed below in Factors That May
Affect Future Results.
RESULTS OF OPERATIONS
REVENUE
<TABLE>
<CAPTION>
THREE MONTHS ENDED
SIX MONTHS ENDED
------------------- -------------------
JUNE 28, JUNE 29, JUNE 28, JUNE 29,
1997 1996 % CHANGE 1997 1996 % CHANGE
-------- -------- -------- -------- -------- --------
<S> <C> <C> <C> <C> <C> <C>
(In millions)
Product..................................................... $116.5 $ 98.4 18% $218.9 $188.6 16%
Services.................................................... 39.6 26.5 49% 73.4 49.6 48%
Maintenance................................................. 54.4 52.1 4% 105.7 102.3 3%
-------- -------- -------- --------
Total revenue............................................. $210.5 $177.0 19% $398.0 $340.5 17%
-------- -------- -------- --------
-------- -------- -------- --------
</TABLE>
SOURCES OF REVENUE AS A PERCENT OF TOTAL REVENUE
<TABLE>
<S> <C> <C> <C> <C> <C> <C>
Product..................................................... 55% 56% 55% 55%
Services.................................................... 19% 15% 18% 15%
Maintenance................................................. 26% 29% 27% 30%
</TABLE>
The product revenue recorded during the three and six month periods ended
June 29, 1996, included product revenue of $10.1 million and $19.3 million,
respectively, from IMS. The three and six month periods ended June 28, 1997, do
not include product revenue from IMS since IMS' results are not consolidated in
the Company's 1997 results. CCT's product revenue for the three and six month
periods ending June 29, 1996 and for the quarter ended March 29, 1997 totaled
$5.7 million, $11.2 million, and $7.8 million, respectively. The Company's
product revenue for these periods did not include product revenue for CCT, which
was acquired by the Company on May 7, 1997. The second quarter of 1997 included
$8.5 million of product revenue from CCT. If IMS' sales had been excluded from
the 1996 results and if CCT's product revenue had been included in the 1996
results and for the three months ended March 29, 1997, product revenue would
have shown increases of $22.5 million or 24% and $38.4 million or 21% for the
three and six month periods ended June 28, 1997, respectively, compared to the
same periods of 1996. The increases were primarily driven by increased demand
for products used by customers to develop custom integrated circuits (ICs) and
deep submicron designs including design entry tools, automatic place-and-route
tools, physical verification tools and systems level tools.
Services revenue increased 49% and 48% in the three and six month periods
ended June 28, 1997, respectively, when compared to the same periods of 1996.
The increase in services revenue was the result of increased demand for the
Company's services offerings in the United States, Europe, and Japan.
The increase in maintenance revenue for the three and six month periods
ended June 28, 1997 as compared to the same periods of 1996, was primarily
attributable to an increase in the Company's installed base of products.
Revenue from international sources was approximately $101.9 million and
$91.1 million or 48% and 51% of total revenue for the three months ended June
28, 1997 and June 29, 1996, respectively. For the six month period ended June
28, 1997, revenue from international sources was $197.7 million, as compared to
$166.0 million for the six month period ended June 29, 1996, representing 49% of
total revenue for both
9
<PAGE>
periods. The increase in total revenue from international sources in the second
quarter of 1997, as compared to the second quarter of 1996, was primarily
attributable to strong revenue growth in Japan despite a $6.1 million negative
impact on revenue as the result of the weakening of certain foreign currencies,
primarily the Japanese yen, in relation to the U.S. dollar.
COST OF REVENUE
<TABLE>
<CAPTION>
THREE MONTHS ENDED
SIX MONTHS ENDED
------------------- -------------------
JUNE 28, JUNE 29, JUNE 28, JUNE 29,
1997 1996 % CHANGE 1997 1996 % CHANGE
-------- -------- -------- -------- -------- --------
<S> <C> <C> <C> <C> <C> <C>
(In millions)
Product..................................................... $ 10.1 $ 12.9 (22%) $ 19.0 $ 23.8 (20%)
Services.................................................... $ 27.9 $ 18.6 50% $ 52.1 $ 36.2 44%
Maintenance................................................. $ 5.6 $ 6.3 (11%) $ 11.4 $ 11.4 0%
</TABLE>
COST OF REVENUE AS A PERCENT OF RELATED REVENUE
<TABLE>
<S> <C> <C> <C> <C> <C> <C>
Product..................................................... 9% 13% 9% 13%
Services.................................................... 70% 70% 71% 73%
Maintenance................................................. 10% 12% 11% 11%
</TABLE>
Cost of product revenue includes costs of production personnel, packaging
and documentation, amortization of capitalized software development costs and,
in the three month and six month periods ended June 29, 1996, costs related to
IMS' automated test equipment (ATE) hardware business. If IMS costs had been
excluded from the costs incurred in the second quarter of 1996, cost of product
during the second quarter of 1997 would have increased $0.8 million or 9% when
compared to the comparable 1996 period. This increase is due primarily to
increased revenue. If IMS' costs had been excluded from the costs incurred
during the first six months of 1996, cost of product during the 1997 comparable
period would have increased $2.0 million or 11% primarily due to increased
revenue and an increase in royalty expenses. Additionally, cost of product as a
percent of product revenue for the three month and six month periods ended June
29, 1996, would have been 11% and 10%, respectively.
Cost of services revenue includes personnel and related costs associated
with providing services to customers and the infrastructure to manage a services
organization, as well as costs to recruit, develop and retain services
professionals. Cost of services revenue increased in total dollars due to costs
associated with increased services revenue and the investment in additional
services professionals to further develop this line of business. Until these
design and services resources are fully utilized through additional revenue
contracts or until further operating efficiencies are obtained, as to which
there can be no assurance, services gross margins could be adversely affected.
Additionally, the cost of integrating new services professionals performing a
growing number of services offerings may decrease services gross margins until
operating efficiencies are obtained.
Cost of maintenance revenue includes the cost of customer services such as
hot-line and on-site support and the production cost of the maintenance renewal
process. Cost of maintenance revenue decreased in total dollars and as a
percentage of maintenance revenue for the quarter ended June 28, 1997, compared
to the prior year quarter, due to the deconsolidation of IMS. Cost of
maintenance remained relatively flat, in both absolute dollars and as a
percentage of revenue, for the six month period ended June 28, 1997 compared to
the six month period ended June 29, 1996.
10
<PAGE>
OPERATING EXPENSES
<TABLE>
<CAPTION>
THREE MONTHS ENDED
SIX MONTHS ENDED
------------------- -------------------
JUNE 28, JUNE 29, JUNE 28, JUNE 29,
1997 1996 % CHANGE 1997 1996 % CHANGE
-------- -------- -------- -------- -------- --------
<S> <C> <C> <C> <C> <C> <C>
(In millions)
Marketing and sales......................................... $ 59.7 $ 53.0 13% $114.9 $105.2 9%
Research and development.................................... $ 33.8 $ 29.2 16% $ 65.1 $ 55.2 18%
General and administrative.................................. $ 13.6 $ 13.6 0% $ 25.8 $ 26.7 (3%)
Unusual items............................................... $ 22.4 $-- $ 34.1 $--
</TABLE>
EXPENSES AS A PERCENT OF TOTAL REVENUE
<TABLE>
<S> <C> <C> <C> <C> <C> <C>
Marketing and sales......................................... 28% 30% 29% 31%
Research and development.................................... 16% 17% 16% 16%
General and administrative.................................. 6% 8% 6% 8%
Unusual items............................................... 11% -- 9% --
</TABLE>
The three and six month periods ended June 28, 1997, do not include expenses
from IMS, but do include expenses from CCT for the period from May 7, 1997
through June 28, 1997.
The increase in marketing and sales expenses for the quarter ended June 28,
1997, as compared to the quarter ended June 29, 1996, was primarily due to an
increase in employee related costs of $3.3 million, an increase in business trip
expenses of $1.8 million, an increase in consulting and other services of $1.1
million and increased management information systems costs of $1.1 million.
Included in the above amounts are expenses attributable to CCT of approximately
$1.7 million. These increases were offset by a decrease of $2.9 million related
to the deconsolidation of IMS. The increase in marketing and sales expenses for
the six month period ended June 28, 1997, as compared to the six month period
ended June 29, 1996, was primarily due to an increase in employee related costs
of $6.5 million, increased management information systems costs of $2.5 million,
an increase in business trip expenses of $2.2 million and increased advertising
expenses of $1.3 million. These increases were partially offset by a decrease of
$4.6 million related to the deconsolidation of IMS. Weakening of certain foreign
currencies in relation to the U.S. dollar favorably impacted marketing and sales
expenses by approximately $1.1 million and $2.1 million for the three and six
month periods ended June 28, 1997, respectively, as compared to the prior year
periods.
The Company's investment in research and development, prior to the reduction
for capitalization of software development costs, was $37.3 million and $32.9
million for the quarters ended June 28, 1997 and June 29, 1996, respectively,
representing 18% and 19% of total revenue. Capitalization of software
development costs for the quarters ended June 28, 1997 and June 29, 1996 was
$3.5 million and $3.7 million, respectively, which represented 9% and 11%,
respectively, of total research and development expenditures made in those
periods. For the six months ended June 28, 1997, gross research and development
expenses were $71.9 million compared to $62.1 million for the same period in
1996, after capitalization of $6.8 million and $6.9 million, respectively, which
represented 9% and 11%, respectively, of total research and development
expenditures made in those periods, respectively. In any given period, the
amount of capitalized software development costs may vary depending on the exact
nature of the development performed. The expense increase for the quarter ended
June 28, 1997 as compared to the quarter ended June 29, 1996 was primarily
attributable to increases in employee related costs of $3.7 million, and an
increase in management information systems costs of $0.8 million offset by a
decrease of $1.3 million related to the deconsolidation of IMS. Included in the
above amounts are expenses attributable to CCT of approximately $1.9 million.
The expense increase for the six month period ended June 28, 1997 as compared to
the six month period ended June 29, 1996 was primarily attributable to an
increase in
11
<PAGE>
employee related expenses of $8.0 million and an increase in management
information systems costs of $1.3 million offset by a decrease of $2.6 million
related to the deconsolidation of IMS.
For the quarter ended June 28, 1997, general and administrative expenses
were essentially flat compared to the prior year quarter primarily due to
decreases of $1.0 million in legal expenses and $0.9 million related to the
deconsolidation of IMS offset by increases of $1.1 million in management
information system costs and $0.9 million in other employee expenses. For the
six month period ended June 28, 1997, as compared to the same period of the
prior year, general and administrative expenses decreased slightly, primarily as
a result of a decrease in legal costs of $3.1 million and a reduction of $1.3
million due to the deconsolidation of IMS, partially offset by increased
management information system costs of $2.9 million and employee related
expenses of $1.5 million.
UNUSUAL ITEMS
During the second quarter of 1997, the Company incurred approximately $16.0
million of expenses related to its merger with CCT. Additionally, the Company
recorded expenses totaling approximately $6.4 million to restructure its
international business operations. These costs consisted primarily of legal and
professional fees of $7.1 million, $6.2 million of severance related expenses
for approximately 120 employees, investment banking fees of $3.7 million,
facility costs of $3.3 million, $1.8 million of capitalized software development
costs for products developed by the Company which were replaced by CCT products
and other intangibles, and other miscellaneous costs.
In February 1997, the Company acquired all of the outstanding stock of
Synthesia AB (Synthesia) for 57,583 shares of the Company's common stock and
cash. The total purchase price was $4.7 million, and the acquisition was
accounted for as a purchase. In connection with the acquisition, net intangibles
of $5.6 million were acquired, of which $4.9 million was reflected as a one-time
charge to operations for the write-off of in-process research and development
that had not reached technological feasibility and, in managements opinion, had
no probable alternative future use.
The Company incurred $4.8 million of restructuring costs during the first
quarter of 1997, primarily as a result of its merger with High Level Design
Systems, Inc. (HLDS) which occurred during the fourth quarter of 1996, and the
Company's reorganization into business units. Costs included a provision for the
reduction of its work force, including severance for approximately 114
employees. The majority of the costs were utilized during the first quarter of
1997. Additional disbursements were made during the second quarter of 1997; the
remainder, except for facility related costs which will be paid out over the
next three years, are expected to be disbursed by the end of 1997.
OTHER INCOME (EXPENSE) AND INCOME TAXES
Other income (expense) increased $4.0 million in the quarter ended June 28,
1997, compared to the quarter ended June 29, 1996, primarily due to an increase
in interest income related to higher cash balances in the second quarter of 1997
than in 1996. The increase of $19.2 million in the six months ended June 28,
1997 compared to the six months ended June 29, 1996 was primarily due to a $13.1
million gain on the sale of IMS stock recorded by the Company in the quarter
ended March 29, 1997 and an increase in interest income of $7.0 million.
The Company's estimated annual effective tax rate is 30% for 1997 and was
33% for 1996. The decrease in the expected rate is due to the difference in tax
rates between domestic and foreign operations.
LIQUIDITY AND CAPITAL RESOURCES
At June 28, 1997, the Company's principal sources of liquidity consisted of
$361.3 million of cash and short-term investments, compared to $285.5 million at
December 28, 1996, and a three-year, $120 million
12
<PAGE>
LIQUIDITY AND CAPITAL RESOURCES (CONTINUED)
secured revolving line of credit agreement. As of August 8, 1997, the Company
had no borrowings under the revolving line of credit.
Cash generated from operating activities increased $22.3 million for the six
months ended June 28, 1997, as compared to the six months ended June 29, 1996.
The increase was due primarily to increases in net income, accounts receivable,
accrued liabilities and payables, and income taxes payable, partially offset by
a decrease in deferred revenue.
At June 28, 1997, the Company had working capital of $307.3 million compared
with $259.6 million at December 28, 1996. Changes in working capital were
primarily driven by an increase in cash and short-term investments of $75.8
million, decreases in accounts receivable and inventory of $20.1 million and
$8.1 million, respectively, an increase in prepaid expenses and other of $9.7
million, and an increase in accounts payable and accrued liabilities of $11.0
million. The increase in cash was primarily due to the improved collection of
accounts receivable which resulted in a decrease in days' sales outstanding at
June 28, 1997.
In addition to its short-term investments, the Company's primary investing
activities were purchases of property and equipment, purchases of software and
intangibles, and the capitalization of software development costs which,
combined, represented $70.1 million and $45.9 million of cash used for investing
activities in the six months ended June 28, 1997 and June 29, 1996,
respectively. Additionally, cash increased $42.4 million due to the CCT merger
and $18.6 million from net proceeds related to the sale of IMS stock, and was
partially offset by the loss to the Company of IMS' cash of $9.5 million due to
deconsolidation, for the six months ended June 28, 1997.
On May 7, 1997 Cadence announced that its board of directors had rescinded
the company's previously announced stock repurchase program, with the exception
of continued systematic stock repurchases under its seasoned stock repurchase
program for the Company's employee stock purchase plan (ESPP). The Company
rescinded the stock repurchase program in connection with its merger with CCT in
order to comply with requirements for the pooling of interests accounting
treatment. The repurchase authorization for the ESPP program is for 600,000
shares of Cadence common stock over a six-month period through September 1997.
Anticipated cash requirements for the remainder of 1997 include the purchase
of treasury stock through the exercise of call options for the Company's
seasoned systematic stock repurchase program and the contemplated additions of
property, plant and equipment of approximately $28.0 million.
As part of its overall investment strategy, the Company has committed to
participating in a venture capital partnership as a limited partner. The
Company's total committed investment of at least $35.0 million will be made over
the next three to four years. As of June 28, 1997, the Company's net investment
in the partnership totaled $8.7 million, which is reflected in other assets in
the accompanying balance sheet.
The Company anticipates that current cash and short-term investment
balances, cash flows from operations, and the $120 million revolving line of
credit will be sufficient to meet its working capital and capital expenditure
requirements on a short and long-term basis.
FACTORS THAT MAY AFFECT FUTURE RESULTS
Because of rapid technological changes in the EDA industry, the Company's
future revenues will depend on its ability to develop or acquire new products
and enhance its existing products on a timely basis to keep pace with
innovations in technology and to support a range of changing computer software
and hardware platforms and customer preferences. Changes in manufacturing
technology may render the
13
<PAGE>
FACTORS THAT MAY AFFECT FUTURE RESULTS (CONTINUED)
Company's software tools obsolete. Lack of market acceptance or significant
delays in product development could result in a loss of competitiveness of the
Company's products, with a resulting loss of revenues.
The Company has been involved in a number of significant merger and
acquisition transactions. These transactions have been motivated by many factors
including the desire to obtain new technologies, the desire to expand and
enhance the Company's product lines and the desire to attract key personnel.
Growth through acquisition has several identifiable risks including risks
related to integration of the previously distinct businesses into a single unit,
the substantial management time devoted to such activities, undisclosed
liabilities, the failure to realize anticipated benefits (such as cost savings
and synergies), and issues related to product transition (such as distribution,
engineering, and customer support).
The Company's operating expenses are partially based on its expectations
regarding future revenue. The Company's results of operations may be adversely
affected if revenue does not materialize in a quarter as anticipated. Since
expenses are usually committed in advance of revenues and because only a small
portion of expenses vary with revenue, the Company's operating results may be
impacted significantly by lower revenue which would be attributable to various
factors and could affect quarter to quarter comparisons.
Additionally, a substantial portion of the Company's revenues from services
are earned pursuant to fixed price contracts. Variances in costs associated with
those contracts could have a material adverse effect on the Company's business,
financial condition and results of operations.
The Company expects that international revenues will continue to account for
a significant portion of its total revenues. The Company's international
operations involve a number of risks normally associated with such operations
including, among others, adoption and expansion of government trade
restrictions, volatile foreign exchange rates, currency conversion risks,
limitations on repatriation of earnings, reduced protection of intellectual
property rights, the impact of possible recessionary environments in economies
outside the U.S., longer receivables collection periods and greater difficulty
in accounts receivable collection, difficulties in managing foreign operations,
political and economic instability, unexpected changes in regulatory
requirements and tariffs and other trade barriers. Currency exchange
fluctuations in countries in which the Company conducts business could also
materially adversely affect the Company's business, financial condition and
results of operations. The Company enters into foreign currency forward
contracts to hedge the short-term impact of foreign currency fluctuations.
Although the Company attempts to reduce the impact of foreign currency
fluctuations, significant exchange rate movements may have a material adverse
impact on the Companys results of operations.
Effective July 1, 1997, the Company reorganized the operation of its
business in Japan, acquiring an equity position in and entering into a long-term
exclusive distribution arrangement for distribution of software tools with
Innotech Corporation. The Company will continue to market and provide design
services in Japan through a wholly-owned subsidiary. Future results may be
adversely affected if the Company fails to realize the benefits contemplated by
the reorganization of its Japanese business operations.
Due to the foregoing, as well as other factors, past financial performance
should not be considered an indicator of future performance. In addition, the
Company's participation in a highly dynamic industry often results in
significant volatility of the Company's common stock price. Any change in
revenues or operating results below levels expected by securities analysts for
the Company or its competitors, and the timing of the announcement of such
shortfalls, could have an immediate and significant adverse effect on the
trading price of the Company's common stock in any given period.
14
<PAGE>
PART II. OTHER INFORMATION
ITEM 1. LEGAL PROCEEDINGS
From time to time the Company is involved in various disputes and litigation
matters which have arisen in the ordinary course of business. These include
disputes and lawsuits related to intellectual property, contract law and
employee relations matters.
The Company filed a complaint in the United States District Court for the
Northern District of California on December 6, 1995 against Avant! Corporation
(a company formed by a merger of companies formerly known as ArcSys, Inc. and
ISS, Inc. (Avant!)) and certain of its employees for misappropriation of trade
secrets, copyright infringement, conspiracy and other illegalities.
On January 16, 1996, Avant! filed various counterclaims against the Company
and the Company's President and CEO and, on April 12, 1996, Avant! filed a First
Amended Counterclaim. The amended counterclaim alleges, INTER ALIA, that the
Company and its President and CEO had cooperated with the Santa Clara County
District Attorney and initiated and pursued its complaint against Avant! for
anticompetitive reasons, engaged in wrongful activity in an attempt to
manipulate Avant!'s stock price and utilized certain pricing policies and other
acts to unfairly compete against Avant! in the marketplace. The amended
counterclaim also alleges that certain Company insiders engaged in illegal
insider trading with respect to Avant!'s stock. The Company and its President
and CEO believe that each has meritorious defenses to Avant!'s claims, and each
intends to defend such action vigorously. By an order dated July 13, 1996, the
court bifurcated Avant!'s counterclaim from the Company's complaint.
On April 19, 1996, the Company filed a motion seeking a preliminary
injunction to prevent further use of Cadence copyrighted code and trade secrets
by Avant!. On March 18, 1997, the Court issued an order in which it granted in
part and denied in part that motion. The Company has filed an appeal as to
certain aspects of the Court's order. The Court has not yet set a trial date. By
an order dated July 22, 1997, the Court stayed most activity in the case pending
in Federal District Court and ordered Avant! to post a $5 million bond, in light
of criminal proceedings pending against Avant! and several of its executives.
The Company intends to pursue its claim vigorously.
Management believes that the ultimate resolution of the disputes and
litigation matters discussed above will not have a material adverse impact on
the Company's financial position or results of operations.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
At the Annual Meeting of Stockholders held May 1, 1997, the stockholders of
the Company approved the following matters:
1. A proposal to elect seven (7) directors of the Company to serve for the
ensuing year and until their successors are elected or until such director's
earlier resignation or removal.
<TABLE>
<CAPTION>
NOMINEE IN FAVOR WITHHELD
- ------------------------------------------------------------------ ------------ ------------
<S> <C> <C>
Carol A Bartz..................................................... 77,149,426 248,088
Joseph B. Costello................................................ 77,151,342 246,172
Leonard Y.W. Liu.................................................. 77,149,121 248,393
Donald L. Lucas................................................... 77,150,125 247,389
Alberto Sangiovanni-Vincentelli................................... 77,151,557 245,957
George M. Scalise................................................. 77,148,164 249,350
John B. Shoven.................................................... 77,150,831 246,683
</TABLE>
15
<PAGE>
PART II. OTHER INFORMATION (CONTINUED)
2. A proposal for the approval of an amendment to the Certificate of
Incorporation, as amended, to increase the authorized shares of Common Stock
of the Company from 150,000,000 to 300,000,000 was approved by a vote of
70,276,977 for, 6,997,672 opposed and 122,865 withheld.
3. A proposal for the approval of the adoption of the Company's 1990 Employee
Stock Purchase Plan, as amended, was approved 63,233,982 for, 2,106,178
opposed, 160,007 withheld and 11,897,347 broker non-vote.
4. A proposal for the approval of the adoption of the Company's 1987 Incentive
Stock Option Plan, as amended, was approved 37,150,172 for, 28,124,750
opposed, 225,245 withheld, and 11,897,347 broker non-vote.
5. A proposal for the ratification of the selection of Arthur Andersen LLP as
independent public accountants for the fiscal year ending January 3, 1998
was approved by a vote of 77,253,341 for, 55,013 opposed and 89,160
withheld.
ITEM 6. EXHIBITS AND REPORTS ON FORM 8-K
(a) The following exhibits are filed herewith:
<TABLE>
<CAPTION>
EXHIBIT
NUMBER EXHIBIT TITLE LOCATION
- ----------- -------------------------------------------------------------------------- -----------
<C> <S> <C>
10.48 Distribution Agreement Among Cadence Design Systems (Ireland) Ltd.,
Cadence Design Systems K.K. and Cadence Design Systems (Japan) B.V. dated
as of April 28, 1997.
27.1 Financial data schedule for the period ended June 28, 1997.
</TABLE>
(b) Reports on Form 8-K
On May 20, 1997, the Registrant filed a Current Reporton Form 8-K reporting
the Company's completion of the merger with Cooper & Chyan Technology, Inc.
16
<PAGE>
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the
registrant has duly caused this report to be signed on its behalf by the
undersigned thereunto duly authorized.
<TABLE>
<S> <C> <C>
CADENCE DESIGN SYSTEMS, INC.
(Registrant)
DATE: August 8, 1997 By: /s/ JOSEPH B. COSTELLO
-----------------------------------------
Joseph B. Costello
PRESIDENT AND CHIEF EXECUTIVE OFFICER
DATE: August 8, 1997 By: /s/ H. RAYMOND BINGHAM
-----------------------------------------
H. Raymond Bingham
EXECUTIVE VICE PRESIDENT AND
CHIEF FINANCIAL OFFICER
</TABLE>
17
<PAGE>
Exhibit 10.48
DISTRIBUTION AGREEMENT
AMONG
CADENCE DESIGN SYSTEMS (IRELAND) LTD.
AND
CADENCE DESIGN SYSTEMS K.K.
AND
CADENCE DESIGN SYSTEMS (JAPAN) B.V.
<PAGE>
TABLE OF CONTENTS
PAGE
DEFINITIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Affiliate. . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Assimilation Services. . . . . . . . . . . . . . . . . . . . . 2
CKK Services . . . . . . . . . . . . . . . . . . . . . . . . . 2
Confidential Information . . . . . . . . . . . . . . . . . . . 2
Distributor. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Documentation. . . . . . . . . . . . . . . . . . . . . . . . . 2
End User . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
End User Agreement . . . . . . . . . . . . . . . . . . . . . . 3
Intellectual Property Rights . . . . . . . . . . . . . . . . . 3
Maintenance Agreement. . . . . . . . . . . . . . . . . . . . . 3
Maintenance Services . . . . . . . . . . . . . . . . . . . . . 3
Net Revenue. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Outsourcing. . . . . . . . . . . . . . . . . . . . . . . . . . 3
Person . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Products . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Quarter. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Representative . . . . . . . . . . . . . . . . . . . . . . . . 4
Sale or Resale . . . . . . . . . . . . . . . . . . . . . . . . 4
Software . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Storage Media. . . . . . . . . . . . . . . . . . . . . . . . . 4
Taxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Technical Assistance . . . . . . . . . . . . . . . . . . . . . 4
Territory. . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
APPOINTMENT OF CKK AS DISTRIBUTOR. . . . . . . . . . . . . . . . . 5
Appointment. . . . . . . . . . . . . . . . . . . . . . . . . . 5
Third Party Rights.. . . . . . . . . . . . . . . . . . . . . . 5
Rights Reserved. . . . . . . . . . . . . . . . . . . . . . . . 5
i.
<PAGE>
TABLE OF CONTENTS
(CONTINUED)
PAGE
No Right to Source Code. . . . . . . . . . . . . . . . . . . . 6
Non-Compete. . . . . . . . . . . . . . . . . . . . . . . . . . 6
MARKETING OBLIGATIONS OF CKK.. . . . . . . . . . . . . . . . . . . 7
Marketing Activities.. . . . . . . . . . . . . . . . . . . . . 7
Offices and Facilities.. . . . . . . . . . . . . . . . . . . . 8
Staffing and Training. . . . . . . . . . . . . . . . . . . . . 8
Activities . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Advertising. . . . . . . . . . . . . . . . . . . . . . . . . . 8
End User Agreements. . . . . . . . . . . . . . . . . . . . . . 8
Termination of End User Agreements.. . . . . . . . . . . . . . 9
SUPPORT SERVICES.. . . . . . . . . . . . . . . . . . . . . . . . . 9
CKK Training.. . . . . . . . . . . . . . . . . . . . . . . . . 9
Maintenance Services . . . . . . . . . . . . . . . . . . . . . 9
Error Corrections. . . . . . . . . . . . . . . . . . . . . . . 10
Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
COVENANTS OF CKK.. . . . . . . . . . . . . . . . . . . . . . . . . 10
No Unauthorized Use. . . . . . . . . . . . . . . . . . . . . . 10
No Unauthorized Representations or Warranties. . . . . . . . . 10
General Obligations. . . . . . . . . . . . . . . . . . . . . . 10
No Reproduction. . . . . . . . . . . . . . . . . . . . . . . . 11
Advice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Error List.. . . . . . . . . . . . . . . . . . . . . . . . . . 11
Additional Information.. . . . . . . . . . . . . . . . . . . . 11
OBLIGATIONS OF CADENCE.. . . . . . . . . . . . . . . . . . . . . . 11
Marketing Materials. . . . . . . . . . . . . . . . . . . . . . 11
Provision of Updates.. . . . . . . . . . . . . . . . . . . . . 11
Product Modifications. . . . . . . . . . . . . . . . . . . . . 12
No Other Obligations.. . . . . . . . . . . . . . . . . . . . . 12
REVIEW OF CKK. . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Operations Committee.. . . . . . . . . . . . . . . . . . . . . 12
ii.
<PAGE>
TABLE OF CONTENTS
(CONTINUED)
PAGE
Distribution Targets.. . . . . . . . . . . . . . . . . . . . . 12
Records and Reports. . . . . . . . . . . . . . . . . . . . . . 12
End User Satisfaction. . . . . . . . . . . . . . . . . . . . . 13
CKK Management.. . . . . . . . . . . . . . . . . . . . . . . . 13
ORDERS AND DELIVERY. . . . . . . . . . . . . . . . . . . . . . . . 13
Orders.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Shipping; Acceptance; Risk of Loss.. . . . . . . . . . . . . . 13
DOA Product. . . . . . . . . . . . . . . . . . . . . . . . . . 13
Defective Products Under Warranty. . . . . . . . . . . . . . . 14
Cancellation of Orders . . . . . . . . . . . . . . . . . . . . 14
Use of Cadence Sales Support Systems . . . . . . . . . . . . . 14
PAYMENT TERMS AND CONDITIONS . . . . . . . . . . . . . . . . . . . 14
[*] MARKETING RIGHTS . . . . . . . . . . . . . . . . . . . . . 14
Retail Prices. . . . . . . . . . . . . . . . . . . . . . . . . 14
Cost of Products . . . . . . . . . . . . . . . . . . . . . . . 14
[*] CKK. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
[*] [*]. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
[*]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
[*]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Payment to [*] for [*] . . . . . . . . . . . . . . . . . . . . 15
Payment for [*]. . . . . . . . . . . . . . . . . . . . . . . . 15
Billing and Payment. . . . . . . . . . . . . . . . . . . . . . 15
Taxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
OWNERSHIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Intellectual Property Rights.. . . . . . . . . . . . . . . . . 15
Literature . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Notice of Claims . . . . . . . . . . . . . . . . . . . . . . . 15
TRADEMARKS AND TRADE NAMES.. . . . . . . . . . . . . . . . . . . . 16
Authorization to Use.. . . . . . . . . . . . . . . . . . . . . 16
Ownership of Trademarks. . . . . . . . . . . . . . . . . . . . 16
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
iii.
<PAGE>
TABLE OF CONTENTS
(CONTINUED)
PAGE
Approvals. . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Infringing Products. . . . . . . . . . . . . . . . . . . . . . 17
NONDISCLOSURE OF CONFIDENTIAL INFORMATION. . . . . . . . . . . . . 17
Access and Use of Confidential Information.. . . . . . . . . . 17
Agreement Not to Disclose Confidential Information.. . . . . . 17
Ownership and Return of Confidential Information.. . . . . . . 17
Injunctive Relief. . . . . . . . . . . . . . . . . . . . . . . 18
Exceptions.. . . . . . . . . . . . . . . . . . . . . . . . . . 18
PRODUCTS PROVIDED AS-IS. . . . . . . . . . . . . . . . . . . . . . 18
End User Warranty. . . . . . . . . . . . . . . . . . . . . . . 18
NO WARRANTIES. . . . . . . . . . . . . . . . . . . . . . . . . . . 18
LIMITATION ON DAMAGES. . . . . . . . . . . . . . . . . . . . . . . 19
INDEMNIFICATION. . . . . . . . . . . . . . . . . . . . . . . . . . 19
CKK Indemnification of Cadence and its Affiliates. . . . . . . 19
Cadence Indemnification of CKK.. . . . . . . . . . . . . . . . 19
Remedies for Infringement. . . . . . . . . . . . . . . . . . . 20
COMPLIANCE WITH APPLICABLE LAWS. . . . . . . . . . . . . . . . . . 21
Export Control.. . . . . . . . . . . . . . . . . . . . . . . . 21
Authorization. . . . . . . . . . . . . . . . . . . . . . . . . 21
Other Laws.. . . . . . . . . . . . . . . . . . . . . . . . . . 21
ASSIGNMENT.. . . . . . . . . . . . . . . . . . . . . . . . . . 21
Limits on Assignment by CKK. . . . . . . . . . . . . . . . . . 21
Assignment by Cadence. . . . . . . . . . . . . . . . . . . . . 21
Successors and Assigns.. . . . . . . . . . . . . . . . . . . . 22
DISPUTE RESOLUTION.. . . . . . . . . . . . . . . . . . . . . . . . 22
ARBITRATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Arbitration. . . . . . . . . . . . . . . . . . . . . . . . . . 22
Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Provisional Relief.. . . . . . . . . . . . . . . . . . . . . . 23
Binding Nature of Award. . . . . . . . . . . . . . . . . . . . 23
iv.
<PAGE>
TABLE OF CONTENTS
(CONTINUED)
PAGE
TERM AND TERMINATION.. . . . . . . . . . . . . . . . . . . . . . . 23
Term . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Immediate Termination. . . . . . . . . . . . . . . . . . . . . 23
Termination for Material Breach. . . . . . . . . . . . . . . . 24
EFFECT OF TERMINATION. . . . . . . . . . . . . . . . . . . . . . . 24
Orderly Termination. . . . . . . . . . . . . . . . . . . . . . 24
Assignment of End User Agreements. . . . . . . . . . . . . . . 24
Return of Materials. . . . . . . . . . . . . . . . . . . . . . 25
PERFORMANCE ISSUES.. . . . . . . . . . . . . . . . . . . . . . . . 25
Background.. . . . . . . . . . . . . . . . . . . . . . . . . . 25
Target Issues. . . . . . . . . . . . . . . . . . . . . . . . . 25
Target Issues. . . . . . . . . . . . . . . . . . . . . . . . . 25
Product Issues.. . . . . . . . . . . . . . . . . . . . . . . . 25
GENERAL PROVISIONS.. . . . . . . . . . . . . . . . . . . . . . . . 25
Independent Contractors. . . . . . . . . . . . . . . . . . . . 25
Waiver.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Force Majeure. . . . . . . . . . . . . . . . . . . . . . . . . 26
Survival.. . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Expenses.. . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Section Headings.. . . . . . . . . . . . . . . . . . . . . . . 26
Parties Represented by Counsel.. . . . . . . . . . . . . . . . 26
Amendment. . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Remedies Cumulative. . . . . . . . . . . . . . . . . . . . . . 27
Further Assurances.. . . . . . . . . . . . . . . . . . . . . . 27
Number and Gender. . . . . . . . . . . . . . . . . . . . . . . 27
Counterparts.. . . . . . . . . . . . . . . . . . . . . . . . . 27
Computation of Time. . . . . . . . . . . . . . . . . . . . . . 27
Severability.. . . . . . . . . . . . . . . . . . . . . . . . . 27
Governing Law. . . . . . . . . . . . . . . . . . . . . . . . . 27
v.
<PAGE>
TABLE OF CONTENTS
(CONTINUED)
PAGE
Entire Agreement.. . . . . . . . . . . . . . . . . . . . . . . 27
vi.
<PAGE>
DISTRIBUTION AGREEMENT
FOR
CADENCE DESIGN SYSTEMS (IRELAND), LTD. SOFTWARE
THIS DISTRIBUTION AGREEMENT (this "Agreement") is made and entered into as of
April 28, 1997 (the "Execution Date"), by and between CADENCE DESIGN SYSTEMS
(IRELAND), LTD., a corporation organized and existing under the laws of the
Republic of Ireland ("Cadence"), with its principal place of business at Europa
House, Suite 10, Harcourt Street, Dublin 2, Ireland, and CADENCE DESIGN SYSTEMS
(JAPAN) B.V., a corporation organized and existing under the laws of the
Netherlands, with a branch office in Japan ("SKK"), and CADENCE DESIGN SYSTEMS
K.K., a corporation organized and existing under the laws of Japan (Kabushiki
Kaisha) with its principal place of business at Shin-Yokohama Square Bldg.
2-3-12, Shin-Yokohama, Kohoku ku, Yokohama 222, JAPAN ("CKK"). The Effective
Date of this Agreement is July 1, 1997 (the "Effective Date") or an earlier date
as mutually agreed by the parties.
W I T N E S S E T H:
Whereas, Cadence Design Systems, Inc. ("Cadence US") is a developer and
producer of high-performance computer software tools that integrate
computer-aided engineering, computer-aided design and computer-aided testing
into the Products (as defined below) and is the exclusive owner of all
copyrights, patents, trade secrets, know how and other proprietary rights
therein; and
Whereas, pursuant to a separate agreement, as of the Effective Date Cadence
will hold the exclusive distribution rights to the Products, with right to
sub-distribute, in the Territory (as defined below) and other territories; and
Whereas, CKK has the facilities, personnel and technical expertise to
market the Products in the Territory; and
Whereas, CKK wishes to obtain, and Cadence is willing to grant CKK, a
limited right to market the Products in the Territory, all on the terms set
forth in this Agreement.
Whereas, Cadence has authorized SKK, INTER ALIA, to provide certain design
and support services in Japan.
Now, therefore, in consideration of the foregoing facts and in reliance
upon the mutual promises, representations and covenants set forth below,
Cadence, SKK and CKK hereby agree as follows:
1. DEFINITIONS.
For purpose of this Agreement, the following terms shall have the meaning
and definition set forth below:
1.1 "AFFILIATE" means, with respect to a party, (i) an entity that
controls, is under common control with, or is controlled by such party; and (ii)
such party's officers and directors. For purposes of this definition, "control"
means the ownership of more than fifty percent (50%)
1.
<PAGE>
of the outstanding voting securities of an entity, and the terms "controlling"
and "controlled" have meanings correlative to the foregoing.
1.2 "ASSIMILATION SERVICES" means that set of services performed by CKK on
behalf of End Users and potential End Users in order to assist any such End User
or potential End User by
(a) installing and verifying the correct functionality for the
relevant Products and licensing software. In addition, the service includes
setting up each End User's environment to access the Products provided to such
End User. Features of this service may include loading software from the CD-ROM
and/or cartridge tape; configuring, starting up, and verifying the appropriate
licensing scheme; configuring the End User's environment to use the software;
verifying correct installation with acceptance tests; basic system and licensing
management training; and demonstrating on-line documentation.
(b) performing "QuickStart Services," i.e., services structured to
maximize the EndUser's productivity by ensuring a quick ramp up to an optimum
usage level. Steps performed to achieve this level include application setup,
creation of relevant technology and control files, and knowledge transfer to
provide applications expertise for the project's specific needs and use.
1.3 "CKK SERVICES" shall mean the CKK Training as defined in Section 4.1
("CKK Training") and the Assimilation Services as defined in Section 1.2
("Assimilation Services").
1.4 "CONFIDENTIAL INFORMATION" shall mean all data and information of a
confidential nature, including know-how and trade secrets, relating to the
business, the affairs, the Products, the development projects or other products
or services of a party. Confidential Information may be communicated orally, in
writing or in any other recorded or tangible form. Data and information shall
be considered to be Confidential Information: (1) if a party has marked them as
such, (2) if a party, orally or in writing, has advised the other party of their
confidential nature, or (3) if, due to their character or nature, a reasonable
Person in a like position and under like circumstances as the other party would
treat them as secret and confidential.
1.5 "DISTRIBUTOR" means a distributor appointed by CKK, and approved by
Cadence in writing, to distribute the Products to End Users for use in the
Territory.
1.6 "DOCUMENTATION" shall mean the manuals, user guides and other end user
material providing information about the Software, including all modifications,
updates, derivations thereof and changes thereto, whether in written, graphical,
human readable or machine readable form.
1.7 "END USER" means a Person located in the Territory who obtains
Products subject to an End User Agreement for such End User's own business
purposes in the Territory, and not for resale, license or distribution to third
parties.
1.8 "END USER AGREEMENT" shall mean the written agreement, in a form
approved by Cadence, between CKK or a Distributor and an End User pursuant to
which such End User receives a limited, non-exclusive, non-transferable right to
use a Product in accordance
2.
<PAGE>
therewith. The current approved form of End User Agreement is attached hereto
as Exhibit A ("Approved End User Agreement"). All Products distributed
hereunder shall be distributed to End Users by CKK or its Distributors pursuant
to an End User Agreement.
1.9 "INTELLECTUAL PROPERTY RIGHTS" shall mean and include all intangible,
intellectual, proprietary and industrial property rights constituting, embodied
in, pertaining to, used in or with respect to the Products, and all intangible
embodiments and derivative works thereof wherever located, including but not
limited to the following: (i) all trademarks, trade names, service marks or
logos, including all registrations and applications therefor; (ii) all
copyrights, moral rights, and other rights in works of authorship including all
registrations and applications therefor; (iii) all mask works and other rights
pertaining to semiconductors, including cell libraries, microcode, tapes,
tape-outs and netlists rights, including all registrations and applications
therefor; (iv) all patents and patent applications, patentable ideas, inventions
and innovations; (v) all know-how and trade secrets; (vi) all design and code
documentation, methodologies, processes, design information, formulae,
engineering specifications, technical data, testing procedures, drawings and
techniques and other proprietary information and material of any kind; (vii) all
software programs in both source code and object code format, including testing,
software, and software tools; and (viii) all documentation, records, databases,
drafts, designs, codes, drawings and algorithms; and (ix) any and all
translations of any of the foregoing.
1.10 "MAINTENANCE AGREEMENT" shall mean an agreement for the provision of
Maintenance Services as described below.
1.11 "MAINTENANCE SERVICES" shall mean remedial and preventative services,
including the provision of Updates (as defined below) and support from the
Hotline (as described in Section 4.2(a)) ("Hotline Support"), to keep the most
current release of the Software provided to an End User under an End User
Agreement in good operating order.
1.12 "NET REVENUE" means the revenue, determined in accordance with
generally accepted accounting principles, received by Cadence from CKK for
the acquisition of Products by CKK for distribution to End Users, less
customary deductions as in effect at the time of calculation, consistently
applied, including without limitation (a) [*] (including without limitation
any [*]); (b) [*] and (c) [*].
1.13 "OUTSOURCING" means an arrangement between Cadence and a customer
under which Cadence undertakes the control and management of such customer's
personnel and potentially the control and management of such customer's
property, typically by employing such personnel and acquiring such property, and
thereafter performs one or more consulting engagements for such customer using,
among other resources, such personnel and property.
1.14 "PERSON" shall mean and include any individual, corporation, trust,
estate, partnership, joint venture, company, association, league, governmental
bureau or agency, or any other entity regardless of the type or nature thereof.
1.15 "PRODUCTS" shall mean and refer, individually and/or collectively, to
the combination or configuration of the Storage Media and the Software stored
thereon, and the Documentation and other materials offered by Cadence for use in
connection therewith.
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
3.
<PAGE>
1.16 "QUARTER" shall mean Cadence's fiscal quarter.
1.17 "REPRESENTATIVE" shall mean and include all managers, officers,
directors, consultants, contractors, assigns, successors, agents and employees
of a party to this Agreement.
1.18 "SALE" OR "RESALE" or any conjugation or variation thereof shall mean
with respect to Products, the sale only of the Storage Media (as defined in
Section 1.20 below), and the distribution of Software (as defined in Section
1.19 below) in connection therewith, which distribution shall not result in, be
deemed to result in, or otherwise be construed to result in a transfer of title
in such Software or any Intellectual Property Rights therein to CKK, its
Distributors, or any End Users.
1.19 "SOFTWARE" shall mean the computer software programs in object code
form listed in Exhibit B ("Products and Prices") hereto; provided that during
the term of this Agreement, Cadence will, with reasonable prior written notice
to CKK, amend Exhibit B ("Products and Prices") to include additional, or delete
existing, Software as Cadence makes such products generally commercially
available or removes them from commercial availability.
1.20 "STORAGE MEDIA" shall mean the diskettes, tapes, CD ROM or such other
carrier media as Cadence may consider appropriate, on which the Software is
stored and distributed.
1.21 "TAXES" shall mean all taxes associated with the marketing,
distribution and delivery of the Products ordered hereunder, including, but not
limited to, sales, use, excise, franchise, withholding, value-added, consumption
and similar taxes and all customs, duties or other governmental impositions, but
excluding taxes calculated on Cadence's net income.
1.22 "TECHNICAL ASSISTANCE" shall mean and include advice, training,
information and other support regarding the selection, installation,
maintenance, application and debugging of the Products.
1.23 "TERRITORY" shall mean the country of Japan.
1.24 "UPDATE" shall mean and include any alterations, changes,
enhancements, error corrections, modifications or other revisions to the
Software which alter or improve the types of function which are presently
provided by the Software, and which Cadence elects to provide to End User
customers which are receiving Maintenance Services.
2. APPOINTMENT OF CKK AS DISTRIBUTOR.
2.1 APPOINTMENT. Subject to the terms of this Agreement, including,
without limitation the reservation of rights granted to third parties set forth
in Section 2.2 ("Third Party Rights") and the additional rights reserved
pursuant to Section 2.3 ("Rights Reserved"), Cadence hereby appoints CKK as the
exclusive distributor of the Products to End Users and approved Distributors in
the Territory for use of such products solely in the Territory, and CKK hereby
accepts such appointment. In connection with such appointment, and subject to
the terms of this Agreement, Cadence hereby grants CKK a non-transferable
(except as set forth in Section 17 ("Assignment"), exclusive right (i) to
distribute and sell the Products that CKK obtains from Cadence hereunder solely
to End Users located in the Territory, provided that all such End Users are made
subject to an End User Agreement; and (ii) to use the Products, the Confidential
Information of Cadence and the Intellectual Property Rights solely in connection
with and to the
4.
<PAGE>
extent reasonably necessary to market the Products to End Users in the Territory
and to carry out its obligations hereunder. CKK understands and agrees that it
shall only be entitled to grant marketing or distribution rights to Distributors
approved by Cadence which enter into an agreement with CKK which imposes on such
Distributors substantially the same obligations imposed on CKK by this entire
agreement. CKK hereby appoints Innotech Corporation, a corporation organized
and existing under the laws of Japan ("Kabushiki Kaisha"), as a Distributor for
CKK under the terms of this Agreement, and Cadence hereby approves of and
consents to such appointment.
2.2 THIRD PARTY RIGHTS. Prior to the Execution Date, Cadence or its
Affiliates granted rights to certain third parties with respect to the
Intellectual Property Rights and/or certain of the Products ("Third Party
Rights"), which Third Party Rights conflict with the exclusive distribution
rights granted to CKK pursuant to Section 2.1. CKK understands and agrees that
the rights granted to CKK pursuant to Section 2.1 ("Appointment") are subject to
any and all Third Party Rights existing as of the Effective Date and listed in
Exhibit F ("Third Party Rights") to this agreement. Cadence agrees that as any
Third Party Right expires during the period in which this Agreement is
exclusive, it will not renew or otherwise extend such Third Party Right, subject
to any contractual or other legal restriction on Cadence's ability to do so.
2.3 RIGHTS RESERVED. All rights not specifically granted to CKK hereunder
are reserved to Cadence. Without limitation and notwithstanding any other
provision of this Agreement, Cadence shall have the right, without incurring any
liability or obligation to CKK, in the sole discretion of Cadence:
(a) To grant other Persons the right to incorporate the Products into
their product configurations and to market the Products as part of such product
configurations to End Users worldwide, including within the Territory, as
included with an OEM or VAR product; and
(b) To enter into agreements, directly or indirectly, with respect to
the distribution of the Products to multiple sites situated throughout the world
for the same global customers ("Global Deals"). In such event, CKK shall
receive the compensation set forth in Section 9.3 ("Cost of Products") for the
Products which are purchased by such global customer within the Territory.
(c) To Sell Products within the Territory to subsidiaries and
Affiliates of Cadence primarily for their internal use.
(d) To use, and to grant Cadence's customers the right to use,
Products in order for Cadence to provide services under Outsourcing arrangements
(as described in Section 1.13) with such customers.
2.4 NO RIGHT TO SOURCE CODE. CKK hereby acknowledges that the
human-readable source code of the Software contains the valuable trade secrets
and other confidential information of Cadence and its suppliers. CKK shall have
no right whatsoever to utilize, receive, review, or otherwise have access to the
human-readable source code version of the Software, unless Cadence expressly
grants such right in writing, if Cadence at its sole discretion deems such
access necessary for the proper marketing of the Products. CKK shall not (i)
reverse engineer, decompile, or disassemble the Products or otherwise reduce the
Software to human-perceivable form, (ii) attempt to derive the human-readable
source code of the Software, or (iii)
5.
<PAGE>
encourage or assist any third party in doing any of the foregoing. In the event
that CKK obtains or CKK becomes aware that its Distributors or any End User has
obtained any of the source code for the Products at any time, CKK shall promptly
deliver and return the same to Cadence and shall not retain a copy thereof or
deliver a copy to any other Person without Cadence's prior written consent, and
shall use its best efforts to cause any such Distributor(s) or End User(s) to do
the same.
2.5 NON-COMPETE.
(a) COMPETITIVE PRODUCTS. CKK agrees that during the term of this
Agreement CKK shall not develop, acquire an interest in (except for
investments in any publicly traded company which on a cumulative basis do not
exceed three percent (3%) of the outstanding shares of stock of such
company), promote, market, sell, license or otherwise distribute products
which, in Cadence's reasonable opinion, are competitive with any Products or
in the same product category as any of the Products ("Competitive Products"),
except for the products enumerated on Exhibit E ("Excluded Competitive
Products and Services"). CKK agrees that it will require its Distributors and
Affiliates not to develop, acquire an interest in (except for investments in
any publicly traded company which on a cumulative basis do not exceed three
percent (3%) of the outstanding shares of stock of such company), promote,
market, sell, license or otherwise distribute Competitive Products. The list
of the companies and products that CKK, its Affiliates, its Distributors and
their Affiliates currently represent is set forth on Exhibit E, and such
companies and products are not included in the category of Competitive
Products. CKK shall promptly notify Cadence in writing of any new
Distributors and Affiliates and of any new Competitive Products or companies
that produce Competitive Products which CKK, its Distributors and Affiliates,
or their Affiliates, propose to represent. With Cadence's approval such
Competitive Products may be added to Exhibit E. The foregoing obligations
shall not apply to the extent that CKK, its Affiliates, its Distributors or
their Affiliates are under a contractual obligation ("Existing Obligation")
to distribute any such Competitive Product as of the date (the "Obligation
Date") such entity becomes subject to the terms of this Section; provided,
however, that from and after the Obligation Date, (i) such entity shall not
enter into any further agreements or other obligations to provide such
Competitive Product to any party; and (ii) such entity shall cease the
promotion, marketing, sale, licensing or distribution of such Competitive
Product in compliance with the terms of this Section, all subject to the
right to fulfill any Existing Obligations. In the event an entity is subject
to Existing Obligations with respect to Competitive Products, such entity
shall, no later than the Obligation Date, notify Cadence of any such
obligations and the date of termination of each such obligations.
(b) COMPETITIVE SERVICES. CKK agrees that during the term of this
Agreement CKK shall not develop, acquire an interest in (except for investments
in any publicly traded company which on a cumulative basis do not exceed three
percent (3%) of the outstanding shares of stock of such company), promote,
market, sell or otherwise provide services which, in Cadence's reasonable
opinion, are competitive with the services provided by SKK ("Competitive
Services"), except for the services included in CKK Services, the library
development services currently provided by the Excellent Design, Inc., and any
services otherwise enumerated in Exhibit E ("Excluded Competitive Products and
Services"). CKK agrees that it will require its Distributors and Affiliates not
to develop, acquire an interest in (except for investments in any publicly
traded company which on a cumulative basis do not exceed three percent (3%) of
the outstanding shares of stock of such company), promote, market, sell or
otherwise provide Competitive Services. The list of services that CKK, its
Affiliates, its Distributors and their
6.
<PAGE>
Affiliates currently provide is set forth on Exhibit E, and such services are
not included in the category of Competitive Services. CKK shall promptly notify
Cadence in writing of any new Competitive Services or companies that provide
Competitive Services which CKK, its Distributors and Affiliates, or their
Affiliates propose to provide. With Cadence's approval such Competitive
Services may be added to Exhibit E. The foregoing obligations shall not apply
to the extent that CKK, its Affiliates, its Distributors or their Affiliates are
under a contractual obligation to provide any such Competitive Service as of the
Obligation Date; provided, however, that as of the Obligation Date (i) such
entity shall not enter into any further agreements or other obligations to
provide such Competitive Service to any party; and (ii) such entity shall cease
the promotion, marketing, sale, licensing or distribution of such Competitive
Service in compliance with the terms of this Section, all subject to the right
to fulfill any Existing Obligations. In the event an entity is subject to
Existing Obligations with respect to Competitive Services, such entity shall, no
later than the Obligation Date, notify Cadence of any such obligations and the
date of termination of each such obligation.
(c) PRODUCT AVAILABILITY. CKK understands and agrees that Cadence
reserves the right to discontinue developing, producing or marketing the
Products at its discretion at any time; and, consequently, that Cadence may
limit or discontinue the availability of Products to CKK based on Cadence's
decisions regarding the availability or discontinuation of the Products. In the
event that Cadence elects to discontinue any of the Products, Cadence will
continue to support such Product for such period of time as Cadence deems
commercially reasonable. Nothing herein shall be interpreted or construed to
limit in any way Cadence's right, in its sole discretion, to limit or
discontinue the availability of any Product hereunder.
3. MARKETING OBLIGATIONS OF CKK.
3.1 MARKETING ACTIVITIES. CKK agrees that during the term of this
Agreement, it shall use reasonable efforts to market the Products within the
Territory, all with due consideration for the local marketing environment in the
Territory. CKK shall conduct its marketing activities in a lawful manner with
the highest standards of fair trade, fair competition, and business ethics, and
shall cause its employees to do the same. CKK shall at all times follow the
policies set by Cadence from time to time for the marketing of the Products.
CKK shall regularly confer with Cadence with respect to marketing activities of
CKK's employees (provided that Cadence and CKK personnel shall not make any
agreement regarding Product purchase prices to be charged to Distributors or End
Users). CKK and Cadence shall cooperate in automating the ordering process so
that orders may be submitted to Cadence for acceptance in a prompt and accurate
manner. Cadence reserves the right to have Products manufactured in the
Territory by its designee, at its sole discretion, and CKK shall take, at
Cadence's expense, all actions that Cadence reasonably requests to facilitate
any such manufacturing arrangement that may be established by Cadence.
3.2 OFFICES AND FACILITIES. CKK shall maintain, or shall assure that
its Distributors maintain, offices adequate to market the Products in the
Territory. CKK shall offer facilities, or shall assure that its Distributors
offer, for the prominent display of the Products and the proper use,
demonstration and End User training for the Products.
3.3 STAFFING AND TRAINING. CKK or its Distributors shall retain and have
at its disposal at all times an adequate staff of trained and qualified
personnel to perform its obligations under this Agreement. CKK shall, at CKK's
sole cost and expense, and CKK shall
7.
<PAGE>
require its Distributors to, at their sole cost and expense, participate in
Cadence's mandatory sales and technical training courses, ensuring that its
applicable sales and/or technical employees attend such training. To assist CKK
and its Distributors with the distribution and support of new Products, Cadence
may provide training to CKK and its Distributors free of charge for any new
Product release during the term of this Agreement. All such training will be
provided at a site selected by Cadence. CKK shall, at CKK's sole cost and
expense, and CKK's Distributors shall, at their sole cost and expense, ensure
that its appropriate sales, technical and/or training personnel attend such
training.
3.4 ACTIVITIES. CKK shall participate in the following activities, at
CKK's expense and CKK shall require its Distributors to participate in the
following activities, at their expense: advertising the Products in appropriate
media (in accordance with Section 3.5 ("Advertising")), participating in trade
shows, conferences, expositions, and promotional seminars in the Territory, and
preparing product descriptions, promotional and marketing and other materials,
including translations of the promotional materials supplied by Cadence in
accordance with Section 6.1 ("Marketing Materials"), as Cadence and CKK deem
reasonable and appropriate for the successful marketing of the Products in the
Territory; PROVIDED, HOWEVER, that CKK shall, and CKK shall require its
Distributors to, provide Cadence with copies of all such materials prior to
their release and shall not distribute them without Cadence's prior written
approval. Except as authorized by Cadence, CKK and its Distributors shall not
modify manuals, training materials, marketing materials, presentations or any
other documents provided by Cadence, or alter any logos, trademarks or service
marks of Cadence.
3.5 ADVERTISING. CKK and its Distributors may advertise the Products in
advertising media of CKK's or its Distributors' choice, provided that the
primary audience or circulation is located in the Territory. In all advertising
and promotion of the Products, CKK and its Distributors shall comply with
Cadence's standard cooperative advertising policies as specified from time to
time by Cadence.
3.6 END USER AGREEMENTS. CKK shall cause each customer to whom CKK and
its Distributors distributes the Products to enter into a Japanese language
version of the End User Agreement. Any Japanese translation of the End User
Agreement must also be approved in writing by Cadence prior to use by CKK or its
Distributors.
3.7 TERMINATION OF END USER AGREEMENTS. Upon the termination of any End
User Agreement or breach thereof by the End User during the term of this
Agreement, CKK shall at its option, and CKK shall require each of its
Distributors, at its option, to, either (a) at its expense use reasonable
efforts (including litigation) to obtain from the End User a duly authorized
officer's certification that the Products and all documents containing
information related to the Products in the End User's possession have been
destroyed and to deliver such certification to Cadence; or (b) inform Cadence
thereof as soon as it is aware thereof so that Cadence may take, in its name,
at its expense and with CKK's cooperation, necessary measures (including
litigation) to obtain from the End User a certification of destruction as
described above and to confirm such destruction.
8.
<PAGE>
4. SUPPORT SERVICES.
4.1 CKK TRAINING. CKK and its Distributors shall have the sole
responsibility within the Territory to provide to End Users, on a charged basis,
training regarding the use of Products and Updates (the "CKK Training"). Such
training to be provided by CKK or its Distributors may be conducted on CKK
premises, Distributor premises, End User premises or other facilities chosen by
CKK, at its sole expense, or its Distributors, at their sole expense.
4.2 MAINTENANCE SERVICES. CKK understands and agrees that all
Maintenance Services, including Hotline Support (as described below) and
distribution of Updates (as described below), for the Products shall be sold
by SKK. Maintenance Services shall be provided only to those End Users who
have entered into a Maintenance Agreement with SKK for such services and
paid any applicable service fee. [*], by arrangement with [*], hereby [*] and
[*] to [*] pursuant to [*] for the [*] and [*] in the [*] of [*]. All [*]
shall be [*]. CKK and its Distributors will cooperate with SKK through the
Operations Committee to pass the name of End Users likely to need Maintenance
Services to SKK and, if reasonably necessary or appropriate, will participate
in joint customer visits to further SKK's introduction to the End Users.
(a) HOTLINE SUPPORT. CKK and Cadence agree that during the term of
this Agreement CKK shall, or CKK shall require one of its Distributors to, offer
first-response Technical Assistance to End Users in the Territory which have a
current Maintenance Agreement in effect. Such Technical Assistance shall be
available between the hours of 9:00 a.m. and 5:30 p.m., Territory time, Monday
through Friday (except holidays in the Territory). If CKK or such Distributor
is unable to adequately respond to an End User inquiry due to the technical
complexity of such question, CKK may contact SKK for backup support between the
hours of 9:00 a.m. and 5:30 p.m. Territory time, Monday through Friday (except
SKK-observed holidays) or refer such End User directly to SKK.
(b) DISTRIBUTION OF UPDATES. Cadence, by arrangement with SKK, will
provide Updates to End Users in the Territory which have a current Maintenance
Agreement in effect. CKK and its Distributors shall, upon request from Cadence,
promptly distribute all Updates provided to CKK in accordance with Section 6.2
("Provision of Updates") of this Agreement to all End Users which have a valid
Maintenance Agreement in effect on the release date of the Update. All Updates
shall be provided to such End Users free of charge.
4.3 ASSIMILATION SERVICES. Cadence hereby authorizes CKK and its
Distributors to sell Assimilation Services to End Users and potential End Users
within the Territory. CKK and its Distributors will have the sole right and
responsibility for providing these services on a charged basis to End Users.
CKK and its Distributors understand and agree that services provided to End
Users in respect of the sale and maintenance of the Products that exceed the
scope of CKK Training or Assimilation Services will be provided in the Territory
exclusively by SKK, except as otherwise provided in this Agreement or with the
prior approval of the Operations Committee (as defined in Section 7.1). CKK and
its Distributors will cooperate with SKK through the Operations Committee to
pass to SKK the name of End Users likely to need SKK services to SKK and, if
reasonably necessary or appropriate, will participate in joint customer visits
to further SKK's introduction to the End Users.
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
9.
<PAGE>
4.4 ERROR CORRECTIONS. Cadence shall have no obligation to correct any
errors or defects in Products resulting from modifications to Products made by
Persons other than Cadence. In the event that Cadence is requested by CKK or
its Distributors to correct any errors or defects in any portion of any Products
that have been modified by a Person other than Cadence or one of its Affiliates,
Cadence shall, in its sole discretion, determine whether it shall make such
correction, as well as the scheduling and cost thereof.
4.5 STANDARDS. All support provided by SKK, CKK and its Distributors to
End Users under this Section 4 ("Support Services") shall be performed in
accordance with best industry practices and such other reasonable standards as
Cadence may promulgate from time to time.
5. COVENANTS OF CKK.
5.1 NO UNAUTHORIZED USE. CKK shall not, and CKK shall require its
Distributors to agree that they shall not, use, or permit another Person to use,
the Products or any Intellectual Property Rights therein except as authorized in
this Agreement, and CKK specifically agrees that it shall not, and that CKK
shall require its Distributors to agree that they shall not, license or
otherwise distribute Products to any End User who CKK or the Distributors
believe or have reason to believe use such Product(s) in the development of any
system or program that is competitive with any Product.
5.2 NO UNAUTHORIZED REPRESENTATIONS OR WARRANTIES. CKK shall, and CKK
shall require its Distributors to, refrain from making any representations,
warranties or guarantees to customers or to the trade with respect to the
specifications, features or capabilities of the Products that are deceptive,
misleading or otherwise inconsistent with the literature distributed by Cadence
or its suppliers with respect thereto, and ensure that its Representatives also
refrain from doing so.
5.3 GENERAL OBLIGATIONS. CKK hereby agrees that it shall not, and CKK
shall require its Distributors to agree that they shall not:
(a) Alter, modify, reproduce or create derivative works from the
Products, the Software, or any part thereof. CKK shall not, and CKK shall
require its Distributors to agree that they shall not, directly or indirectly,
market or grant rights to the Products outside the Territory; provided, however,
that CKK may provide Cadence with leads for Global Deals for which CKK will
receive remuneration as described in Section 2.3(b); or
(b) Distribute the Products to any Person without first obtaining an
End User Agreement executed by that Person.
5.4 NO REPRODUCTION. The Products are distributed by Cadence subject in
every case to the condition that such distribution does not convey any license,
expressly or by implication, to manufacture, duplicate or otherwise copy or
reproduce any of the Products. CKK shall take, and CKK shall require its
Distributors to take, appropriate steps with its or their End Users, as Cadence
may request, to inform them of and assure compliance with the restrictions
contained in this section.
10.
<PAGE>
5.5 ADVICE. CKK shall advise, and CKK shall require its Distributors to
advise, Cadence of any legislation, rule, regulation or other law (including but
not limited to any customs, tax, trade, or tariff law) which is in effect or
which may come into effect in the Territory or parts thereof after the date of
this Agreement and which affects the import of the Products into, or the use of
the Products within, the Territory.
5.6 ERROR LIST. CKK shall prepare, and CKK shall require its Distributors
to prepare, a list of all errors in the Products of which it becomes aware or of
which it receives notification. It shall forward to Cadence and SKK the
additions, if any, to such list of errors on a timely basis. In the event that
CKK or any of its Distributors receives notification of any major problem with
the Products, it shall, and it shall require its Distributors to, immediately
notify Cadence and SKK by telephone. The list of errors provided to Cadence and
SKK shall indicate a priority of the problems to be resolved.
5.7 ADDITIONAL INFORMATION. CKK agrees to provide, and CKK shall require
its Distributors to provide, Cadence with such additional information pertaining
to potential End Users, products and activities of competitors and market
reactions as Cadence may reasonably request from time to time.
6. OBLIGATIONS OF CADENCE.
6.1 MARKETING MATERIALS. Cadence shall provide CKK with English language
marketing and promotional materials that Cadence, at its sole discretion, may
distribute with respect to the Products, upon payment by CKK of the
corresponding promotional materials fee, as determined by Cadence, which fee
shall equal Cadence's cost of preparing and delivering such materials to CKK.
6.2 PROVISION OF UPDATES. During the term of this Agreement, Cadence
(either directly or through one of its subsidiaries), shall provide CKK and its
Distributors with Updates which Cadence, in its sole discretion, considers to be
appropriate or necessary. In the event that Cadence provides any such Updates
to CKK and its Distributors, CKK and its Distributors shall promptly distribute
them to End Users within the Territory in accordance with Section 4.2(b)
("Distribution of Updates") of this Agreement.
6.3 PRODUCT MODIFICATIONS. If any End User or Distributor requests any
modification of the Products, including but not limited to porting the Products
to a hardware base not supported by Cadence at that time, CKK shall notify
Cadence of such request in writing, and Cadence shall notify CKK whether Cadence
is willing to develop (or have developed) the same and, if so, specify the cost
of such development. If Cadence, in its sole discretion, determines that it is
interested in developing (or having developed) such modification, and CKK elects
to have such modification developed, CKK shall pay to Cadence the specified
costs as mutually agreed to by the parties and shall have the right to charge to
the End User or Distributor any amount it deems appropriate for such
modification.
6.4 NO OTHER OBLIGATIONS. Except as specifically stated elsewhere in this
Agreement, Cadence shall have no other duties or obligations to CKK, its
Distributors, or any End User.
11.
<PAGE>
7. REVIEW OF CKK.
7.1 OPERATIONS COMMITTEE. The parties will form an operations committee
("Operations Committee") comprised of one (1) designated representative from
Cadence and two (2) designated representatives each of SKK and CKK. The
Operations Committee shall meet as often as is needed (but in no event less than
once per month), in order to discuss marketing and promotion efforts by CKK and
its Distributors; discuss and establish joint marketing efforts for Cadence,
SKK, CKK and its Distributors; evaluate Distribution Targets (as hereinafter
defined), and discuss any other issues that may arise regarding the
administration and performance of this Agreement.
7.2 DISTRIBUTION TARGETS. Cadence and CKK will meet [*], near [*] to
establish [*] for the distribution of the Products by CKK and its
Distributors to End Users in the Territory during the next [*]. Cadence and
CKK will also establish [*] which include [*], and other initiatives
including but not limited to [*]during the next [*]. The [*] will be
attached as an amendment to this Agreement prior to the Effective Date. CKK
agrees that it shall [*] each [*]. CKK understands and agrees that [*].
7.3 RECORDS AND REPORTS. CKK agrees, and CKK shall require its
Distributors, to keep all proper records and books of account and all proper
entries therein relating to its distribution of the Products under this
Agreement, including, at a minimum, the following information as to each
distributed Product: the name, address and principal contact of each End User,
the date of delivery of the Products to such End User and an itemization of each
Product(s) delivered to such End User. The parties agree that the foregoing
requirements are satisfied by the information required by the form of purchase
order currently used by Innotech Corporation. CKK shall, and CKK shall require
its Distributors to, provide Cadence with operations reports and reports on End
Users as follows:
(a) [*] are due on [*] of [*] and shall include but not be limited
to [*] and [*].
(b) A [*] of all [*] and for [*] shall be submitted [*].
(c) Such other information as Cadence may reasonably request from
time to time.
7.4 END USER SATISFACTION. CKK, Cadence and SKK shall use, and CKK shall
require its Distributors to use, reasonable efforts to ensure End User
satisfaction, and to maintain the good reputation of the Products and of
Cadence. CKK, Cadence and SKK understands and agrees, and CKK shall require its
Distributors to agree, that there may be a lag time between any reduction in End
User satisfaction and a decrease in Sales of the Product; consequently, CKK,
Cadence and SKK shall each have the right to conduct a survey of End User
satisfaction at any time during the Term. Such a survey shall evaluate End User
satisfaction both on an overall basis, and on an End User-by-End User basis.
7.5 CKK MANAGEMENT. CKK will notify Cadence prior to any material changes
in its management team relating to the business of the Products. CKK shall
implement such changes (to the extent such changes are within the reasonable
control of CKK) only if such changes are reasonably acceptable to Cadence. If
Cadence does not accept such changes, Cadence shall
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
12.
<PAGE>
exercise reasonable efforts to collaborate with CKK in locating qualified
management personnel required for such changes.
8. ORDERS AND DELIVERY.
8.1 ORDERS. All orders placed by CKK for Products require a written
purchase order and are subject to acceptance and acknowledgment by Cadence. No
order shall be binding upon Cadence until accepted by Cadence, and Cadence shall
have no liability to CKK with respect to purchase orders that are not accepted.
Cadence shall use commercially reasonable efforts to notify CKK of the
acceptance or rejection of an order and of the assigned delivery date for
accepted orders within ten (10) days after receipt of the purchase order. Each
order must include an "End User Designation" listing the name, address and
principal contact of the End User; the discount from Cadence's Japan yen
suggested list price; and the price paid by the End User for each Product. Any
additional or different terms on CKK's purchase order form shall have no force
or effect and shall be superseded by the terms of this Agreement. SKK, by
arrangement with Cadence, will provide order entry services for CKK and its
Distributors.
8.2 SHIPPING; ACCEPTANCE; RISK OF LOSS. All Products and Updates
delivered pursuant to the terms of this Agreement shall be suitably packed for
shipment in Cadence's standard shipping cartons, as directed by Cadence. Risk
of loss shall pass to CKK upon delivery of the order to carrier. Unless
otherwise instructed in writing by CKK, Cadence shall select the carrier and
method of shipment. All duties, freight, insurance, and other shipping
expenses, as well as any special packing expense, for Product and Update
delivery shall be paid by CKK. CKK shall also bear all applicable Taxes that
may be assessed against the order after delivery to the carrier. All Products
and Updates shall be deemed accepted upon receipt by CKK.
8.3 DOA PRODUCT. A Dead on Arrival ("DOA") Product means any copy of a
Product that, upon receipt, is defective in any respect due to a defect in the
media on which such copy is recorded. Cadence either will, in its sole
discretion, promptly repair or replace any DOA Product or credit CKK's account
therefor. Before returning a DOA Product to Cadence, CKK agrees to first obtain
a return authorization number from Cadence and to label the DOA Product with
such number. Cadence shall pay return shipping and insurance charges on all DOA
Products returned.
8.4 DEFECTIVE PRODUCTS UNDER WARRANTY. The rights and obligations of CKK
and its Distributors and Cadence with respect to Products returned by End Users
as defective within any applicable Warranty Period are described in Section 13.1
("End User Warranty").
8.5 CANCELLATION OF ORDERS. Cadence reserves the right to cancel or
suspend any orders placed by CKK and accepted by Cadence, or to refuse or delay
shipment thereof, if CKK (a) fails to make any payment as provided herein or in
any invoice, (b) fails to meet credit or financial requirements established by
Cadence, or (c) otherwise fails to materially comply with the terms and
conditions of this Agreement.
8.6 USE OF CADENCE SALES SUPPORT SYSTEMS. Cadence will make available
to CKK and its Distributors, and CKK and its Distributors will use, [*] and [*]
including other information systems as introduced by Cadence during the term
of this Agreement. The foregoing will be provided to CKK without charge,
provided that CKK shall pay or reimburse Cadence for the cost of equipment
and telecommunications charges associated with the provision
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
13.
<PAGE>
of such systems to CKK and its Distributors. Cadence will provide training free
of charge at Cadence's designated training sites to CKK and its Distributors
for any systems introduced during the term of this Agreement. CKK, at its sole
cost and expense, and CKK's Distributors, at their sole cost and expense, will
ensure that its appropriate sales, technical and support personnel attend such
training.
9. PAYMENT TERMS AND CONDITIONS.
9.1 [*] MARKETING RIGHTS. In consideration of CKK's assistance to
Cadence in developing the Japanese market, CKK shall [*] for [*].
9.2 RETAIL PRICES. CKK is [*] for [*] and [*]. CKK and Cadence agree
that [*] may [*] by giving [*] no fewer than [*] days' prior written notice.
The [*] and [*] shall be [*] for [*] the Products. Cadence's current product
and price list is included in Exhibit B ("Products and Prices") attached
hereto.
9.3 COST OF PRODUCTS. CKK agrees to [*] and [*].
9.4 [*] CKK. CKK and Cadence will [*]. [*] for [*] is specified in [*],
which may be [*] with [*].
9.5 [*] [*]. [*] with respect to training fees collected by [*] for [*]
in accordance with Section [*] shall pay to or reimburse [*] any [*].
9.6 [*]. [*] with respect to [*], but [*] shall pay to, or reimburse,
[*] in [*].
9.7 [*]. [*] with respect to services provided by SKK, by arrangement
with Cadence, for [*] from [*].
9.8 PAYMENT TO [*] FOR [*]. [*] shall compensate [*] for [*] including
[*] and other [*]. Compensation shall equal [*] less the [*] for [*] and [*].
SKK and CKK will meet [*] to agree on [*].
9.9 PAYMENT FOR [*]. [*] shall pay [*] for all work or services
performed by Cadence in connection with [*] any [*] within [*] days of the
date of invoice [*], plus related travel and other expenses.
9.10 BILLING AND PAYMENT. Billing and payment shall be in U.S. dollars.
Payment of amounts invoiced by Cadence shall be made by CKK in U.S. dollars
within thirty (30) days after receipt of the Products. Cadence shall have
the right to fulfill orders accepted by Cadence through a series of partial
shipments, and each such shipment shall be separately invoiced and paid for.
Past due accounts shall be subject to a late payment charge at the rate of
the less of 1 1/2% per month or the highest interest rate permissible under
applicable law, whichever is lower. If CKK determines that any Product is
DOA, as described in Section 8.3 ("DOA Product"), CKK shall pay the invoiced
amount within thirty (30) days after receipt of the repaired or replaced
Product, without any interest payment to Cadence.
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
14.
<PAGE>
9.11 TAXES. Except for any withholding taxes required to be paid
that have actually been paid by CKK, the prices set forth on Exhibit B
("Products and Prices") are exclusive of Taxes and all payments by CKK and
its Distributors to Cadence shall be made free and clear of, and without
reduction for, any and all Taxes. Any such Taxes (other than withholding
taxes) which are otherwise imposed on payments to Cadence shall be the sole
responsibility of CKK and its Distributors. CKK and its Distributors shall
provide Cadence with official receipts issued by the appropriate taxing
authority or such other evidence as is reasonably requested by Cadence to
establish that such taxes have been paid.
10. OWNERSHIP.
10.1 INTELLECTUAL PROPERTY RIGHTS. CKK acknowledges, and CKK shall
require its Distributors to acknowledge, the exclusive right, title and
interest of Cadence, and its suppliers in and to any and all Intellectual
Property Rights, and CKK will not at any time do or cause to be done any act
or thing impairing or tending to impair any part of said right, title and
interest. CKK acknowledges and agrees that all of these Intellectual
Property Rights shall remain the exclusive property of Cadence, and its
suppliers.
10.2 LITERATURE. All marketing materials, service manuals,
demonstration equipment, or other similar items (if any) which Cadence may
furnish to CKK or its Distributors (and any translations of the foregoing,
whether prepared by or on behalf of Cadence, CKK or any Distributor) shall
remain the property of Cadence, shall be treated as Confidential Information
by CKK, and shall be returned to Cadence upon Cadence's request or at the
expiration or termination of this Agreement, whichever occurs sooner.
10.3 NOTICE OF CLAIMS. CKK shall, and CKK shall require its
Distributors to, promptly notify Cadence (i) of any claims or objections that
its use of the Products or any of the Intellectual Property Rights in
connection with the marketing, distributing, support or service of the
Products may or will infringe the copyrights, patents, trademarks or other
proprietary rights of another Person; and (ii) of any and all infringements,
imitations, illegal use, or misuse, by any Person, of the Products or of any
Intellectual Property Rights which come to its attention; PROVIDED, HOWEVER,
that CKK will not, and CKK shall require its Distributors to agree that they
will not, take any legal action relating to the protection of any
Intellectual Property Rights without the prior written approval of Cadence,
and CKK and its Distributors shall render Cadence all reasonable assistance
in connection with any matter pertaining to the protection of the
Intellectual Property Rights, whether in the courts, administrative agencies,
or otherwise.
11. TRADEMARKS AND TRADE NAMES.
11.1 AUTHORIZATION TO USE. In the marketing, advertising for, and
distribution and support of the Products in the Territory, CKK may, and CKK may
grant its Distributors the right to, (i) indicate to the public that it is an
authorized distributor of Products, and (ii) use the trade names and trademarks
of Cadence and its suppliers, as set forth on Exhibit D ("Trademarks and Trade
Names"), which Exhibit Cadence may, in its sole discretion, revise from time to
time (the "Trademarks"). For this purpose, Cadence grants CKK a non-exclusive,
royalty-free, limited license to use and display the Trademarks, in the forms as
may be prescribed by Cadence from time to time, and sublicense its Distributors
to do the same. CKK shall, and CKK shall require its Distributors to, market,
distribute, and support the Products only under the Trademarks, and not under
any other trademark or logo. CKK will not, and CKK will require each of its
15.
<PAGE>
Distributors to agree that it will not, make or permit alteration of the
Products or removal or modification of any tags, proprietary notices, labels,
or other identifying marks placed by Cadence or its suppliers on the Products
or associated literature.
11.2 OWNERSHIP OF TRADEMARKS. CKK acknowledges and agrees, and CKK
will require its Distributors to acknowledge and agree, that (a) Cadence and
its Affiliates are the exclusive owners of the Trademarks; (b) the use of the
Trademarks by CKK or its Distributors does not convey to CKK or such
Distributors any right, title or interest in or to the Trademarks; (c) CKK or
such Distributor may not contest the Trademarks, or register or attempt to
register in any jurisdiction any Trademark or any confusingly similar
trademark or trade name; (d) CKK or such Distributor agrees not to use the
Trademarks with respect to any products or materials not provided by Cadence,
or in any way which might result in confusion as to Cadence, CKK, SKK or any
third party being separate and distinct entities.
11.3 APPROVALS. All public announcements or advertisements by CKK
or its Distributors indicating that it is an authorized distributor of the
Products, and any other representations of the Trademarks that CKK or its
Distributors intends to use, shall first be submitted to Cadence for written
approval. In connection therewith, CKK agrees that it shall, and that it
shall require its Distributors to, modify to Cadence's sole satisfaction the
use of any Trademark to which Cadence, in its sole discretion, may object.
CKK shall not, and CKK shall require each of its Distributors to agree that
it shall not, do or suffer to be done any act or thing that would impair
Cadence's or its suppliers' rights in its Trademarks or damage the reputation
for quality inherent in the Trademarks. Cadence and its suppliers reserve
the right to take all action which they deem necessary to ensure that the
advertising and promotional materials related to the Products utilized by CKK
or its Distributors are consistent with the reputation and prestige of the
Trademarks.
11.4 INFRINGING PRODUCTS. In order to assure proper use and
protection of the Trademarks, CKK agrees, and it shall require each of its
Distributors to agree, to provide written notification to Cadence if CKK or
such Distributor purchases, or receives an offer to purchase, any products
with a Trademark from a source other than Cadence.
12. NONDISCLOSURE OF CONFIDENTIAL INFORMATION.
12.1 ACCESS AND USE OF CONFIDENTIAL INFORMATION. During the course
of performance of this Agreement, each party will disclose (the "Disclosing
Party') certain Confidential Information to the other party (the "Receiving
Party") solely to permit the Receiving Party to perform its obligations under
this Agreement. Each Receiving Party agrees that such Confidential
Information shall be kept secret by the Receiving Party during the term of
this Agreement and for five (5) years after the expiration hereof. The
Receiving Party shall refrain from using or exploiting any and all
Confidential Information of the Disclosing Party for any purposes or
activities other than those contemplated in this Agreement.
12.2 AGREEMENT NOT TO DISCLOSE CONFIDENTIAL INFORMATION. The
Receiving Party shall not disclose or facilitate disclosure of such
Confidential Information to any Person without the prior written consent of
the Disclosing Party, except, in the case of CKK, to its Distributors,
Representatives or End Users, and then only to the extent necessary for the
performance of the activities contemplated by this Agreement or the End User
Agreements, respectively. CKK shall cause each of its Distributors,
Representatives or End Users with access to the Confidential
16.
<PAGE>
Information of Cadence to enter into a nondisclosure agreement in a form
approved by Cadence in writing. The Receiving Party shall use the highest
standard of care currently employed by any distributor or end user of high
technology products in order to avoid disclosure or misappropriation of the
Confidential Information.
12.3 OWNERSHIP AND RETURN OF CONFIDENTIAL INFORMATION. All files,
lists, records, documents, drawings, specifications, equipment and computer
programs which incorporate or refer to all or a portion of the Confidential
Information of Cadence shall remain the sole property of Cadence or its
suppliers. Such materials shall be promptly returned (i) upon Cadence's
reasonable request, or (ii) in accordance with Section 21.3 ("Return of
Materials") of this Agreement, upon termination of this Agreement, whichever
is earlier. In addition, the parties agree that the End User information
supplied pursuant to Section 7.3 is the Confidential Information of Cadence.
Notwithstanding the foregoing, the parties agree that any End User
information retained in the memory of CKK employees, but not reduced to
writing or other tangible form by such employees after return of Cadence's
Confidential Information as required by this section, may be used by CKK, but
not disclosed to any third party, subsequent to the termination of this
Agreement, even if such End user information was in written or other tangible
form prior to its return to Cadence.
12.4 INJUNCTIVE RELIEF. CKK understands and agrees that the
Confidential Information constitutes valuable business assets of Cadence and
its suppliers, the unauthorized use or disclosure of which may irreparably
damage Cadence and/or its suppliers. In the event of breach of confidence or
threatened breach of CKK's confidentiality obligations pursuant to this
section, Cadence and/or its suppliers shall be entitled to an injunction
restraining CKK from violating such obligations under this section. Nothing
in this section shall be construed as prohibiting Cadence and/or its
suppliers from pursuing any other remedies available to them for such breach
or threatened breach by CKK.
12.5 EXCEPTIONS. The provisions of this section shall not apply, or
cease to apply, to data and information supplied by Cadence or its suppliers
if such data or information (i) was already known to CKK; (ii) came into the
public domain without breach of confidence by CKK or any other Person; (iii)
was received by CKK from a third party without restrictions on their use in
favor of Cadence or its suppliers; or (iv) is required to be disclosed
pursuant to any statutory or regulatory provision or court order; provided
that CKK shall have the burden of establishing any of the foregoing
exceptions by conclusive evidence.
13. PRODUCTS PROVIDED "AS-IS".
13.1 END USER WARRANTY. Should a Product fail to perform as
warranted within the warranty period extended to End Users in the End User
Agreement, Cadence will replace the defective Product, at its sole cost and
expense, when it is returned to CKK or such Distributor by the applicable End
User during the relevant warranty period. Proof of date of delivery of the
returned product is required. If Cadence is unable to replace the defective
Product, CKK will refund the purchase price of the Product to the End User.
In the event CKK refunds to an End User the purchase price of any Product
under warranty, Cadence agrees to credit CKK the amount paid by CKK to
Cadence for such Product, provided that CKK returns the defective Product to
Cadence with documentation sufficient to establish that the Product was
defective during the warranty period and that such defect was covered by the
warranty. The warranty extended to End Users will not apply if the Product
fails or is damaged after delivery to the End
17.
<PAGE>
User due to accident, abuse or misuse, or if the Product has been used or
maintained in a manner not conforming to Product manual instructions, has
been modified in any way, or has had any serial number removed or defaced.
Repair by anyone other than Cadence or its Affiliates, CKK or its
Distributors will void the End User warranty. CKK may exchange a defective
Product with a replacement Product from CKK's inventory. In such event,
Cadence will promptly restock CKK's inventory with a replacement unit of the
Product.
13.2 NO WARRANTIES. CADENCE AND ITS SUPPLIERS DO NOT WARRANT THE
OUTPUT OF THE PRODUCTS TO MEET THE TECHNICAL DESIGN OR OTHER STANDARDS OR
REQUIREMENTS WHICH MAY BE APPLICABLE TO ANY PERSON'S BUSINESS. CADENCE AND
ITS SUPPLIERS DO NOT MAKE OR GIVE ANY REPRESENTATION OR WARRANTY WITH RESPECT
TO THE USEFULNESS OR THE EFFICACY OF THE PRODUCTS, IT BEING UNDERSTOOD THAT
THE DEGREE OF SUCCESS WITH WHICH EQUIPMENT, SOFTWARE PROGRAMS AND MATERIALS
CAN BE APPLIED TO ELECTRONIC DESIGN AUTOMATION IS DEPENDENT UPON MANY
FACTORS, MANY OF WHICH ARE NOT UNDER CADENCE'S OR ITS SUPPLIERS' CONTROL.
EXCEPT AS PROVIDED IN SECTION 13.1, THE PRODUCTS ARE DELIVERED TO CKK "AS-IS"
WITHOUT WARRANTY OF ANY KIND. EXCEPT AS PROVIDED IN SECTION 13.1, ALL
WARRANTIES, EXPRESS OR IMPLIED OR IMPOSED BY STATUTE OR OTHERWISE, IN RESPECT
OF THE PRODUCTS AND ANY RELATED SERVICES, INCLUDING ANY WARRANTIES AS TO
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR CORRESPONDENCE WITH
DESCRIPTION, AND NONINFRINGEMENT, ARE HEREBY EXCLUDED.
14. LIMITATION ON DAMAGES.
14.1 IN NO EVENT WILL CADENCE OR ITS SUPPLIERS BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES EVEN IF, CADENCE OR
ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
CADENCE'S AND ITS SUPPLIERS' AGGREGATE CUMULATIVE LIABILITY FOR DAMAGES SHALL
NOT EXCEED THE AGGREGATE PAYMENTS RECEIVED BY CADENCE FROM CKK FOR THE
PRODUCTS THAT ARE THE BASIS OF CADENCE'S AND/OR ITS SUPPLIERS' LIABILITY.
14.2 IN NO EVENT WILL CKK OR ITS DISTRIBUTORS BE LIABLE FOR ANY
SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES EVEN IF CKK OR ITS
DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CKK'S AND
ITS DISTRIBUTORS' AGGREGATE CUMULATIVE LIABILITY FOR DAMAGES SHALL NOT EXCEED
THE AGGREGATE PAYMENTS RECEIVED BY CADENCE FROM CKK FOR THE PRODUCTS THAT ARE
THE BASIS OF CKK'S AND/OR ITS DISTRIBUTORS' LIABILITY.
15. INDEMNIFICATION.
15.1 CKK INDEMNIFICATION OF CADENCE AND ITS AFFILIATES. CKK agrees
to indemnify and hold Cadence and its Affiliates harmless from and against
any and all claims, suits, proceedings, losses, liabilities, damages, costs
and expenses (inclusive of Cadence's and its Affiliates' reasonable
attorneys' fees) (collectively, "Liabilities") made against or incurred by
Cadence and its Affiliates as a result of any breach of this agreement by
CKK, or breach of any
18.
<PAGE>
duty, warranty or obligation hereunder, or resulting from any claim by reason
of any act on the part of CKK and its Representatives that is outside the
scope of this Agreement. CKK shall be solely responsible for, and shall
indemnify and hold Cadence and its Affiliates harmless from and against, any
and all Liabilities based upon warranties or representations made by CKK and
its Representatives which differ from the warranty approved by Cadence in the
End User Agreement and differ from any representations of Cadence made in
Cadence's documentation for the Products.
15.2 CADENCE INDEMNIFICATION OF CKK. Cadence agrees to indemnify
and hold CKK and Distributors harmless against any and all Liabilities
resulting from any breach by Cadence of this Agreement or breach of any duty,
warranty or obligation hereunder, or resulting from any claim that may be
made by reason of any act or omission of Cadence and its Representatives;
PROVIDED, HOWEVER, that any Liabilities arising from the infringement or
alleged infringement of any proprietary rights of another Person shall not be
covered by this indemnity unless such Liabilities arise from the infringement
or alleged infringement of any United States registered copyright or patent
(hereinafter collectively "Third Party Proprietary Rights") by the current
and unmodified versions of the Products, in which case Cadence also agrees to
indemnify End Users under the terms of the End User Agreement. If any claim
is made or any proceeding is instituted against CKK and/or End Users to which
the indemnity set forth in this section applies, CKK shall notify Cadence
thereof, and Cadence, at its expense, shall respond to such claim and shall
conduct such proceedings on behalf of CKK and/or End Users under the terms of
the End User Agreement. CKK agrees that it will fully cooperate, and use
its reasonable efforts to cause all End Users to cooperate, with Cadence to
resolve any such claims.
15.3 REMEDIES FOR INFRINGEMENT. Should the use of the current and
unmodified versions of the Products furnished by Cadence to CKK hereunder be
found by a court of competent jurisdiction to infringe any Third Party
Proprietary Rights, and should CKK's and/or the End Users' use of the Products
be enjoined, then Cadence shall in a reasonable time either:
(a) obtain for CKK and/or End Users the right to use the Products;
(b) modify the Products so that their use no longer infringes any
Third Party Proprietary Rights; or
(c) replace the Products with programs that do not infringe any Third
Party Proprietary Rights.
(d) Should Cadence fail to or be unable to take one of the steps
set forth in subsections (a) through (c) above, then Cadence shall request
CKK to return the Products and upon their return, refund the price paid by
CKK for the Products, less a reasonable charge for the time during which CKK
and/or End Users had use of the Products. Cadence shall make this refund
over a period of time to be determined by good faith negotiations but not to
exceed ninety (90) days following return of the Products. Notwithstanding
the limitation of liability provided in Section 14, and notwithstanding the
proviso in the first sentence of Section 15.2 which provides that liabilities
arising from intellectual property infringement shall not be covered by the
indemnity set forth in Section 15.2 unless such liability arises from the
infringement or alleged infringement of any United States registered
copyright or patent ("Patent Liabilities"), if CKK is subject to a claim from
a third party which claim alleges damages in excess of the limitations of
Section 14 or alleges liability for intellectual property infringement other
than the
19.
<PAGE>
Patent Liabilities set forth above, the parties will discuss in good faith
joint strategies for the defense of such claim and the sharing of liabilities
notwithstanding such limitations or proviso. CKK agrees that the foregoing
shall be CKK's sole and exclusive remedies in the event any Product is
determined to infringe any Third Party Proprietary Right.
16. COMPLIANCE WITH APPLICABLE LAWS.
16.1 EXPORT CONTROL. In the performance of their respective
obligations under this Agreement, Cadence and CKK shall, at all times,
strictly comply with all applicable laws, regulations and orders of the
United States, Ireland, and the Territory. Without limiting the generality
of this section, CKK specifically acknowledges that the Products and the
Confidential Information supplied to CKK in accordance with the terms of this
Agreement are subject to the United States export controls, pursuant to the
Export Administration Regulations, 15 C.F.R. Parts 368-399, and CKK agrees,
and shall cause each Distributor and End User to agree, that it shall not
export or reexport the Products, the Confidential Information or any direct
product thereof, directly or indirectly to, or for use in, any country
outside the Territory without the prior written authorization of Cadence and
the United States government.
16.2 AUTHORIZATION. CKK shall, at its own expense, make, obtain,
and maintain in force at all times during the term of this Agreement, all
reports, licenses, permits and authorizations (collectively,
"Authorizations") required under applicable law, regulation or order in the
Territory in order for CKK to perform its obligations under this Agreement.
Cadence shall provide CKK with such assistance as CKK may reasonably request
in making or obtaining any such Authorizations. In the event that the
issuance of any such Authorization is conditioned upon an amendment or
modification to this Agreement which is reasonably unacceptable to Cadence,
Cadence shall have the right to terminate this Agreement without any further
obligation whatsoever to CKK.
16.3 OTHER LAWS. At its own expense, CKK shall comply with all
applicable laws, regulations, rules, ordinances and orders regarding its
activities related to this Agreement. Without limiting the foregoing, CKK
shall comply with the U.S. Foreign Corrupt Practices Act and shall not make
any payments to third parties which would cause Cadence or CKK to violate
such laws.
17. ASSIGNMENT.
17.1 LIMITS ON ASSIGNMENT BY CKK. At any time, but no less than,
one (1) year after the Effective Date, CKK may assign all of its rights and
delegate all of its obligations under this Agreement to Innotech. Except as
set forth above, CKK shall not assign any of its rights, or delegate any of
its obligations, under this Agreement, either directly or indirectly, by
operation of law or otherwise, without the prior written consent of Cadence.
Any attempt by CKK to assign any of its rights or delegate any of its duties
hereunder in violation of this Section 17.1 shall be null and void.
17.2 ASSIGNMENT BY CADENCE. Cadence may upon written notice to CKK
freely assign any or all of its rights or duties under this Agreement to an
Affiliate of Cadence which has substantially the same rights and capabilities
of Cadence (including the right to distribute Products) to fulfill its
obligations under this Agreement, on the condition that the assignee's
20.
<PAGE>
rights and obligations under this Agreement remain unmodified and in full force
and effect in accordance with the terms of this Agreement.
17.3 SUCCESSORS AND ASSIGNS. This Agreement shall be binding upon and
inure to the benefit of the parties hereto and their successors and permitted
assigns.
18. DISPUTE RESOLUTION. The following procedure will be adhered to in all
disputes or with respect to any other problems arising under this Agreement
which the parties, including Distributors, cannot resolve informally. The
aggrieved party shall notify the other party in writing of the nature of the
dispute or other problem with as much detail as possible about the deficient
performance, if any, of the other party or otherwise as to the nature of the
dispute or problem. A representative appointed by each of the parties
("Dispute Resolvers") shall meet (in person or by telephone) within seven
days after the date of the written notification to reach an agreement about
the nature of the deficiency or problem and the corrective action to be taken
by the respective parties. The Dispute Resolvers shall produce a report
about the nature of the dispute or problem in detail to their respective
management. If the Dispute Resolvers are unable to agree on corrective
action or their agreement is not implemented, the managers to whom the
Dispute Resolvers (directly or indirectly) report ("Management") shall meet
or otherwise act to facilitate an agreement within 14 days of the date of the
written notification. If Management cannot resolve the dispute or problem or
otherwise agree upon a written plan of corrective action to do so within
seven days after their initial meeting or other action, of if the agreed-upon
completion dates in the written plan of corrective action are exceeded,
either party may request arbitration as provided for in Section 19
("Arbitration. Choice of Forum and Venue"). Except as otherwise
specifically provided, neither party shall terminate this Agreement for
breach or initiate arbitration, unless and until this dispute resolution
procedure has been employed or waived.
19. ARBITRATION.
19.1 ARBITRATION. Any dispute, controversy or claim arising out of
or relating to this Agreement, or the breach, termination, or invalidity
thereof, that cannot be settled amicably through the dispute resolution
procedure under Section 18 ("Dispute Resolution") shall be settled by final
and binding arbitration pursuant to the Japan-American Trade Arbitration
Agreement of September 16, 1952, if Cadence is the respondent, in San
Francisco, California, United States of America, by the American Arbitration
Association ("AAA") in accordance with the UNCITRAL Arbitration Rules in
effect on the date of this Agreement, or, if CKK is the respondent, in Tokyo,
Japan by the Japan Commercial Arbitration Association ("JCAA") in accordance
with the UNCITRAL Arbitration Rules. There shall be three (3) arbitrators and
each party hereto is entitled to designate one arbitrator for confirmation by
AAA or JCAA, as the case may be. If a party fails to nominate an arbitrator
within the time period specified by the applicable rules of AAA or JCAA, as
the case may be, the Chairman of AAA or JCA, as the case may be, shall
appoint an arbitrator for that party. The two arbitrators so designated by
the parties hereto shall agree on the third arbitrator, who will act as the
Chairman of the board of arbitrators. In the event of their being unable to
agree upon the third arbitrator within thirty (30) days of after their
confirmation by AAA or JCAA, as the case may be, the third arbitrator shall
be nominated by the Chairman of AAA or JCAA, as the case may be.
The language of the arbitration shall be English. At the first
arbitration hearing, the parties will (i) agree on the discovery schedule for
the arbitration, (ii) arrange an acceptable
21.
<PAGE>
schedule for the resolution of any procedural or legal issues and (iii) in all
respects arrange for the most expeditious hearing possible of the matters in
dispute.
19.2 SCOPE. The arbitrator or arbitrators shall be empowered to
award only those damages which are permitted in this Agreement, subject to
any disclaimers of damages and liability limits set forth in this Agreement,
but the arbitrator or arbitrators shall not have the authority to reform,
modify or materially change this Agreement. The award rendered by the
arbitrator(s) shall include costs of the arbitration, reasonable attorneys'
fees and reasonable costs for experts and other witnesses. Judgment on the
award may be entered in any court having jurisdiction.
19.3 PROVISIONAL RELIEF. The parties agree that the arbitrator(s)
shall have the authority to issue interim orders for provisional relief,
including, but not limited to, orders for injunctive relief, attachment or
other provisional remedy, as necessary to protect either party's name,
proprietary information, trade secrets, know-how or any other proprietary
right. The parties agree that any interim order of the arbitrator(s) for any
injunctive or other preliminary relief shall be enforceable in any court of
competent jurisdiction. In addition, nothing in this Agreement shall be
deemed as preventing either party from seeking provisional relief in order to
protect that party's name or proprietary rights.
19.4 BINDING NATURE OF AWARD. The award of the arbitrator shall be
final and binding upon the parties without appeal or review. In connection
with any application to confirm, correct or vacate the arbitration award, any
appeal of any order rendered pursuant to any such application, or any other
action required to enforce the arbitration award, the prevailing party shall
be entitled to recover its reasonable attorneys' fees, disbursements and
costs incurred in any post-arbitration award activities.
20. TERM AND TERMINATION.
20.1 TERM. This Agreement shall be effective from and after the
Effective Date for a period of ten (10) years (the "Initial Term"), unless
terminated earlier in accordance with the terms of this section. Following the
Initial Term, this Agreement shall be automatically renewed upon the agreement
of the parties for additional five (5) year terms (each, a "Renewal Term").
20.2 IMMEDIATE TERMINATION. Notwithstanding the provisions of Section
18 ("Dispute resolution"), this Agreement may also be terminated, effective
immediately, by giving written notice upon the occurrence of any of the
following events:
(a) By Cadence upon any breach by CKK of its duties and obligations
under Section 2.4 ("No Right to Source Code"), or Section 12 ("Nondisclosure of
Confidential Information") of this Agreement;
(b) By either party upon the dissolution or insolvency of the other
party, or petition for bankruptcy of the other party made by such other party,
and/or the appointment of a trustee or receiver in bankruptcy for the other
party;
(c) By either party, in the event of a petition for bankruptcy of the
other party, which petition is made by a third party and is not withdrawn or
dismissed within one hundred twenty (120) days after it is made;
22.
<PAGE>
(d) By Cadence upon the enactment of a law, decree, or regulation by
any governmental unit within the Territory which would (i) materially adversely
affect the right of Cadence to terminate or elect not to renew this Agreement as
herein provided, or (ii) materially impair or restrict Cadence's right, title or
interest in the Products or the Intellectual Property Rights therein; or
(e) By Cadence in the event CKK fails to make any payment when due
and fails to cure such breach within sixty (60) days after the date of notice by
Cadence; or
(f) By Cadence in the event CKK attempts to assign its rights or
delegate its obligations under this Agreement without obtaining Cadence's
consent if required by Section 17.1 ("Limits on Assignment by CKK").
(g) By either party if the other party undergoes (i) a sale of all or
substantially all of its assets, or (ii) a change, within any ninety (90) day
period, of the Persons that control 50% or more of its equity securities or
voting interests; PROVIDED, HOWEVER, that any reorganization or merger of CKK
with Innotech shall not trigger this provision.
20.3 TERMINATION FOR MATERIAL BREACH. If either party shall commit
any material breach or be in material default of its duties and obligations
under this Agreement, other than those breaches covered by Section 20.2
("Termination for Cadence's Failure to Deliver Competitive Product"), and
Section 20.3 ("Immediate Termination"), the non-breaching party may give to the
breaching party written notice of the breach or default and may request that
such breach or default be cured. If the breaching party shall fail to cure such
breach or default within sixty (60) days after the date of the notice of breach
or default, the non-breaching party, subject to the provisions of Section 18
("Dispute Resolution"), may terminate this Agreement immediately by giving
written notice of termination to the breaching party.
21. EFFECT OF TERMINATION.
21.1 ORDERLY TERMINATION. In the event of termination of this
Agreement, regardless of the cause thereof, the parties shall abide by and
uphold any rights or obligations accrued or existing on the date of termination,
including obligations to provide Product to End Users. The parties agree to
continue cooperating with each other and to carry out an orderly termination of
their relations. CKK agrees to cease continued marketing of the Products and
will thereafter not enter into any End User Agreement or any other type of
agreement with regard to the Products.
21.2 ASSIGNMENT OF END USER AGREEMENTS. Notwithstanding the
termination of this Agreement for any reason whatsoever, all End User Agreements
entered into by CKK or any Distributor and End Users prior to such termination
shall remain in full force and effect, enforceable in accordance with their
terms; PROVIDED, HOWEVER, that CKK and its Distributors shall assign to Cadence
or to a third Person designated by Cadence all of CKK's and its Distributors'
rights in any and all End User Agreements. CKK and its Distributors shall fully
cooperate with Cadence and shall take all steps and execute any and all
documents as may be necessary or convenient to promptly effect such assignment,
and upon assignment Cadence shall assume CKK's and its Distributors' rights and
obligations thereunder.
23.
<PAGE>
21.3 RETURN OF MATERIALS. Upon termination of this Agreement, CKK and
its Distributors shall promptly complete all installation and related services
in progress. Within ten (10) days thereafter, CKK and its Distributors shall
return to Cadence all Products then in its possession, and all promotional
materials and other literature relating to the Products in CKK's and its
Distributors' possession and any and all Confidential Information which is in
written, recorded or other tangible form. CKK and its Distributors hereby
expressly waive and agree not to assert any right of detention whatsoever with
respect to such Products, promotional materials, literature and Confidential
Information.
22. PERFORMANCE ISSUES.
22.1 BACKGROUND. The parties acknowledge that certain
performance-related issues may arise during the course of their performance
under this Agreement, which issues are detailed below in Section 22.2
("Target Issues") and Section 22.3 ("Product Issues"). Notwithstanding
anything to the contrary contained in this Agreement, including in Section
20.4 ("Termination for Material Breach"), the parties agree that in the event
the circumstances described in either of Sections 22.2 ("Target Issues") or
22.3 ("Product Issues") arise, the parties shall treat such issues in the
manner prescribed in such Sections.
22.2 TARGET ISSUES. CKK shall receive [*] and other [*] for its [*]
pursuant to the Product, Bookings and other discount and remuneration
procedures set forth in Exhibit C ("Pricing Schedule"). Promptly after [*]
hereunder, the parties shall meet and review the performance of CKK
hereunder, including (i) [*] and (ii) [*] achieved in a [*] was done in such
as way as to [*] on a [*] while [*] agreed upon by the parties. In the event
CKK fails for [*] to achieve the [*] Cadence shall have the right to [*] in
accordance with [*] that [*] hereby [*].
22.3 PRODUCT ISSUES. [*] of [*] that [*] are [*] when [*] shall [*]
and [*]. [*] shall [*] and shall [*]. [*] in accordance with [*] that [*]
that it [*] by reason of [*]. In the event [*] but [*] shall not [*].
23. GENERAL PROVISIONS.
23.1 INDEPENDENT CONTRACTORS. The relationship between Cadence and
CKK established by this Agreement is that of independent contractors, and
nothing in this Agreement shall be construed to constitute the parties as
principal and agent, employer and employee, partners, joint venturers,
co-owners, agents or otherwise as participants in a joint undertaking. The
parties understand and agree that, except as specifically provided for in
this Agreement, Cadence does not grant CKK the power or authority to make or
give any agreement, statement, representation, warranty or other commitment
on behalf of Cadence or Cadence US, or to enter into any contract or
otherwise incur any liability or obligation, express or implied, on behalf of
Cadence or Cadence US, or to transfer, release or waive any right, title or
interest of Cadence or Cadence US.
23.2 WAIVER. The waiver by either party of a breach or default in any
of the provisions of this Agreement by the other party shall not be construed as
a waiver of any succeeding breach of the same or other provisions; nor shall any
delay or omission on the part of
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
24.
<PAGE>
either party to exercise or avail itself of any right, power or privilege that
it has or may have hereunder operate as a waiver of any breach or default by the
other party.
23.3 NOTICES. Unless otherwise specifically provided, all notices
required or permitted by this Agreement shall be in writing and in English and
may be delivered personally, or may be sent by cable, telex, telefax, or air
mail, return receipt requested, sent the addresses first above shown. Any
notice shall be deemed to have been received as follows: (1) personal delivery,
upon receipt; (2) cable, telex and telefax, twenty-four hours after
transmission; (3) registered airmail, ten days after delivery to the postal
authorities by the party serving notice.
23.4 FORCE MAJEURE. Neither party shall be liable to the other party
for any delay or omission in the performance of any obligation under this
Agreement, other than an obligation to pay money, where the delay or omission is
due to any cause or condition beyond the reasonable control of the party obliged
to perform, including, but not limited to, strikes or other labor difficulties,
acts of God, acts of government (including the inability to obtain a validated
export license under the Export Administration Regulations), war, riots,
embargoes, communication failures or inability to obtain supplies.
23.5 SURVIVAL. Notwithstanding anything else in this Agreement, the
terms of Sections 1 ("Definitions"), 12 ("Nondisclosure of Confidential
Information"), 13 ("Products Provided "AS-IS"), 14 ("Limitation on Damages"), 15
("Indemnification"), 18 ("Dispute Resolution"), 19 ("Arbitration"), 21 ("Effect
of Termination"), and 22 ("General Provisions") shall survive termination or
expiration of this Agreement.
23.6 EXPENSES. Each party shall bear its respective expenses incurred
in completing its responsibilities under this Agreement.
23.7 SECTION HEADINGS. The section headings appearing in this
Agreement are inserted only as a matter of convenience and in no way define,
limit, construe or describe the scope or intent of any such section nor in any
way affect this Agreement.
23.8 PARTIES REPRESENTED BY COUNSEL. This Agreement has been
negotiated between unrelated parties who are sophisticated and knowledgeable in
the matters contained in this Agreement and who have acted in their own self
interest. In addition, each party has been represented by legal counsel. The
provisions of this Agreement shall be interpreted in a reasonable manner to
effect the purpose of the parties, and this Agreement shall not be interpreted
or construed against any party to this Agreement because that party of any
attorney or Representative for that party drafted this Agreement. Or
participated in the drafting of this Agreement.
23.9 AMENDMENT. No change, modification or amendment of this
Agreement shall be valid or binding on the parties unless such change or
modification shall be in writing signed by the party or parties against whom
the same is sought to be enforced.
23.10 REMEDIES CUMULATIVE. Except as otherwise provided herein, the
remedies of the parties under this Agreement are cumulative and shall not
exclude any other remedies to which the party may be lawfully entitled.
25.
<PAGE>
23.11 FURTHER ASSURANCES. Each party hereby covenants and agrees that
it shall execute and deliver such deeds and other documents as may be required
to implement any of the provisions of this Agreement.
23.12 NUMBER AND GENDER. Whenever required by the context, the
singular number shall include the plural, the plural number shall include the
singular, and the gender of any pronoun shall include all genders.
23.13 COUNTERPARTS. This Agreement may be executed in counterparts
and, upon delivery of counterparts which together show the execution by both
parties hereto, shall constitute one agreement which shall inure to the benefit
of and be binding upon the parties hereto.
23.14 COMPUTATION OF TIME. Whenever the last day for the exercise of
any privilege or the discharge of any duty hereunder shall fall on a Saturday,
Sunday or any public or legal holiday, whether local or national, the person
having such privilege or duty shall have until 5:00 p.m. (California Pacific
Time) on the next succeeding business day to exercise such privilege, or to
discharge such duty.
23.15 SEVERABILITY. To the extent that any law, statute, treaty or
regulation by its terms as determined by a court, tribunal or other
governmental authority of competent jurisdiction, is in conflict with the
terms of this Agreement, the conflicting terms of this Agreement shall be
superseded only to the extent necessary by the terms required by such law,
statute, treaty or regulation. If any provision of this Agreement shall be
otherwise unlawful, void, or for any reason unenforceable, then that
provision shall be enforced to the maximum extent permissible so as to effect
the intent of the parties. In either case, the remainder of this Agreement
shall continue in full force and effect.
23.16 GOVERNING LAW. This Agreement shall be governed by the laws of
the United States of America and the State of California, United States of
America, without giving effect to conflicts of laws principles.
23.17 ENTIRE AGREEMENT. This Agreement constitutes the entire
agreement between the parties with respect to the subject matter hereof and
supersedes all prior agreements between the parties, whether written or oral,
relating to the same subject matter. No modification, amendments or
supplements to this Agreement shall be effective for any purpose unless in
writing, signed by each party. Approvals or consents hereunder of a party
shall also be in writing.
26.
<PAGE>
IN WITNESS WHEREOF, the parties have executed this Agreement as of the date
first shown above.
CADENCE DESIGN SYSTEMS K.K. CADENCE DESIGN SYSTEM (IRELAND), LTD.
By: /s/ H. Raymond Bingham By: /s/ Michael Greene
-------------------------- -----------------------------
Name: H. Raymond Bingham Name: Michael Greene
-------------------------- -----------------------------
Title: Director Title: Director
------------------------ ---------------------------
Date: May 2, 1997 Date: April 28, 1997
------------------------ ----------------------------
Cadence Design Systems (Japan) B.V.
By: /s/ Mark White
--------------------------
Name: Mark White
--------------------------
Title: Director
--------------------------
Date: April 28, 1997
--------------------------
27.
<PAGE>
Products in Japan, and CKK has appointed Innotech to act as a Distributor in
accordance with the terms hereof, Cadence and CKK have asked Innotech to review
this Agreement, including the obligations imposed on Distributors herein.
Innotech acknowledges that it has reviewed this Agreement and it agrees that it
will enter into a distribution agreement with CKK which is consistent with the
terms hereof.
INNOTECH CORPORATION
By:
--------------------------
Name:
--------------------------
Title:
--------------------------
Date:
--------------------------
28.
<PAGE>
EXHIBIT A
APPROVED END USER AGREEMENT
<PAGE>
EXHIBIT B
PRODUCTS AND PRICES
Cadence 97-A Japan Software & Services Price Book, dated March, 1997, is
hereby incorporated herein by reference.
<PAGE>
EXHIBIT C
PRICING SCHEDULE
GENERAL. The purpose of this Schedule is to align the objectives of CKK and its
distributors with the revenue and bookings goals of Cadence.
PRICING DISCRETION [*] and its [*] authorized to [*] and [*] without [*] in
the following cases:
[*] with [*].
[*] including [*] must be [*].
A. SUMMARY OF [*] PROCEDURES.
1. [*] AND [*].
(a) GENERAL. During the [*] during a [*] purchases products at [*]
(i) [*] and
(ii) [*]
[*] equals [*] for the period from the [*] for the period from [*] through [*]:
and [*] for the period from [*] through [*].
The total of [*] in each [*].
(b) RECONCILIATION. After the [*] the [*] shall be reconciled with
[*] as follows:
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
<PAGE>
Exhibit C (CONTINUED)
(i) [*]. The [*] rate shall be determined by the extent to
which [*] its [*] pursuant to the following table:
[*] [*]
Above[*] [*]
[*] Target Rate [*]
[*] Target Rate [*]
[*] Target Rate [*]
[*] Target Rate [*]
[*] Target Rate [*]
[*]
Notwithstanding the foregoing, [*] for [*] the [*] shall be [*] to [*] for
such reasons.
The [*] shall be [*] of [*].
(ii) [*]. [*] shall be the [*] the [*].
The [*](i) [*] and (ii) [*] equals [*].
(c) [*].
(i) If [*] is [*] the [*].
(ii) If [*] is [*] the [*].
All such [*] shall be [*].
2. [*] AND [*].
(a) [*]. [*] shall be [*] as described in [*]. [*] shall be [*]
as described in [*].
(b) [*]. [*] for [*] and [*] shall be [*] as described in [*].
(c) [*]. [*]will [*] as described in [*].
B. [*] and [*] and [*].
1. [*].
For each [*] by [*] during a [*] based on the following formula:
[*]
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
2.
<PAGE>
Exhibit C (CONTINUED)
[*]
[*]
[*] equals [*] for the period from the [*] for the period from [*] through [*];
and [*] for the period from [*] through the [*]; and
[*] is the applicable [*] at the [*] shall be the [*] for [*].
(a) CALCULATION OF [*] USED FOR [*] BASED ON [*].
At the end of each [*], [*] will be [*] to determine the [*] pursuant to
the procedures set forth in [*]. For example during the [*] when the [*] shall
be determined by [*] pursuant to the following table:
[*] [*]
Above [*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*]
For [*] shall be [*].
2. [*] AND [*].
(a) [*].
With respect to [*] based on the following formula:
[*]
[*]
[*] and
[*] equals [*] for the period from [*] for the
period from [*]; and [*] for the period [*]
(b) [*].
[*] based on the following table:
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
3.
<PAGE>
Exhibit C (CONTINUED)
[*] [*]
[*] [*]
[*]
If [*] are [*].
If [*] are [*].
[*]shall be [*].
3. [*] AND [*]
[*] shall [*]. As specified above, [*] and [*] will be determined as
follows:
A. A [*] is a [*] with [*] may
[*] or [*]. On transactions in which [*]
based on [*]. On transactions in which [*] and
[*] as defined in [*]. [*] and other
[*] in accordance with [*].
B. A [*] or [*] is a [*]. It may also
be a [*] as described [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
The [*] is [*] then [*]. Based on the
[*] for a particular deal, the [*].
[*] described in [*] will [*] and
[*] as defined in [*]. [*] will be
[*] in accordance with [*] however, the
[*]will be determined [*].
4. [*].
[*] will be [*] resulting from [*] of
[*] or greater, such [*]will be [*] and
[*] as follows:
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] [*] [*] [*]
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
4.
<PAGE>
Exhibit C (CONTINUED)
[*] will [*].
[*] will be [*] as [*] within [*] from the [*].
5. SPECIAL PROGRAMS. The Parties will agree on [*] for special
programs [*].
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
5.
<PAGE>
EXHIBIT D
TRADEMARKS AND TRADE NAMES
BITGRADE CONVERGENCE PACKAGER-XL
BONES CORNERSTONE PEARL
BONES DESIGNER DESIGN FACTORY PIC DESIGNER
BONES PLANNET DESIGN FRAMEWORK II PLD DESIGNER
DRACULA DIVA PRANCE
SPW DL PLACE & ROUTE PRECICE
SYSTEM
VERILOG PREVAIL
STARTGRADE DSPARTNERS QPLACE
ALLEGRO ENVISION REDWOD
ALTA GROUP FLEXCHIP REDWOOD DESIGN
AUTOMATION
ANALOG ARTIST FPGA DESIGNER
BOARDQUEST GATE ENSEMBLE RESOLVE
BONES CL.42 IMS SCALDSYSTEM
(STYLIZED)
BONES CL.9 INCA SIG-XPLORER
BLOCK ENSEMBLE INQUERY SIGNAL PROCESSING
WORKSYSTEM
CADENCE LAYDE
CADENCE & DESIGN LEAPFROG SILICON EXPRESS
CELL ENSEMBLE LOGIC MASTER SILICON ENSEMBLE
CELL3 ENSEMBLE LOGIC WORKBENCH SILICON SYNTHESIS
CHECKPLUS MASKAP SILICONQUEST
COMPOSER MODULEMAKER SIMVISION
1.
<PAGE>
EXHIBIT D (CONTINUED)
CONCEPT MSP SKILL
CONCICE NC-VERILOG SKILL++
CONNECTIONS OPENBOOK SMARTBLOCKS
SMARTGE CADENCE & DEVICE
SMARTPATH VERICAD
SOURCELIN BONES (STYLIZED)
SPECTRE CADENCE DESIGN
SYSTEMS, INC.
SYNERGY
TELOS VENTURE PARTNERS VERITIME
THERMAX
TRACEGARD
VAMPIRE
VERIFAULT-XL
VHDL
VIRTUOSO
VISUAL ARCHITECT
WARPROUTE
2.
<PAGE>
EXHIBIT E
EXCLUDED PRODUCTS AND SERVICES
COMPANY: [*]
CATEGORY:
[*]
PRODUCT VENDOR NAME
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*]
PRODUCT VENDOR NAME
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
1.
<PAGE>
Exhibit E (CONTINUED)
PRODUCT VENDOR NAME
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*]
PRODUCT VENDOR NAME
[*] [*]
[*] [*]
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
2.
<PAGE>
Exhibit E (CONTINUED)
PRODUCT VENDOR NAME
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
COMPANY: [*]
CATEGORY:
[*]
PRODUCT VENDOR NAME
[*] [*]
[*] [*]
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
3.
<PAGE>
Exhibit E (CONTINUED)
PRODUCT VENDOR NAME
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*]
[*]
PRODUCT VENDOR NAME
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*]
PRODUCT VENDOR NAME
[*] [*]
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
4.
<PAGE>
Exhibit E (CONTINUED)
PRODUCT VENDOR NAME
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
COMPANY: [*]
CATEGORY:
[*]
[*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*]
[*]
[*]
[*] [*]
[*] [*]
[*] [*]
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
5.
<PAGE>
Exhibit E (CONTINUED)
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*] [*]
[*]
[*]
[*]
[*]
[*]
[*] = CERTAIN INFORMATION ON THIS PAGE HAS BEEN OMITTED AND FILED SEPARATELY
WITH THE COMMISSION. CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT
TO THE OMITTED PORTIONS.
6.
<PAGE>
EXHIBIT F
EXISTING THIRD PARTY RIGHTS
1. SC Hightech Corporation to distribute HLDS products
2. Sony/Tectronix Corporation to distribute ALTA products
<PAGE>
EXHIBIT A TO DISTRIBUTION AGREEMENT
AGREEMENT NO. ________
SOFTWARE LICENSE AGREEMENT
STANDARD TERMS AND CONDITIONS
THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") is made _____ day of ________,
19____, between Cadence Design Systems, Inc., ("CADENCE") and the
undersigned, ("CUSTOMER"). Customer desires by this Agreement to obtain from
Cadence licenses to use certain Licensed Programs and related Documentation
(as defined below) and establish the terms and conditions of all such
transactions between them. Therefore, Cadence and Customer agree as follows:
- -----------------------------------------------------------------------------
1. DEFINITIONS. The following definitions apply herein:
a) "PRODUCT QUOTATION" or "QUOTATION" means a written quote from Cadence to
Customer identifying the Licensed Programs, quantity, charges, and other
information relevant to a specific transaction which Cadence is quoting to
Customer.
b) "LICENSED PROGRAM" means each executable software program and any
updated, improved or otherwise modified versions thereof furnished by Cadence
pursuant to a Product Quotation or an order from Customer solely for
Customer's internal purposes only; it may include software licensed by
Cadence from third parties.
c) "LICENSED USE" herein shall mean copying, running, or otherwise executing
any portion of the Licensed Program including loading data into or
displaying, viewing, or extracting output results therefrom for the purpose
of assisting Customer in the design, test, or manufacture of electronic
elements, circuits, or systems.
d) "DESIGNATED EQUIPMENT" means a computer or workstation as identified by
manufacturer, make, model, serial number, and host I.D. number, which has the
configuration, capacity, operating software and requisite applications
prescribed in the Licensed Program Documentation as necessary or desirable
for the Licensed Program's operation.
e) "DOCUMENTATION" means any and all information, written or otherwise,
provided to Customer by Cadence describing the Licensed Program, its
operation and matters related to its Licensed Use and any updated, improved
or modified version(s) of such materials, in published written material, on
magnetic media or communicated by electronic means.
f) "DESIGNATED SITE" means the specific address of Customer's facility
consisting of one or more buildings within a radius of one mile of where the
Designated Equipment upon which the Licensed Programs are installed.
2. LICENSE GRANT.
Cadence hereby grants and Customer accepts, subject to this Agreement, a
99-year, non-transferable, non-exclusive, fully paid, personal, limited
license to internally use each Licensed Program on the Designated Equipment
only at the Designated Site by a single user at a time (unless a multi-user
license is specified in the quotation) and to utilize the Documentation at
the Designated Site as is reasonably necessary for Customer's Licensed Use of
the Licensed Program. If the Licensed Program is installed on a computer in a
network within the Designated Site, it may be used only on one unit of
Designated Equipment at a time. Customer shall not sublicense, modify, or
permit third parties to use or otherwise access the Licensed Program or the
Documentation. Customer shall not receive, use, nor have access to sourcecode
relating to any Licensed Program.
3. LOCATION AND TRANSFER.
Each license granted hereunder authorizes only Customer's Licensed Use of the
Licensed Program(s) on specifically identified Designated Equipment at the
specifically identified Designated Site. The Licensed Program may only be
moved from the Designated Site or the Designated Equipment if the Designated
Equipment malfunctions and only with Cadence's prior written consent.
Customer will immediately return Cadence's Rehost Certificate when the
Licensed Program is moved from either the previously identified Designated
Equipment or Designated Site and completely remove the Licensed Program from
such equipment.
4. COPIES BY CUSTOMER.
Customer may make a reasonable number of copies of a Licensed Program only
for archival purposes and only for use as back-ups when the Licensed Program
is not operational. All legends, trademarks, tradenames, copyright legends
and other identifications must also be copied when copying the Licensed
Program. Documentation may not be copied except for a reasonable number of
printed copies produced by Customer for internal use only from Documentation
provided in electronic form. At Cadence's request, Customer will provide
Cadence with a listing of the number of copies currently in possession or
control by Customer.
5. TERM AND TERMINATION.
(a) This Agreement is intended to commence at the time of shipment of the
Licensed Programs.
(b) This Agreement hereunder may be terminated by Cadence:
(i) if Customer defaults in the timely payment of any monies due Cadence;
or
(ii) if Customer breaches any Confidentiality provisions herein, or
(iii) in the event of a material breach by Customer of any provision of
this Agreement where Customer fails to correct such breach within 30 days of
written notice, or
(iv) upon the insolvency, bankruptcy, reorganization, or assignment for
the benefit of creditors of Customer.
Within 30 days after the date of termination of any License granted under
this License Agreement, Customer shall furnish to Cadence written notice
certifying that the original and all copies including partial copies of the
corresponding Licensed Program, any Documentation, and any other materials
received from Cadence have been returned or destroyed. Customer shall make
prompt payment in full to Cadence for all amounts outstanding as of the date
of termination.
6. LIMITED WARRANTY.
(a) Cadence warrants for thirty (30) days after shipment that the recording
media by which a Licensed Program is furnished is free of manufacturing
defects and damage provided that the media has been properly installed by
Customer on the Designated Equipment. Cadence does not warrant that any
Licensed Program will meet Customer's requirements nor will be error free. As
Customer's sole and exclusive remedy for breach of the warranty herein,
Cadence will provide a suitable replacement media containing the Licensed
Program.
(b) EXCEPT AS PROVIDED ABOVE, CADENCE MAKES NO WARRANTY, EXPRESS OR IMPLIED,
AND DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE LICENSED PROGRAM OR
DOCUMENTATION, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
7. LIMITATION OF LIABILITY. CADENCE'S CUMULATIVE LIABILITY UNDER THIS
AGREEMENT FOR ALL CAUSES OF ACTION SHALL BE LIMITED TO AND NOT EXCEED THE
LICENSE FEE PAID BY CUSTOMER FOR THE LICENSED PROGRAMS REGARDLESS OF WHETHER
CADENCE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR ANY REMEDY SET
FORTH HEREIN FAILS OF ITS ESSENTIAL PURPOSE OR OTHERWISE. CADENCE SHALL NOT
BE LIABLE FOR COSTS OF
1
<PAGE>
PROCUREMENT OF SUBSTITUTES, LOSS OF PROFITS, INTERRUPTION OF BUSINESS, OR FOR
ANY OTHER SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, HOWEVER CAUSED,
WHETHER FOR BREACH OF WARRANTY, CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY
OR OTHERWISE. CUSTOMER ACKNOWLEDGES THAT THE LICENSE FEE REFLECTS THIS
ALLOCATION OF RISK. IN NO EVENT SHALL CADENCE'S LIABILITY FOR PROPERTY DAMAGE
EXCEED THE GREATER OF $50,000, OR THE LICENSE FEE PAID BY CUSTOMER FOR THE
LICENSED PROGRAM THAT CAUSED SUCH DAMAGE. CUSTOMER AGREES IT WILL TAKE NO
LEGAL ACTION AGAINST CADENCE'S THIRD PARTY SOFTWARE SUPPLIERS.
8. FEES AND TERMS OF PAYMENT.
Cadence's price list in effect at receipt of Customer's order shall apply
unless otherwise provided in a Product Quotation provided to Customer by
Cadence. Payment of the total amount invoiced is due thirty (30) days of the
latter of shipment or invoice date.
9. TAXES.
Customer will pay or reimburse all federal, state and local taxes (exclusive
of taxes on Cadence's net income), duties and assessments, if any due,
arising on or measured by amounts payable to Cadence under this Agreement.
10. SHIPMENT.
Delivery is to be made F.O.B. Customer's dock and shipping charges, including
insurance, shall be paid by Cadence.
11. MAINTENANCE, INSTALLATION AND TRAINING.
License Program charges do not include maintenance, installation or training.
Separate maintenance services are available under the terms of Cadence's
Maintenance Services Agreement which Cadence recommends. Installation
services and training, where available from Cadence, may also be ordered
under separate agreement at Cadence's then current rates. Any installation
assistance provided by Cadence hereunder shall be without liability or risk
to Cadence.
12. PROPRIETARY RIGHTS INDEMNITY.
If any Licensed Program supplied hereunder becomes the subject of a claim of
infringement of a U.S. patent or copyright, Cadence will indemnify Customer
against such claim provided that Customer gives Cadence prompt written notice
of such claim, allows Cadence to direct the defense and settlement of the
claim, and cooperates with Cadence as necessary for defense and settlement of
the claim. If an injunction is obtained against Customer's use of a Licensed
Program, or if in Cadence's opinion such an injunction is likely to be
obtained, Cadence shall have the right to obtain for Customer the right to
continue using the Licensed Program, replace or modify the Licensed Program
so that it becomes non-infringing, or terminate the license granted hereunder
to such Licensed Program with refund to Customer of the license fee paid for
such Licensed Program, (less a reasonable charge for the period during
which Customer has had availability of such Licensed Program for use).
Cadence will have no liability for any infringement claim to the extent it is
based on modification of a Licensed Program other than by Cadence, with or
without authorization; or results from failure of Customer to utilize an
updated version of a Licensed Program; or results from compliance by Cadence
with designs, plans or specifications furnished by Customer. THE FOREGOING
STATES CADENCE'S ENTIRE LIABILITY AND CUSTOMER'S EXCLUSIVE REMEDIES FOR
PROPRIETARY RIGHTS INFRINGEMENT.
13. PROTECTION OF LICENSED MATERIALS.
The Licensed Program and Documentation are the confidential and proprietary
property of Cadence or third parties from whom Cadence has obtained rights.
Customer receives no rights to and will not sell, assign, lease, market,
transfer, encumber, or otherwise suffer to exist any lien or security
interest (other than those of Cadence) on, nor allow any third person, firm,
corporation, or other entity to copy, reproduce or disclose in whole or in
part in any manner the Licensed Program or Documentation. Customer receives
no rights to and shall not create nor attempt to create by reverse
engineering, reverse assembly, reverse compiling any part of the sourcecode
from any such Licensed Program or Documentation or permit any third party to
do so. Customer shall take all reasonable steps, both during and after the
term of this Agreement, to insure that no unauthorized persons shall have
access to the Licensed Program or Documentation and that no unauthorized
copy, in whole or in part, in any form shall be made. Customer's obligation
under this section shall survive any termination of any other provision of
this Agreement.
14. EXPORT.
The license granted hereunder does not permit export of the Licensed Programs
or Documentation. In addition, Customer warrants that Customer shall comply
with all U.S. laws regarding export and all other necessary approval and
licensing requirements of the U.S. Dept. of Commerce and other agencies or
departments of the U.S. Government.
15. ASSIGNMENT.
Neither party shall assign this Agreement, or delegate, or subcontract any
portion of its rights, duties, or obligations under this Agreement without
the prior written consent of the other party, which consent will not be
unreasonably withheld or delayed. The party's consent to an assignment shall
not be deemed to be a consent to any subsequent assignment. The following
shall be deemed an assignment: (1) any dissolution, merger, consolidation, or
other reorganization of or affecting the party, whether or not the party is
the surviving corporation, and (2) the sale or transfer, whether is one or a
series of transactions, of stock possessing more than fifty percent (50%) of
the total combined voting power of all classes of the party's capital stock
issued, outstanding and entitled to vote for the election of the directors.
16. NOTICES.
Notices to Customer shall be sent to the address specified beneath Customer's
signature and to Cadence, to 555 River Oaks Parkway, San Jose, California
95134, Attn: Legal Department, or such new address as a party specifies to
the other in writing.
17. ARBITRATION.
Any unresolved dispute arising pursuant to this Agreement shall be settled by
arbitration before one arbitrator for disputes of under $50,000, otherwise
before three arbitrators, provided that nothing in this Section shall
restrict either party from applying for emergency relief pending final
determination of a claim by arbitration or restrict Cadence from bringing
action against Customer for infringement of any of Cadence's intellectual
property rights hereunder. All arbitration shall be conducted in San Jose,
California in accordance with the rules and regulations of the American
Arbitration Association. Each party shall pay its own expenses associated
with such arbitration, including 50% of the expenses of the neutral
arbitrator(s). The judgment of the arbitrators shall be binding and entered
in any court having jurisdiction thereof.
18. GENERAL.
This Agreement is governed by the laws of the State of California, U.S.A.,
without reference to the principles of conflict of laws. The original and
official version of the Agreement has been written in the English language,
each party specifically waives any right it may have under the laws and
regulations of any country or jurisdiction to have this Agreement written in
any other language than English. This Agreement is the complete and exclusive
statement of the agreement between the parties and supersedes all proposals,
oral or written, and all other communications between the parties relating to
the subject matter of this Agreement. Any terms and conditions of any
purchase order or other instrument
2
<PAGE>
issued by Customer in connection with this Agreement which are in addition
to, inconsistent with or different from the terms and conditions of this
Agreement shall be of no force or effect. This Agreement may be modified only
by a written instrument duly executed by authorized representatives of the
parties. Any waiver by either party of any condition, part, term, or
provision of this Agreement shall not be construed as a waiver of any other
condition, part, term, or provision or a waiver of any future event or
circumstance. If any provision of this Agreement is held invalid or
unenforceable, the remainder of the Agreement shall continue in full force
and effect.
19. GOVERNMENT USE.
If Customer is a part of the U.S. Government, Customer agrees that the
Licensed Program and Documentation are classified as "Commercial Computer
Software" and "Commercial Computer Software Documentation." Pursuant to 48
CFR 12.00 et seq. and 48 CFR Section 227.7202-1 - Section 227.7202-4, the
Government acquires only those rights as are set forth herein.
- End of Terms -
- ---------------------------------------------------------------------------
This Agreement shall be binding on the parties only after acceptance at
Cadence's offices in California and signed by an Officer thereof.
CUSTOMER:____________________________ CADENCE DESIGN SYSTEMS, INC.
(Print Name)
By: _________________________________ By: ______________________________
(Signature) (Signature)
_____________________________________ __________________________________
(Name) (Name)
_____________________________________ __________________________________
(Title) (Title)
_____________________________________ __________________________________
(Date) (Date)
ADDRESS:
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
(City, State, Zip Code, Country)
3
<PAGE>
[Cadence Logo]
EXHIBIT A TO DISTRIBUTION AGREEMENT
AGREEMENT NO. ________
SOFTWARE LICENSE AGREEMENT
STANDARD TERMS AND CONDITIONS
THIS SOFTWARE LICENSE AGREEMENT ("AGREEMENT") is made _____ day of ________,
19____, between Cadence Design Systems, Inc., ("CADENCE") and the
undersigned, ("CUSTOMER"). Customer desires by this Agreement to obtain from
Cadence licenses to use certain Licensed Programs and related Documentation
(as defined below) and establish the terms and conditions of all such
transactions between them. Therefore, Cadence and Customer agree as follows:
- -----------------------------------------------------------------------------
1. DEFINITIONS. The following definitions apply herein:
a) "PRODUCT QUOTATION" or "QUOTATION" means a written quote from Cadence to
Customer identifying the Licensed Programs, quantity, charges, and other
information relevant to a specific transaction which Cadence is quoting to
Customer.
b) "LICENSED PROGRAM" means each executable software program and any
updated, improved or otherwise modified versions thereof furnished by Cadence
pursuant to a Product Quotation or an order from Customer solely for
Customer's internal purposes only; it may include software licensed by
Cadence from third parties.
c) "LICENSED USE" herein shall mean copying, running, or otherwise executing
any portion of the Licensed Program including loading data into or
displaying, viewing, or extracting output results therefrom for the purpose
of assisting Customer in the design, test, or manufacture of electronic
elements, circuits, or systems.
d) "DESIGNATED EQUIPMENT" means a computer or workstation as identified by
manufacturer, make, model, serial number, and host I.D. number, which has the
configuration, capacity, operating software and requisite applications
prescribed in the Licensed Program Documentation as necessary or desirable
for the Licensed Program's operation.
e) "DOCUMENTATION" means any and all information, written or otherwise,
provided to Customer by Cadence describing the Licensed Program, its
operation and matters related to its Licensed Use and any updated, improved
or modified version(s) of such materials, in published written material, on
magnetic media or communicated by electronic means.
f) "DESIGNATED SITE" means the specific address of Customer's facility
consisting of one or more buildings within a radius of one mile of where the
Designated Equipment upon which the Licensed Programs are installed.
2. LICENSE GRANT.
Cadence hereby grants and Customer accepts, subject to this Agreement, a
99-year, non-transferable, non-exclusive, fully paid, personal, limited
license to internally use each Licensed Program on the Designated Equipment
only at the Designated Site by a single user at a time (unless a multi-user
license is specified in the quotation) and to utilize the Documentation at
the Designated Site as is reasonably necessary for Customer's Licensed Use of
the Licensed Program. If the Licensed Program is installed on a computer in a
network within the Designated Site, it may be used only on one unit of
Designated Equipment at a time. Customer shall not sublicense, modify, or
permit third parties to use or otherwise access the Licensed Program or the
Documentation. Customer shall not receive, use, nor have access to sourcecode
relating to any Licensed Program.
3. LOCATION AND TRANSFER.
Each license granted hereunder authorizes only Customer's Licensed Use of the
Licensed Program(s) on specifically identified Designated Equipment at the
specifically identified Designated Site. The Licensed Program may only be
moved from the Designated Site or the Designated Equipment if the Designated
Equipment malfunctions and only with Cadence's prior written consent.
Customer will immediately return Cadence's Rehost Certificate when the
Licensed Program is moved from either the previously identified Designated
Equipment or Designated Site and completely remove the Licensed Program from
such equipment.
4. COPIES BY CUSTOMER.
Customer may make a reasonable number of copies of a Licensed Program only
for archival purposes and only for use as back-ups when the Licensed Program
is not operational. All legends, trademarks, tradenames, copyright legends
and other identifications must also be copied when copying the Licensed
Program. Documentation may not be copied except for a reasonable number of
printed copies produced by Customer for internal use only from Documentation
provided in electronic form. At Cadence's request, Customer will provide
Cadence with a listing of the number of copies currently in possession or
control by Customer.
5. TERM AND TERMINATION.
(a) This Agreement is intended to commence at the time of shipment of the
Licensed Programs.
(b) This Agreement hereunder may be terminated by Cadence:
(i) if Customer defaults in the timely payment of any monies due Cadence;
or
(ii) if Customer breaches any Confidentiality provisions herein, or
(iii) in the event of a material breach by Customer of any provision of
this Agreement where Customer fails to correct such breach within 30 days of
written notice, or
(iv) upon the insolvency, bankruptcy, reorganization, or assignment for
the benefit of creditors of Customer.
Within 30 days after the date of termination of any License granted under
this License Agreement, Customer shall furnish to Cadence written notice
certifying that the original and all copies including partial copies of the
corresponding Licensed Program, any Documentation, and any other materials
received from Cadence have been returned or destroyed. Customer shall make
prompt payment in full to Cadence for all amounts outstanding as of the date
of termination.
6. LIMITED WARRANTY.
(a) Cadence warrants for thirty (30) days after shipment that the recording
media by which a Licensed Program is furnished is free of manufacturing
defects and damage provided that the media has been properly installed by
Customer on the Designated Equipment. Cadence does not warrant that any
Licensed Program will meet Customer's requirements nor will be error free. As
Customer's sole and exclusive remedy for breach of the warranty herein,
Cadence will provide a suitable replacement media containing the Licensed
Program.
(b) EXCEPT AS PROVIDED ABOVE, CADENCE MAKES NO WARRANTY, EXPRESS OR IMPLIED,
AND DISCLAIMS ANY WARRANTIES WITH RESPECT TO THE LICENSED PROGRAM OR
DOCUMENTATION, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
7. LIMITATION OF LIABILITY. CADENCE'S CUMULATIVE LIABILITY UNDER THIS
AGREEMENT FOR ALL CAUSES OF ACTION SHALL BE LIMITED TO AND NOT EXCEED THE
LICENSE FEE PAID BY CUSTOMER FOR THE LICENSED PROGRAMS REGARDLESS OF WHETHER
CADENCE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR ANY REMEDY SET
FORTH HEREIN FAILS OF ITS ESSENTIAL PURPOSE OR OTHERWISE. CADENCE SHALL NOT
BE LIABLE FOR COSTS OF
1
<PAGE>
[Cadence Logo]
PROCUREMENT OF SUBSTITUTES, LOSS OF PROFITS, INTERRUPTION OF BUSINESS, OR FOR
ANY OTHER SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, HOWEVER CAUSED,
WHETHER FOR BREACH OF WARRANTY, CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY
OR OTHERWISE. CUSTOMER ACKNOWLEDGES THAT THE LICENSE FEE REFLECTS THIS
ALLOCATION OF RISK. IN NO EVENT SHALL CADENCE'S LIABILITY FOR PROPERTY DAMAGE
EXCEED THE GREATER OF $50,000, OR THE LICENSE FEE PAID BY CUSTOMER FOR THE
LICENSED PROGRAM THAT CAUSED SUCH DAMAGE. CUSTOMER AGREES IT WILL TAKE NO
LEGAL ACTION AGAINST CADENCE'S THIRD PARTY SOFTWARE SUPPLIERS.
8. FEES AND TERMS OF PAYMENT.
Cadence's price list in effect at receipt of Customer's order shall apply
unless otherwise provided in a Product Quotation provided to Customer by
Cadence. Payment of the total amount invoiced is due thirty (30) days of the
latter of shipment or invoice date.
9. TAXES.
Customer will pay or reimburse all federal, state and local taxes (exclusive
of taxes on Cadence's net income), duties and assessments, if any due,
arising on or measured by amounts payable to Cadence under this Agreement.
10. SHIPMENT.
Delivery is to be made F.O.B. Customer's dock and shipping charges, including
insurance, shall be paid by Cadence.
11. MAINTENANCE, INSTALLATION AND TRAINING.
License Program charges do not include maintenance, installation or training.
Separate maintenance services are available under the terms of Cadence's
Maintenance Services Agreement which Cadence recommends. Installation
services and training, where available from Cadence, may also be ordered
under separate agreement at Cadence's then current rates. Any installation
assistance provided by Cadence hereunder shall be without liability or risk
to Cadence.
12. PROPRIETARY RIGHTS INDEMNITY.
If any Licensed Program supplied hereunder becomes the subject of a claim of
infringement of a U.S. patent or copyright, Cadence will indemnify Customer
against such claim provided that Customer gives Cadence prompt written notice
of such claim, allows Cadence to direct the defense and settlement of the
claim, and cooperates with Cadence as necessary for defense and settlement of
the claim. If an injunction is obtained against Customer's use of a Licensed
Program, or if in Cadence's opinion such an injunction is likely to be
obtained, Cadence shall have the right to obtain for Customer the right to
continue using the Licensed Program, replace or modify the Licensed Program
so that it becomes non-infringing, or terminate the license granted hereunder
to such Licensed Program with refund to Customer of the license fee paid for
such Licensed Program, (less a reasonable charge for the period during
which Customer has had availability of such Licensed Program for use).
Cadence will have no liability for any infringement claim to the extent it is
based on modification of a Licensed Program other than by Cadence, with or
without authorization; or results from failure of Customer to utilize an
updated version of a Licensed Program; or results from compliance by Cadence
with designs, plans or specifications furnished by Customer. THE FOREGOING
STATES CADENCE'S ENTIRE LIABILITY AND CUSTOMER'S EXCLUSIVE REMEDIES FOR
PROPRIETARY RIGHTS INFRINGEMENT.
13. PROTECTION OF LICENSED MATERIALS.
The Licensed Program and Documentation are the confidential and proprietary
property of Cadence or third parties from whom Cadence has obtained rights.
Customer receives no rights to and will not sell, assign, lease, market,
transfer, encumber, or otherwise suffer to exist any lien or security
interest (other than those of Cadence) on, nor allow any third person, firm,
corporation, or other entity to copy, reproduce or disclose in whole or in
part in any manner the Licensed Program or Documentation. Customer receives
no rights to and shall not create nor attempt to create by reverse
engineering, reverse assembly, reverse compiling any part of the sourcecode
from any such Licensed Program or Documentation or permit any third party to
do so. Customer shall take all reasonable steps, both during and after the
term of this Agreement, to insure that no unauthorized persons shall have
access to the Licensed Program or Documentation and that no unauthorized
copy, in whole or in part, in any form shall be made. Customer's obligation
under this section shall survive any termination of any other provision of
this Agreement.
14. EXPORT.
The license granted hereunder does not permit export of the Licensed Programs
or Documentation. In addition, Customer warrants that Customer shall comply
with all U.S. laws regarding export and all other necessary approval and
licensing requirements of the U.S. Dept. of Commerce and other agencies or
departments of the U.S. Government.
15. ASSIGNMENT.
Neither party shall assign this Agreement, or delegate, or subcontract any
portion of its rights, duties, or obligations under this Agreement without
the prior written consent of the other party, which consent will not be
unreasonably withheld or delayed. The party's consent to an assignment shall
not be deemed to be a consent to any subsequent assignment. The following
shall be deemed an assignment: (1) any dissolution, merger, consolidation, or
other reorganization of or affecting the party, whether or not the party is
the surviving corporation, and (2) the sale or transfer, whether is one or a
series of transactions, of stock possessing more than fifty percent (50%) of
the total combined voting power of all classes of the party's capital stock
issued, outstanding and entitled to vote for the election of the directors.
16. NOTICES.
Notices to Customer shall be sent to the address specified beneath Customer's
signature and to Cadence, to 555 River Oaks Parkway, San Jose, California
95134, Attn: Legal Department, or such new address as a party specifies to
the other in writing.
17. ARBITRATION.
Any unresolved dispute arising pursuant to this Agreement shall be settled by
arbitration before one arbitrator for disputes of under $50,000, otherwise
before three arbitrators, provided that nothing in this Section shall
restrict either party from applying for emergency relief pending final
determination of a claim by arbitration or restrict Cadence from bringing
action against Customer for infringement of any of Cadence's intellectual
property rights hereunder. All arbitration shall be conducted in San Jose,
California in accordance with the rules and regulations of the American
Arbitration Association. Each party shall pay its own expenses associated
with such arbitration, including 50% of the expenses of the neutral
arbitrator(s). The judgment of the arbitrators shall be binding and entered
in any court having jurisdiction thereof.
18. GENERAL.
This Agreement is governed by the laws of the State of California, U.S.A.,
without reference to the principles of conflict of laws. The original and
official version of the Agreement has been written in the English language,
each party specifically waives any right it may have under the laws and
regulations of any country or jurisdiction to have this Agreement written in
any other language than English. This Agreement is the complete and exclusive
statement of the agreement between the parties and supersedes all proposals,
oral or written, and all other communications between the parties relating to
the subject matter of this Agreement. Any terms and conditions of any
purchase order or other instrument
2
<PAGE>
[Cadence Logo]
issued by Customer in connection with this Agreement which are in addition
to, inconsistent with or different from the terms and conditions of this
Agreement shall be of no force or effect. This Agreement may be modified only
by a written instrument duly executed by authorized representatives of the
parties. Any waiver by either party of any condition, part, term, or
provision of this Agreement shall not be construed as a waiver of any other
condition, part, term, or provision or a waiver of any future event or
circumstance. If any provision of this Agreement is held invalid or
unenforceable, the remainder of the Agreement shall continue in full force
and effect.
19. GOVERNMENT USE.
If Customer is a part of the U.S. Government, Customer agrees that the
Licensed Program and Documentation are classified as "Commercial Computer
Software" and "Commercial Computer Software Documentation." Pursuant to 48
CFR 12.00 et seq. and 48 CFR Section 227.7202-1 - Section 227.7202-4, the
Government acquires only those rights as are set forth herein.
- End of Terms -
- ---------------------------------------------------------------------------
This Agreement shall be binding on the parties only after acceptance at
Cadence's offices in California and signed by an Officer thereof.
CUSTOMER:____________________________ CADENCE DESIGN SYSTEMS, INC.
(Print Name)
By: _________________________________ By: ______________________________
(Signature) (Signature)
_____________________________________ __________________________________
(Name) (Name)
_____________________________________ __________________________________
(Title) (Title)
_____________________________________ __________________________________
(Date) (Date)
ADDRESS:
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
(City, State, Zip Code, Country)
3
<TABLE> <S> <C>
<PAGE>
<ARTICLE> 5
<S> <C>
<PERIOD-TYPE> 3-MOS
<FISCAL-YEAR-END> JAN-03-1998
<PERIOD-END> JUN-28-1997
<CASH> 316,758
<SECURITIES> 44,567
<RECEIVABLES> 128,366
<ALLOWANCES> 6,557
<INVENTORY> 0
<CURRENT-ASSETS> 548,396
<PP&E> 304,033
<DEPRECIATION> 115,350
<TOTAL-ASSETS> 833,248
<CURRENT-LIABILITIES> 241,071
<BONDS> 0
0
0
<COMMON> 342,621
<OTHER-SE> 220,445
<TOTAL-LIABILITY-AND-EQUITY> 833,248
<SALES> 398,015
<TOTAL-REVENUES> 398,015
<CGS> 82,491
<TOTAL-COSTS> 82,491
<OTHER-EXPENSES> 239,866
<LOSS-PROVISION> 0
<INTEREST-EXPENSE> 1,817
<INCOME-PRETAX> 93,669
<INCOME-TAX> 28,101
<INCOME-CONTINUING> 65,568
<DISCONTINUED> 0
<EXTRAORDINARY> 0
<CHANGES> 0
<NET-INCOME> 65,568
<EPS-PRIMARY> 0.64
<EPS-DILUTED> 0.64
</TABLE>
